Rational nanoparticle synthesis to determine the effects of size, support, and K dopant on Ru activity for levulinic acid hydrogenation to γ-valerolactone

Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran on Alkali Doped Ru/C Catalysts. Electron Properties of Ruthenium Species as Descriptor of Catalytic Activity

Selective aerobic oxidation of 5-hydroxymethylfurfural into 2,5-diformylfuran has been achieved on alkali doped Ru/C catalyst. Optimization of Ru metal nanoparticles, as well as the nature and amount of the alkali dopant have been performed. The results showed that doping the Ru/C catalyst with controlled amount of potassium increases the catalytic activity, 2.5 fold with respect to the non-doped sample. Spectroscopic studies showed that these differences in activity can be attributed to a different oxidation reaction mechanism associated to the presence of electron rich Ru species in the promoted sample that facilitate the dissociation of O2, while prevents the oxidation of the metal. The Ru/C-K doped catalyst resulted very stable against leaching and metal sintering, being possible the reuse over several consecutive runs. Moreover, the catalyst could be successfully applied to the oxidation of different alcohols.

A Comparative Study of Electrochemical Reduction of Levulinic Acid on Various Electrodes in Organic Solvents

Studies on the electrochemical hydrogenation (ECH) of levulinic acid (LA) to valeric acid (VA) or γ-valerolactone (GVL) have mainly focused on the electrochemical reduction of LA in acidic aqueous solutions. However, the narrow range of applied potentials has hindered understanding of some mechanistic aspects of LA electrochemical conversion. Earlier, we discovered that employing proton-deficient non-aqueous reaction media provides more comprehensive insights into the mechanism of LA electrochemical reduction. Here, we conducted further investigations into the LA electroreduction process using cyclic voltammetry in various organic solvents on a Pt electrode and on various electrode materials in acetonitrile, both with and without the addition of proton donors. The products of the ECH processes were identified using HPLC. The solvent nature, the presence of proton donors, the electrode material, and the applied potential strongly influence the LA electroreduction process. This study reveals that LA, in the presence proton donors, can undergo electrochemical reduction through different pathways, depending on the difference (ΔE1/2) between the reduction half-wave potential of protons and LA on a certain electrode. When the difference is large, the LA reduction is incomplete and the formation of GVL is observed. Under the close reduction potentials of protons and LA, LA can be completely reduced to VA.

Hydrogenation of Carboxylic Acids, Esters, and Related Compounds over Heterogeneous Catalysts: A Step toward Sustainable and Carbon-Neutral Processes

The catalytic hydrogenation of esters and carboxylic acids represents a fundamental and important class of organic transformations, which is widely applied in energy, environmental, agricultural, and pharmaceutical industries. Due to the low reactivity of the carbonyl group in carboxylic acids and esters, this type of reaction is, however, rather challenging. Hence, specifically active catalysts are required to achieve a satisfactory yield. Nevertheless, in recent years, remarkable progress has been made on the development of catalysts for this type of reaction, especially heterogeneous catalysts, which are generally dominating in industry. Here in this review, we discuss the recent breakthroughs as well as milestone achievements for the hydrogenation of industrially important carboxylic acids and esters utilizing heterogeneous catalysts. In addition, related catalytic hydrogenations that are considered of importance for the development of cleaner energy technologies and a circular chemical industry will be discussed in detail. Special attention is paid to the insights into the structure-activity relationship, which will help the readers to develop rational design strategies for the synthesis of more efficient heterogeneous catalysts.

Modulating the surface structure of nanodiamonds to enhance the electronic metal–support interaction of efficient ruthenium catalysts for levulinic acid hydrogenation

The annealed nanodiamond-supported Ru NPs with high electron density exhibit efficient activity and high stability for hydrogenation of levulinic acid.

Hierarchically porous single catalyst Ru/HPW/UiO-66 with synergistic acid/metal sites for one-pot catalytic synthesis of γ–Valerolactone

γ-valerolactone (GVL) is an important lignocellulosic platform molecule with huge potential for various industrial and chemical applications, which is usually produced by using Levulinic acid (LA) or its esters as...

Ruthenium-Nanoparticle-Loaded Hollow Carbon Spheres as Nanoreactors for Hydrogenation of Levulinic Acid: Explicitly Recognizing the Void-Confinement Effect

As a typical class of man-made nanoreactors, metal-loaded hollow carbon nanostructures (MHC nanoreactors) exhibit competitive potentials in the heterogeneous catalysis due to their tailorable microenvironment effects, in which the void-confinement effect is one of the most fundamental functions in boosting the catalytic performance. Herein this paper, Ru-loaded hollow carbon spheres are employed as nanoreactors with a crucial biomass hydrogenation process, levulinic acid (LA) hydrogenation into γ-valerolactone, as the probe reaction to further recognize the forming mechanism of this pivotal effect. We demonstrated that the void-confinement effect of the selected MHC nanoreactors is essentially driven by an integrating action of electronic metal-support interaction, reactant enrichment and diffusion, which are mainly ascribed to peculiar properties of hollow nanoreactors both in electronic and structural aspects, respectively. This work offers a distinct case for interpreting the catalytic behaviour of MHC nanoreactors, which could potentially promise broader insights into the microenvironment engineering strategies of hollow nanostructures.

Lignin Compounds to Monoaromatics: Selective Cleavage of C-O Bonds over a Brominated Ruthenium Catalyst

The cleavage of C-O linkages in aryl ethers in biomass-derived lignin compounds without hydrogenation of the aromatic rings is a major challenge for the production of sustainable mono-aromatics. Conventional strategies over the heterogeneous metal catalysts require the addition of homogeneous base additives causing environmental problems. Herein, we propose a heterogeneous Ru/C catalyst modified by Br atoms for the selective direct cleavage of C-O bonds in diphenyl ether without hydrogenation of aromatic rings reaching the yield of benzene and phenol as high as 90.3 % and increased selectivity to mono-aromatics (97.3 vs. 46.2 % for initial Ru) during depolymerization of lignin. Characterization of the catalyst indicates selective poisoning by Br of terrace sites over Ru nanoparticles, which are active in the hydrogenation of aromatic rings, while the defect sites on the edges and corners remain available and provide higher intrinsic activity in the C-O bond cleavage.

Metal-Catalyzed Hydrogenation of Biomass-Derived Furfural: Particle Size Effects and Regulation Strategies

The hydrogenation of furfural (FUR), a typical bio-based furan derivative, is a critical reaction within the roadmap for upgrading lignocellulosic biomass into high value-added chemicals and liquid fuels, the performance of which is strongly correlated with the catalysts' intrinsic peculiarities. Metal catalysts with tailorable sizes, uniform dispersions and robust sintering resistance are generally recognized as a prerequisite for obtaining better hydrogenation activity, selectivity and stability, which has prompted intensive research into metal particle size effects and their regulation strategies. The roles of metal particle sizes and corresponding dispersions of metal catalysts used for FUR hydrogenation have been clearly recognized to be crucial over the past decade. In this regard, this systematic Minireview aims to provide profound insights into particle size effects in the metal-catalyzed hydrogenation of FUR, as well as conditional and structural approaches to regulating these effects. In addition, from the aspect of catalyst stability, the impacts and improvements of the metal particle sintering issue are analyzed. Moreover, several suggestions are proposed in response to the challenges in regulating particle size effects. Furthermore, the viewpoints presented herein would potentially contribute to the rational development of metal hydrogenation catalysts and further help to boost a more sustainable biomass refining system.

Hydrogenation of Furfural to Furfuryl Alcohol over Ru Particles Supported on Mildly Oxidized Biochar

Catalytic hydrogenation of aldehydes is required as the stabilizing step in bio-oils conversion. Ruthenium supported on carbon was used in the present work for hydrogenation of furfural (FF) to furfuryl alcohol (FA). Converting a biochar with no surface area and low carboxyl groups surface density to an outstanding catalyst support using a very simple mild air/steam oxidation is the original contribution of this work. The mildly oxidized biochar is impregnated with a targeted loading of 2.5 wt.% Ru via ion-exchange, using Ru(NH3)6Cl2 precursor. ICP analysis shows that the mild oxidation increases Ru adsorption capacity of untreated biochar from 1.2 to 2.2 wt.%. H2 chemisorption and TEM analysis indicate that the preliminary mild oxidation leads to higher Ru dispersion. XPS analysis also shows that the treatment prevents Ru from surface segregation. The highest value of 93% FA selectivity at 53% FF conversion was obtained in a batch autoclave reactor under optimized conditions.

Low temperature conversion of levulinic acid into γ-valerolactone using Zn to generate hydrogen from water and nickel catalysts supported on sepiolite

In the present article, γ-valerolactone has been obtained from levulinic acid with a yield exceeding 25% using very mild conditions without feeding hydrogen (30 °C, atmospheric pressure, water as the hydrogen source). The overall reaction conducted is a two-step process: first, a redox reaction involving the oxidation of metallic Zn to ZnO for in situ hydrogen production through the water splitting reaction and, second, a catalytic reaction involving Ni-supported catalysts for the production of γ-valerolactone from levulinic acid. Ni active sites have been supported on sepiolite, an abundant and cheap material. The nickel particle size has been demonstrated to be a parameter of paramount importance determining the catalytic activity, since the best catalytic performance is obtained with the smallest Ni nanoparticles. This combination of Zn and Ni supported on sepiolite shows a good catalytic stability after three catalytic runs.

Material Discovery and High Throughput Exploration of Ru Based Catalysts for Low Temperature Ammonia Decomposition

High throughput experimentation has the capability to generate massive, multidimensional datasets, allowing for the discovery of novel catalytic materials. Here, we show the synthesis and catalytic screening of over 100 unique Ru-Metal-K based bimetallic catalysts for low temperature ammonia decomposition, with a Ru loading between 1-3 wt% Ru and a fixed K loading of 12 wt% K, supported on γ-Al₂O₃. Bimetallic catalysts containing Sc, Sr, Hf, Y, Mg, Zr, Ta, or Ca in addition to Ru were found to have excellent ammonia decomposition activity when compared to state-of-the-art catalysts in literature. Furthermore, the Ru content could be reduced to 1 wt% Ru, a factor of four decrease, with the addition of Sr, Y, Zr, or Hf, where these secondary metals have not been previously explored for ammonia decomposition. The bimetallic interactions between Ru and the secondary metal, specifically RuSrK and RuFeK, were investigated in detail to elucidate the reaction kinetics and surface properties of both high and low performing catalysts. The RuSrK catalyst had a turnover frequency of 1.78 s^-1, while RuFeK had a turnover frequency of only 0.28 s^-1 under identical operating conditions. Based on their apparent activation energies and number of surface sites, the RuSrK had a factor of two lower activation energy than the RuFeK, while also possessing an equivalent number of surface sites, which suggests that the Sr promotes ammonia decomposition in the presence of Ru by modifying the active sites of Ru.

Easy Method for the Transformation of Levulinic Acid into Gamma-Valerolactone Using a Nickel Catalyst Derived from Nanocasted Nickel Oxide

Different nickel catalysts have been tested for the transformation of levulinic acid into γ-valerolactone using an easy hydrothermal method, taking advantage of the properties of the high temperature water. A metallic nickel catalyst derived from NiO synthesized by a nanocasting procedure can achieve a productivity to γ-valerolactone, which is two orders of magnitude higher than that obtained by a commercial nickel catalyst. This nanocasted metallic nickel catalyst has shown bifunctionality as it is capable of activating water as the source for hydrogen and undertaking the further hydrogenation step. In contrast with metallic nickel, nickel oxide has shown to be incapable of transforming levulinic acid into γ-valerolactone.

Rapid Microwave-Assisted Polyol Synthesis of TiO2-Supported Ruthenium Catalysts for Levulinic Acid Hydrogenation

One wt% Ru/TiO2 catalysts prepared by a one-pot microwave-assisted polyol method have been shown to be highly active for Levulinic acid hydrogenation to γ-Valerolactone. Preparation temperature, microwave irradiation time and choice of Ru precursor were found to have a significant effect on catalyst activity. In the case of Ru(acac)3-derived catalysts, increasing temperature and longer irradiation times increased catalyst activity to a maximum LA conversion of 69%. Conversely, for catalysts prepared using RuCl3, shorter preparation times and lower temperatures yielded more active catalysts, with a maximum LA conversion of 67%. Catalysts prepared using either precursor were found to contain highly dispersed nanoparticles <3 nm in diameter. XPS analysis of the most and least active catalysts shows that the catalyst surface is covered in a layer of insoluble carbon with surface concentrations exceeding 40% in some cases. This can be attributed to the formation of large condensation oligomers from the reaction between the solvent, ethylene glycol and its oxidation products, as evidenced by the presence of C-O and C = O functionality on the catalyst surface.

Enhanced Production of γ-Valerolactone with an Internal Source of Hydrogen on Ca-Modified TiO2 Supported Ru Catalysts

Calcium-modified titania supported Ru catalysts were synthesized and evaluated for the hydrogenation of levulinic acid with formic acid as an internal hydrogen source and water as a green solvent. A new elegant photoassisted method was developed for the synthesis of uniform-size and evenly distributed Ru particles on the titania surface. Compared with the counterpart catalysts prepared by classical wet impregnation, enhanced levulinic acid conversion and γ-valerolactone yield were obtained and further improved through modification of the support by introduction of calcium into the titania support. This synthesis approach resulted in a change of the surface and bulk properties of the support, namely a decrease in the anatase crystallite size and the formation of a new calcium titanate phase. As a consequence, the properties of the catalysts were modified, and smaller ruthenium particles that had stronger interactions with the support were obtained. This affected the strength of the CO adsorption on the catalyst surface and facilitated the reaction performance. The optimum size of Ru particles that allowed for most efficient levulinic acid conversion was established.

Supercritical diethylamine facilitated loading of ultrafine Ru particles on few-layer graphene for solvent-free hydrogenation of levulinic acid to γ-valerolactone

We demonstrate a facile and versatile method to grow Ru particles uniformly on pristine few-layer graphene (FLG) in supercritical diethylamine. In particular, a large number of Ru subnanometer clusters less than 1.0 nm were observed. The particle size can be tuned by manipulating the loading content of Ru and controlling the reaction temperature. The resulting Ru/FLG showed remarkably high activity, selectivity, and reusability towards the hydrogenation of levulinic acid to γ-valerolactone. This method is flexible, and can be extended to the synthesis of a variety of other ultrafine metal particles supported on FLG.

Catalytic conversion of biomass-derived levulinic acid into alcohols over nanoporous Ru catalyst

1,4-pentanediol or monohydric alcohol were achieved with high selectivity from levulinic acid under relatively mild conditions using nanoporous Ru.

Palladium–gold single atom alloy catalysts for liquid phase selective hydrogenation of 1-hexyne

Silica supported and unsupported PdAu single atom alloys (SAAs) were investigated for the selective hydrogenation of 1-hexyne to hexenes under mild conditions.