CeO2-catalyzed direct synthesis of dialkylureas from CO2 and amines

Comparative Study between 2-Furonitrile and 2-Cyanopyridine as Dehydrants in Direct Synthesis of Dialkyl Carbonates from CO2 and Alcohols over Cerium Oxide Catalyst

The shift of equilibrium by removing water with nitrile dehydrants is crucial for CeO2 -catalyzed synthesis of dialkyl carbonates from CO2 and alcohols. Two nitriles - 2-cyanopyridine and 2-furonitrile - were previously found as effective dehydrants, yet their detailed comparison as well as exploration of potential of 2-furonitrile remain insufficient. Herein, the performance of 2-cyanopyridine and 2-furonitrile was compared in the synthesis of various dialkyl carbonates. 2-furonitrile was found to be superior to 2-cyanopyridine in the synthesis of dialkyl carbonates from CO2 and bulky or long-chain (≥C3) alcohols. Namely, the yield of diisopropyl carbonate (up to 50 %) achieved using CeO2 and 2-furonitrile is comparable to or even higher than previously reported ones. Meanwhile, 2-cyanopyridine acted as a better dehydrant than 2-furonitrile in the synthesis of dimethyl carbonate and diethyl carbonate. The adsorption experiments and density functional theory calculations have indicated that the better performance of 2-furonitrile compared to 2-cyanopyridine in the synthesis of dialkyl carbonates from bulky or long-chain alcohols is due to the weaker interaction of 2-furonitrile with the CeO2 surface. Such weak interaction of 2-furonitrile offers a larger reaction field on the catalyst surface for both CO2 and alcohols.

Visible light-promoted synthesis of ureas and formamides from amines and CO2

A divergent visible-light-induced Ph₃P-promoted method for the synthesis of ureas and formamides from amines and CO₂ is reported. Without external additions, a range of ureas could be directly accessed under ambient temperature and pressure. Using triisopropylsilanethiol as the hydrogen source, formamides could be produced.

No competitive inhibition of bicarbonate or carbonate for formate dehydrogenase from Candida boidinii -catalyzed CO2 reduction

Formate dehydrogenase from Candida boidinii (CbFDH) reversibly catalyzes the formate to CO2 with the redox coupling NAD+/NADH. While many studies on CbFDH-catalyzed formate oxidation in the presence of NAD+ are...

CeO2-Catalyzed Synthesis of 2-Imidazolidinone from Ethylenediamine Carbamate

CeO2 acted as an effective and reusable heterogeneous catalyst for the direct synthesis of 2-imidazolidinone from ethylenediamine carbamate (EDA-CA) without further addition of CO2 in the reaction system. 2-Propanol was the best solvent among the solvents tested from the viewpoint of selectivity to 2-imidazolidinone, and the use of an adequate amount of 2-propanol provided high conversion and selectivity for the reaction. This positive effect of 2-propanol on the catalytic reaction can be explained by the solubility of EDA-CA in 2-propanol under the reaction conditions and no formation of solvent-derived byproducts. This catalytic system using the combination of the CeO2 catalyst and the 2-propanol solvent provided 2-imidazolidinone in up to 83% yield on the EDA-CA basis at 413 K under Ar. The reaction conducted under Ar showed a higher reaction rate than that with pressured CO2, which clearly demonstrated the advantage of the catalytic system operated at low CO2 pressure or even without CO2.

One-pot catalytic synthesis of urea derivatives from alkyl ammonium carbamates using low concentrations of CO2

To reduce anthropogenic carbon dioxide (CO₂) emissions, it is desirable to develop reactions that can efficiently convert low concentrations of CO₂, present in exhaust gases and ambient air, into industrially important chemicals, without involving any expensive separation, concentration, compression, and purification processes. Here, we present an efficient method for synthesizing urea derivatives from alkyl ammonium carbamates. The carbamates can be easily obtained from low concentrations of CO₂ as present in ambient air or simulated exhaust gas. Reaction of alkyl ammonium carbamates with 1,3-dimethyl-2-imidazolidinone solvent in the presence of a titanium complex catalyst inside a sealed vessel produces urea derivatives in high yields. This reaction is suitable for synthesizing ethylene urea, an industrially important chemical, as well as various cyclic and acyclic urea derivatives. Using this methodology, we also show the synthesis of urea derivatives directly from low concentration of CO₂ sources in a one-pot manner.

Hydrosilane-Assisted Synthesis of Urea Derivatives from CO2 and Amines

A methodology employing CO₂, amines, and phenylsilane was discussed to access aryl- or alkyl-substituted urea derivatives. This procedure was characterized by adopting hydrosilane to promote the formation of ureas directly, without the need to prepare silylamines in advance. Control reactions suggested that FeCl₃ was a favorable additive for the generation of ureas, and this 1,5,7-triazabicyclo[4.4.0]dec-5-ene-catalyzed reaction might proceed through nucleophilic addition, silicon migration, and the subsequent formal substitution of silylcarbamate.

Zn/Al/Pb Mixed Oxides as Efficient Heterogeneous Catalysts for the Synthesis of Methyl N-Phenyl Carbamate

Dimethyl carbonate aminolysis is an effective and green pathway for the synthesis of methyl N-phenyl carbamate (MPC), which is an important intermediate for the synthesis of polyurethanes and many other chemicals. In this work, we demonstrate the fabrication of Zn/Al/Pb mixed oxides as efficient and stable heterogeneous catalysts for MPC synthesis. The catalysts are prepared via facile coprecipitation and subsequent thermal annealing. Their micromorphology and physical-chemical properties are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning TEM (STEM), X-ray photoelectron spectroscopy (XPS), and NH3-TPD. The results show that rather than being doped into ZnO and/or Al2O3, PbO is highly dispersed in the ZnO/Al2O3 base forming ultrafine nanoparticles. Despite the weak interactions within the mixed oxides, the high density of active sites generates outstanding catalytic activity and cycling stability for MPC synthesis, with an aniline conversion of almost 100% and MPC yield of up to 90% during six repeated tests, providing great potential for their further application.

Lanthanum(III) Trifluoromethanesulfonate Catalyzed Direct Synthesis of Ureas from N-Benzyloxycarbonyl-, N-Allyloxycarbonyl-, and N-2,2,2-Trichloroethoxycarbonyl-Protected Amines

A novel lanthanum triflate mediated conversion of N-benzyl­oxycarbonyl-, N-allyloxycarbonyl-, and N-trichloroethoxycarbonyl-­protected amines into nonsymmetric ureas was discovered. In this study, lanthanum triflate was found to be an effective catalyst for preparing various nonsymmetric ureas from protected amines. A variety of protected aromatic and aliphatic carbamates reacted readily with various amines in the presence of lanthanum triflate to generate the desired ureas in high yields. This result demonstrated that this novel lanthanum triflate catalyzed preparation of ureas from Cbz, Alloc, and Troc carbamates can be employed for the formation of various urea structures.

Theoretical study on CO2 reduction catalyzed by formate dehydrogenase using the cation radical of a bipyridinium salt with an ionic substituent as a co-enzyme

Mechanism for formate dehydrogenase from Candida boidinii catalyzed CO₂ reduction to formate with the cation radical of a 4,4′-bipyridinium salt with an ionic substituent as a co-enzyme was clarified by theoretical studies.

Artificial co-enzyme based on carbamoyl-modified viologen derivative cation radical for formate dehydrogenase in the catalytic CO2 reduction to formate

The interaction between the single-electron reduced carbamoyl-modified-4,4-bipyridinium salt and CbFDH in the CO₂ reduction to formate is elucidated by enzymatic kinetic analysis, the docking simulation and density functional theory calculation.

Trivalent metal ions promote the malic enzyme-catalyzed building of carbon–carbon bonds from CO2and pyruvate

ME is an attractive biocatalyst for building carbon–carbon bonds through carboxylation of pyruvate with CO₂. The carboxylation of pyruvate with CO₂was promoted by adding a trivalent metal ion. In particular, Al³⁺accelerates ME-catalyzed carboxylation of pyruvate with CO₂.

Double Phosphinoboration of CO2 : A Facile Route to Diphospha-Ureas

The reactions of CO2 with a series of phosphinoboranes, including R2 PBpin (R=Ph, tBu; pin=pinacol), R2 PBMes2 (R=Ph, tBu; Mes=2,4,6-Me3 -C6 H2 ), and R2 PBcat (R=Ph, tBu, Mes; cat=catechol) are described. Although R2 PBpin and R2 PBMes2 afford products of the form R2 PCO2 Bpin (R=Ph 1, tBu 4) and R2 PCO2 BMes2 (R=Ph 2, tBu 3), respectively, R2 PBcat lead to further reaction affording the diphospha-ureas, (R2 P)2 CO (R=Ph 5, tBu 6, Mes 7), together with O(Bcat)2 . Computational studies provide insight into the mechanism, revealing an intermediate derived from double phosphinoboration of CO2 .

Catalytic Conversion of Carbon Dioxide through C-N Bond Formation

From the viewpoint of green chemistry and sustainable development, it is of great significance to synthesize chemicals from CO₂ as C₁ source through C-N bond formation. During the past several decade years, many studies on C-N bond formation reaction were involved, and many efforts have been made on the theory. Nevertheless, several great challenges such as thermodynamic limitation, low catalytic efficiency and selectivity, and high pressure etc. are still suffered. Herein, recent advances are highlighted on the development of catalytic methods for chemical fixation of CO₂ to various chemicals through C-N bond formation. Meanwhile, the catalytic systems (metal and metal-free catalysis), strategies and catalytic mechanism are summarized and discussed in detail. Besides, this review also covers some novel synthetic strategies to urethanes based on amines and CO₂. Finally, the regulatory strategies on functionalization of CO₂ for N-methylation/N-formylation of amines with phenylsilane and heterogeneous catalysis N-methylation of amines with CO₂ and H₂ are emphasized.

CaI2-Catalyzed direct transformation of N-Alloc-, N-Troc-, and N-Cbz-protected amines to asymmetrical ureas

A practical CaI₂-catalyzed direct synthesis of asymmetrical ureas from N-Alloc-, N-Troc-, and N-Cbz-carbamate compounds has been developed.

Methyl N-phenyl carbamate synthesis over Zn/Al/Ce mixed oxide derived from hydrotalcite-like precursors

Methyl N-phenyl carbamate (MPC) is an important intermediate for the green synthesis of methylene diphenyl diisocyanate (MDI) as well as many other important products. In the present work, Zn/Al/Ce mixed oxides derived from hydrotalcite-like precursors were employed as effective and recoverable heterogeneous catalyst for MPC synthesis via DMC aminolysis. Zn/Al/Ce hydrotalcite-like precursors prepared via coprecipitation method and the resulting catalysts were characterized by means of XRD, BET, SEM and XPS. Strong interactions within the Zn/Al/Ce mixed oxides were observed via the addition of appropriate amount of cerium. The mixed oxides containing 2.5% cerium showed high DMC aminolysis activity giving aniline conversion of 95.8%, MPC selectivity of 81.6% and MPC yield of 78.2%. Moreover, as a heterogeneous catalyst, it also exhibited superiorities of easy recovery and recyclable stability for MPC synthesis.

Zn/Al/Ce mixed oxides derived from hydrotalcite-like precursors were employed as effective and recoverable heterogeneous catalyst for MPC synthesis via DMC aminolysis.

Iron-catalyzed urea synthesis: dehydrogenative coupling of methanol and amines

Substituted ureas have numerous applications but their synthesis typically requires the use of highly toxic starting materials. Herein we describe the first base-metal catalyst for the selective synthesis of symmetric ureas via the dehydrogenative coupling of methanol with primary amines. Using a pincer supported iron catalyst, a range of ureas was generated with isolated yields of up to 80% (corresponding to a catalytic turnover of up to 160) and with H2 as the sole byproduct. Mechanistic studies indicate a stepwise pathway beginning with methanol dehydrogenation to give formaldehyde, which is trapped by amine to afford a formamide. The formamide is then dehydrogenated to produce a transient isocyanate, which reacts with another equivalent of amine to form a urea. These mechanistic insights enabled the development of an iron-catalyzed method for the synthesis of unsymmetric ureas from amides and amines.

Transformation of CO2 into polyureas with 3-amino-1,2,4-triazole potassium as a solid base catalyst

The synthesis of polyureas from CO₂ and diamines with KATriz as the catalyst.

B(C6F5)3: a robust catalyst for the activation of CO2 and dimethylamine borane for the N-formylation reactions

In this work, B(C₆F₅)₃ is utilized as an organocatalyst for the transition-metal-free N-formylation of amines using carbon dioxide (CO₂) as a C1 source and dimethylamine borane (Me₂NH·BH₃) as a green hydrogen transfer source at 80 °C.

Synthesis of dimethyl carbonate from CO2 and methanol over a hydrophobic Ce/SBA-15 catalyst

A series of Ce/SBA-15 catalysts with different degrees of hydrophobicities were prepared via a post-grafting method and used for the direct synthesis of dimethyl carbonate (DMC) from CO₂ and methanol. The Ce/SBA-15-6 catalyst exhibited the highest DMC yield of 0.2%, which was close to the equilibrium value under the reaction conditions of 130 °C, 12 h and 12 MPa. The catalysts were characterized via XRD, BET, FT-IR, solid-state ²⁹Si MAS NMR, CA, TEM, XPS and NH₃/CO₂-TPD; the results indicated that the hydrophobicity of the catalysts facilitated the creation of oxygen vacancies, which could act as Lewis acids to activate methanol. Higher amounts of moderate acid sites led to higher yields of DMC. In addition, the hydrophobicity of the catalysts could also reduce the adsorbed water on their surface and increase the DMC yield while shortening the reaction time.

A series of Ce/SBA-15 catalysts with different degrees of hydrophobicities were prepared via a post-grafting method and used for the direct synthesis of dimethyl carbonate (DMC) from CO₂ and methanol.