A Au/Cu 2 O–TiO 2 system for photo-catalytic hydrogen production. A pn-junction effect or a simple case of in situ reduction?

Enhanced performance of glycerol electro-oxidation in alkaline media using bimetallic Au-Cu NPs supported by MWCNTs and reducible metal oxides

Electrochemical technologies for valorizing glycerol, a byproduct of biodiesel production, into electric energy and value-added chemical products continue to be technologically and economically challenging. In this field, an ongoing challenge is developing more active, stable, and low-cost heterogeneous catalysts for the glycerol electro-oxidation reaction (GlyEOR). This paper reports the influence of the preparation procedure, which involves intermatrix synthesis (Cu and Au NPs), followed by galvanic displacement (Cu-Au NPs) in previously functionalized multi-walled carbon nanotubes (MWCNTs). It also discusses the role of the supports, CeO₂ NPs, and TiO₂ NPs, obtained by a hydrothermal microwave-assisted procedure, on the electroactivity of a hybrid bimetallic Cu-Au/MWCNT/MO₂ catalyst in the GlyEOR in alkaline media. The electrocatalytic behavior was studied and discussed in terms of structure, composition, and electroactivity of the synthesized materials, which were determined by Fourier-transform infrared spectroscopy (FTIR), flame atomic absorption spectroscopy (FAAS), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), X-ray photoelectronic spectroscopy (XPS), and cyclic voltammetry (CV). In addition, the role of the oxidation states of Cu and Au in the as-prepared catalysts (Cu/MWCNT, Au/MWCNT, Cu-Au/MWCNT, Cu-Au/MWCNT-CeO₂, and Cu-Au/MWCNT-TiO₂) was demonstrated. It was concluded that the preparation method of metal NPs for the controlled formation of the most catalytically active oxidation states of Cu and Au, together with the presence of a conductive and oxophilic microenvironment provided by carbon nanotubes and facile reducible oxides in optimized compositions, allows for an increase in the catalytic performance of synthesized catalysts in the GlyEOR.

Enhanced solar water splitting using plasmon-induced resonance energy transfer and unidirectional charge carrier transport

Solar water splitting by photoelectrochemical (PEC) reactions is promising for hydrogen production. The gold nanoparticles (AuNPs) are often applied to promote the visible response of wideband photocatalysts. However, in a typical TiO₂/AuNPs structure, the opposite transfer direction of excited electrons between AuNPs and TiO₂ under visible light and UV light severely limits the solar PEC performance. Here we present a unique Pt/TiO₂/Cu₂O/NiO/AuNPs photocathode, in which the NiO hole transport layer (HTL) is inserted between AuNPs and Cu₂O to achieve unidirectional transport of charge carriers and prominent plasmon-induced resonance energy transfer (PIRET) between AuNPs and Cu₂O. The measured applied bias photon-to-current efficiency and the hydrogen production rate under AM 1.5G illumination can reach 1.5% and 16.4 μmol·cm^-2·h^-1, respectively. This work is original in using the NiO film as the PIRET spacer and provides a promising photoelectrode for energy-efficient solar water splitting.

Charge Carrier Processes and Optical Properties in TiO2 and TiO2-Based Heterojunction Photocatalysts: A Review

Photocatalysis based technologies have a key role in addressing important challenges of the ecological transition, such as environment remediation and conversion of renewable energies. Photocatalysts can in fact be used in hydrogen (H₂) production (e.g., via water splitting or photo-reforming of organic substrates), CO₂ reduction, pollution mitigation and water or air remediation via oxidation (photodegradation) of pollutants. Titanium dioxide (TiO₂) is a “benchmark” photocatalyst, thanks to many favorable characteristics. We here review the basic knowledge on the charge carrier processes that define the optical and photophysical properties of intrinsic TiO₂. We describe the main characteristics and advantages of TiO₂ as photocatalyst, followed by a summary of historical facts about its application. Next, the dynamics of photogenerated electrons and holes is reviewed, including energy levels and trapping states, charge separation and charge recombination. A section on optical absorption and optical properties follows, including a discussion on TiO₂ photoluminescence and on the effect of molecular oxygen (O₂) on radiative recombination. We next summarize the elementary photocatalytic processes in aqueous solution, including the photogeneration of reactive oxygen species (ROS) and the hydrogen evolution reaction. We pinpoint the TiO₂ limitations and possible ways to overcome them by discussing some of the “hottest” research trends toward solar hydrogen production, which are classified in two categories: (1) approaches based on the use of engineered TiO₂ without any cocatalysts. Discussed topics are highly-reduced “black TiO₂”, grey and colored TiO₂, surface-engineered anatase nanocrystals; (2) strategies based on heterojunction photocatalysts, where TiO₂ is electronically coupled with a different material acting as cocatalyst or as sensitizer. Examples discussed include TiO₂ composites or heterostructures with metals (e.g., Pt-TiO₂, Au-TiO₂), with other metal oxides (e.g., Cu₂O, NiO, etc.), direct Z-scheme heterojunctions with g-C₃N₄ (graphitic carbon nitride) and dye-sensitized TiO₂.

Fabrication of a Cu2O-Au-TiO2 Heterostructure with Improved Photocatalytic Performance for the Abatement of Hazardous Toluene and α-Pinene Vapors

In the current research, a Cu2O-Au-TiO2 heterostructure was fabricated via a step-wise photodeposition route to determine its possible application in the photocatalytic oxidation of hazardous vapors. The results of electron microscopy and X-ray photoelectron spectroscopy confirm the successful fabrication of the Cu2O-Au-TiO2 heterostructure. Strong absorption in the visible region, along with a slight red-shift in the absorption edge, was observed in the UV–vis diffuse reflectance spectrum of Cu2O-Au-TiO2 composite, which implies that the composite can generate a greater number of photoexcited charges necessary for photocatalytic reaction. Toluene and α-pinene, as common gas contaminants in the indoor atmosphere, were employed to assess the photooxidation efficiency of the Cu2O-Au-TiO2 composite. Importantly, photocatalytic activity results indicate that the Cu2O-Au-TiO2 composite showed excellent photodegradation performance compared to pure TiO2 and Cu2O-TiO2 and Au-TiO2, where photocatalytic efficiency was approximately 92.9% and 99.9% for toluene and α-pinene, respectively, under standard daylight illumination. The increased light-harvesting capacity and boosted separation efficiency of electron-hole pairs were mainly accountable for improved degradation performance of the Cu2O-Au-TiO2 composite. In addition, the degradation efficiencies for toluene and α-pinene by the Cu2O-Au-TiO2 composite were also examined under three different light sources: 0.32 W white, blue and violet LEDs. The findings of this work suggested a great promise of effective photooxidation of gas pollutants by the Cu2O-Au-TiO2 composite.

Dewetting of PtCu Nanoalloys on TiO2 Nanocavities Provides a Synergistic Photocatalytic Enhancement for Efficient H2 Evolution

We investigate the co-catalytic activity of PtCu alloy nanoparticles for photocatalytic H₂ evolution from methanol-water solutions. To produce the photocatalysts, a few-nanometer-thick Pt-Cu bilayers are deposited on anodic TiO₂ nanocavity arrays and converted by solid-state dewetting via a suitable thermal treatment into bimetallic PtCu nanoparticles. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results prove the formation of PtCu nanoalloys that carry a shell of surface oxides. X-ray absorption near-edge structure (XANES) data support Pt and Cu alloying and indicate the presence of lattice disorder in the PtCu nanoparticles. The PtCu co-catalyst on TiO₂ shows a synergistic activity enhancement and a significantly higher activity toward photocatalytic H₂ evolution than Pt- or Cu-TiO₂. We propose the enhanced activity to be due to Pt-Cu electronic interactions, where Cu increases the electron density on Pt, favoring a more efficient electron transfer for H₂ evolution. In addition, Cu can further promote the photoactivity by providing additional surface catalytic sites for hydrogen recombination. Remarkably, when increasing the methanol concentration up to 50 vol % in the reaction phase, we observe for PtCu-TiO₂ a steeper activity increase compared to Pt-TiO₂. A further increase in methanol concentration (up to 80 vol %) causes for Pt-TiO₂ a clear activity decay, while PtCu-TiO₂ still maintains a high level of activity. This suggests improved robustness of PtCu nanoalloys against poisoning from methanol oxidation products such as CO.

Inverse iron oxide/metal catalysts from galvanic replacement

Key chemical transformations require metal and redox sites in proximity at interfaces; however, in traditional oxide-supported materials, this requirement is met only at the perimeters of metal nanoparticles. We report that galvanic replacement can produce inverse FeO_x/metal nanostructures in which the concentration of oxide species adjoining metal domains is maximal. The synthesis involves reductive deposition of rhodium or platinum and oxidation of Fe²⁺ from magnetite (Fe₃O₄). We discovered a parallel dissolution and adsorption of Fe²⁺ onto the metal, yielding inverse FeO_x-coated metal nanoparticles. This nanostructure exhibits the intrinsic activity in selective CO₂ reduction that simple metal nanoparticles have only at interfaces with the support. By enabling a simple way to control the surface functionality of metal particles, our approach is not only scalable but also enables a versatile palette for catalyst design.

While typical catalysts involve oxide-supported metals, inverse catalysts of oxides on metal supports offer an attractive alternative. Here, authors prepare FeO_x-coated Rh nanoparticles via galvanic replacement and dissolution-precipitation to form effective CO₂ reduction catalysts.

Enhanced sensing of hazardous 4-nitrophenol by a graphene oxide–TiO2 composite: environmental pollutant monitoring applications

The accurate detection of hazardous 4-nitrophenol (4-NP) is deemed essential for the environment and human health.

Hollow core/shell β-Bi2O3@WS2 p–n heterojunction for efficient photocatalytic degradation of fluoroquinolones: a theoretical and experimental study

An efficient visible-light-driven β-Bi₂O₃@WS₂ p–n core–shell heterostructure was rationally designed using theoretical calculations and then fabricated via a facile self-assembly method.

Synthesis of Plasmonic Photocatalysts for Water Splitting

Production of H2, O2, and some useful chemicals by solar water splitting is widely expected to be one of the ultimate technologies in solving energy and environmental problems worldwide. Plasmonic enhancement of photocatalytic water splitting is attracting much attention. However, the enhancement factors reported so far are not as high as expected. Hence, further investigation of the plasmonic photocatalysts for water splitting is now needed. In this paper, recent work demonstrating plasmonic photocatalytic water splitting is reviewed. Particular emphasis is given to the fabrication process and the morphological features of the plasmonic photocatalysts.

Multiplasmon modes for enhancing the photocatalytic activity of Au/Ag/Cu2O core-shell nanorods

One of the critical challenges for semiconductor photocatalysis is the high efficiency utilization of solar energy. For plasmonic metal-semiconductor photocatalysts, the photocatalytic activity over an extended wavelength range for a photoresponsive semiconductor could be significantly improved either via the direct electron transfer (DET) or via the plasmon-induced resonant energy transfer (PIRET). Still, the narrow spectral overlap of plasmon and the semiconductor band edge is a key factor in restricting the development of PIRET. Herein, we have introduced a simple and versatile strategy to realize a broad spectral overlap by creating multipolar plasmon resonances near the semiconductor band edge. Cu₂O coated Au/Ag nanorods (NRs) were prepared using a facile wet chemistry method. Transverse plasmon modes of Au/Ag/Cu₂O NRs can split into dipole and octupole plasmon modes. The core aspect ratio and shell thickness could be used to regulate these two modes for extending the spectral overlap of plasmon resonance and the Cu₂O band edge. Au/Ag/Cu₂O NRs were found to display enhanced visible light photocatalytic activity compared to spherical Au/Ag/Cu₂O nanoparticles. The enhancement mechanism was ascribed to both dipole and octupole plasmon modes boosting electron-hole separation in Cu₂O via PIRET as confirmed by transient absorption measurements.

Dual Cocatalysts in TiO2 Photocatalysis

Semiconductor photocatalysis is recognized as a promising strategy to simultaneously address energy needs and environmental pollution. Titanium dioxide (TiO₂ ) has been investigated for such applications due to its low cost, nontoxicity, and high chemical stability. However, pristine TiO₂ still suffers from low utilization of visible light and high photogenerated-charge-carrier recombination rate. Recently, TiO₂ photocatalysts modified by dual cocatalysts with different functions have attracted much attention due to the extended light absorption, enhanced reactant adsorption, and promoted charge-carrier-separation efficiency granted by various cocatalysts. Recent progress on the component and structural design of dual cocatalysts in TiO₂ photocatalysts is summarized. Depending on their components, dual cocatalysts decorated on TiO₂ photocatalysts can be divided into the following categories: bimetallic cocatalysts, metal-metal oxide/sulfide cocatalysts, metal-graphene cocatalysts, and metal oxide/sulfide-graphene cocatalysts. Depending on their architecture, they can be categorized into randomly deposited binary cocatalysts, facet-dependent selective-deposition binary cocatalysts, and core-shell structural binary cocatalysts. Concluding perspectives on the challenges and opportunities for the further exploration of dual cocatalyst-modified TiO₂ photocatalysts are presented.

Synthetic strategies and application of gold-based nanocatalysts for nitroaromatics reduction

With the increasing requirement of efficient organic transformations on the basic concept of Green Sustainable Chemistry, the development of highly efficient catalytic reaction system is greatly desired. In this case, gold (Au)-based nanocatalysts are promising candidates for catalytic reaction, especially for the reduction of nitroaromatics. They have attracted wide attention and well developed in the application of nitroaromatics reduction because of the unique properties compared with that of other conventional metal-based catalysts. With this respect, this review proposes recent trends in the application of Au nanocatalysts for efficient reduction process of nitroaromatics. Some typical approaches are compared and discussed to guide the synthesis of highly efficient Au nanocatalysts. The mechanism on the use of H₂ and NaBH₄ solution as the source of hydrogen is compared, and that proposed under light irradiation is discussed. The high and unique catalytic activity of some carriers, such as oxides and carbons-based materials, based on different sizes, structures, and shapes of supported Au nanocatalysts for nitroaromatics reduction are described. The catalytic performance of Au combining with other metal nanoparticles by alloy or doping, like multi-metal nanoparticles system, is further discussed. Finally, a short discussion is introduced to compare the catalysis with other metallic nanocatalysts.

One-pot synthesis of Cu2O/C@H-TiO2 nanocomposites with enhanced visible-light photocatalytic activity

As an environment-friendly semiconductor, titanium dioxide (TiO₂), which can effectively convert solar energy to chemical energy, is a crucial material in solar energy conversion research. However, it has several technical limitations for environment protection and energy industries, such as low photocatalytic efficiency and a narrow spectrum response. In this study, a unique mesoporous Cu₂O/C@H-TiO₂ nanocomposite is proposed to solve these issues. Polystyrene beads ((C₈H₈)_n, PS) are utilized as templates to prepare TiO₂ hollow microspheres. Cu₂O nanocomposites and amorphous carbon are deposited by a one-pot method on the surface of TiO₂ hollow spheres. After the heterojunction is formed between the two semiconductor materials, the difference in energy levels can effectively separate the photogenerated e⁻–h⁺ pairs, thereby greatly improving the photocatalytic efficiency. Furthermore, due to the visible band absorption of Cu₂O, the absorption range of the prepared nanocomposites is expanded to the whole solar spectrum. Amorphous carbon, as a Cu₂O reduction reaction concomitant product, can further improve the electron conduction characteristics between Cu₂O and TiO₂. The structure and chemical composition of the obtained nanocomposites are characterized by a series of techniques (such as SEM, EDS, TEM, XRD, FTIR, XPS, DRS, PL, MS etc.). The experimental results of the degradation of methylene blue (MB) aqueous solution demonstrate that the degradation efficiency of Cu₂O/C@H-TiO₂ nanocomposites is about 3 times as fast as that of pure TiO₂ hollow microspheres, and a more absolute degradation can be achieved. Herein, a recyclable photocatalyst with high degradation efficiency and a whole solar spectrum response is proposed and fabricated, and would find useful applications in environment protection, and optoelectronic devices.

As an environment-friendly semiconductor, titanium dioxide (TiO₂), which can effectively convert solar energy to chemical energy, is a crucial material in solar energy conversion research.

Cu-Doped TiO2: Visible Light Assisted Photocatalytic Antimicrobial Activity

Surface contamination by microbes is a major public health concern. A damp environment is one of potential sources for microbe proliferation. Smart photocatalytic coatings on building surfaces using semiconductors like titania (TiO2) can effectively curb this growing threat. Metal-doped titania in anatase phase has been proven as a promising candidate for energy and environmental applications. In this present work, the antimicrobial efficacy of copper (Cu)-doped TiO2 (Cu-TiO2) was evaluated against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) under visible light irradiation. Doping of a minute fraction of Cu (0.5 mol %) in TiO2 was carried out via sol-gel technique. Cu-TiO2 further calcined at various temperatures (in the range of 500–700 °C) to evaluate the thermal stability of TiO2 anatase phase. The physico-chemical properties of the samples were characterized through X-ray diffraction (XRD), Raman spectroscopy, X-ray photo-electron spectroscopy (XPS) and UV–visible spectroscopy techniques. XRD results revealed that the anatase phase of TiO2 was maintained well, up to 650 °C, by the Cu dopant. UV–vis results suggested that the visible light absorption property of Cu-TiO2 was enhanced and the band gap is reduced to 2.8 eV. Density functional theory (DFT) studies emphasize the introduction of Cu+ and Cu2+ ions by replacing Ti4+ ions in the TiO2 lattice, creating oxygen vacancies. These further promoted the photocatalytic efficiency. A significantly high bacterial inactivation (99.9999%) was attained in 30 min of visible light irradiation by Cu-TiO2.

Construction of Plasmonic Ag and Nitrogen-Doped Graphene Quantum Dots Codecorated Ultrathin Graphitic Carbon Nitride Nanosheet Composites with Enhanced Photocatalytic Activity: Full-Spectrum Response Ability and Mechanism Insight

The full utilization of solar energy has attracted great attention in the photocatalysis and environmental pollutant control. In this study, the local surface plasmon resonance effect of Ag nanoparticles (Ag NPs) with the upconversion property of nitrogen-doped graphene quantum dots (N-GQDs) was first combined for the formation of ternary Ag/N-GQDs/g-C₃N₄ nanocomposites. The prepared material presents enhanced full-spectrum light response ability, even in near-infrared (NIR) light. The experiment results disclosed that the 0.5% N-GQDs and 2.0% Ag NPs co-doped g-C₃N₄ show the highest photocatalytic activity, achieving 92.8 and 31.3% removal efficiency under full-spectrum light and NIR light irradiation, respectively, which was three-fold than that of pristine g-C₃N₄. The boosted photocatalytic activity can be attributed to the synergistic effect among the g-C₃N₄, N-GQDs, and Ag NPs. The g-C₃N₄ nanosheets can serve as the reaction matrix and support for the dispersion of N-GQDs and Ag NPs, inhibiting their agglomeration. The existence of Ag NPs and N-GQDs can promote the light absorption and transfer ability, leading to the generation of more photoinduced charges. Simultaneously, N-GQDs and Ag NPs can efficiently transfer and reserve electrons, which can accelerate the photoinduced electrons' migration, inhibiting the recombination. The comprehensive effect of the reasons mentioned above resulted in the unique photocatalytic activity of the prepared Ag/N-GQDs/g-C₃N₄ nanocomposites. This study provides a new strategy for the formation of highly efficient photocatalysts with broad-spectrum light response ability and the potential for realistic wastewater pollution control.

Up-conversion luminescence coupled to plasmonic gold nanorods for light harvesting and hydrogen production

The conversion of infrared light to visible-light which allows a larger fraction of sun-light to be used is needed to improve light-harvesting. In this work a tri-functional material composed of an up-converter (NaYF₄-Yb-Tm), plasmonic gold nanorods and CdS was made photocatalytically active using 980 nm wavelength light for the reduction of H⁺ to H₂.

Hydrogen production by tailoring the brookite and Cu2O ratio of sol-gel Cu-TiO2 photocatalysts

Cu-TiO₂ photocatalysts were prepared by the sol-gel method. Copper loadings from, 1.0 to 5.0 wt % were used. The materials were annealed at different temperatures (from 400 to 600 °C) to study the formation of brookite and copper ionic species. The photocatalysts were characterized by X-ray diffraction, UV-vis, Raman and XPS spectroscopies, H₂-temperature programmed reduction (TPR), N₂ physisorption, and SEM-EDS to quantify the actual copper loadings and characterize morphology. The photocatalysts were evaluated during the hydrogen photocatalytic production using an ethanolic solution (50% v/v) under UV and visible radiation. The best hydrogen production was performed by Ti-Cu 1.0 with an overall hydrogen production that was five times higher than that obtained with photolysis. This sample had an optimal thermal treatment at 500 °C, and at this temperature, the Cu₂O and brookite/anatase ratio boosted the photocatalytic production of hydrogen. In addition, a deactivation test was carried out for the most active sample (TiO₂-Cu 1.0), showing unchanged H₂ production for three cycles with negligible Cu lixiviation. The activity of hydrogen-through-copper production reported in this research work is comparable with the one featured by noble metals and that reported in the literature for doped TiO₂ materials.

Oxygen Vacancies in Shape Controlled Cu2O/Reduced Graphene Oxide/In2O3 Hybrid for Promoted Photocatalytic Water Oxidation and Degradation of Environmental Pollutants

A novel shape controlled Cu₂O/reduced graphene oxide/In₂O₃ (Cu₂O/RGO/In₂O₃) hybrid with abundant oxygen vacancies was prepared by a facile, surfactant-free method. The hybrid photocatalyst exhibits an increased photocatalytic activity in water oxidation and degradation of environmental pollutants (methylene blue and Cr⁶⁺ solutions) compared with pure In₂O₃ and Cu₂O materials. The presence of oxygen vacancies in Cu₂O/RGO/In₂O₃ and the formation of heterojunction between In₂O₃ and Cu₂O induce extra diffusive electronic states above the valence band (VB) edge and reduce the band gap of the hybrid consequently. Besides, the increased activity of Cu₂O/RGO/In₂O₃ hybrid is also attributed to the alignment of band edge, a process that is assisted by different Fermi levels between In₂O₃ and Cu₂O, as well as the charge transfer and distribution onto the graphene sheets, which causes the downshift of VB of In₂O₃ and the significant increase in its oxidation potential. Additionally, a built-in electric field is generated on the interface of n-type In₂O₃ and p-type Cu₂O, suppressing the recombination of photoinduced electron-hole pairs and allowing the photogenerated electrons and holes to participate in the reduction and oxidation reactions for oxidizing water molecules and pollutants more efficiently.

Titania supported MOF-199 derived Cu–Cu2O nanoparticles: highly efficient non-noble metal photocatalysts for hydrogen production from alcohol–water mixtures

Water splitting over Cu–Cu₂O/TiO₂ photocatalysts.

Embedding Metal in the Interface of a p-n Heterojunction with a Stack Design for Superior Z-Scheme Photocatalytic Hydrogen Evolution

The construction of a p-n heterojunction is an efficient strategy to resolve the limited light absorption and serious charge-carrier recombination in semiconductors and enhance the photocatalytic activity. However, the promotion effect is greatly limited by poor interfacial charge transfer efficiency as well as reduced redox ability of charge carriers. In this work, we demonstrate that the embedding of metal Pd into the interface between n-type C3N4 and p-type Cu2O can further enhance the interfacial charge transfer and increase the redox ability of charge carriers through the design of the C3N4-Pd-Cu2O stack nanostructure. The embedded Pd nanocubes in the stack structure not only trap the charge carriers from the semiconductors in promoting the electron-hole separation but also act as a Z-scheme "bridge" in keeping the strong reduction/oxidation ability of the electrons/holes for surface reactions. Furthermore, Pd nanocubes also increase the bonding strength between the two semiconductors. Enabled by this unique design, the hydrogen evolution achieved is dramatically higher than that of its counterpart C3N4-Cu2O structure without Pd embedding. The apparent quantum efficiency (AQE) is 0.9% at 420 nm for the designed C3N4-Pd-Cu2O. This work highlights the rational interfacial design of heterojunctions for enhanced photocatalytic performance.

Synthesis of Cu2O Octadecahedron/TiO2 Quantum Dot Heterojunctions with High Visible Light Photocatalytic Activity and High Stability

Since p-n heterojunction photocatalysts with higher energy facets exposed usually possess greatly enhanced photocatalytic activities than single-phase catalysts, a novel Cu2O octadecahedron/TiO2 quantum dot (Cu2O-O/TiO2-QD) p-n heterojunctions composite was designed and synthesized in this study. Cu2O octadecahedra (Cu2O-O) with {110} facets and {100} facets exposed were synthesized first, then highly dispersed TiO2 quantum dots (TiO2-QDs) were loaded on Cu2O-O by the precipitation of TiO2-QDs sol in the presence of absolute ethanol. The morphology, crystal structure, chemical composition, optical properties, photocatalytic activity, and stability of Cu2O-O/TiO2-QD heterojunctions were characterized and investigated. It was found that TiO2-QDs were firmly anchored on Cu2O-O single crystals with good dispersibility. The Cu2O-O/TiO2-QD heterojunctions with partial coverage of TiO2-QDs showed a strong absorbance of visible light and exhibited an effective transfer of photoexcited electrons. The degradation of methyl orange (MO) under visible light irradiation indicated that the photocatalytic activity of Cu2O-O/TiO2-QD heterojunctions was significantly enhanced compared with that of Cu2O-O. This Cu2O-O/TiO2-QD heterojunctions composite exhibited high stability in MO degradation process and after storage in air. The high visible light photocatalytic activity and good stability were attributed to high utilization of light, effective separation of photoexcited electron-hole pairs, and instant scavenging of holes in the unique heterojunction structure.

Photoelectrochemical performance of g-C3N4/Au/BiPO4Z-scheme composites to improve the mineralization property under solar light

g-C₃N₄/Au/BiPO₄as a hierarchical Z-scheme system was prepared through three steps at different reaction temperatures, using thiourea as a precursor to synthesize g-C₃N₄.

Mesoporous assembled structures of Cu2O and TiO2nanoparticles for highly efficient photocatalytic hydrogen generation from water

Mesoporous assemblies of Cu₂O/TiO₂nanoparticle heterojunctions, which have a large internal surface area and narrow-sized pores, show highly efficient and robust photocatalytic hydrogen evolution from water using UV-visible light.

Morphologically controllable synthesis of core–shell structured Au@Cu2O with enhanced photocatalytic activity

Core–shell structured Au@Cu₂O nanocomposites with different morphologies were prepared by a facile solution route.

Growth of Cu particles on a Cu2O truncated octahedron: tuning of the Cu content for efficient glucose sensing

A simple and versatile hydrothermal method is developed to synthesize Cu–Cu₂O, in which Cu particles grow on the surface of a Cu₂O truncated octahedron.