Limonene epoxidation with H 2 O 2 promoted by Al 2 O 3 : Kinetic study, experimental design

DFT Studies of the Activity and Reactivity of Limonene in Comparison with Selected Monoterpenes

Nowadays, the effective processing of natural monoterpenes that constitute renewable biomass found in post-production waste into products that are starting materials for the synthesis of valuable compounds is a way to ensure independence from non-renewable fossil fuels and can contribute to reducing global carbon dioxide emissions. The presented research aims to determine, based on DFT calculations, the activity and reactivity of limonene, an organic substrate used in previous preparative analyses, in comparison to selected monoterpenes such as cymene, pinene, thymol, and menthol. The influence of the solvent model was also checked, and the bonds most susceptible to reaction were determined in the examined compounds. With regard to EHOMO, it was found that limonene reacts more easily than cymene or menthol but with more difficultly than thymol and pienene. The analysis of the global chemical reactivity descriptors "locates" the reactivity of limonene in the middle of the studied monoterpenes. It was observed that, among the tested compounds, the most reactive compound is thymol, while the least reactive is menthol. The demonstrated results can be a reference point for experimental work carried out using the discussed compounds, to focus research on those with the highest reactivity.

Recent advances in catalytic and non-catalytic epoxidation of terpenes: a pathway to bio-based polymers from waste biomass

Epoxides derived from waste biomass are a promising avenue for the production of bio-based polymers, including polyamides, polyesters, polyurethanes, and polycarbonates. This review article explores recent efforts to develop both catalytic and non-catalytic processes for the epoxidation of terpene, employing a variety of oxidizing agents and techniques for process intensification. Experimental investigations into the epoxidation of limonene have shown that these methods can be extended to other terpenes. To optimize the epoxidation of bio-based terpene, there is a need to develop continuous processes that address limitations in mass and heat transfer. This review discusses flow chemistry and innovative reactor designs as part of a multi-scale approach aimed at industrial transformation. These methods facilitate continuous processing, improve mixing, and either eliminate or reduce the need for solvents by enhancing heat transfer capabilities. Overall, the objective of this review is to contribute to the development of commercially viable processes for producing bio-based epoxides from waste biomass.

Modified boehmite: a choice of catalyst for the selective conversion of glycerol to five-membered dioxolane

The catalytic activity of WO3@boehmite for the acetalization of glycerol with aromatic aldehydes is described in this article. The catalyst is selective towards dioxolane (up to 96%) with excellent conversion (up to 100%) in selective substrates.

Stereospecific Epoxidation of Limonene Catalyzed by Peroxygenase from Oat Seeds

Limonene is one of the most abundant naturally occurring cyclic monoterpenes and has recently emerged as a sustainable alternative to petroleum-based solvents as well as a chemical platform for the production of value-added compounds. The biocatalytic epoxidation of both enantiomers of limonene was carried out in the presence of a peroxygenase-containing preparation from oat (Avena sativa) flour. Different reaction profiles were observed depending on the starting enantiomer of limonene, but in both cases the 1,2-monoepoxide was obtained as the main product with excellent diastereoselectivity. Trans-1,2-monoepoxide and cis-1,2-monoepoxide were isolated from the reaction of (R)-limonene and (S)-limonene, respectively, and the reactions were scaled-up to 0.17 M substrate concentration. The process is valuable for operational simplicity, lack of toxic metal catalysts, and cost-effectiveness of the enzymatic source. Pure stereoisomers of 1,2-monoepoxides of limonene constitute a useful starting material for biorenewable polymers, but can be also converted into other chiral derivatives by epoxide ring opening with nucleophiles. As a proof of concept, a tandem protocol for the preparation of enantiopure (1S,2S,4R)-1,2-diol from (R)-limonene and (1R,2R,4S)-1,2-diol from (S)-limonene was developed.

Interactions of Some Chemotherapeutic Agents as Epirubicin, Gemcitabine and Paclitaxel in Multicomponent Systems Based on Orange Essential Oil

In order to anticipate the effect induced by a natural product on the chemical activity of medicines simultaneously administered, spontaneous interactions of certain cancer treatment drugs such as, epirubicin (EPR), gemcitabine (GCT), and paclitaxel (PTX) with limonene (LIM)—a natural compound extracted from orange peel and known as an anticancer agent—were investigated. To estimate the stability of the drugs over time, a current density of 50 mA cm⁻² was applied as an external stimulus between two platinum electrodes immersed in hydrochloric acid solution containing ethyl alcohol/water in the volume ratio of 2/3, in the absence and presence of orange essential oil (limonene concentration of 95%). The concentration variation of chemotherapeutic agents over time was evaluated by UV-Vis spectrophotometry. Kinetic studies have shown a delay in the decomposition reaction of epirubicin and gemcitabine and a paclitaxel activity stimulation. Thus, in the presence of limonene, the epirubicin half-life increased from 46.2 min to 63 min, and from 6.2 min to 8.6 min in gemcitabine case, while for paclitaxel a decrease of half-life from 35.9 min to 25.8 min was determined. Therefore, certain drug-limonene interactions took place, leading to the emergence of molecular micro-assemblies impacting decomposition reaction of chemotherapeutics. To predict drug–limonene interactions, the Autodock 4.2.6 system was employed. Thus, two hydrophobic interactions and five π-alkyl interactions were established between EPR-LIM, the GCT-LIM connection involves four π-alkyl interactions, and the PTX-LIM bridges take place through three hydrophobic interactions and the one π-alkyl. Finally, the decomposition reaction mechanism of drugs was proposed.

Use of semibatch reactor technology for the investigation of reaction mechanism and kinetics: Heterogeneously catalyzed epoxidation of fatty acid esters

•

Greener and safer production of epoxidized vegetable oil.

•

Positive effect of semibatch operation on the reaction performance.

•

Kinetic modelling based on plausible mechanism for the alumina catalyzed epoxidation.

Heterogeneously catalyzed epoxidation of vegetable oils by hydrogen peroxide represents a greener route for the production of epoxides and a thermally safer reaction route compared to the classical Prileschajew epoxidation approach. The epoxidation kinetics of the heterogeneous system formed by aluminium oxide catalyst, hydrogen peroxide and methyl oleate as a model compound was studied with semibatch experiments in laboratory scale. It was found that semibatch operation improved the performance significantly compared to classical batch operation, a low and constant volumetric flowrate of hydrogen peroxide increased the final oxirane yield considerably. A semibatch reactor model and a kinetic model were developed, featuring the reaction temperature, the reactant molar ratio, the catalyst loading and the mass flow rate as the most significant experimental parameters. The mathematical model was able to well describe the experimental data. The approach can be applied to other liquid–solid catalyst systems in future in order to optimize the semibatch operation policy for complex reaction systems.

Kinetic investigation of aerobic epoxidation of limonene over cobalt substituted mesoporous SBA-16

Incorporation of low coordination Co²⁺ within the structure of mesoporous silica SBA-16 has been accomplished through a facile and green “pH adjusting” method.

Catalytic Oxidation Processes for the Upgrading of Terpenes: State-of-the-Art and Future Trends

Terpenic olefins constitute a relevant platform of renewable molecules, which could be used as key intermediates for the perfumery, flavoring, and pharmaceutical industries. The upgrading of these cheap and available agro-resources through catalytic oxidation processes remains of great interest, leading to the formation of either epoxides via the oxidation of the olefinic bond or α,β-unsaturated ketones by the Csp3-H functionalization at the α-position of the double bond. This critical review summarizes some of the most relevant homogeneous or heterogeneous catalysts designed for the oxidation of some abundant terpenic olefins in the last decade (2008–2018).

A mononuclear tantalum catalyst with a peroxocarbonate ligand for olefin epoxidation in compressed CO2

A mononuclear tantalum complex bonded to a peroxocarbonate ligand has been proved to be particularly important in the epoxidation reactions.

Photocatalytic partial oxidation of limonene to 1,2 limonene oxide

The silylation of crystalline TiO₂ P25, commonly used for photocatalytic degradation of pollutants, results in an exceptionally selective catalyst for the aerobic limonene epoxidation to 1,2-limonene oxide under solar light irradiation. The hypothesized mechanism involves the singlet oxygen generated through energy transfer from the excited TiO₂ to adsorbed O₂ molecules. The reaction product is the valued precursor of bio-based poly(limonene carbonate), a thermoplastic polymer of superior thermal and optical properties whose industrial production is in need of an efficient green synthesis of limonene oxide.

Development of a selective, solvent-free epoxidation of limonene using hydrogen peroxide and a tungsten-based catalyst

Kinetic and modelling of the highly selective epoxidation of limonene with hydrogen peroxide (H₂O₂) in a solvent-free environment.