Spatially isolated palladium in porous organic polymers by direct knitting for versatile organic transformations

Palladium Catalysts Supported in Microporous Phosphine Polymer Networks

A new set of microporous organic polymers (POPs) containing diphosphine derivatives synthesized by knitting via Friedel-Crafts has been attained. These amorphous three-dimensional materials have been prepared by utilizing diphosphines, 1,3,5-triphenylbenzene, and biphenyl as nucleophile aromatic groups, dimethoxymethane as the electrophilic linker, and FeCl3 as a promoting catalyst. These polymer networks display moderate thermal stability and high microporosity, boasting BET surface areas above 760 m2/g. They are capable of coordinating with palladium acetate, using the phosphine derivative as an anchoring center, and have proven to be highly efficient catalysts in Suzuki-Miyaura coupling reactions involving bromo- and chloroarenes under environmentally friendly (using water and ethanol as solvents) and aerobic conditions. These supported catalysts have achieved excellent turnover numbers (TON) and turnover frequencies (TOF), while maintaining good recyclability without significant loss of activity or Pd leaching after five consecutive reaction cycles.

Hyper crosslinked polymer supported NHC stabilized gold nanoparticles with excellent catalytic performance in flow processes

Highly active and selective heterogeneous catalysis driven by metallic nanoparticles relies on a high degree of stabilization of such nanomaterials facilitated by strong surface ligands or deposition on solid supports. In order to tackle these challenges, N-heterocyclic carbene stabilized gold nanoparticles (NHC@AuNPs) emerged as promising heterogeneous catalysts. Despite the high degree of stabilization obtained by NHCs as surface ligands, NHC@AuNPs still need to be loaded on support structures to obtain easily recyclable and reliable heterogeneous catalysts. Therefore, the combination of properties obtained by NHCs and support structures as NHC bearing "functional supports" for the stabilization of AuNPs is desirable. Here, we report the synthesis of hyper-crosslinked polymers containing benzimidazolium as NHC precursors to stabilize AuNPs. Following the successful synthesis of hyper-crosslinked polymers (HCP), a two-step procedure was developed to obtain HCP·NHC@AuNPs. Detailed characterization not only revealed the successful NHC formation but also proved that the NHC functions as a stabilizer to the AuNPs in the porous polymer network. Finally, HCP·NHC@AuNPs were evaluated in the catalytic decomposition of 4-nitrophenol. In batch reactions, a conversion of greater than 99% could be achieved in as little as 90 s. To further evaluate the catalytic capability of HCP·NHC@AuNP, the catalytic decomposition of 4-nitrophenol was also performed in a flow setup. Here the catalyst not only showed excellent catalytic conversion but also exceptional recyclability while maintaining the catalytic performance.

Surface Modification of 2D Photocatalysts for Solar Energy Conversion

2D materials show many particular properties, such as high surface-to-volume ratio, high anisotropic degree, and adjustable chemical functionality. These unique properties in 2D materials have sparked immense interest due to their applications in photocatalytic systems, resulting in significantly enhanced light capture, charge-transfer kinetics, and surface reaction. Herein, the research progress in 2D photocatalysts based on varied compositions and functions, followed by specific surface modification strategies, is introduced. Fundamental principles focusing on light harvesting, charge separation, and molecular adsorption/activation in the 2D-material-based photocatalytic system are systemically explored. The examples described here detail the use of 2D materials in various photocatalytic energy-conversion systems, including water splitting, carbon dioxide reduction, nitrogen fixation, hydrogen peroxide production, and organic synthesis. Finally, by elaborating the challenges and possible solutions for developing these 2D materials, the review is expected to provide some inspiration for the future research of 2D materials used on efficient photocatalytic energy conversions.

Enhancing stability by trapping palladium inside N-heterocyclic carbene-functionalized hypercrosslinked polymers for heterogeneous C-C bond formations

Catalyst deactivation caused by the aggregation of active metal species in the reaction process poses great challenges for practical applications of supported metal catalysts in solid-liquid catalysis. Herein, we develop a hypercrosslinked polymer integrated with N-heterocyclic carbene (NHC) as bifunctional support to stabilize palladium in heterogeneous C-C bond formations. This polymer supported palladium catalyst exhibits excellent stability in the one-pot fluorocarbonylation of indoles to four kinds of valuable indole-derived carbonyl compounds in cascade or sequential manner, as well as the representative Suzuki-Miyaura coupling reaction. Investigations on stabilizing effect disclose that this catalyst displays a molecular fence effect in which the coordination of NHC sites and confinement of polymer skeleton contribute together to stabilize the active palladium species in the reaction process. This work provides new insight into the development of supported metal catalysts with high stability and will also boost their efficient applications in advanced synthesis.

Catalyst deactivation caused by the aggregation of active metal species poses great challenges for supported metal catalyzed solid-liquid reactions. Here, the authors develop a hypercrosslinked polymer integrated with N-heterocyclic carbene (NHC) as bifunctional support to stabilize palladium in heterogeneous C-C bond formations.

Iron-Catalyzed Oxidative Decarbonylative α-Alkylation of Acyl-Substituted Furans with Aliphatic Aldehydes as the Alkylating Agents

A protocol for FeCl₂-catalyzed oxidative decarbonylative α-alkylation of acyl furans using alkyl aldehydes as the alkylating agents has been developed. This protocol affords α-alkyl-α-acylfurans in moderate to good yields in a practical and sustainable fashion. Mechanistic studies suggest that the reaction proceeds via generation of an alkyl radical from the alkyl aldehyde, addition of the radical to the furan ring, and subsequent rearomatization.

Hollow porous organic nanospheres for anchoring Pd(PPh3)4 through a co-hyper-crosslinking mediated self-assembly strategy

A facile synthesis of Pd(PPh₃)₄-functionalized hollow porous organic nanospheres with excellent catalytic activity is reported for the first time.

A DNA-mimic contact-active functional group for antifouling ultrafiltration membranes

Despite advanced materials and techniques to reduce the fouling issue of membranes, 10-30% of the cost of ultrafiltration (UF) processes have been spent on membrane cleaning. Particularly in water treatment, the traditional heavy metal-based method is challenged due to its environmental pollution risk and increasing public health awareness. Here, we report the synthesis of a metal-free contact-active antifouling and antimicrobial membrane by covalently functionalizing a commercial polyacrylonitrile (PAN) UF membrane with 2,4-diamino-1,3,5-triazine (DAT) via a one-step catalyst-free hydrothermal [4 + 2] cyclization of dicyandiamide reaction. The proposed mechanism of the antimicrobial activity of the DAT-functionalized membrane is through strong attraction between the DAT groups and the microbial membrane protein via strong hydrogen bonding, leading to microbial membrane disruption and thus microbe death. A high water flux and good reusability of the membrane against protein in a UF experiment were achieved. The low cost, easy availability of the compounds, as well as the facile reaction offer a high potential of the membrane for real applications in ultrafiltration.

Palladium/phosphorus-functionalized porous organic polymer with tunable surface wettability for water-mediated Suzuki–Miyaura coupling reaction

A series of phosphorus-functionalized porous organic polymers supported palladium catalysts with tunable surface wettability were successfully prepared using an easy copolymerization and successive immobilization method. The obtained polymers were carefully characterized by many physicochemical methods. Characterization results suggested that the prepared materials featured hierarchically porous structures, high pore volumes, tunable surface wettability and strong electron-donating ability towards palladium species. We demonstrated the use of these solid catalysts for water-mediated Suzuki–Miyaura coupling reactions. It was found that the surface wettability of the prepared catalysts has an important influence on their catalytic activities. The optimal catalyst, which has excellent amphipathicity and relatively high phosphorus concentration, displayed superior catalytic activity compared to the other catalysts. Under ambient conditions, a variety of aryl chlorides can be efficiently transformed to biaryls in high yields. Moreover, the catalyst could be easily recovered and reused at least six times.

A palladium/phosphorus-functionalized porous organic polymer with tunable surface wettability was successfully prepared. The catalyst displayed high catalytic activity for the water-mediated Suzuki–Miyaura coupling reaction of aryl chlorides.

A step forward in solvent knitting strategies: ruthenium and gold phosphine complex polymerization results in effective heterogenized catalysts

A knitting strategy has been applied to obtain metal–phosphine porous organic polymers (Kphos(M)), resulting in effective heterogenized catalysts for different reactions.

Palladium Nanoparticles Supported on Triphenylphosphine-Functionalized Porous Polymer as an Active and Recyclable Catalyst for the Carbonylation of Chloroacetates

Dialkyl malonates are important organic intermediates that are widely used as building blocks in organic synthesis. Herein, palladium nanoparticles supported on a triphenylphosphine-functionalized porous polymer were successfully developed as an efficient and recyclable catalyst for the synthesis of dialkyl malonates via the catalytic carbonylation of chloroacetates. The influence of reaction parameters such as solvent, base, and promoter on activity was carefully investigated. With a 1 mol% of palladium usage, excellent yields of dialkyl malonates were obtained. Importantly, the catalyst can be easily separated and reused at least four times, without a significant loss in reactivity. Furthermore, the developed catalyst was also highly active for the alkoxycarbonylation of α-chloro ketones.

Single-Site Ruthenium Pincer Complex Knitted into Porous Organic Polymers for Dehydrogenation of Formic Acid

Owing to its capacity for reversible hydrogen storage, formic acid (FA) holds great promise as an alternative energy carrier to conventional fossil fuel systems. Whereas the decomposition of FA to hydrogen (H₂ ) and carbon dioxide (CO₂ ) through homogeneous catalysis is well established, the selective and efficient dehydrogenation of FA by a robust heterogeneous catalyst remains a challenge. A new heterogeneous ruthenium pincer framework with single-atomic sites was prepared in one step by the direct knitting of a phosphorus-nitrogen PN³ P-pincer ruthenium complex in a porous organic polymer. The heterogeneous ruthenium complex efficiently dehydrogenates formic acid in both organic and aqueous media with remarkably enhanced stability. Notably, no detectable CO was generated and a turnover number (TON) of 145 300 was attained in a continuous experiment with no significant decline in catalytic activity (in sharp contrast, a total TON of only 5600 was obtained with the homogeneous analog under the same conditions). The single-atomic sites in the porous framework combined the desirable attributes of high reactivity and selectivity of a homogeneous catalyst with the significantly enhanced catalyst stability and reusability benefits of heterogeneous catalysis.

Porphyrin-based porous polyimide polymer/Pd nanoparticle composites as efficient catalysts for Suzuki–Miyaura coupling reactions

Two porphyrin-based porous polyimide polymer/Pd nanoparticle composites were synthesized, which exhibit high stability and excellent catalytic efficiency as Suzuki–Miyaura coupling catalysts.