An industrial perspective of the impact of Haldor Topsøe on (in situ) electron microscopy in catalysis

Evaluation of photodegradation performance by paper microzones

Currently, the performance evaluation of catalysts usually requires expensive instruments. Hence, it is imperative to develop an alternative, green and sustainable method to investigate the photocatalytic reaction processes. Herein, the variation of degradation performance of different wastewaters with different dosage of P25 TiO₂ was evaluated to verify the reliability of the paper microzones method (PMZs). The optimum P25 TiO₂ dosage of 1 g/L for the degradation of methylene blue (MB) (UV light for 6 mins) and 0.5 g/L for the degradation of fuchsin basic (FB) (UV light for 5 mins) was obtained by the PMZs method. For the photocatalytic degradation of trivalent iron ion complexed salicylic acid (Fe(III)-SA) solution, the R² values of 0.904 and 0.801 were obtained for the photocatalytic reaction kinetics by PMZs and spectrophotometry, respectively, which again indicated the high reliability of PMZs. The accuracy of the results obtained by PMZs method relative to the spectrophotometric method ranged from 68.80% to 87.54% when degrading MB, FB, mixture of MB and FB, and Fe(III)-SA by P25 TiO₂. Therefore, the PMZs method is all in line with the requirements of low-carbon environmental protection and green chemistry, and has broad application prospects in the future.

From platinum atoms in molecules to colloidal nanoparticles: A review on reduction, nucleation and growth mechanisms

Platinum (Pt) is one of the most studied materials in catalysis today and considered for a wide range of applications: chemical synthesis, energy conversion, air treatment, water purification, sensing, medicine etc. As a limited and non-renewable resource, optimized used of Pt is key. Nanomaterial design offers multiple opportunities to make the most of Pt resources down to the atomic scale. In particular, colloidal syntheses of Pt nanoparticles are well documented and simple to implement, which accounts for the large interest in research and development. For further breakthroughs in the design of Pt nanomaterials, a deeper understanding of the intricate synthesis-structures-properties relations of Pt nanoparticles must be obtained. Understanding how Pt nanoparticles form from molecular precursors is both a challenging and rewarding area of investigation. It is directly relevant to develop improved Pt nanomaterials but is also a source of inspiration to design other precious metal nanostructures. Here, we review the current understanding of Pt nanoparticle formation. This review is aimed at readers with interest in Pt nanoparticles in general and their colloidal syntheses in particular. Readers with a strongest interest on the study of nanomaterial formation will find here the case study of Pt. The preferred model systems and characterization techniques used to perform the study of Pt nanoparticle syntheses are discussed. In light of recent achievements, further direction and areas of research are proposed.

The catalytic effects of sulfur in ethane dehydroaromatization

In this work, we investigated the catalytic effect of adding sulfur on Zn/ZSM-5 catalyst for direct conversion of ethane to aromatics. We show that the continuous addition of hydrogen sulfide (H2S) effectively stabilizes zinc, prevents coking and results in a highly selective and stable catalyst. Considering the high content of sulfur in shale gas resources, these results highlight the importance of investigating catalysts under realistic operating conditions.

Topotactic Growth of Edge-Terminated MoS2 from MoO2 Nanocrystals

Layered transition metal dichalcogenides have distinct physicochemical properties at their edge-terminations. The production of an abundant density of edge structures is, however, impeded by the excess surface energy of edges compared to basal planes and would benefit from insight into the atomic growth mechanisms. Here, we show that edge-terminated MoS₂ nanostructures can form during sulfidation of MoO₂ nanocrystals by using in situ transmission electron microscopy (TEM). Time-resolved TEM image series reveal that the MoO₂ surface can sulfide by inward progression of MoO₂(202̅):MoS₂(002) interfaces, resulting in upright-oriented and edge-exposing MoS₂ sheets. This topotactic growth is rationalized in the interplay with density functional theory calculations by successive O-S exchange and Mo sublattice restructuring steps. The analysis shows that formation of edge-terminated MoS₂ is energetically favorable at MoO₂(110) surfaces and provides a necessary requirement for the propensity of a specific MoO₂ surface termination to form edge-terminated MoS₂. Thus, the present findings should benefit the rational development of transition metal dichalcogenide nanomaterials with abundant edge terminations.

Step edge structures on the anatase TiO2 (001) surface studied by atomic-resolution TEM and STM

Atomic arrangements in oxide surfaces can be uncovered by combining side view imaging using transmission electron microscopy and top view imaging using scanning tunnelling microscopy.

Visualizing atomic-scale redox dynamics in vanadium oxide-based catalysts

Surface redox processes involving oxygen atom exchange are fundamental in catalytic reactions mediated by metal oxides. These processes are often difficult to uncover due to changes in the surface stoichiometry and atomic arrangement. Here we employ high-resolution transmission electron microscopy to study vanadium oxide supported on titanium dioxide, which is of relevance as a catalyst in, e.g., nitrogen oxide emission abatement for environmental protection. The observations reveal a reversible transformation of the vanadium oxide surface between an ordered and disordered state, concomitant with a reversible change in the vanadium oxidation state, when alternating between oxidizing and reducing conditions. The transformation depends on the anatase titanium dioxide surface termination and the vanadium oxide layer thickness, suggesting that the properties of vanadium oxide are sensitive to the supporting oxide. These atomic-resolution observations offer a basis for rationalizing previous reports on shape-sensitive catalytic properties.

Redox processes in metal oxide surfaces can exhibit structure sensitivities which are difficult to uncover. Here, the authors use atomic-resolution imaging to demonstrate facet dependent alterations in the surfaces of supported vanadium oxide upon reduction and oxidation.

Future Challenges in Heterogeneous Catalysis: Understanding Catalysts under Dynamic Reaction Conditions

In the future, (electro-)chemical catalysts will have to be more tolerant towards a varying supply of energy and raw materials. This is mainly due to the fluctuating nature of renewable energies. For example, power-to-chemical processes require a shift from steady-state operation towards operation under dynamic reaction conditions. This brings along a number of demands for the design of both catalysts and reactors, because it is well-known that the structure of catalysts is very dynamic. However, in-depth studies of catalysts and catalytic reactors under such transient conditions have only started recently. This requires studies and advances in the fields of 1) operando spectroscopy including time-resolved methods, 2) theory with predictive quality, 3) kinetic modelling, 4) design of catalysts by appropriate preparation concepts, and 5) novel/modular reactor designs. An intensive exchange between these scientific disciplines will enable a substantial gain of fundamental knowledge which is urgently required. This concept article highlights recent developments, challenges, and future directions for understanding catalysts under dynamic reaction conditions.

Assessing and ameliorating the influence of the electron beam on carbon nanotube oxidation in environmental transmission electron microscopy

In this work, we examine how the imaging electron beam can induce damage in carbon nanotubes (CNTs) at varying oxygen gas pressures and electron dose rates using environmental transmission electron microscopy (ETEM). Our studies show that there is a threshold cumulative electron dose which brings about damage in CNTs in oxygen - through removal of their graphitic walls - which is dependent on O₂ pressure, with a 4-5 fold decrease in total electron dose per decade increase at a lower pressure range (10^-6 to 10^-5mbar) and approximately 1.3 -fold decrease per decade increase at a higher pressure range (10^-3 to 10⁰mbar). However, at a given pressure, damage in CNTs was found to occur even at the lowest dose rate utilized, suggesting the absence of a lower limit for the latter parameter. This study provides guidelines on the cumulative dose required to damage nanotubes in the 10^-7mbar to 10⁰mbar pressure regimes, and discusses the role of electron dose rate and total electron dose on beam-induced CNT degradation experiments.

On the role of the gas environment, electron-dose-rate, and sample on the image resolution in transmission electron microscopy

The introduction of gaseous atmospheres in transmission electron microscopy offers the possibility of studying materials in situ under chemically relevant environments. The presence of a gas environment can degrade the resolution. Surprisingly, this phenomenon has been shown to depend on the electron-dose-rate. In this article, we demonstrate that both the total and areal electron-dose-rates work as descriptors for the dose-rate-dependent resolution and are related through the illumination area. Furthermore, the resolution degradation was observed to occur gradually over time after initializing the illumination of the sample and gas by the electron beam. The resolution was also observed to be sensitive to the electrical conductivity of the sample. These observations can be explained by a charge buildup over the electron-illuminated sample area, caused by the beam–gas–sample interaction, and by a subsequent sample motion induced by electrical capacitance in the sample.