Radical decomposition of hydrogen peroxide catalyzed by aqua complexes [M(H2O)n]2+ (M=Be, Zn, Cd)

Cobalt(II) Aqua Complex-Mediated Hydrogen Peroxide Activation: Possible Roles of HOOOH and Co(II)-OOOH Intermediates in Singlet Oxygen Generation

Density functional theory (DFT) calculations indicate that [CoII(H2O)6]2+ reacts with two H2O2 molecules to form [(H2O)4CoII(OOH)(H2O2)]+ reactant complexes, which decompose through three distinct pathways depending on the relative orientation between the coordinated -OOH and H2O2 ligands. The reactive intermediates produced via these activation pathways include hydroperoxyl (•OOH)/superoxide (O2•-) radicals, singlet oxygen (1O2), and Co(III) species [(H2O)5CoIII(O)]+, [(H2O)4CoIII(OH)2]+, and [(H2O)5CoIII(OH)]2+. The Co(III) species display from moderate to strong oxidizing abilities that have long been overlooked. Remarkably, our DFT calculations reveal the possible formation of hydrogen trioxide (HOOOH) and Co(II)-OOOH intermediates during [(H2O)4CoII(OOH)(H2O2)]+ decomposition and that the hydrolysis of these transient species is a route to 1O2 production. Because two of the three activation pathways do not involve changes in the oxidation state of the Co center, they may apply to other systems comprising redox-inert metal ions.

Enhanced Cd2+ removal from aqueous solution using olivine and magnesite combination: New insights into the mechanochemical synergistic effect

In this study, an efficient stabilizer material for cadmium (Cd2+) treatment was successfully prepared by simply co-milling olivine with magnesite. Several analytical methods including XRD, TEM, SEM and FTIR, combined with theoretical calculations (DFT), were used to investigate mechanochemical interfacial reaction between two minerals, and the reaction mechanism of Cd removal, with ion exchange between Cd2+ and Mg2+ as the main pathway. A fixation capacity of Cd2+ as high as 270.61 mg/g, much higher than that of the pristine minerals and even the individual/physical mixture of milled olivine and magnesite, has been obtained at optimized conditions, with a neutral pH value of the solution after treatment to allow its direct discharge. The as-proposed Mg-based stabilizer with various advantages such as cost benefits, green feature etc., will boosts the utilization efficiency of natural minerals over the elaborately prepared adsorbents.

The Roles of Oxidative Stress and Red Blood Cells in the Pathology of the Varicose Vein

This review discusses sources of reactive oxygen species, enzymatic antioxidant systems, and low molecular weight antioxidants. We present the pathology of varicose veins (VVs), including factors such as hypoxia, inflammation, dysfunctional endothelial cells, risk factors in varicose veins, the role of RBCs in venous thrombus formation, the influence of reactive oxygen species (ROS) and RBCs on VV pathology, and the role of hemoglobin in the damage of particles and macromolecules in VVs. This review discusses the production of ROS, enzymatic and nonenzymatic antioxidants, the pathogenesis of varicose veins as a pathology based on hypoxia, inflammation, and oxidative stress, as well as the participation of red blood cells in the pathology of varicose veins.

Alginate-based adsorbents with adjustable slit-shaped pore structure for selective removal of copper ions

Adopting effective and efficient techniques for the treatment of heavy metal pollution in water bodies plays an important role in guaranteeing the quality of water and the sustainable development of water resources. In this study, GO, MMT and SA were used as raw materials to compare the adsorption behaviors of three alginate-based adsorbents crosslinked with different valence metal ions (Ca2+, Fe3+ and Zr4+) on Cu(II). The aerogels were based on sodium alginate as the matrix material with unique slit-shaped pore structures formed by stacking effect of sheets and chemical bonding. It was found that the pore structures of the aerogels were denser and more orderly with the increase of the valence states of the crosslinked ions, and the affinity for Cu(II) in planar configuration was stronger. The Zr4+-GMSA aerogel had the maximum adsorption capacity of 126.68 mg/g and the Kd of Cu(II) was up to 50.80 L/g, which exhibited good preferential adsorption performance. The adsorption mechanism of Mn+-GMSA aerogels on Cu(II) was mainly ionic exchange, surface complexation and physical adsorption, which was explored by combining XPS and EDS characterizations of Mn+-GMSA before and after adsorption. This scheme can provide valuable and meaningful contribution to realize the selective recovery of Cu(II).

Ion exchange to immobilize Cd(II) at neutral pH into silicate matrix prepared by co-grinding kaolinite with calcium compounds

A novel silicate-based composite material was simply prepared by co-milling kaolinite and calcium compounds to endow the well studied clay minerals with active calcium for efficient removal of heavy metals. Batch experiments were carried out to investigate the main affecting factors such as raw material ratio, ball milling time, contact time, etc.. Even at a neutral solution pH, the silicate adsorbent exhibited excellent performance for the adsorption of Cd(II), reaching equilibrium in 30 min with a removal efficiency over 95%, and allowed a direct discharge of the treated solution without the need of acidic neutralization as usually used in the alkaline precipitation. A set of analytical methods including SEM/EDS and ²⁹Si MAS NMR etc. were used to analyze the adsorption mechanism of Cd(II), revealing that the adsorption process was mainly dominated by ion exchange to accommodate Cd ions inside silicate matrix, accompanied with partial hydroxide precipitation, rather than normally reported surface adsorption on pristine minerals. Furthermore, the as-prepared adsorption material exhibited similar excellent immobilization capacity for multiple heavy metals including Cu(II), Zn(II), Ni(II), Cd(II) and Mn(II). These findings provide a novel concept for the activation of the widely available cheap silicate minerals by the same widely available cheap calcium compounds and high contribution may be expected on its potentials to the environmental purification of heavy metal pollution in water and soil.

What Are the Oxidizing Intermediates in the Fenton and Fenton-like Reactions? A Perspective

The Fenton and Fenton-like reactions are of major importance due to their role as a source of oxidative stress in all living systems and due to their use in advanced oxidation technologies. For many years, there has been a debate whether the reaction of FeII(H2O)62+ with H2O2 yields OH• radicals or FeIV=Oaq. It is now known that this reaction proceeds via the formation of the intermediate complex (H2O)5FeII(O2H)+/(H2O)5FeII(O2H2)2+ that decomposes to form either OH• radicals or FeIV=Oaq, depending on the pH of the medium. The intermediate complex might also directly oxidize a substrate present in the medium. In the presence of FeIIIaq, the complex FeIII(OOH)aq is formed. This complex reacts via FeII(H2O)62+ + FeIII(OOH)aq → FeIV=Oaq + FeIIIaq. In the presence of ligands, the process often observed is Ln(H2O)5-nFeII(O2H) → L•+ + Ln-1FeIIIaq. Thus, in the presence of small concentrations of HCO3- i.e., in biological systems and in advanced oxidation processes-the oxidizing radical formed is CO3•-. It is evident that, in the presence of other transition metal complexes and/or other ligands, other radicals might be formed. In complexes of the type Ln(H2O)5-nMIII/II(O2H-), the peroxide might oxidize the ligand L without oxidizing the central cation M. OH• radicals are evidently not often formed in Fenton or Fenton-like reactions.

Sono-oxidative desulfurization of fuels using heterogeneous and homogeneous catalysts: A comprehensive review

Recently, environmental pollution has increased significantly due to petroleum-based fuels widely used in vehicles. This environmental pollution is mainly due to the acidic SO2 gas generated by the combustion of fuels and emitted into the atmosphere. SO2 gas causes not only acid rain but also corrosion of metal parts of engines in vehicles. In addition, it functions as a catalyst poison in catalytic converters in exhaust system. Due to these damages, strict regulations have been introduced to reduce the amount of sulfur in fuels. As of 2005, the permissible amount of sulfur in diesel fuels in Europe and America has been limited to 10 and 15 ppm by weight, respectively. Due to the decreasing oil reserves in the world, high viscosity petroleums containing high sulfur and heavier fractions (i.e., low-quality oils) are increasing, thus making desulfurization difficult and leading to high costly process. Since time and economic loss are very important today, these two terms have to be reduced to a minimum. Recently, ultrasound wave in ODS shown as an alternative to HDS is utilized to further increase desulfurization in shorter times. Ultrasound wave locally creates high temperatures and high pressures (hot-spot theory) in liquid, causing the desulfurization reaction to accelerate further. In this review, the advantages and difficulties of oxidative desulfurization, the economics of ultrasound-assisted oxidative desulfurization are summarized and recommendations for improving the process are presented.

Purification of Textile Effluents Containing C.I. Acid Violet 1: Adsorptive Removal versus Hydrogen Peroxide and Peracetic Acid Based Advanced Oxidation

Textile effluent containing azo dyes such as C.I. Acid Violet 1 (AV1) can be degraded to toxic aromatic amines in the environment. Thus, there is a legitimate need to treat such effluents before they are discharged to surface waters. Two methods were proposed to remove AV1 from aqueous solutions: adsorption and advanced oxidation processes (AOPs). The sorption capacity of the strongly basic anion exchanger Purolite A520E of the polystyrene matrix determined from the Langmuir isotherm model was found to be 835 mg/g, while that of Lewatit S5428 of the polyacrylamide matrix Freundlich model seems to be more appropriate for describing the experimental data. The pseudo-second-order kinetic model and external diffusion are the rate limiting steps of adsorption. The removal efficiency of AV1 by the anion exchangers was higher than 99% after 40 min of phase contact time. AOPs involved the usage of hydrogen peroxide and peracetic acid (PAA) as oxidizing agents, while Fe2+ and simulated sunlight were used as oxidizing activators. AV1 oxidation followed the pseudo-first-order kinetics, and the systems with the highest values of the rate constants turned out to be those in which Fe2+ was present. The efficiency of oxidation measured by the degree of decolorization in the systems with Fe2+ was higher than 99% after 10–60 min. AV1 mineralization was slower, but after 120 min of oxidation it was higher than 98% in the H2O2/Fe2+, PAA/Fe2+ and PAA/Fe2+/sunlight systems.

Influence of Varying Functionalization on the Peroxidase Activity of Nickel(II)–Pyridine Macrocycle Catalysts: Mechanistic Insights from Density Functional Theory

Nickel(II) complexes of mono-functionalized pyridine-tetraazamacrocycles (PyMACs) are a new class of catalysts that possess promising activity similar to biological peroxidases. Experimental studies with ABTS (2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), substrate) and H2O2 (oxidant) proposed that hydrogen-bonding and proton-transfer reactions facilitated by their pendant arm were responsible for their catalytic activity. In this work, density functional theory calculations were performed to unravel the influence of pendant arm functionalization on the catalytic performance of Ni(II)–PyMACs. Generated frontier orbitals suggested that Ni(II)–PyMACs activate H2O2 by satisfying two requirements: (1) the deprotonation of H2O2 to form the highly nucleophilic HOO−, and (2) the generation of low-spin, singlet state Ni(II)–PyMACs to allow the binding of HOO−. COSMO solvation-based energies revealed that the O–O Ni(II)–hydroperoxo bond, regardless of pendant arm type, ruptures favorably via heterolysis to produce high-spin (S = 1) [(L)Ni3+–O·]2+ and HO−. Aqueous solvation was found crucial in the stabilization of charged species, thereby favoring the heterolytic process over homolytic. The redox reaction of [(L)Ni3+–O·]2+ with ABTS obeyed a 1:2 stoichiometric ratio, followed by proton transfer to produce the final intermediate. The regeneration of Ni(II)–PyMACs at the final step involved the liberation of HO−, which was highly favorable when protons were readily available or when the pKa of the pendant arm was low.

Hormesis in plants under Cd exposure: From toxic to beneficial element?

Tolerance level to cadmium (Cd) toxicity is generally associated with reductions of the internal Cd accumulation in living organisms. In plants, Cd exposure frequently triggers negative effects on their growth and productivity. However, an increased number of studies has reported the improved performance of some plant species (or their accessions/genotypes/varieties/cultivars/clones) to Cd exposure, despite Cd accumulation in their roots and shoots. These results indicate that plants have developed protective strategies to neutralize the side-effects from Cd toxicity or, more controversially, mechanisms that employ Cd as beneficial element. Here, we gathered information about Cd-induced hormetic effects on plants, and explored the potential mechanisms that allow them to have a better performance under Cd exposure. The promotion of plant development depends on both direct and indirect Cd-induced alterations in the metabolism of plants and their surround environment. In addition, the mechanisms behind the positive Cd-induced transgenerational effects were also discussed in the present paper.

Metal Complexes Containing Redox-Active Ligands in Oxidation of Hydrocarbons and Alcohols: A Review

Ligands are innocent when they allow oxidation states of the central atoms to be defined. A noninnocent (or redox) ligand is a ligand in a metal complex where the oxidation state is not clear. Dioxygen can be a noninnocent species, since it exists in two oxidation states, i.e., superoxide (O2−) and peroxide (O22−). This review is devoted to oxidations of C–H compounds (saturated and aromatic hydrocarbons) and alcohols with peroxides (hydrogen peroxide, tert-butyl hydroperoxide) catalyzed by complexes of transition and nontransition metals containing innocent and noninnocent ligands. In many cases, the oxidation is induced by hydroxyl radicals. The mechanisms of the formation of hydroxyl radicals from H2O2 under the action of transition (iron, copper, vanadium, rhenium, etc.) and nontransition (aluminum, gallium, bismuth, etc.) metal ions are discussed. It has been demonstrated that the participation of the second hydrogen peroxide molecule leads to the rapture of O–O bond, and, as a result, to the facilitation of hydroxyl radical generation. The oxidation of alkanes induced by hydroxyl radicals leads to the formation of relatively unstable alkyl hydroperoxides. The data on regioselectivity in alkane oxidation allowed us to identify an oxidizing species generated in the decomposition of hydrogen peroxide: (hydroxyl radical or another species). The values of the ratio-of-rate constants of the interaction between an oxidizing species and solvent acetonitrile or alkane gives either the kinetic support for the nature of the oxidizing species or establishes the mechanism of the induction of oxidation catalyzed by a concrete compound. In the case of a bulky catalyst molecule, the ratio of hydroxyl radical attack rates upon the acetonitrile molecule and alkane becomes higher. This can be expanded if we assume that the reactions of hydroxyl radicals occur in a cavity inside a voluminous catalyst molecule, where the ratio of the local concentrations of acetonitrile and alkane is higher than in the whole reaction volume. The works of the authors of this review in this field are described in more detail herein.

Heterometallic CoIIIZnII Schiff Base Catalyst for Mild Hydroxylation of C(sp3)–H Bonds of Unactivated Alkanes: Evidence for Dual Mechanism Controlled by the Promoter

The novel Schiff base complex [CoIIIZnIIL3Cl2]·CH3OH (1) was synthesized by interaction of zinc powder, cobalt(II) chloride and methanol solution of the pre-formed HL in air (HL is the product of condensation of o-vanillin and methylamine) and characterized by IR, UV-Vis and NMR spectroscopy, ESI-MS and single crystal X-ray diffraction analysis. In the heterometallic core of 1 the two metal centers are bridged by deprotonated phenoxy groups of the L− ligands with the cobalt-zinc separation of 3.123 Å. Catalytic investigations demonstrated a pronounced activity of 1 towards mild alkane oxidation with m-chloroperbenzoic acid (m-CPBA) as an oxidant and cis-1,2-dimethylcyclohexane (cis-1,2-DMCH) as the model substrate. The influence of the nature of different promoting agents of various acidities (from HOTf to pyridine) on the catalytic process was studied in detail and a pronounced activity of 1 in the presence of nitric acid promoter was found, also showing a high retention of stereoconfiguration of the substrate (>99% for cis-1,2-DMCH). The best achieved yield of tertiary cis-alcohol based on the oxidant was 61%, with a turnover number (TON) of 198 for nitric acid as promoter. The 18O-incorporations into the alcohols when the reactions were performed under 18O2 atmosphere using acetic and nitric acid promoters, suggest that the cis-1,2-DMCH hydroxylation proceeds by two distinct pathways, a non-stereoselective and a stereoselective one (with and without involvement of a long-lived free carbon radical, respectively). The former dominates in the case of acetic acid promoter and the latter is realized in the case of HNO3 promoter.

Vanadium complexes of different nuclearities in the catalytic oxidation of cyclohexane and cyclohexanol – an experimental and theoretical investigation

Catalytic activities of oxidovanadium(v) complexes towards microwave-assisted peroxidative oxidation of cyclohexane and cyclohexanol are explored by experimental and DFT calculations.

Cadmium toxicity degree on tomato development is associated with disbalances in B and Mn status at early stages of plant exposure

Cadmium (Cd) toxicity is frequently coupled to its accumulation in plants, but not always the highest Cd concentration triggers the worst damages, indicating that additional events influence the magnitude of Cd side-effects. We investigated the early mechanisms behind the differential Cd-induced impacts on plant development of four tomato accessions with contrasting tolerance to Cd toxicity. At organ level, the highest Cd concentration was not associated with the largest biomass losses. In leaves, changes in superoxide dismutase and catalase activities were not related to differences in Cd concentration, which was unable to provoke H₂O₂ overproduction on the sixth day of plant exposure to this metal. Further investigation in the mineral profile revealed that magnitude of Cd toxicity depends probably on synergic effects from increased B status, in addition to the own Cd accumulation. Furthermore, disbalances in Mn status (i.e., excess in leaves and deficiency in roots) may enhance Cd toxicity degree. According to data, however, the low magnesium (Mg) status can be linked to tomato tolerance against Cd toxicity. In conclusion, the tomato tolerance degree under short-Cd exposure depends on actively, finely regulation of mineral homeostasis that results in different development of plant organs. The better understanding on the mode of action of Cd toxicity in plants can help in the establishment of strategies to mitigate its impacts on crop yield.

Oxidative functionalization of C–H compounds induced by the extremely efficient osmium catalysts (a review)

In recent years, osmium complexes have found applications not only in thecis-hydroxylation of olefins but also very efficient in the oxygenation of C–H compounds (saturated and aromatic hydrocarbons and alcohols) by hydrogen peroxide as well as organic peroxides.

New oxidovanadium(iv) complex with a BIAN ligand: synthesis, structure, redox properties and catalytic activity

The combination of a new oxidovanadium(iv) complex1with pyrazine-2-carboxylic acid (PCA; a cocatalyst) affords a catalytic system for the efficient oxidation of saturated hydrocarbons.

PtrA/NINV, an alkaline/neutral invertase gene of Poncirus trifoliata, confers enhanced tolerance to multiple abiotic stresses by modulating ROS levels and maintaining photosynthetic efficiency

BACKGROUND

Alkaline/neutral invertase (A/N-INV), an enzyme that hydrolyzes sucrose irreversibly into glucose and fructose, is essential for normal plant growth,development, and stress tolerance. However, the physiological and/or molecular mechanism underpinning the role of A/N-INV in abiotic stress tolerance is poorly understood.

RESULTS

In this report, an A/N-INV gene (PtrA/NINV) was isolated from Poncirus trifoliata, a cold-hardy relative of citrus, and functionally characterized. PtrA/NINV expression levels were induced by cold, salt, dehydration, sucrose, and ABA, but decreased by glucose. PtrA/NINV was found to localize in both chloroplasts and mitochondria. Overexpression of PtrA/NINV conferred enhanced tolerance to multiple stresses, including cold, high salinity, and drought, as supported by lower levels of reactive oxygen species (ROS), reduced oxidative damages, decreased water loss rate, and increased photosynthesis efficiency, relative to wild-type (WT). The transgenic plants exhibited higher A/N-INV activity and greater reducing sugar content under normal and stress conditions.

CONCLUSIONS

PtrA/NINV is an important gene implicated in sucrose decomposition, and plays a positive role in abiotic stress tolerance by promoting osmotic adjustment, ROS detoxification and photosynthesis efficiency. Thus, PtrA/NINV has great potential to be used in transgenic breeding for improvement of stress tolerance.

Oxidation of olefins with H2O2 catalysed by salts of group III metals (Ga, In, Sc, Y and La): epoxidation versus hydroperoxidation

Simple soluble salts of the group III metals (Ga, In, Sc, Y and La) exhibit catalytic activity towards oxidation of olefins with H₂O₂via two competitive channels (i.e. allylic hydroperoxidation and epoxidation).

Simple soluble Bi(iii) salts as efficient catalysts for the oxidation of alkanes with H2O2

Simple soluble Bi(iii) salts exhibit pronounced catalytic activity in the oxidation of inert alkanes with H₂O₂via a radical mechanism with participation of the HO˙ radicals.

Lanthanide derivatives comprising arylhydrazones of β-diketones: cooperative E/Z isomerization and catalytic activity in nitroaldol reaction

RAHB and ionic interaction assisted E/Z→E isomerization of arylhydrazone of β-diketone is reported.