A facile hydrothermal synthesis of novel hollow triple-shell CuNiFe2O4 nanospheres with robust catalytic performance in the Suzuki–Miyaura coupling reaction

Fe3O4@WO3-E-SMTU-NiII: as an environmentally-friendly, recoverable, durable and noble-free nanostructured catalyst for C-C bond formation reaction in green media

In the present study, NiII immobilized on Fe3O4@WO3 functionalized by aminated epichlorohydrin using S-methylisothiourea (Fe3O4@WO3-E-SMTU-NiII) as a novel magnetically separable nanostructured catalyst was successfully synthesized and characterized using FT-IR, XRD, TEM, FE-SEM, EDX, EDX mapping, VSM, TGA, H2-TPR, ICP-OES and CHNS techniques. Characterization results revealed the spherical morphology and superparamagnetic behaviour of the as-synthesized catalyst with mean diameters of 19-31 nm as well as uniform distributions of the desired elements (Fe, O, W, C, N, S and Ni). The antibacterial activity of Fe3O4@WO3-E-SMTU-NiII was evaluated against a set of Gram positive and Gram negative bacteria, and the catalyst showed considerable activity against the Staphylococcus aureus strain. The aforementioned nanostructured catalyst exhibited perfect catalytic efficiency in the Heck-Mizoroki and Suzuki-Miyaura reactions under mild conditions without using toxic solvents (EtOH as a green solvent and WEB as a benign base). Desired coupled products were obtained from the reaction of different Ar-X (X = I, Br, Cl) with alkyl acrylates and arylboronic acids. A high nickel content with negligible metal leaching during the course of reactions led to the high catalytic performance and stability of Fe3O4@WO3-E-SMTU-NiII under optimized reaction conditions. The magnetically separation and ease of recovery and reusability of up to six cycles without a discernible decrease in catalytic activity or metal leaching are the most important features of the catalytic system from both industrial and environmental viewpoints.

Design, fabrication and characterization of mesoporous yolk-shell nanocomposites as a sustainable heterogeneous nanocatalyst for synthesis of ortho-aminocarbonitrile tetrahydronaphthalenes

A new structure of mesoporous spherical nanocomposites was designed and easily prepared from the reaction between NiCuFe2O4 nanoparticles and mesoporous silica in three steps. The prepared multi-yolk@shell NiCuFe2O4@mSiO2 mesoporous sphere was characterized by using FT-IR, XRD, VSM, EDX, BET, FE-SEM and HR-TEM techniques. This unique mesoporous nanocomposite sphere as a heterogeneous nanocatalyst has demonstrated highly catalytic activity for the green synthesis of tetrahydronaphthalene derivatives in 92-98% yields at reaction times of 60-75 min. This process was carried out through multi-component reaction of the cyclic ketone, malononitrile and aromatic aldehyde under solvent-free conditions. Furthermore, the procedure was optimized on the basis of catalyst loading amounts, various solvents and temperature conditions. This novel methodology exposes obvious benefits such as; catalyst reusability, easy reaction procedure, simplicity of work-up, excellent product yields and short reaction times.

Design, Fabrication and Characterization of Multi-Yolk@Shell NiCuFe2 O4 @mSiO2 Mesoporous Nanocomposite Spheres for the Synthesis of Pyrimido-Quinolines under Solvent-Free Conditions

Multi-yolk@shell mesoporous silica spheres are becoming more and more attractive as high-performance catalysts because of their high surface areas, variable pore sizes, and low densities. In this work, a NiCuFe2 O4 magnetic core with a shell of mesoporous silica mesoporous has been prepared in an easy two-step procedure. The prepared multi-yolk@shell NiCuFe2 O4 @mSiO2 spheres were characterized by using FT-IR, XRD, VSM, EDX, BET, FE-SEM and HR-TEM techniques. These unique multi-yolk@shell NiCuFe2 O4 @mSiO2 spheres demonstrated high catalytic activity for the synthesis of pyrimidoquinolines. Also, this method exposes obvious benefits such as catalyst recyclability, easy reaction condition, simplicity of work up, high product yields and short reaction times.

Nickel ferrite nanoparticles doped on hollow carbon microspheres as a novel reusable catalyst for synthesis of N-substituted pyrrole derivatives

Pyrroles are widely spread worldwide because of their critical applications, especially pharmacology. An expedition method for one-pot synthesis of N-substituted pyrrole derivatives has been presented by a reaction between 2,5-dimethoxytetrahydrofuran and various primary aromatic amines in the presence of NiFe₂O₄ anchored to modified carbon hollow microspheres (NiFe₂O₄@MCHMs) as a recoverable reactive catalyst. The Classon-Kass method has been used to synthesize the pyrroles in excellent yields and short reaction times in the same direction with green chemistry rules. This reaction was carried out by employing NiFe₂O₄@MCHMs as a catalyst to make a simple procedure with short activation energy in water as an accessible, non-toxic, and biodegradable solvent. This catalyst provides a promising pathway to synthesize N-substituted pyrroles several times in a row through the recyclability without remarkable loss of its catalytic activity. The NiFe₂O₄@MCHMs nanocatalyst was characterized by applying FT-IR, XRD, FE-SEM, TEM, EDS, BET, TGA, VSM, and elemental mapping techniques. Also, the synthesized N-substituted pyrrole derivatives were identified using melting point, FT-IR, and ¹H NMR analyses.

Fabrication and characterization of mesoporous yolk-shell nanocomposites as an effective reusable heterogeneous base catalyst for the synthesis of ortho-aminocarbonitrile tetrahydronaphthalenes

Mesoporous yolk-shell nanocomposites (MYSNs) were loaded with a mobile CaMg core inside the silica shell. CaMg@MYS nanocomposites have been effectively prepared inside the inner cavity of a novel structure that consists of hollow mesoporous silica spheres. Tetraethyl orthosilicate (TEOS) and an amount of cetyltrimethylammonium bromide (CTAB) are coated on the carbon spheres used as a hard template in the multi-step synthetic procedure. In this method, the target products were obtained in high to excellent yields between 87-96% and quick response times between 10-20 minutes under mild conditions. The CaMg@MYS catalyst shows promise as an efficient and reusable catalyst in multicomponent processes. The CaMg@MYS multi-yolk spheres compared to metal oxide nanostructures indicated both high catalytic performance and a significant factor as a novelty. To identify each product, FT-IR, ¹H NMR, and melting point techniques were applied. Also, in order to characterize the prepared catalysts, FT-IR, XRD, FE-SEM, EDS, elemental mapping, and HR-TEM techniques were applied.

Preparation and characterization of doped hollow carbon spherical nanostructures with nickel and cobalt metals and their catalysis for the green synthesis of pyridopyrimidines

Fused heterocyclic systems containing the pyrimidine ring structure perform a significant role in numerous biological and pharmaceutical processes. Their properties include antibacterial, antifungal, anti-fever, anti-tumor, and antihistamine. As pyridopyrimidines are important in the essential fields of pharmaceutical chemistry, efficient methods for preparing these heterocycles are presented. In this study, a method for producing improved hollow carbon sphere nanostructures with cobalt and nickel (Co-Ni@HCSs) is presented. The nanocatalyst was prepared and identified by applying Fourier-transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), Brunauer-Emmett-Teller (BET), and elemental mapping techniques. The Co-Ni@HCSs nanocatalyst was proved to be highly efficient in synthesizing pyranopyrimidine derivatives. The sizeable active site, economic catalyst loading, easy workup, reusability, green reaction conditions, and excellent yields of all derivatives are some of the significant features of this process. Also, applying response surface methodology (RSM) and the Box-Behnken design (BBD) techniques allowed us to determine the influential factors of the laboratory variables and identify the optimum conditions for superior catalytic activity. Finally, synthesized organic compounds were identified by utilizing melting point, FT-IR, and hydrogen-1 nuclear magnetic resonance (¹H NMR) analyses.

Capability of copper-nickel ferrite nanoparticles loaded onto multi-walled carbon nanotubes to degrade acid blue 113 dye in the sonophotocatalytic treatment process

In this study, copper-nickel ferrite (CuNiFe₂O₄) nanoparticles were successfully loaded onto multi-walled carbon nanotubes (MWCNTs) by using the coprecipitation method and used as new catalysts (MWCNT-CuNiFe₂O₄) in the sonophotocatalytic degradation process of the acid blue 113 (AB113) dye. The success of the MWCNT-CuNiFe₂O₄ synthesis and its properties were determined by analyzing it using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). A high efficiency of dye removal (100%), total organic carbon (93%), and chemical oxygen demand (95%) were achieved with the following conditions: pH of dye solution = 5, MWCNT-CuNiFe₂O₄ dosage = 0.6 g/L, AB113 dye concentration = 50 mg/L, UV light intensity = 36 W, ultrasonic wave frequency = 35 kHz, and treatment time = 30 min. The kinetic results revealed that the efficiency of the sonophotocatalytic process using MWCNT-CuNiFe₂O₄ was higher than that of the sonolysis, photolysis, photocatalysis, and sonocatalysis processes. Scavenging studies demonstrated that the holes (h⁺) and hydroxyl radical (•OH) were the main reactive species for the AB113 dye degradation. The stability and recyclability of MWCNT-CuNiFe₂O₄ were confirmed with eight consecutive cycles for a maximum efficiency of more than 92%. The high rate of BOD₅/COD indicated that the sonophotocatalytic process had the potential to degrade the dye into degradable compounds. The toxicity study with an Escherichia coli growth inhibition rate emphasized that MWCNT-CuNiFe₂O₄ in the sonophotocatalytic degradation process of the AB113 dye had a significant effect on reducing toxicity, when compared to processes of photolysis and photocatalysis. During the sonophotocatalytic process using MWCNT-CuNiFe₂O₄, the AB113 dye was mineralized into CO₂, H₂O, NH₄⁺, NO₃^-, and SO₄^2-. The results of the present study proved that the MWCNT-CuNiFe₂O₄-based sonophotocatalytic process was a promising dye degradation technology to protect the aquatic environment.

Magnetic CuNiFe2O4 nanoparticles loaded on multi-walled carbon nanotubes as a novel catalyst for peroxymonosulfate activation and degradation of reactive black 5

Novel copper-nickel ferrite nanocatalyst loaded on multi-walled carbon nanotube (MWCNTs-CuNiFe₂O₄) was synthesized and applied to activate peroxymonosulfate (PMS) in the degradation of the reactive black 5 (RB5). The structure of the catalyst was well characterized by scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD). The MWCNTs-CuNiFe₂O₄/PMS system showed a high performance in the degradation of RB5 with a kinetic rate of 1.5-2.5 times higher than homogeneous and heterogeneous systems. Maximum degradation efficiency (99.60%) was obtained at an initial pH of 7, catalyst dosage of 250 mg/L, PMS dosage of 4 mM, the temperature of 25 °C, and reaction time of 15 min. Anion experiments emphasized that the presence of nitrate, carbonate, and phosphate in the solution reduced the degradation efficiency by producing reactive species with low oxidation potential. The RB5 degradation rate evolved with temperature, and the activation energy was obtained to be 44.48 kJ/mol. The mechanism of PMS activation and production of free radicals was proposed based on tert-butyl alcohol (TBA), ethanol (EtOH), and potassium iodide (KI) scavengers. Trapping experiments showed that both sulfate (SO₄^•-) and hydroxyl (^•OH) radicals are involved in the catalytic degradation of RB5. The effective treatment of real wastewater and tap water by the MWCNTs-CuNiFe₂O₄/PMS system requires a long reaction time. Gas chromatography-mass spectrometry (GC-MS) analysis indicated that RB5 can be degraded via methylation, decarboxylation, hydroxylation, and ring/chain cleavage pathways. The stable catalytic activity after three consecutive cycles suggested that MWCNTs-CuFe₂O₄ is a novel reusability catalyst in PMS activation.

Fabrication, functionalization and advanced applications of magnetic hollow materials in confined catalysis and environmental remediation

Magnetic hollow-structured functional hybrid materials with unique architectures and preeminent properties have always been an area of extensive research. They represent a subtle collaboration of hollow architecture, mesoporous nanostructure and magnetic character. Owing to the merits of a large void space, low density, high specific surface area, well-defined active sites and facile magnetic recovery, these materials present promising application projections in numerous fields, such as drug delivery, adsorption, storage, catalysis and many others. In this review, recent progress in the design, synthesis, functionalization and applications of magnetic hollow-meso/nanostructured materials are discussed. The first part of the review has been dedicated to the preparation and functionalization of the materials. The synthetic protocols have been broadly classified into template-assisted and template-free methods and major trends in their synthesis have been elaborated in detail. Furthermore, the benefits and drawbacks of each method are compared. The later part summarizes the application aspects of confined catalysis in organic transformations and environmental remediation such as degradation of organic pollutants, dyes and antibiotics and adsorption of heavy metal ions. Finally, an outlook of future directions in this research field is highlighted.

Highly sensitive non-enzymatic electrochemical glucose sensor based on dumbbell-shaped double-shelled hollow nanoporous CuO/ZnO microstructures

A high-performance non-enzymatic glucose sensor based on hybrid metal-oxides is proposed. Dumbbell-shaped double-shelled hollow nanoporous CuO/ZnO microstructures (CuO/ZnO-DSDSHNM) were prepared via the hydrothermal method using pluronic F-127 as a surfactant. This structure is studied by various physicochemical characterizations such as scanning electron microscopy, X-ray diffraction spectroscopy, inductively coupled plasma atomic emission spectroscopy, elemental mapping techniques, X-ray photoelectron spectroscopy, and transmission electron microscopy. This unique CuO/ZnO-DSDSHNM provides both a large surface area and an easy penetrable structure facilitating improved electrochemical reactivity toward glucose oxidation. The prepared CuO/ZnO-DSDSHNM was used over the glassy carbon electrode (GCE) as the active material for glucose detection and then coated by Nafion to provide the proposed Nafion/CuO/ZnO-DSDSHNM/GCE. The fabricated glucose sensor exhibits an extremely wide dynamic range from 500 nM to 100 mM, a sensitivity of 1536.80 µA mM^-1 cm^-2, a low limit of detection of 357.5 nM, and a short response time of 1.60 s. The proposed sensor also showed long-term stability, good reproducibility, favorable repeatability, excellent selectivity, and satisfactory applicability for glucose detection in human serum samples. The achieved high-performance glucose sensing based on Nafion/CuO/ZnO-DSDSHNM/GCE shows that both the material synthesis and the sensor fabrication methods have been promising and they can be used in future researches.

A New ternary organometallic Pd(ii)/Fe(iii)/Ru(iii) self-assembly monolayer: the essential ensemble synergistic for improving catalytic activity

The synergistic catalytic effect in a hetero-trimetallic catalytic monolayer is one of the intriguing topics because the additive effects of the second or third component play an important role in improving the activity. In this paper, a new Schiff-base organometallic nanosheet containing Pd/Fe/Ru immobilized on graphene oxide (GO@H-Pd/Fe/Ru) was prepared and characterized. The catalytic performance of GO@H-Pd/Fe/Ru and synergistic effect were systematically investigated. GO@H-Pd/Fe/Ru was found to be an efficient catalyst with higher turnover frequency (TOF) (26 892 h-1) and stability with recyclability of at least 10 times in the Suzuki-Miyaura coupling reaction. The deactivation mechanism was caused by the aggregation of the active species, loss of the active species, the changes of the organometallic complex, and active sites covered by adsorbed elements during the catalytic process. GO@H-Pd/Fe/Ru was a heterogeneous catalyst, as confirmed by kinetic studies with in situ FT-IR, thermal filtration tests and poisoning tests. The real active center containing Pd, Ru and Fe arranged as Fe(iii)-Ru(iii)-Pd(ii)-Fe(iii) was proposed. Although Ru(iii) and Fe(iii) were shown to be less active or inactive, the addition of Fe and Ru could effectively improve the entire activity by their ''indirect'' function, in which Fe or Ru made Pd more negative and more stable. The ensemble synergistic effect between metals, the ligand and support was described as a process in which the electron was transferred from GOvia ligand to Ru, and then to Pd or from Fe to Pd to make Pd more negative, promoting the oxidation addition with aryl halide. Also, the vicinity of Ru around Pd as the promoter adsorbed aryl boronic acid, which facilitates its synergism to react with the oxidation intermediate to the trans-metallic intermediate.

A magnetic palladium nickel carbon nanocomposite as a heterogeneous catalyst for the synthesis of distyrylbenzene and biphenyl derivatives

Distyrylbenzene and 9,10-distyrylanthracene derivatives were synthesized using an Fe₃O₄@Pd@Ni/C nanocomposite as a recyclable catalyst. The catalyst was recycled up to eight times.

Imidazolium-based ionic liquid immobilized on functionalized magnetic hydrotalcite (Fe3O4/HT-IM): as an efficient heterogeneous magnetic nanocatalyst for chemical fixation of carbon dioxide under green conditions

Fe₃O₄/HT-IM with plate-like morphology was synthesized as a novel and highly effective magnetic nanocatalyst and applied in chemical fixation.

Silica–sulfuric acid and alumina–sulfuric acid: versatile supported Brønsted acid catalysts

–SO3H functionalized silica and alumina have emerged as efficient and eco-compatible heterogeneous solid acid catalysts for the construction of various important molecular skeletons.

Suzuki–Miyaura cross coupling reaction: recent advancements in catalysis and organic synthesis

Suzuki–Miyaura cross coupling reaction (SMCR) – A milestone in the synthesis of C–C coupled compounds.

A facile green synthesis of MgCoFe2O4 nanomaterials with robust catalytic performance in the synthesis of pyrano[2,3-d]pyrimidinedione and their bis-derivatives

In this study, an efficient, rapid and simple plant-mediated green sol-gel auto-combustion procedure was presented to synthesis magnesium-cobalt ferrite (MgCoFe₂O₄) nanocatalyst using an aqueous extract of apple skins as a chelating/combustion agent. The catalyst was assessed by multiple techniques, including FT-IR, XRD, FE-SEM, EDS, elemental mapping, TGA-DTA and VSM. Then, the catalytic potential of the as-prepared MgCoFe₂O₄ nanocatalyst was examined in the three-component condensation reaction of 1,3-dimethyl barbituric acid, aldehydes and malononitrile for the one-pot synthesis of pyrano[2,3-d]pyrimidinedione and their bis-derivatives. The obtained results indicated the excellent catalytic activity of the MgCoFe₂O₄ in the three-component reaction. The high catalytic activity of these nanomaterials could be attributed to the synergistic electronic effect between nanoparticles, which showcased the enormous potential of multi-metallic nanomaterials in the catalysis field. More importantly, MgCoFe₂O₄ showed excellent magnetic properties, and it could be successfully separated and recovered by applying an external magnetic for further reuses. To the best of our knowledge, green synthesis of MgCoFe₂O₄ mediated by aqueous plant extract was reported here for the first time, and this work, therefore, can open up a new insight in the course of design, green synthesis and application of excellent green nanocatalyst for the sustainable processes. MgCoFe₂O₄ as a magnetically recyclable heterogeneous catalyst, has been synthesized through plant-mediated procedure using an aqueous extract of apple skins.

Design, preparation and characterization of aerogel NiO–CuO–CoO/SiO2 nanocomposite as a reusable catalyst for C–N cross-coupling reaction

The aerogel nanocomposite produces using the sol–gel and supercritical drying method processes. The CO₂ supercritical drying (SCD) was taken as the most powerful process, ensuring the best properties of the product.

Copper nanoparticles supported on charcoal mediated one-pot three-component synthesis of N-substituted-2H-indazoles via consecutive condensation C–N and N–N bond formation

An efficient and straightforward protocol for direct synthesis of 2H-indazoles is achieved from consecutive condensation of 2-halobenzaldehydes, primary amines, and sodium azide catalyzed by heterogeneous copper nanoparticles on charcoal (Cu/C) is achieved. The recoverable heterogeneous copper nanoparticles on charcoal (Cu/C) catalyst exhibited an impressive activity for the title reaction without any additives (expensive ligands, etc.). A series of structurally diverse 2H-indazoles were prepared in good to excellent yields from easily accessible starting materials by employing this protocol.

Hollow multi-shelled structures for energy conversion and storage applications

Materials with hollow multi-shelled structures composed of various compositions are promising candidates for energy conversion and storage applications.

Synthesis, characterization and first application of covalently immobilized nickel-porphyrin on graphene oxide for Suzuki cross-coupling reaction

In this study, nickel(ii)-coordinated 5,10,15,20-tetrakis(aminophenyl)porphyrin (NiTAPP) as a macrocyclic complex was covalently grafted to the edge of graphene oxide (GO) and applied as nanocatalyst in Suzuki cross-coupling reaction.