Visible-light-mediated high-efficiency catalytic oxidation of sulfides using wrinkled C3N4 nanosheets

Heterogenization of Homogeneous Donor-Acceptor Conjugated Polymers for Efficient Photooxidation: An Approach Toward Sustainable and Recyclable Photocatalysis

Recovery of homogeneous photocatalysts from reaction mixture is challenging, affecting the cost-effectiveness, and masks their advantages, including 4-8 fold higher catalytic activity than corresponding heterogeneous counterparts. Incorporation of long alkyl chains within the rigid π-conjugated backbone of conjugated polymers can augment their solubility in particular organic solvents; accordingly, they can function as homogeneous photocatalysts. Consequently, these polymers facilitate the recovery of catalysts through the reverse dissolution process, thus creating a well-suited platform to meet certain advantages of both homo- and heterogeneous photocatalysts. This work exemplifies the unprecedented perks of donor-acceptor conjugated polymers from benzodithiophene and substituted dibenzothiophene sulfone moieties for their homogeneous phase photoredox activities along with their heterogeneous recovery and reuse up to five runs. The potential intermediate singlet oxygen (1O2) and superoxide (O2•-) as reactive oxygen species generated by these photostable conjugated polymers efficiently catalyze the visible-light-driven oxidation of aryl sulfides (up to 92% yield) and oxidative hydroxylation of phenylboronic acids (up to 93% yield), respectively. Therefore, to actualize the heightened catalytic performance and formulate a design strategy for polymeric photoredox catalyst, our work introduces an alternative approach to the advancement of photocatalysis with diverse catalytic activities.

Self-assembled B-doped flower-like graphitic carbon nitride with high specific surface area for enhanced photocatalytic performance

Graphitic carbon nitride (g-C3N4) is a promising nonmetallic photocatalyst. In this manuscript, B-doped 3D flower-like g-C3N4 mesoporous nanospheres (BMNS) were successfully prepared by self-assembly method. The doping of B element promotes the internal growth of hollow flower-like g-C3N4 without changing the surface roughness structure, resulting in a porous floc structure, which enhances the light absorption and light reflection ability, thereby improving the light utilization rate. In addition, B element provides lower band gap, which stimulates the carrier movement and increases the activity of photogenerated carriers. The photocatalytic mechanism and process of BMNS were investigated in depth by structural characterization and performance testing. BMNS-10 % shows good degradation for four different pollutants, among which the degradation effect on Rhodamine B (RhB) reaches 97 % in 30 min. The apparent rate constant of RhB degradation by BMNS-10 % is 0.125 min-1, which is 46 times faster compared to bulk g-C3N4 (BCN). And the photocatalyst also exhibits excellent H2O2 production rate under visible light. Under λ > 420 nm, the H2O2 yield of BMNS-10 % (779.9 μM) in 1 h is 15.9 times higher than that of BCN (48.98 μM). Finally, the photocatalytic mechanism is proposed from the results of free radical trapping experiments.

A Green Environmental Protection Photocatalytic Molecular Reactor for Aerobic Oxidation of Sulfide to Sulfoxide

The design and synthesis of metal-organic frameworks (MOFs) as photocatalytic molecular reactors for varied reactions have drawn great attention. In this work, we designed a novel photoactive perylenediimides-based (PDI) carboxylate ligand N,N'-di(3',3",5',5"-tetrakis(4-carboxyphenyl))-1,2,6,7-tetrachloroperylene-3,4,9,10-tetracarboxylic acid diimide (Cl-PDI-TA) and use it to successfully synthesize a novel Zr(IV)-based MOF 1 constructed from [Zr6 O8 (H2 O)8 ]8+ clusters bridged by Cl-PDI-TA ligands. Structural analysis revealed that Zr-MOF 1 manifests a 3D framework with (4,8)-connected csq topology and possesses triangular channels of ~17 Å and mesoporous hexagonal channels of ~26 Å along c-axis. Moreover, the synthesized Zr-MOF 1 exhibits visible-light absorption and efficient photoinduced free radical generation property, making it a promising photocatalytic molecular reactor. When Zr-MOF 1 was used as a photocatalyst for the aerobic oxidation of sulfides under irradiation of visible light, it could afford the corresponding sulfoxides with high yield and selectivity. Experimental results demonstrated that the substrate sulfides could be fixed in the pores of 1 and directly transformed to the products sulfoxides in the solid state. Furthermore, the mechanism for the photocatalytic transformation was also investigated and the results revealed that the singlet oxygen (1 O2 ) and superoxide radical (O2 ⋅- ) generated by the energy transfer and electron transfer from the photoexcited Zr-MOF to oxidants were the main active species for the catalytic reactions. This work offers a perceptive comprehension of the mechanism in PDI-based MOFs for further study on photocatalytic reactions.

Metal-Free Activation of Molecular Oxygen by 9-Fluorenone-Based Porous Organic Polymers for Selective Aerobic Oxidation

Oxygen activation is a critical step in heterogeneous oxidative processes, particularly in catalytic, electrolytic, and pharmaceutical applications. Among the various catalysts available for photocatalytic O2 activation, homogeneous aryl ketones are at the forefront. To avoid the degradation and deactivation of aryl ketones, 9-fluorenone-based porous organic polymers were designed and regulated by doping them with co-monomers. The obtained heterogeneous photocatalyst showed good performance in O2 activation, and its performance was better than that of homogeneous 9-fluorenone. The obtained heterogeneous photocatalyst showed good reusability. We believe that the presented method and findings represent an important step toward designing catalysts tailored for specific tasks.

Environment Friendly g-C3N4-Based Catalysts and Their Recent Strategy in Organic Transformations

Organic molecules synthesized in an environmentally friendly manner have excellent therapeutic potential. The entire preparation technique was examined in the existence of a light source, implying that light has been replaced by heating and the usage of dangerous chemicals has decreased, resulting in less pollution of the environment. The advantages of these nanocarbon catalysts include high efficiency, environmentally friendly synthesis, eco-friendly, inexpensive, and non-corrodible. In organic transformations, solid metal base/metal-free catalysts produce better results. Here, the metal-free semiconductor g-C₃N₄ was used to demonstrate the catalytic behavior of organic conversions. g-C₃N₄ is a two-dimensional material and a p‑type semiconductor to enhance the photocatalytic activity. The excellent properties of g-C₃N₄ sheet lead to the support of metals to form metal-organic frameworks. Most of the reactions gained positive response under visible light irradiation. This review will inspire readers in widen the applications of g-C₃N₄ based catalyst in various organic transformation reactions.

Acetylene/Vinylene-Bridged π-Conjugated Covalent Triazine Polymers for Photocatalytic Aerobic Oxidation Reactions under Visible Light Irradiation

Solar-driven photocatalytic chemical transformation provides a sustainable strategy to produce valuable feedstock, but designing photocatalysts with high efficiency remains challenging. Herein, two acetylene- or vinylene-bridged π-conjugated covalent triazine polymers, A-CTP-DPA and V-CTP-DPE, were successfully fabricated toward metal-free photocatalytic oxidation under visible light irradiation. Compared to the one without acetylene or vinylene bridge, both resulting polymers exhibited superior activity in photocatalytic selective oxidation of sulfides and oxidative coupling of amines; in particular, A-CTP-DPA delivered an optimal photocatalytic performance. The superior activity was attributed to the broadened spectral response range, effective separation, rapid transportation of photogenerated charge carriers, and abundant active sites for photogenerated electrons due to the existence of the acetylene bridge in the framework. This work highlights the potential of acetylene and vinylene bridges in tuning catalytic efficiency of organic semiconductors, providing a guideline for the design of efficient photocatalysts.

Aerobic Photocatalysis: Oxidation of Sulfides to Sulfoxides

Sulfoxides constitute one of the most important functional groups in organic chemistry found in numerous pharmaceuticals and natural products. Sulfoxides are usually obtained from the oxidation of the corresponding sulfides. Among various oxidants, oxygen or air are considered the greenest and most sustainable reagent. Photochemistry and photocatalysis is increasingly applied in new, as well as traditional, yet demanding, reaction, like the aerobic oxidation of sulfides to sulfoxides, since photocatalysis has provided the means to access them in mild and effective ways. In this review, we will summarize the photochemical protocols that have been developed for the oxidation of sulfides to sulfoxides, employing air or oxygen as the oxidant. The aim of this review is to present: i) a historical overview, ii) the key mechanistic studies and proposed mechanisms and iii) categorize the different catalytic systems in literature.

Selective and efficient catalytic and photocatalytic oxidation of diphenyl sulphide to sulfoxide and sulfone: the role of hydrogen peroxide and TiO2 polymorph

In this paper, we describe the role of anatase and rutile crystal phases on diphenyl sulphide (Ph2S) catalytic and photocatalytic oxidation. The highly selective and efficient synthesis of diphenyl sulfoxide (Ph2SO) and diphenyl sulfone (Ph2SO2) at titanium dioxide was demonstrated. Ph2S oxidation in the presence of hydrogen peroxide at anatase-TiO2 can take place both as a catalytic and photocatalytic reaction, while at rutile-TiO2 only photocatalytic oxidation is possible. The reaction at anatase leads mainly to Ph2SO2, whereas, in the presence of rutile a complete conversion to Ph2SO is achieved after only 15 min (nearly 100% selectivity). Studies on the mechanistic details revealed a dual role of H2O2. It acts as a substrate in the reaction catalysed only by anatase, but it also plays a key role in alternative photocatalytic oxidation pathways. The presented study shows the applicability of photocatalysis in efficient and selective sulfoxide and sulfone production.

Constructing three-dimensional network C, O Co-doped nitrogen-deficient carbon nitride regulated by acrylic fluoroboron overall marine antifouling

To deal with unwanted biofouling adsorption, which impacts the economy and the environment, significant research has been devoted to composite systems involving a photocatalyst combined with self-renewal resin to provide synergistic antifouling. Here, photocatalyst based on three-dimensional (3D) network of carbon-oxygen-doped nitrogen-deficient carbon nitride and acrylic fluoroboron polymer as a system was successfully synthesized. 3D networks carbon nitride with carbon-oxygen dopants and nitrogen defects were prepared as skeletons, which effectively support and regulate the hydrolysis rate of the polymer. These composite systems exhibits excellent diatom anti-adhesion performance and high antibacterial rates for Escherichia coli and Staphylococcus aureus of up to 91.87% and 88.52%, respectively. In addition, self-cleaning function of the composite system are proved by and higher efficiency of chemical oxygen demand (COD) removal owing to efficient charge-carrier separation and transfer within the 3D network carbon nitride network. The great potential applications of this strategy demonstrated in marine engineering in the future.

Catalytic wet peroxide oxidation degradation of magenta wastewater and preparation of FeOCl/montmorillonite

The iron oxychloride/pillared montmorillonite (FeOCl/MMT) catalyst was prepared by wet impregnation method and solid melting method. Various characterization techniques were used to analyze the microscopic morphology and structure of a series of catalysts. Moreover, the catalysts were used to treat magenta-simulated dye wastewater through catalytic wet peroxide oxidation (CWPO) degradation. The magenta removal rate and chemical oxygen demand (COD) removal rate of the magenta-simulated dye wastewater were used to evaluate the catalytic performance of the catalyst, and the optimal catalyst preparation conditions were selected. The results showed that the solid melting method was more favorable to the preparation of the catalyst, and the COD removal rate of wastewater can reach 70.8% when the FeOCl load was 3%. Moreover, 96.2% of the magenta in the solution was removed. The COD removal rate of the magenta wastewater decreased by only 12.4% after the catalyst was repeatedly used six times, indicating that the catalyst has good activity and stability. The Fermi equation can simulate the reaction process of the catalyst treating magenta wastewater at high temperature.

The synergistic effect of carbon nanotubes and graphitic carbon nitride on the enhanced supercapacitor performance of cobalt diselenide-based composites

Carbon nanotubes and g-C₃N₄ synergistically optimize the electrical conductivity and spatial structure of CoSe₂, thus improving the performance of supercapacitors.

Improving the photocatalytic activity of benzyl alcohol oxidation by Z-scheme SnS/g-C3N4

The formation of the Z-scheme heterojunction between SnS and g-C₃N₄ facilitates the separation of electrons and holes, thereby increasing the conversion of benzyl alcohol.

Recent Advances in Heterogeneous Photo-Driven Oxidation of Organic Molecules by Reactive Oxygen Species

The photo-driven oxidation of organic molecules into corresponding high-value-added products has become a promising method in chemical synthesis. This strategy can drive thermodynamically non-spontaneous reactions and achieve challenging thermocatalytic processes under ambient conditions. Reactive oxygen species (ROS) are not only significant intermediates for producing target products via photoinduced oxidation reactions but also contribute to the creation of sustainable chemical processes. Here, the latest advances in heterogeneous photo-driven oxidation reactions involving ROS are summarized. The major types of ROS and their generation are introduced, and the behaviors of various ROS involved in photo-driven processes are reviewed in terms of the formation of different bonds. Emphasis is placed on unraveling the reaction mechanisms of ROS and establishing strategies for their regulation, and the remaining challenges and perspectives are summarized and analyzed. This Review is expected to provide an in-depth understanding of the mechanisms of ROS involved in photo-driven oxidation processes as an important foundation for the design of efficient catalysts. Clarifying the role of ROS in oxidation reactions has important scientific significance for improving the atomic and energy efficiency of reactions in practical applications.