Facile synthesis of perovskite LaMnO3+δ nanoparticles for the oxygen reduction reaction

Single Mo Atoms Stabilized on High-Entropy Perovskite Oxide: A Frontier for Aerobic Oxidative Desulfurization

The design and preparation of catalysts with both excellent stability and maximum exposure of catalytic active sites is highly desirable; however, it remains challenging in heterogeneous catalysis. Herein, a entropy-stabilized single-site Mo catalyst via a high-entropy perovskite oxide LaMn_0.2Fe_0.2Co_0.2Ni_0.2Cu_0.2O₃ (HEPO) with abundant mesoporous structures was initiated by a sacrificial-template strategy. The presence of electrostatic interaction between graphene oxide and metal precursors effectively inhibits the agglomeration of precursor nanoparticles in a high-temperature calcination process, thereby endowing the atomically dispersed Mo⁶⁺ coordinated with four O atoms on the defective sites of HEPO. The unique structure of single-site Mo atoms' random distribution with an atomic scale greatly enriches the oxygen vacancy and increases surface exposure of the catalytic active sites on the Mo/HEPO-SAC catalyst. As a result, the obtained Mo/HEPO-SAC exhibits robust recycling stability and ultra-high oxidation activity (turnover frequency = 3.28 × 10^-2) for the catalytic removal of dibenzothiophene (DBT) with air as the oxidant, which represents the top level and is strikingly higher than the state-of-the-art oxidation desulfurization catalysts reported previously under the same or similar reaction conditions. Therefore, the finding here for the first time expands the application of single-atom Mo-supported HEPO materials into the field of ultra-deep oxidative desulfurization.

Transition metal oxides with perovskite and spinel structures for electrochemical energy production applications

Transition metal oxide-based materials are an interesting alternative to substitute noble-metal based catalyst in energy conversion devices designed for oxygen reduction (ORR), oxygen evolution (OER) and hydrogen evolution reactions (HER). Perovskite (ABO₃) and spinel (AB₂O₄) oxides stand out against other structures due to the possibility of tailoring their chemical composition and, consequently, their properties. Particularly, the electrocatalytic performance of these materials depends on features such as chemical composition, crystal structure, nanostructure, cation substitution level, e_g orbital filling or oxygen vacancies. However, they suffer from low electrical conductivity and surface area, which affects the catalytic response. To mitigate these drawbacks, they have been combined with carbon materials (e.g. carbon black, carbon nanotubes, activated carbon, and graphene) that positively influence the overall catalytic activity. This review provides an overview on tunable perovskites (mainly lanthanum-based) and spinels featuring 3d metal cations such as Mn, Fe, Co, Ni and Cu on octahedral sites, which are known to be active for the electrochemical energy conversion.

Low temperature catalytic conversion of carbon monoxide by the application of novel perovskite catalysts

Automobile exhaust contributes the largest sources of carbon monoxide (CO) into the environment. To control this CO pollution, the catalytic converters have been discovered. The catalytic converters have been invented for regulating the CO discharge. There are many types of catalysts have been investigated for CO emission control purposes. Inorganic perovskite-type oxides are fascinating nanomaterials for wide applications in catalysis, fuel cells, and electrochemical sensing. Perovskites prepared in the nanoscale have recently received more attention due to their catalytic nature when used as electrode modifiers. Perovskite catalysts show great potential for CO oxidation catalyst in a catalytic converter for their low cost, high thermal stability and tailoring flexibility. It is active for CO oxidation at a lower temperature. The catalytic activity of these oxides is higher than that of many transition metals compounds and even some precious metal oxides. They represents attractive physical and chemical characteristics such as electronic conductivity, electrically active structure, the oxide ions mobility through the crystal lattice, variations on the content of the oxygen, thermal and chemical stability, and supermagnetic, photocatalytic, thermoelectric and dielectric properties. The surface sites and lattice oxygen species present in perovskite catalysts play an important role in chemical transformations. The partial replacement of cations A and B by different elements, which changes the atomic distance, causes unit cell disturbances, stabilizes various oxidation states or added cationic or anionic vacancies inside the lattice. The novel things disturb the solid reactivity by varying the reaction mechanism on the catalyst surface. Thus, the better cations replacement may represent more activity. There are lots of papers available to CO oxidation over perovskite catalysts but no review paper available in the literature that is represented to CO oxidation.

Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications

The global energy crisis is increasing the demand for innovative materials with high purity and functionality for the development of clean energy production and storage. The development of novel photo- and electrocatalysts significantly depends on synthetic techniques that facilitate the production of tailored advanced nanomaterials. The emerging use of pulsed laser in liquid synthesis has attracted immense interest as an effective synthetic technology with several advantages over conventional chemical and physical synthetic routes, including the fine-tuning of size, composition, surface, and crystalline structures, and defect densities and is associated with the catalytic, electronic, thermal, optical, and mechanical properties of the produced nanomaterials. Herein, we present an overview of the fundamental understanding and importance of the pulsed laser process, namely various roles and mechanisms involved in the production of various types of nanomaterials, such as metal nanoparticles, oxides, non-oxides, and carbon-based materials. We mainly cover the advancement of photo- and electrocatalytic nanomaterials via pulsed laser-assisted technologies with detailed mechanistic insights and structural optimization along with effective catalytic performances in various energy and environmental remediation processes. Finally, the future directions and challenges of pulsed laser techniques are briefly underlined. This review can exert practical guidance for the future design and fabrication of innovative pulsed laser-induced nanomaterials with fascinating properties for advanced catalysis applications.

Tailoring electrocatalytic activity of in situ crafted perovskite oxide nanocrystals via size and dopant control

Perovskite oxides (ABO3) have been widely recognized as a class of promising noble-metal-free electrocatalysts due to their unique compositional flexibility and structural stability. Surprisingly, investigation into their size-dependent electrocatalytic properties, in particular barium titanate (BaTiO3), has been comparatively few and limited in scope. Herein, we report the scrutiny of size- and dopant-dependent oxygen reduction reaction (ORR) activities of an array of judiciously designed pristine BaTiO3 and doped BaTiO3 (i.e., La- and Co-doped) nanoparticles (NPs). Specifically, a robust nanoreactor strategy, based on amphiphilic star-like diblock copolymers, is employed to synthesize a set of hydrophobic polymer-ligated uniform BaTiO3 NPs of different sizes (≤20 nm) and controlled compositions. Quite intriguingly, the ORR activities are found to progressively decrease with the increasing size of BaTiO3 NPs. Notably, La- and Co-doped BaTiO3 NPs display markedly improved ORR performance over the pristine counterpart. This can be attributed to the reduced limiting barrier imposed by the formation of -OOH species during ORR due to enhanced adsorption energy of intermediates and the possibly increased conductivity as a result of change in the electronic states as revealed by our density functional theory-based first-principles calculations. Going beyond BaTiO3 NPs, a variety of other ABO3 NPs with tunable sizes and compositions may be readily accessible by exploiting our amphiphilic star-like diblock copolymer nanoreactor strategy. They could in turn provide a unique platform for both fundamental and practical studies on a suite of physical properties (dielectric, piezoelectric, electrostrictive, catalytic, etc.) contingent upon their dimensions and compositions.

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

High-Efficiency of Bi-Functional-Based Perovskite Nanocomposite for Oxygen Evolution and Oxygen Reduction Reaction: An Overview

High efficient, low-cost and environmentally friendly-natured bi-functional-based perovskite electrode catalysts (BFPEC) are receiving increasing attention for oxygen reduction/oxygen evolution reaction (ORR/OER), playing an important role in the electrochemical energy conversion process using fuel cells and rechargeable batteries. Herein, we highlighted the different kinds of synthesis routes, morphological studies and electrode catalysts with A-site and B-site substitution co-substitution, generating oxygen vacancies studies for boosting ORR and OER activities. However, perovskite is a novel type of oxide family, which shows the state-of-art electrocatalytic performances in energy storage device applications. In this review article, we go through different types of BFPECs that have received massive appreciation and various strategies to promote their electrocatalytic activities (ORR/OER). Based on these various properties and their applications of BFPEC for ORR/OER, the general mechanism, catalytic performance and future outlook of these electrode catalysts have also been discussed.

Porous calcium–manganese oxide/carbon nanotube microspheres as efficient oxygen reduction catalysts for rechargeable zinc–air batteries

CaMnO_3−δ/carbon nanotubes show excellent oxygen reduction reaction activity benefitting from their unique porous structure and synergistic coupling between CaMnO_3−δ and carbon nanotubes.

Room-Temperature Laser Synthesis in Liquid of Oxide, Metal-Oxide Core-Shells, and Doped Oxide Nanoparticles

Although oxide nanoparticles are ubiquitous in science and technology, a multitude of compositions, phases, structures, and doping levels exist, each one requiring a variety of conditions for their synthesis and modification. Besides, experimental procedures are frequently dominated by high temperatures or pressures and by chemical contaminants or waste. In recent years, laser synthesis of colloids emerged as a versatile approach to access a library of clean oxide nanoparticles relying on only four main strategies running at room temperature and ambient pressure: laser ablation in liquid, laser fragmentation in liquid, laser melting in liquid and laser defect-engineering in liquid. Here, established laser-based methodologies are reviewed through the presentation of a panorama of oxide nanoparticles which include pure oxidic phases, as well as unconventional structures like defective or doped oxides, non-equilibrium compounds, metal-oxide core-shells and other anisotropic morphologies. So far, these materials showed several useful properties that are discussed with special emphasis on catalytic, biomedical and optical application. Yet, given the endless number of mixed compounds accessible by the laser-assisted methodologies, there is still a lot of room to expand the library of nano-crystals and to refine the control over products as well as to improve the understanding of the whole process of nanoparticle formation. To that end, this review aims to identify the perspectives and unique opportunities of laser-based synthesis and processing of colloids for future studies of oxide nanomaterial-oriented sciences.

Alternative pathways to α,β-unsaturated ketones via direct oxidative coupling transformation using Sr-doped LaCoO3 perovskite catalyst

A strontium-doped lanthanum cobaltite perovskite material was prepared, and used as a recyclable and effective heterogeneous catalyst for the direct oxidative coupling of alkenes with aromatic aldehydes to produce α,β-unsaturated ketones. The reaction afforded high yields in the presence of di-tert-butylperoxide as oxidant. Single oxides or salts of strontium, lanthanum and cobalt, and the undoped perovskite offered a lower catalytic activity than the strontium-doped perovskite. Benzaldehyde could be replaced by benzyl alcohol, dibenzyl ether, 2-oxo-2-phenylacetaldehyde, 2-bromoacetophenone or (dimethoxymethyl) benzene in the oxidative coupling reaction with alkenes. To our best knowledge, reactions between these starting materials with alkenes are new and unknown in the literature.

Perovskite Electrocatalysts for the Oxygen Reduction Reaction in Alkaline Media

Oxygen reduction is considered a key reaction for electrochemical energy conversion but slow kinetics hamper application in fuel cells and metal-air batteries. In this review, the prospect of perovskite oxides for the oxygen reduction reaction (ORR) in alkaline media is reviewed with respect to fundamental insight into activity and possible mechanisms. For gaining these insights, special emphasis is placed on highly crystalline perovskite films that have only recently become available for electrochemical interrogation. The prospects for applications are evaluated based on recent progress in the synthesis of perovskite nanoparticles. The review concludes with the current understanding of oxygen reduction on perovskite oxides and a perspective on opportunities for future fundamental and applied research.