Enhanced UV–Vis photocatalytic performance of the CuInS 2 /TiO 2 /SnO 2 hetero-structure for air decontamination

Copper indium sulfide quantum dots in photocatalysis

Since the advent of photocatalytic technology, scientists have been searching for semiconductor materials with high efficiency in solar energy utilization and conversion to chemical energy. Recently, the development of quantum dot (QD) photocatalysts has attracted much attention because of their unique characteristics: small size, quantum effects, strong surface activity, and wide photoresponse range. Among ternary chalcogenide semiconductors, CuInS₂ QDs are increasingly examined in the field of photocatalysis due to their high absorption coefficients, good matching of the absorption range with sunlight spectrum, long lifetimes of photogenerated electron-hole pairs and environmental sustainability. In this review paper, the structural and electronic properties, synthesis methods and various photocatalytic applications of CuInS₂ QDs are systematically expounded. The current research status on the photocatalytic properties of materials based on CuInS₂ QD is discussed combined with the existing modification approaches for the enhancement of their performances. Future challenges and new development opportunities of CuInS₂ QDs in the field of photocatalysis are then prospected.

Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

Semiconducting SnO₂ photocatalyst nanomaterials are extensively used in energy and environmental research because of their outstanding physical and chemical properties. In recent years, nitrogen oxide (NO _x ) pollutants have received particular attention from the scientific community. The photocatalytic NO _x oxidation will be an important contribution to mitigate climate change in the future. Existing review papers mainly focus on applying SnO₂ materials for photocatalytic oxidation of pollutants in the water, while studies on the decomposition of gas pollutants are still being developed. In addition, previous studies have shown that the photocatalytic activity regarding NO _x decomposition of SnO₂ and other materials depends on many factors, such as physical structure and band energies, surface and defect states, and morphology. Recent studies have been focused on the modification of properties of SnO₂ to increase the photocatalytic efficiency of SnO₂, including bandgap engineering, defect regulation, surface engineering, heterojunction construction, and using co-catalysts, which will be thoroughly highlighted in this review.

Enhancing the Photocatalytic Activity of SnO2-TiO2 and ZnO-TiO2 Tandem Structures Toward Indoor Air Decontamination

ZnO-TiO2 and SnO2-TiO2 tandem structures were developed using the doctor blade technique. It was found that by employing organic hydrophilic and hydrophobic as additives into the precursor it is possible to tailor the film density and morphology with direct consequences on the photocatalytic activity of the tandem structures. The highest photocatalytic efficiency corresponds to ZnO-TiO2 and can reach 74.04% photocatalytic efficiency toward acetaldehyde when a hydrophilic additive is used and 70.93% when a hydrophobic additive is employed. The snO2-TiO2 tandem structure presents lower photocatalytic properties (61.35 % when the hydrophilic additive is used) with a constant rate reaction of 0.07771 min-1.

Simultaneous Adsorption and Photocatalysis Processes Based on Ternary TiO2–CuxS–Fly Ash Hetero-Structures

Ternary composites of TiO2–CuxS–fly ash were used in simultaneous adsorption and photocatalysis processes for the removal of organic (dye) pollutants. Composites of semiconductor (TiO2, CuxS) nanomaterials hosted within matrices of fly ash, such as film heterostructures, are promising materials for advanced wastewater treatment. The combination of adsorption and photocatalysis processes was investigated in the removal of methylene blue (MB), considered as a standard in photocatalysis. Ternary film heterostructures obtained by doctor blade technique allows overcoming the separation step of particles from treated wastewater. The comparison between the adsorption and photodegradation tests performed with TiO2–CuxS–fly ash showed that in dark conditions, the MB removal was 75% after 360 min, while in the presence of UV radiation, almost total dismissal of MB was achieved in the same treatment period. The degradation rate of MB, when H2O2 is used as an electron acceptor, could reach 90% in adsorption and 99% in simultaneous adsorption/photocatalysis processes. The adsorption isotherm was found to follow the Langmuir and Freundlich models.

Volatile Organic Compounds (VOCs) Removal from Indoor Air by Heterostructures/Composites/Doped Photocatalysts: A Mini-Review

The impact of volatile organic compounds (VOCs) on indoor air quality and, furthermore, on human health is still a subject of research investigations considering the large increase in forms of cancer and related diseases. VOCs can be 10 times higher in indoor air concentrations then that of the outdoors, as a consequence of emissions from electronics, building materials and consumer goods. Direct transformation of VOCs in mineralization products seems to be an alternative to reduce indoor air contaminants. The advantage of photocatalysis implementation in indoor air treatment is given by the absence of additional chemicals (such as H2O2) and waste. The present mini-review presents a comparative study on VOCs photocatalytic removal considering the photocatalyst composition, morphology and specific surface. The sheet-like morphology seems to provide a higher number of active sites which may contribute to oxidative reactions. The insertion of materials able to increase light absorbance or to mediate the charge carrier's transport will have a beneficial impact on the overall photocatalytic efficiency. Additionally, surface chemistry must be considered when developing photocatalysts for certain gas pollutants in order to favor molecule absorbance in the interfacial region. An energy consumption perspective is given based on the light intensity and irradiation period.

The Influence of Photoactive Heterostructures on the Photocatalytic Removal of Dyes and Pharmaceutical Active Compounds: A Mini-Review

The diversification of pollutants type and concentration in wastewater has underlined the importance of finding new alternatives to traditional treatment methods. Advanced oxidation processes (AOPs), among others, are considered as promising candidate to efficiently remove organic pollutants such as dyes or pharmaceutical active compounds (PhACs). The present minireview resumes several recent achievements on the implementation and optimization of photoactive heterostructures used as photocatalysts for dyes and PhACs removal. The paper is focused on various methods of enhancing the heterostructure photocatalytic properties by optimizing parameters such as synthesis methods, composition, crystallinity, morphology, pollutant concentration and light irradiation.

The Influence of Light Irradiation on the Photocatalytic Degradation of Organic Pollutants

The design of a photocatalytic process must consider intrinsic and extrinsic parameters affecting its overall efficiency. This study aims to outline the importance of balancing several factors, such as radiation source, total irradiance, photon flux, catalyst substrate, and pollutant type in order to optimize the photocatalytic efficiency. Titanium oxide was deposed by the doctor blade technique on three substrates (microscopic glass (G), flour-doped tin oxide (FTO), and aluminum (Al)), and the photocatalytic properties of the samples were tested on two pollutants (tartrazine (Tr) and acetamiprid (Apd)). Seven irradiation scenarios were tested using different ratios of UV-A, UV-B + C, and Vis radiations. The results indicated that the presence of a conductive substrate and a suitable ratio of UV-A and Vis radiations could increase the photocatalytic efficiency of the samples. Higher efficiencies were obtained for the sample Ti_FTO (58.3% for Tr and 70.8% for Apd) and the sample Ti_Al (63.8% for Tr and 82.3% for Apd) using a mixture of three UV-A and one Vis sources (13.5 W/m² and 41.85 μmol/(m²·s)). A kinetic evaluation revealed two different mechanisms of reaction: (a) a one-interval mechanism related to Apd removal by Ti_FTO, Ti_Al (scenarios 1, 4, 5, and 7), and Ti_G samples (scenario 7) and (b) a two-interval mechanism in all other cases.

CuInS2/Mg(OH)2 Nanosheets for the Enhanced Visible-Light Photocatalytic Degradation of Tetracycline

CuInS₂/Mg(OH)₂ (CIS/Mg(OH)₂) nanosheets have been prepared for the visible light activated photodegradation of tetracycline hydrochloride (TCH). The introduction of CuInS₂ has proven to enhance the photocatalytic activity of Mg(OH)₂ nanosheets. It’s ascribed to the enhanced transfer and separation of charge carriers at the junction interface between CuInS₂ and Mg(OH)₂. The photocatalytic activity of obtained CIS/Mg(OH)₂ is greatly affected by CuInS₂ content, pH value, and inorganic ions. Among these samples, 2-CIS/Mg(OH)₂ exhibits the excellent photocatalytic activity and durability for the visible light driven removal of TCH after five cycle times. Atomic force microscope (AFM) images indicate that the surface roughness of 2-CIS/Mg(OH)₂ is intensively influenced in adsorption-photocatalysis process. The •O₂⁻ and •OH radicals are vital for the visible light driven photocatalytic activity of 2-CIS/Mg(OH)₂ for TCH removal.

Highly Active Agro-Waste-Extracted Cellulose-Supported CuInS2 Nanocomposite for Visible-Light-Induced Photocatalysis

Agro-waste-extracted cellulose-supported CuInS₂ nanocomposites were hydrothermally synthesized with significant photocatalytic activity under the influence of cellulose as a polymeric natural support that offers delay in electron-hole life. Delayed recombination process of electrons and holes was perceived by parting of cellulose as a barrier or edge during photochemical reaction, which overall enhances the lifetime of photocatalyst. The photodegradation efficiency over five consecutive cycles along with scavenging studies have been examined for RhB dye under visible light. The boosted photodegradation rate was observed at an optimum amount of cellulose (200 mg), which is ∼10 times higher than pristine CuInS₂.