Non-noble metal catalysts for hydrogenation: A facile method for preparing Co nanoparticles covered with thin layered carbon

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom-incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest.

Noble-Metal-Free Carbon Encapsulated CoNi Alloy Catalyst for the Hydrogenation of 5-(Hydroxymethyl) Furfural to Tetrahydrofurandiol in Aqueous Media

The selective hydrogenation of 5-(hydroxymethyl)furfural (HMF) into 2,5-bis-(hydroxymethyl)tetrahydrofuran (BHMTHF) in flow reactor using water as a green solvent, has been achieved on a non-noble metal catalyst based on monodispersed CoNi alloy nanoparticles covered by a thin carbon layer. The alloyed catalyst containing CoNi (molar ratio 1 : 1) was prepared in a one-step synthesis following a hydrothermal method. Total conversion of HMF with 91 % selectivity to BHMTHF was achieved. The reaction network has been stablished, in which the carbonyl group of HMF is first reduced to alcohol giving the 2,5-bis-(hydroxymethyl)furan (BHMF) with an apparent activation energy of 25 KJ/mol, and then the double bonds of the furan ring are hydrogenated (apparent Ea=31 KJ/mol). Formation of byproducts, mainly proceed from furan ring opening and ring rearrangement processes of BHMF, promoted by water. BHMTHF resulted a compound highly stable under reaction conditions. The fixed bed flow reactor was maintained operational for 65 h without observing any loss of catalytic activity and selectivity.

Aromatic Ethers Induced Electronic Structure Reconstruction on Encapsulated Nickel Catalysts for High-Performance Catalytic Hydrogenation

Carbon-encapsulated metal (CEM) catalysts effectively address supported metal catalyst instability by protecting the active metal with a shell. However, mass transfer limitations lead to reduced activity for catalytic hydrogenation reaction over most CEM catalysts. Herein, we introduce a dopant strategy aimed at incorporating nickel metal within graphene-like shells (GLS) featuring oxygen-containing functional groups (OFGs). The core of this strategy involves precise control of GLS modification and the demonstrated pivotal influence of aromatic ether linkages (═C-O-C) in GLS for significant enhancement of catalytic performance. The introduction of ═C-O-C into GLS with stability was beneficial to improve the work function of the catalyst and promoted electron transmission from Ni metal core to GLS, further elevating the catalytic activity, based on the Mott-Schottky effect. In addition, the experimental characterization and density functional theory (DFT) calculations showcased that the ═C-O-C reconstructed the electronic state of GLS, imparting it highly specific for the adsorption of hydrogen and para-chloronitrobenzene (p-CNB) to obtain para-chloroaniline (p-CAN) with high selectivity. This work manifested a feasible direction for the precise modulation and design of the OFGs in CEM catalysts to achieve highly efficient catalytic hydrogenation.

Construction of Synergistic Co/CoO Interface to Enhance Hydrogenation Activity of Ethyl Lactate to 1,2-Propanediol

The development of effective and stable non-precious catalysts for hydrogenation of ester to diols remains a challenge. Herein, the catalytic hydrogenation of ethyl lactate (EL) to 1,2-propanediol (1,2-PDO) with supported Co catalysts derived from layered double hydroxides (LDHs) is investigated. Catalytic tests reveal that LDH-derived Co catalysts exhibit the best catalytic performance with 98 % of EL conversion and >99 % of 1,2-PDO selectivity at mild conditions, compared with other Co catalysts (supported on Al2 O3 , and TiO2 ) and LDH-derived Cu catalysts. Due to the strong interaction among Co and Al matrix, the main composition is metallic Co0 and CoO after reduction at 600 °C. Besides, the catalyst shows good recyclability in the liquid phase hydrogenation. The superior catalytic performance can be attributed to the synergistic effect between Co0 and CoO, in which H2 molecule is activated on Co0 and EL is strongly adsorbed on CoO via hydroxyl groups.

Ionothermal synthesis of magnetic N-doped porous carbon to immobilize Pd nanoparticles as an efficient nanocatalyst for the reduction of nitroaromatic compounds

Carbon materials play important roles as catalysts or catalyst supports for reduction reactions owing to their high porosity, large specific surface area, great electron conductivity, and excellent chemical stability. In this paper, a mesoporous N-doped carbon substrate (exhibited as N-C) has been synthesized by ionothermal carbonization of glucose in the presence of histidine. The N-C substrate was modified by Fe3O4 nanoparticles (N-C/Fe3O4), and then Pd nanoparticles were stabilized on the magnetic substrate to synthesize an eco-friendly Pd catalyst with high efficiency, magnetic, reusability, recoverability, and great stability. To characterize the Pd/Fe3O4-N-C nanocatalyst, different microscopic and spectroscopic methods such as FT-IR, XRD, SEM/EDX, and TEM were applied. Moreover, Pd/Fe3O4-N-C showed high catalytic activity in reducing nitroaromatic compounds in water at ambient temperatures when NaBH4 was used as a reducing agent. The provided nanocatalyst's great catalytic durability and power can be attributed to the synergetic interaction among well-dispersed Pd nanoparticles and N-doped carbonaceous support.

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles

Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications.

3D variable Co species carbon foam enhanced reactive oxygen species generation and ensured long-term stability for water purification

Cobalt (Co) and oxides are the most common catalysts for activating peroxymonosulfate (PMS). However, practical applications of Co-based PMS-advanced oxidation processes are difficult to realize the degradation of the targeted pollutants due to poor yield of reactive oxygen species (ROS) and inaccessible active sites. Here, we designed 3D oxygen vacancy-rich (V_o-rich) variable Co species@carbon foam (Co_xO_y@CF) via coupling solvent-free and pyrolysis strategies for degrading tetracycline by PMS activation. The kinetic rate of optimized (Co@CoO) Co_xO_y@CF-1.0 (1.0 presented the molar ratio of Co²⁺ and 2-methylimidazole) enhanced by an order of magnitude compared to that of ZIFs derivatives (ZIFs-500) (0.073 vs 0.155 min^-1) due to the special structure. The flow-through unit maintained over 90% removal within 12 h, which was far better than that of ZIFs-500/PMS system. We used electrochemical analysis, quenching experiment, in-situ FTIR and Raman spectra to further investigate the possible mechanism of the 3D Co_xO_y@CF-1.0/PMS system. 3D Co_xO_y@CF-1.0 stimulated the production of the metastable catalyst-PMS* complex obtained O₂^- as intermediates accompanied by the redox cycling of Co²⁺/Co³⁺, which created the dominant ROS (more ¹O₂) in the presence of V_o, which was completely different for ZIFs-500/PMS with coordinated and dominant radical and non-radical pathways. This study could large-scale generate variable cobalt-based catalysts for enhanced ROS generation, leading the new insight for boosting practical applications.

Ni/Co/Co3O4@C nanorods derived from a MOF@MOF hybrid for efficient overall water splitting

The design of nanostructured materials for efficient bifunctional electrocatalysts has gained tremendous attention, yet developing a fast and effective synthesis strategy remains a challenge. Here, we present a fast and scalable synthetic method of Ni/Co/Co₃O₄@C nanorods for efficient overall water splitting. Using microwave synthesis, we first produced a unique Ni-MOF@Co-MOF in a few minutes. Subsequently, we transformed the MOF@MOF into hybrid Ni/Co/Co₃O₄ nanoparticles covered with graphitic carbon in a few seconds using laser-scribing. The prepared bimetallic catalysts showed remarkably low overpotentials of 246 mV for the oxygen evolution reaction (OER) and 143 mV for the hydrogen evolution reaction (HER) at a current density of 30 mA cm^-2. An electrolyzer assembled with the bimetallic catalysts delivered a high current density of 20 mA cm^-2 at a voltage of 1.6 V and exhibited good durability (nearly 91.6% retention even after a long-running operation of 24 h at a voltage of 1.52 V). Our proposed method could serve as a powerful method for creating various multimetallic hybrid nanocatalysts with unique hierarchical structures from diverse MOFs.

Selective Conversion of HMF into 3-Hydroxymethylcyclopentylamine through a One-Pot Cascade Process in Aqueous Phase over Bimetallic NiCo Nanoparticles as Catalyst

5-hydroxymethylfurfural (HMF) has been successfully valorized into 3-hydroxymethylcyclopentylamine through a one-pot cascade process in aqueous phase by coupling the hydrogenative ring-rearrangement of HMF into 3-hydroxymethylcyclopentanone (HCPN) with a subsequent reductive amination with ammonia. Mono- (Ni@C, Co@C) and bimetallic (NiCo@C) nanoparticles with different Ni/Co ratios partially covered by a thin carbon layer were prepared and characterized. Results showed that a NiCo catalyst, (molar ratio Ni/Co=1, Ni_0.5 Co_0.5 @C), displayed excellent performance in the hydrogenative ring-rearrangement of HMF into HCPN (>90 % yield). The high selectivity of the catalyst was attributed to the formation of NiCo alloy structures as hydrogenating sites that limited competitive reactions such as the hydrogenation of furan ring and the over-reduction of the formed HPCN. The subsequent reductive amination of HPCN with aqueous ammonia was performed giving the target cyclopentylaminoalcohol in 97 % yield. Moreover, the catalyst exhibited high stability maintaining its activity and selectivity for repeated reaction cycles.

Magnetically Induced Catalytic Reduction of Biomass-Derived Oxygenated Compounds in Water

The development of energetically efficient processes for the aqueous reduction of biomass-derived compounds into chemicals is key for the optimal transformation of biomass. Herein we report an early example of the reduction of biomass-derived oxygenated compounds in water by magnetically induced catalysis. Non-coated and carbon-coated core-shell FeCo@Ni magnetic nanoparticles were used as the heating agent and the catalyst simultaneously. In this way it was possible to control the product distribution by adjusting the field amplitude applied during the magnetic catalysis, opening a precedent for this type of catalysis. Finally, the encapsulation of the magnetic nanoparticles in carbon (FeCo@Ni@C) strongly improved the stability of the magnetic catalyst in solution, making its reuse possible up to at least eight times in dioxane and four times in water.

Detailed formation process of Co@C catalysts and the influence of structural regulation on catalytic properties

Co@C is a novel class of catalysts with many structural advantages, such as highly dispersed active species, developed pore structure, and special encapsulated structure. Although considerable progress has been made in the development of new Co@C materials, research on the formation mechanism of these materials is lacking. Herein, the overall microcosmic structure of the Co@C catalyst was investigated by systematic characterization. Subsequently, a pseudo in situ method was employed to explore the detailed structure of the Co@C catalyst pyrolyzed at different temperatures. The special carbon environment of materials is essential for synthesizing materials during pyrolysis at high temperatures. Co ions were reduced to Co⁰ by the surrounding carbon atoms at a high temperature. In return, the surrounding carbon atoms were catalyzed by Co⁰ particles to form carbon nanotubes. However, with the obstruction of amorphous carbon atoms that are not in contact with Co⁰, the paths through which the carbon nanotubes move forward formed the porous structure of the catalyst, as well as the graphitic encapsulated structure. Further, the effects of pretreatment conditions on the structure and properties of the Co@C catalyst were studied systematically.

In Situ Construction of a Co/ZnO@C Heterojunction Catalyst for Efficient Hydrogenation of Biomass Derivative under Mild Conditions

The efficient hydrogenation of biomass-derived levulinic acid (LA) to value-added γ-valerolactone (GVL) based on nonprecious metal catalysts under mild conditions is crucial challenge because of the intrinsic inactivity and instability of these catalysts. Herein, a series of highly active and stable carbon-encapsulated Co/ZnO@C-X (where X = 0.1, 0.3, 0.5, the molar ratios of Zn/(Co+Zn)) heterojunction catalysts were obtained by in situ pyrolysis of bimetal CoZn MOF-74. The optimal Co/ZnO@C-0.3 catalyst could achieve 100% conversion of LA and 98.35% selectivity to GVL under mild conditions (100 °C, 5 bar, 3 h), which outperformed most of the state-of-the-art catalysts reported so far. Detailed characterizations, experimental investigations, and theoretical calculations revealed that the interfacial interaction between Co and ZnO nanoparticles (NPs) could promote the dispersibility and air stability of the active Co⁰ for the activation of H₂. Moreover, the strong Co-ZnO interaction also enhanced the Lewis acidity of the Co/ZnO interface, contributing to the adsorption of LA and the esterification of intermediates. The synergy between the hydrogenation sites and the Lewis acid sites at the Co/ZnO interface enabled the conversion of LA to GVL with high efficiency. In addition, benefiting from the Co-ZnO interfacial interaction as well as the unique carbon-encapsulated structure of the heterojunction catalyst, the recyclability was also greatly improved and the yield of GVL was nearly unchanged even after six cycles.

Overoxidation of Intrinsically Conducting Polymers

Intrinsically conducting polymers may undergo significant changes of molecular structure and material properties when exposed to highly oxidizing conditions or very positive electrode potentials, commonly called overoxidation. The type and extent of the changes depend on the experimental conditions and chemical environment. They may proceed already at much lower rates at lower electrode potentials because some of the processes associated with overoxidation are closely related to more or less reversible redox processes employed in electrochemical energy conversion and electrochromism. These changes may be welcome for some applications of these polymers in sensors, extraction, and surface functionalization, but in many cases, the change of properties affects the performance of the material negatively, contributing to material and device degradation. This report presents published examples, experimental observations, and their interpretations in terms of both structural and of material property changes. Options to limit and suppress overoxidation are presented, and useful applications are described extensively.

Experimental and theoretical investigation of the tuning of electronic structure in SnO2via Co doping for enhanced styrene epoxidation catalysis

Co doping is an effective strategy for the tuning of electronic structure in SnO2, which leads to a huge boost in the styrene epoxidation reaction performance.

Catalyst overcoating engineering towards high-performance electrocatalysis

Clean and sustainable energy needs the development of advanced heterogeneous catalysts as they are of vital importance for electrochemical transformation reactions in renewable energy conversion and storage devices. Advances in nanoscience and material chemistry have afforded great opportunities for the design and optimization of nanostructured electrocatalysts with high efficiency and practical durability. In this review article, we specifically emphasize the synthetic methodologies for the versatile surface overcoating engineering reported to date for optimal electrocatalysts. We discuss the recent progress in the development of surface overcoating-derived electrocatalysts potentially applied in polymer electrolyte fuel cells and water electrolyzers by correlating catalyst intrinsic structures with electrocatalytic properties. Finally, we present the opportunities and perspectives of surface overcoating engineering for the design of advanced (electro)catalysts and their deep exploitation in a broad scope of applications.

Single non-noble metal atom doped C2N catalysts for chemoselective hydrogenation of 3-nitrostyrene

Improving the reaction selectivity and activity for challenging substrates such as nitroaromatics bearing two reducible functional groups is important in industry, yet remains a great challenge using traditional metal nanoparticle based catalysts. In this study, single metal atom doped M-C₂N catalysts were theoretically screened for selective hydrogenation of 3-nitrostyrene to 3-vinylaniline with H₂ as the H-source. Among 20 M-C₂N catalysts, the non-noble Mn-C₂N catalyst was found to have excellent reaction selectivity. Importantly, due to the solid frustrated Lewis pair sites in the pores of Mn-C₂N, a low H₂ activation energy is achieved on high-spin Mn-C₂N and the rate-determining step for the hydrogenation reactions is the H diffusion from the metal site to the N site. The unraveled mechanism of the hydrogenation of 3-nitrostyrene using Mn-C₂N enriches the applications of Mn based catalysts and demonstrates its excellent properties for catalyzing the challenging hydrogenation reaction of substrates with two reducible functional groups.

Facile fabrication of graphene encapsulating 3d transition metal nanoparticles as highly active and anti-poisoning catalysts for selective hydrogenation of nitroaromatics

Graphene encapsulating 3d transition metal nanoparticles (Ni, Co, Fe@G) are successfully fabricated through pyrolysis of complexes which are simply prepared via "acid-base reactions" between metal hydroxides and carboxylic acid such as citric acid. In particular, the Ni@G catalyst exhibits outstanding catalytic activity and selectivity (>99%) toward the reduction of various nitroaromatics under mild conditions (1 MPa H₂, 60 °C), even in the presence of poisons (CO and thiophene etc.). This "acid-base reactions" based method provides a facile and scalable approach to prepare graphene encapsulating 3d transition metals with wide ranges of applications.

Highly Dispersed CoNi Alloy Embedded in N-doped Graphitic Carbon for Catalytic Transfer Hydrogenation of Biomass-derived Furfural

The development of efficient, stable, and cost-effective heterogeneous catalysts for catalytic transfer hydrogenation (CTH) of biomass-derived furfural (FAL) is highly desired. Herein, series of N-doped graphitic carbon embedded CoNi bimetallic alloy nanoparticles were fabricated and used for the CTH of FAL to value-added furfuryl alcohol (FOL) with renewable isopropanol as hydrogen donor. Intrinsic catalytic activity examination indicated the catalytic performance of Ni_x Co_y @NGC (x:y=1 : 3, 1 : 1, 3 : 1) nanocatalysts were sensitive to their chemical compositions. The optimal Ni₁ Co₁ @NGC nanocatalyst with Ni/Co mole ratio of 1 : 1 afforded a largest FOL yield of 89.3% with nearly full conversion of FAL. The synergistic effect enabled by bimetallic alloys and the abundant N-based Lewis base sites and surface Co-N active species were revealed based on systematic structural characterization, responsible for the excellent catalytic efficiency of bimetallic Ni₁ Co₁ @NGC nanocatalyst for CTH of FAL.

Combined Spectroscopic and Computational Study of Nitrobenzene Activation on Non-Noble Metals-Based Mono- and Bimetallic Catalysts

In this paper, substituted anilines are industrially obtained by direct hydrogenation of nitroaromatic compounds with molecular H₂ using metals as catalysts. Previous theoretical studies proposed that the mechanism of the reaction depends on the nature of the metal used as a catalyst, and that rationally designed bimetallic materials might show improved catalytic performance. Herein, we present IR spectroscopic studies of nitrobenzene interactions with monometallic Ni/SiO₂, Cu/SiO₂ and Pd/SiO_2, and with bimetallic CuNi/SiO₂ and CuPd/SiO₂ catalysts, both in the absence and presence of H₂, combined with density functional theory (DFT) calculations on selected bimetallic NiCu(111) and PdCu(111) models. The results obtained experimentally confirm that the reaction mechanism on non-noble metals such as Ni proceeds through N-O bond dissociation, generating nitrosobenzene intermediates, while, on noble metals, such as Pd, H-attack is necessary to activate the NO bond. Moreover, a bimetallic CuPd/SiO₂ catalyst with a Pd enriched surface is prepared that exhibits an enhanced H₂ dissociation ability and a particular reactivity at the boundary between the two metals.

Phosphorus-modified biochar cross-linked Mg-Al layered double-hydroxide composite for immobilizing uranium in mining contaminated soil

The decommissioning of uranium mill tailings (UMTs) is usually accompanied by uranium (U) contamination in soil, which poses a serious threat to human health and ecological safety. In this study, a novel phosphorus-modified bamboo biochar (PBC) cross-linked Mg-Al layered double-hydroxide (LDH) composite ("PBC@LDH") was successfully prepared by phosphate pre-impregnation and a hydrothermal method with Mg-Al LDH. Physicochemical analysis revealed that phosphorus-containing functional groups and Mg-Al LDH were grafted onto the pristine biochar (BC) matrix. Laboratory-scale incubation and column leaching experiments were performed on the prepared BC, PBC, and PBC@LDH. The results showed that, at a dosage of 10%, the PBC@LDH composite had a commendable ability to immobilize U in soil. After 40 days of incubation with the stabilizer, the more mobile U was converted into immobilized species. Furthermore, during a column leaching experiment with simulated acid rain, the cumulative loss and leaching efficiency of U were remarkably reduced by PBC@LDH treatment compared with the control, reaching 53% and 54%, respectively. Surface complexation, co-precipitation, and reduction described the adsorption and immobilization mechanisms. In conclusion, this research demonstrates that the PBC@LDH composite offers a potentially effective amendment for the remediation of U contaminated soil.

Tuning the Catalytic Performance of Cobalt Nanoparticles by Tungsten Doping for Efficient and Selective Hydrogenation of Quinolines under Mild Conditions

Non-noble bimetallic CoW nanoparticles (NPs) partially embedded in a carbon matrix (CoW@C) have been prepared by a facile hydrothermal carbon-coating methodology followed by pyrolysis under an inert atmosphere. The bimetallic NPs, constituted by a multishell core-shell structure with a metallic Co core, a W-enriched shell involving Co7W6 alloyed structures, and small WO3 patches partially covering the surface of these NPs, have been established as excellent catalysts for the selective hydrogenation of quinolines to their corresponding 1,2,3,4-tetrahydroquinolines under mild conditions of pressure and temperature. It has been found that this bimetallic catalyst displays superior catalytic performance toward the formation of the target products than the monometallic Co@C, which can be attributed to the presence of the CoW alloyed structures.

In situ creation of multi-metallic species inside porous silicate materials with tunable catalytic properties

Porous metal silicate (PMS) material PMS-11, consisting of uniformly distributed multi-metallic species inside the pores, is synthesized by using a discrete multi-metal coordination complex as the template, demonstrating high catalytic activity and selectivity in hydrogenation of halogenated nitrobenzenes by synergistically activating different reactant molecules via Ni and Co transition metal centers, while GdIII Lewis acid sites play a role in tuning the catalytic properties.

Hydrogenation of substituted nitroaromatics on non-noble metal catalysts: mechanistic insights to improve selectivity

The mechanism of nitrobenzene hydrogenation on non-noble metals such as Ni is different from that previously reported for noble metals like Pt. The newly proposed pathway involves the initial dissociation of the two N-O bonds of nitrobenzene (Ph-NO₂→ Ph-NO → Ph-N), leading to partial oxidation of the catalyst surface, followed by two successive hydrogenation steps (Ph-N → Ph-NH → Ph-NH₂) that finally produce the functionalized aniline. Due to the oxophilic nature of non-noble metals like Ni, Co or Cu, the hydrogenation of the Ph-N intermediate and the removal of O in the form of water become the most energy demanding steps of the process. The strength of the interaction of O, H and N with different metals, and the preferential mode of adsorption of nitroarenes on clean and partially oxidized systems obtained from DFT calculations, are now used to propose an efficient non-noble metal catalyst that optimizes activity and selectivity.

Toward Rational Design of Single-Atom Catalysts

Downscaling catalyst size has long been used to promote the atomic utilization efficiency of catalysts. Single-atom catalysts (SACs) are the current end of this downscaling road, offering the potential of 100% metal atom utilization and excellent catalytic behavior compared with traditional nanoparticle catalysts. However, most development of SACs still relies on trial-and-error experiments because of the insufficient understanding of the distinctive properties of SACs and their structure-activity relationships. This Perspective discusses the path forward toward the rational design of SACs through a summary of understanding regarding the distinctive properties of single-atom active sites, their dynamic changes during the reactions, and the corresponding reaction mechanisms. Major challenges and opportunities for future research on SACs are identified in precisely controlled synthesis, advanced operando characterizations, and discovering the unconventional catalytic mechanisms.

Structural transformations of solid electrocatalysts and photocatalysts

Heterogeneous catalysts often undergo structural transformations when they operate under thermal reaction conditions. These transformations are reflected in their evolving catalytic activity, and a fundamental understanding of the changing nature of active sites is vital for the rational design of solid materials for applications. Beyond thermal catalysis, both photocatalysis and electrocatalysis are topical because they can harness renewable energy to drive uphill reactions that afford commodity chemicals and fuels. Although structural transformations of photocatalysts and electrocatalysts have been observed in operando, the resulting implications for catalytic behaviour are not fully understood. In this Review, we summarize and compare the structural evolution of solid thermal catalysts, electrocatalysts and photocatalysts. We suggest that well-established knowledge of thermal catalysis offers a good basis to understand emerging photocatalysis and electrocatalysis research.

H2 Activation with Co Nanoparticles Encapsulated in N-Doped Carbon Nanotubes for Green Synthesis of Benzimidazoles

Co nanoparticles (NPs) encapsulated in N-doped carbon nanotubes (Co@NC₉₀₀ ) are systematically investigated as a potential alternative to precious Pt-group catalysts for hydrogenative heterocyclization reactions. Co@NC₉₀₀ can efficiently catalyze hydrogenative coupling of 2-nitroaniline to benzaldehyde for synthesis of 2-phenyl-1H-benzo[d]imidazole with >99 % yield at ambient temperature in one step. The robust Co@NC₉₀₀ catalyst can be easily recovered by an external magnetic field after the reaction and readily recycled for at least six times without any evident decrease in activity. Kinetic experiments indicate that Co@NC₉₀₀ -promoted hydrogenation is the rate-determining step with a total apparent activation energy of 41±1 kJ mol^-1 . Theoretical investigations further reveal that Co@NC₉₀₀ can activate both H₂ and the nitro group of 2-nitroaniline. The observed energy barrier for H₂ dissociation is only 2.70 eV in the rate-determining step, owing to the presence of confined Co NPs in Co@NC₉₀₀ . Potential industrial application of the earth-abundant and non-noble transition metal catalysts is also explored for green and efficient synthesis of heterocyclic compounds.

Highly efficient hydrogenation reduction of aromatic nitro compounds using MOF derivative Co–N/C catalyst

 A unique MOF derivative core–shell Co–N/C catalyst exhibits porous structure with high specific area, high cobalt content (23%) and high nitrogen content (3%), resulting in the excellent hydrogenation reduction of nitro compounds.

Electrocatalytic degradation of humic acid using particle electrodes of activated carbon loaded with metallic cobalt

A column granular electrode loaded with metallic cobalt was prepared using powder activated carbon (namely Co/AC) and used in a continuous electrochemical reactor to degrade humic acid (HA). The results of XRD indicated that the form of catalyst prepared at 600 °C for 4 h mainly consisted of Co⁰, whereas it consisted of CoO when prepared at 450-500 °C for 4 h. The Co⁰ possessed better catalytic effects in the degradation of HA than CoO. When C₀ of HA was 200 mg L^-1, the C/C₀ approached 0.06-0.12 under 0.1 A, pH of 7.0, 0.01 M Na₂SO₄, and 20 min of hydraulic retention time (HRT). The current, HRT, initial pH, electrolyte type and concentration influenced the degradation of HA. The ESR signals indicated that both H∗ and OH were catalytically generated by Co/AC electrode. Compared to AC electrodes, the Co/AC electrodes showed a faster reaction Tafel slope (68 mV dec^-1) and larger electrochemical double-layer capacitance (C_dl = 1.93 mF cm^-2). The degradation and removal of HA was achieved by both the electro-oxidation and electro-reduction in the Co/AC electrode system.

Bimetallic CuFe nanoparticles as active and stable catalysts for chemoselective hydrogenation of biomass-derived platform molecules

Chemoselective hydrogenation of 5-(hydroxymethyl)furfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF) has been efficiently performed using bimetallic CuFe nanoparticles covered by thin carbon layers as catalysts.

One-step synthesis of carbon nanospheres with an encapsulated iron-nickel nanoalloy and its potential use as an electrocatalyst

For many years, in electrochemical processes, carbon nanostructures with metal support have been employed as electrodes due to their high surface area, chemical stability, and excellent performance as catalyst support by allowing a better electronic transfer. Nevertheless, on the surface, metallic nanoparticles are susceptible to corrosion. Instead, by encapsulating individual nanoparticles, they are protected. Among the carbon nanostructures, the most common are graphene, carbon nanotubes (CNTs), and carbon nanospheres (CNSs). Unlike CNTs and CNSs, graphene is difficult to obtain in mass production, limiting their applications. Regarding CNTs and CNSs, the latter presents better catalytic activity. Nonetheless, the process of synthesis of CNSs with metal inside is commonly made by time-consuming autoclave processes, some involving more than 43 h, and hence are expensive. Here, we suggest an advantageous synthesis of CNSs with an iron-nickel alloy encapsulated inside, by using a one-step chemical vapor deposition (CVD) process in less than 3 h. This material has potential applications for environmental and energy processes. According to the authors, the uses of iron-nickel alloys as an electrocatalyst for the ammonia oxidation reaction has not been proved. Thus, we evaluate the composite as an electrocatalyst for the ammonia oxidation reaction, an electrochemical process that offers environmental remediation and hydrogen as a fuel. The electrochemical characterization shows that the use of a bimetallic electrode improves the catalytic activity. In this case, nickel is the active specie and iron is the metal added which reduces the reaction potential. Besides, the composite presents high specific capacitance, better than other materials proposed such as graphene decorated with FeNi alloys. This behavior can be related to the variation of the catalyst morphology (supported vs. encapsulated) by improving the catalyst dispersion and particle size stabilization.

Highly Efficient Hydrogenation of Nitroarenes by N-Doped Carbon-Supported Cobalt Single-Atom Catalyst in Ethanol/Water Mixed Solvent

The cobalt single atoms supported on N-doped carbon (Co SAs/NC) were prepared by the direct pyrolysis of metal-organic framework (MOF) precursor. Compared with Co nanoparticle (NP) catalysts prepared by impregnation, the Co SAs/NC catalyst showed a much better performance in the selective hydrogenation of nitrobenzene, giving a specific activity 5.4 and 32.0 times higher than those of Co NPs supported on N-doped carbon and active carbon, respectively. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray absorption fine structure (XAFS), X-ray photoelectron spectra (XPS), N₂ adsorption-desorption isotherms, and X-ray diffraction (XRD) characterizations revealed that the atomically dispersed Co species and doped nitrogen atoms in carbon support contributed to the high activity of Co SAs/NC. The reaction rate and aniline selectivity were further remarkably enhanced by introducing water into the reaction system. By adding 30% water to the solvent of ethanol, the activity was increased from 43.2 to 76.8 h^-1 and the aniline selectivity was increased from 62.8 to 99.1%. Combining experimental results and density functional theory (DFT) calculations evidenced that the promoting effect of water addition was attributed to its differentiating ability in the competitive adsorption between nitrobenzene and aniline in the hydrogenation reaction. This catalytic system was highly efficient for the selective hydrogenation of various nitroarenes.

Ultrastable Magnetic Nanoparticles Encapsulated in Carbon for Magnetically Induced Catalysis

Magnetically induced catalysis using magnetic nanoparticles (MagNPs) as heating agents is a new efficient method to perform reactions at high temperatures. However, the main limitation is the lack of stability of the catalysts operating in such harsh conditions. Normally, above 500 °C, significant sintering of MagNPs takes place. Here we present encapsulated magnetic FeCo and Co NPs in carbon (Co@C and FeCo@C) as an ultrastable heating material suitable for high-temperature magnetic catalysis. Indeed, FeCo@C or a mixture of FeCo@C:Co@C (2:1) decorated with Ni or Pt-Sn showed good stability in terms of temperature and catalytic performances. In addition, consistent conversions and selectivities regarding conventional heating were observed for CO₂ methanation (Sabatier reaction), propane dehydrogenation (PDH), and propane dry reforming (PDR). Thus, the encapsulation of MagNPs in carbon constitutes a major advance in the development of stable catalysts for high-temperature magnetically induced catalysis.