Metal-organic framework-derived M (M = Fe, Ni, Zn and Mo) doped Co9S8 nanoarrays as efficient electrocatalyst for water splitting: The combination of theoretical calculation and experiment

Heterostructure Fe7S8/Mn(OH)2 of incomplete sulfurization induces Mn atoms with high density of states for enhancing oxygen evolution reaction and supercapacitor electrochemical performance

Heterostructures and the introduction of heterogeneous elements have been regarded as effective strategies to promote electrochemical performance. Herein, sulfur species are introduced by a simple hydrothermal vulcanization method, which constructs the open heterostructure Fe7S8/Mn(OH)2 as a bifunctional material. The open cordyceps-like morphology can make the material contact more sufficiently with the electrolyte, exposing a large number of reaction sites. Furthermore, the introduction of the heterogeneous element S successfully constructs a heterogeneous interface, the interface-modulated composite material consists of Mn atoms contributing the main density of states (DOS) near the Fermi energy level from the density functional theory (DFT) calculations, which optimizes the adsorption energy of oxygen-containing intermediates during the oxygen evolution reaction (OER) process and reduces the reaction energy barrier, being conducive to the improvement of the material's electrochemical properties. As predicted, the Fe7S8/Mn(OH)2 material exhibits remarkable electrochemical properties, such as an overpotential of 202 mV at 10 mA cm-2 for the oxygen evolution reaction and even a specific capacitance of 2198 F g-1 at 1 A g-1. This work provides new insights into the role of introducing sulfur species and controlling the structure of the material, and exemplifies novel design ideas for developing bifunctional materials for energy storage and conversion.

Controllable construction of ZIF-derived Co9S8 hollow polyporous polyhedrons with Ru-doping for enhanced hydrogen evolution reaction

Ru-doped Co9S8 hollow porous polyhedrons (Ru-Co9S8 HPPs) derived from zeolitic-imidazolate-frameworks were synthesized through hydrothermal coprecipitation and thermal decomposition methods. The results indicate that Ru-Co9S8-500 HPPs possess a strong Ru-Co synergistic effect, large electrochemical surface area, and sufficient active sites, endowing them with excellent hydrogen evolution reaction performance.

Ruthenium-doped cobalt sulphide electrocatalyst derived from a ruthenium-cobalt Prussian blue analogue (RuCo-PBA) for an enhanced hydrogen evolution reaction (HER)

The designing of efficient electrocatalysts for hydrogen generation is essential for the practical application of water-splitting devices. With numerous electrochemical advantages, transition metal sulphides are regarded as the most promising candidates for catalysing the hydrogen evolution reaction (HER) in acidic media. In the present study, Ru-doped cobalt sulphide nanosheets, termed Co9S8/Ru@t (t = 24 h, 48 h, and 72 h), were obtained by varying the reaction time from 24 h to 72 h from a RuCo-PBA precursor. The role of the time period for the synthesis of Co9S8/Ru@48h is vital in increasing the number of electroactive sites and optimising the hydrogen adsorption-desorption phenomena leading to an increment in the HER activity. The electrochemical outcomes demonstrate that the optimized Co9S8/Ru@48h requires a low overpotential of just 94 mV to produce 10 mA cm-2 current density, and also exhibits a lower Tafel slope value of 84 mV dec-1 defining its faster reaction kinetics. The as-synthesized Co9S8/Ru@48h was stable for up to 20 h of constant electrolysis signifying its outstanding durability. The optimized synthetic approach and impressive electrochemical results make Co9S8/Ru@48h a suitable alternative to noble-metal-based electrocatalysts for the HER.

Noble Metal Phosphides Supported on CoNi Metaphosphate for Efficient Overall Water Splitting

Transition metal metaphosphates and noble metal phosphides prepared under similar conditions are potential hybrid catalysts for electrocatalytic water splitting, which is of great significance for H2 production. Herein, the structure and electrocatalytic activity of different noble metal species (i.e., Rh, Pd, Ir) on CoNiP4O12 nanoarrays have been systematically studied. Due to the different formation energies of noble metal phosphides, the phosphides of Rh (RhPx) and Pd (PdPx) as well as the noble metal Ir are obtained under the same phosphorylation conditions perspectively. RhPx/CoNiP4O12 and PdPx/CoNiP4O12 exhibit much better HER activity than Ir/CoNiP4O12 due to the advantages of phosphides. Density functional theory (DFT) calculations reveal that the extraordinary activity of RhPx/CoNiP4O12 originated from the strong affinity to H2O and optimal adsorption for H*. The best RhPx/CoNiP4O12 only requires a low overpotential of 30 and 234 mV to deliver 10 mA cm-2 for HER and OER, respectively, and therefore is effective for overall water splitting (requiring 1.57 V to achieve a current density of 10 mA cm-2). This work not only develops a novel RhPx/CoNiP4O12 electrocatalyst for overall water splitting but also provides deep insight into the formation mechanism of noble metal phosphides.

Activating doped graphene surface by cobalt-rich sulfide encapsulation toward oxygen reduction electrocatalysis

Similar to proton exchange membrane fuel cell, anion-exchange membrane fuel cell is also a significant energy conversion device for achieving the utilization of clean hydrogen energy. However, the cathodic alkaline oxygen reduction reaction (ORR) is kinetically not favored and usually requires platinum-group metal (PGM) catalysts such as Pt/C to reduce the overpotential. The major challenge in using PGM-free catalysts for ORR is their low efficiency and poor stability, which urgently demands new concepts and strategies to address this issue. Herein, we controllably manufactured a N, S-co doped graphene encapsulating uniform cobalt-rich sulfides (Co8FeS8@NSG) by a universal synthesis strategy. After encapsulation, electron transfer from the encapsulated cobalt-rich sulfides to the doped graphene was greatly promoted, which effectively optimizes the electronic structure of the doped graphene, thereby enhancing the ORR activity of the doped graphene surface. Consequently, the Co8FeS8@NSG exhibits enhanced ORR activity with a higher half-wave potential of 0.868 V (versus reversible hydrogen electrode, vs. RHE) when compared with pure NSG (0.765 V vs. RHE). Density functional theory calculations further confirm that the construction of interface for NSG encapsulating cobalt-rich sulfides could conspicuously elevate the ORR activity through slightly positively-charged C active site and thus simultaneously enhancing electronic conductivity.

Nitrogen-Doped Carbon Dots Modified Fe-Co Sulfide Nanosheets as High-Efficiency Electrocatalysts toward Oxygen Evolution Reaction

Developing high-efficiency and stable oxygen evolution reaction (OER) electrocatalysts is an imperative requirement to produce green and clean hydrogen energy. In this work, the FeCoSy /NCDs composite with nitrogen-doped carbon dots (NCDs) modified Fe-Co sulfide (FeCoSy ) nanosheets is prepared by using a facile and mild one-pot solvothermal method. Benefiting from the low crystallinity and the synergistic effect between FeCoSy and NCDs, the optimal FeCoSy /NCDs-3 composite exhibits an overpotential of only 284 mV at 10 mA cm-2 , a small Tafel value of 52.1 mV dec-1 , and excellent electrochemical durability in alkaline solution. Remarkably, unlike ordinary metal sulfide electrocatalysts, the morphology, components, and structure of the FeCoSy /NCDs composite can be well retained after OER test. The NCDs modified FeCoSy composite with excellent electrocatalytic performance provides an effective approach to boost metal sulfide electrocatalysts for practical application.

Sulfur Vacancy-Engineered Co3S4/MoS2-Interfaced Nanosheet Array for Enhanced Alkaline Overall Water Splitting

Electrochemical water splitting, a crucial reaction for renewable energy storage, demands highly efficient and stable catalysts. Defect and interface engineering has been widely acknowledged to play a pivotal role in improving electrocatalytic performance. Herein, we demonstrate a facile strategy to construct sulfur vacancy (Sv)-engineered Co3S4/MoS2-interfaced nanosheet arrays to modulate the interface electronic structure in situ reduction with NaBH4. The abundant sulfur vacancies and well-arranged nanosheet arrays in Sv-Co3S4/MoS2 lead to pronounced electrocatalytic properties for hydrogen and oxygen evolution reactions (HER/OER) in an alkaline medium, with observed overpotentials of 156 and 209 mV at 10 mA cm-2, respectively. Additionally, as a bifunctional electrocatalyst, Sv-Co3S4/MoS2 requires a cell voltage of 1.67 V at 10 mA cm-2 for overall water splitting and exhibits long-term stability with activity sustained for more than 20 h. This study provides a novel approach to producing transition metal compound-interfaced electrocatalysts with rich vacancies under mild conditions, showcasing their potential for efficient water splitting applications.

Ni-Doped BiVO4 photoanode for efficient photoelectrochemical water splitting

BiVO₄ (BVO) based photoanode is one of the most mega-potential materials for solar water splitting while suffers from poor charge transfer and separation efficiency limit its practical application. Herein, FeOOH/Ni-BiVO₄ photoanode synthesized by the facile wet chemical method were investigated for improved charge transport and separation efficiency. The photoelectrochemical (PEC) measurements demonstrate that the water oxidation photocurrent density can reach as high as 3.02 mA cm^-2 at 1.23 V vs RHE, and the surface separation efficiency can be boosted to 73.3 %, which increases around 4 times comparing with that of pure sample. Further depth studies showed that the Ni doping can effectively promote hole transport/trapping and introduce more active sites for the oxidation of water, while FeOOH co-catalyst could passivate the Ni-BiVO₄ photoanode surface. This work provides a model for the design of BiVO₄-based photoanodes with combined thermodynamic and kinetic advantages.

Self-Supporting Metal-Organic Framework-Based Nanoarrays for Electrocatalysis

The replacement of powdery catalysts with self-supporting alternatives for catalyzing various electrochemical reactions is extremely important for the large-scale commercial application of renewable energy storage and conversion technologies. Metal-organic framework (MOF)-based nanoarrays possess tunable compositions, well-defined structure, abundant active sites, effective mass and electron transport, etc., which enable them to exhibit superior electrocatalytic performance in multiple electrochemical reactions. This review presents the latest research progress in developing MOF-based nanoarrays for electrocatalysis. We first highlight the structural features and electrocatalytic advantages of MOF-based nanoarrays, followed by a detailed summary of the design and synthesis strategies of MOF-based nanoarrays, and then describe the recent progress of their application in various electrocatalytic reactions. Finally, the challenges and perspectives are discussed, where further exploration into MOF-based nanoarrays will facilitate the development of electrochemical energy conversion technologies.

Highly efficient OER catalyst enabled by in situ generated manganese spinel on polyaniline with strong coordination

The oxygen evolution reaction (OER), as the rate-determining step of electrochemical water splitting, is extremely crucial, and thus it is a requisite to engineer feasible and effective electrocatalysts to shrink the reaction energy barrier and accelerate the reaction. Herein, monodisperse Mn₃O₄ nanoparticles on a PANI substrate were synthesized by polymerization and in situ oxidation. Combining Mn₃O₄ nanoparticles and PANI fibers can not only maximize the strong coupling effect and synergistic effect but also construct a well-defined three-dimensional structure with extensive exposed active sites, where the permeation and adherence of the electrolyte are made exceedingly feasible, thus displaying excellent OER activity. Benefiting from the outstanding structural stability, the resulting Mn₃O₄/PANI/NF is able to deliver a low overpotential of 262 mV at a current density of 10 mA cm^-2, which outperforms the commercial RuO₂ catalyst (275 mV) as well as presently reported representative Mn-based and PANI-based electrocatalysts and state-of-the-art OER electrocatalysts. The synthetic method for Mn₃O₄/PANI not only provides a brand-new avenue for the rational design of inorganic material/conductive polymer composites but also broadens the understanding of the mechanism of Mn-based catalysts for highly enhanced OER.

In situ preparation of a Co4S3-based electrocatalyst by taking advantage of the controllable components of metal-organic frameworks

In order to give full play to the advantages in structure tailoring and quantitative assembly, metal-organic frameworks (MOFs) with different topological structures formed by the self-assembly of inorganic ligands containing sulfur, cobalt ions and large-size ligands were used to prepare electrocatalyst materials for hydrolysis with controllable composition and performance. According to the synthesis proposition, we can not only avoid using additional doped sulfur sources to reduce waste but also make it very convenient for Co and sulfur elements to be uniformly and controllably distributed in the whole material, and enhance the overall synergistic effects. Based on the above considerations, two-dimensional layered and three-dimensional MOFs, Co-MOF-1, and Co-MOF-2, with the same chemical compositions were utilized as the templates, and a series of Co/S-based materials with variable compositions and properties were obtained only by controlling the pyrolysis temperature. For each MOF series, it can be observed that with the increase in the pyrolysis temperature, the derivatives gradually change from Co₄S₃ to Co₉S₈ composites, which could be proven by PXRD studies. The electrocatalytic properties of two series of derivatives were also investigated, and the results indicate that the materials containing Co₄S₃ can indeed show better water-splitting performance than Co₉S₈ ones. Furthermore, the macroscopic stacking form of the MOF template also plays an important role in determining the electrocatalytic performance of the derived materials. Through an overall comparison, it is found that the electrocatalytic performance of the Co-MOF-1 series is better than that of the Co-MOF-2 series at various temperatures, which should be only caused by the natural packing modes of the pristine MOF template. For Co-MOF-1 derivatives, the retention of the two-dimensional layered structure is favorable to form an electrostatic charge separation layer and electron transport channel, which is beneficial to the intercalation and delamination of hydroxide ions, thus improving the storage capacity of materials, promoting electron transfer, and producing less electron transfer resistance. Therefore, based on the research results, the reasonable design of layered MOF materials containing the specific sulfur-containing linker as water-splitting catalysts is an applicable route for the preparation of economical, environmentally friendly, and low energy consumption electrocatalysts, which should receive increasing attention in the future.

Hollow Capsule NiCo2 NS Prepared by Self-Sacrificing Template Method for High-Efficiency Bifunctional Catalyst and Its Application in Zn-Air Battery

Exploring the application of high-efficiency bifunctional oxygen catalysts to rechargeable zinc-air batteries has been a research hotspot in recent years. We succeeded in obtaining NiCo₂ NS with a hollow capsule structure through the self-sacrificing template method, which has a larger specific surface area and can provide more active sites for electrocatalysis relative to his solid. The introduction of S can change the valence distribution of N and the electronic structure of the M-N bond, so that NiCo₂ NS exhibits excellent performance in the overpotential and stability of the oxygen reduction and oxygen evolution reactions. It shows an overpotential of 154 mV at 10 mA cm^-2 and a half-wave potential of 0.76 V. When used as a bi-functional catalyst in zinc-air batteries, it exhibits good stability within 400 h. The flexible battery assembled by NiCo₂ NS also shows excellent performance, and can be cycled stably for 20 h. The current maintains good stability when it is bent at different angles during the cycle.

Metal-Organic Framework-Derived Hollow CoSx Nanoarray Coupled with NiFe Layered Double Hydroxides as Efficient Bifunctional Electrocatalyst for Overall Water Splitting

For effective hydrogen production by water splitting, it is essential to develop earth-abundant, highly efficient, and durable electrocatalysts. Herein, the authors report a bifunctional electrocatalyst composed of hollow CoS_x and Ni-Fe based layered double hydroxide (NiFe LDH) nanosheets for efficient overall water splitting (OWS). The optimized heterostructure is obtained by the electrodeposition of NiFe LDH nanosheets on metal-organic framework-derived hollow CoS_x nanoarrays, which are supported on nickel foam (H-CoS_x @NiFe LDH/NF). The unique structure of the hybrid material not only provides ample active sites, but also facilitates electrolyte penetration and gas release during the reactions. Additionally, the strong coupling and synergy between the hydrogen evolution reaction (HER) active CoS_x and the oxygen evolution reaction (OER) active NiFe LDH gives rise to the excellent bifunctional properties. Consequently, H-CoS_x @NiFe LDH/NF exhibits remarkable HER and OER activities with overpotentials of 95 and 250 mV, respectively at 10 mA cm^-2 in 1.0 M KOH. Even at 1.0 A cm^-2 , the electrode requires small overpotentials of 375 mV (for HER) and 418 mV (for OER), respectively. An electrolyzer based on H-CoS_x @NiFe LDH/NF demonstrates a low cell voltage of 1.98 V at a current density of 300 mA cm^-2 and good durability for 100 h in OWS application.

Fe doped NiS nanosheet arrays grown on carbon fiber paper for a highly efficient electrocatalytic oxygen evolution reaction

Developing efficient and low-cost non-noble metal catalysts for the oxygen evolution reaction (OER) is important for hydrogen production through water electrolysis. Herein, Fe doped NiS nanosheets directly grown on conductive carbon fiber paper (Fe-NiS@CFP) were fabricated through a two-step hydrothermal process. The microstructure, interface and electronic states of the prepared sample were modulated by Fe doping, exhibiting small internal and interface charge-transfer resistance. Benefiting from these factors, Fe-NiS@CFP shows superior electrocatalytic performance with an overpotential of 275 mV at 100 mA cm^-2 and maintains the activity for at least 50 h as a working electrode for the OER. This work may provide insights into the design and fabrication of non-noble metal sulfide electrocatalysts.

Fe and Cu dual-doped Ni3S4 nanoarrays with less low-valence Ni species for boosting water oxidation reaction

Transition metal materials with high efficiency and durable electrocatalytic water splitting activity have attracted widespread attention among scientists. In this work, two cation co-doped Ni₃S₄ nanoarrays grown on a Ni foam support were firstly synthesized through a typical two step hydrothermal process. Cu and Fe co-doping can regulate the internal electron configuration of the material, thus reducing the activation energy of the active species. Moreover, density functional theory calculations demonstrate that a low Ni²⁺ amount improves the adsorption energy of H₂O, which facilitates the formation and reaction of intermediate species in the water splitting process. The experimental results indicate that the Cu and Fe co-doped Ni₃S₄ material has superior electrochemical activity for water oxidation reaction to pure Ni₃S₄, Fe doped Ni₃S₄ and Cu doped Ni₃S₄. The Fe-Cu-Ni₃S₄ material displays a significantly enhanced electrocatalytic performance with low overpotentials of 230 mV at 50 mA cm^-2 and 260 mV at 100 mA cm^-2 for the oxygen evolution reaction under alkaline conditions. It's worth noting that when Fe-Cu-Ni₃S₄ was used as the anode and cathode, a small cell voltage of 1.59 V at 10 mA cm^-2 was obtained to achieve stable overall water splitting. Our work will afford a novel view and guidance for the preparation and application of efficient and environmentally friendly water splitting catalysts.

Effect of feed impurities on catalytic performance of CuFe2O4/β-SiC for SO3 decomposition in the sulfur–iodine cycle

CuFe2O4/β-SiC exhibits high activity and stability in the presence of feed impurities in SO3 decomposition reaction. A mathematical model is developed and validated to predict SO3 conversion at different feed compositions and temperatures.

Double MOF gradually activated S bond induced S defect rich MILN-based Co(z)-NiMoS for efficient electrocatalytic overall water splitting

Herein, cactus like nanorods with rich S defects and functional group MILN-based Co(z)-NiMoS are synthesized through a facile method. First, we prepared MIL-88B precursor to give a fairly dispersed frame structure, and then Coⁿ⁺ was doped into disulfides, which are rich in sulfur bonds, and the imidazole group was cleverly connected into graphitized carbon via self-etching of ZIF-67. The doping of Coⁿ⁺ and functional groups makes tiny changes in the sulfide lattice, which promotes the unsaturation degree of the S bond and activates it gradually. The prepared semi frame sulfide with a unique structure, on the one hand, ensures the hydrophilicity and multiple active specific surface area, which lays superior functions in morphology. On the other hand, coupling metals that have strong valence change ability and functional groups by active S bonds play an important role in the process of electrocatalytic reaction. Amazingly, disintegration and self-reconstruction of MILN-based Co(z)-NiMoS occurs during oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) due to the activation of the S bond, which provides a new perspective for the overall water splitting mechanism. The electrochemical results show that the MILN-based Co(z)-NiMoS electrocatalyst exhibits overpotentials of HER, OER, and overall water splitting (OWS) to be 169 mV, 170 mV, and 1.466 V, respectively, making it a promising electrode material for OWS applications.

Vanadium -mediated ultrafine Co/Co9S8 nanoparticles anchored on Co-N-doped porous carbon enable efficient hydrogen evolution and oxygen reduction reactions

Developing cost-effective, highly-active and robust electrocatalysts is of vital importance to supersede noble-metal ones for both hydrogen evolution reactions (HERs) and oxygen reduction reactions (ORRs). Herein, a unique vanadium-mediated space confined strategy is reported to construct a composite structure involving Co/Co₉S₈ nanoparticles anchored on Co-N-doped porous carbon (VCS@NC) as bifunctional electrocatalysts toward HER and ORR. Benefitting from the ultrafine nanostructure, abundant Co-N_x active sites, large specific surface area and defect-rich carbon framework, the resultant VCS@NC exhibits unexceptionable HER catalytic activity, needing extremely low HER overpotentials in pH-universal media (alkaline: 117 mV, acid: 178 mV, neutral: 210 mV) at a current density of 10 mA cm^-2, paralleling at least 100 h catalytic durability. Notably, the VCS@NC catalyst delivers high-efficiency ORR performance in alkaline solution, accompanied with a quite high half wave potential of 0.901 V, far overmatching the commercial Pt/C catalyst. Our research opens up novel insight into engineering highly-efficient multifunctional non-precious metal electrocatalysts by a metal-mediated space-confined strategy in energy storage and conversion system.

In Situ Formation of Surface-Induced Oxygen Vacancies in Co9S8/CoO/NC as a Bifunctional Electrocatalyst for Improved Oxygen and Hydrogen Evolution Reactions

Creating oxygen vacancies and introducing heterostructures are two widely used strategies in Co-based oxides for their efficient electrocatalytic performance, yet both strategies have rarely been used together to design a bifunctional electrocatalyst for an efficient overall water splitting. Herein, we propose a facile strategy to synthesize oxygen-defect-rich Co9S8/CoO hetero-nanoparticles with a nitrogen-doped carbon shell (ODR-Co9S8/CoO/NC) through the in situ conversion of heterojunction along with surface-induced oxygen vacancies, simply via annealing the precursor Co3S4/Co(OH)2/ZIF-67. The as-prepared ODR-Co9S8/CoO/NC shows excellent bifunctional catalytic activities, featuring a low overpotential of 217 mV at 10 mA cm-2 in the oxygen evolution reaction (OER) and 160 mV at 10 mA cm-2 in the hydrogen evolution reaction (HER). This performance excellency is attributed to unique heterostructure and oxygen defects in Co9S8/CoO nanoparticles, the current work is expected to offer new insights to the design of cost-effective, noble-metal-free electrocatalysts.

In-Situ Generated Trimetallic Molybdate Nanoflowers on Ni Foam Assisted with Microwave for Highly Enhanced Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is considered as a critical half-cell reaction of water splitting, the kinetics of which is sluggish even not favored, thus requiring highly active electrocatalysts to shrink the reaction energy barrier and improve the energy conversion efficiency. In this study, In-situ generated trimetallic molybdate nanoflowers on Ni foam by a straightforward and time-saving solvothermal method assisted with microwave, not only bring synergistic effect into full play between multiple metals, but also construct a well-defined nanoflower-like structure accompanied by larger specific area (273.3 m²  g^-1 ) and smaller size than the pristine NiMoO₄ . The resulting Ni_0.9 Al_0.1 MoO₄ -NF requires a relatively low overpotential of 266 mV for OER at 10 mA cm^-2 , which outperforms commercial RuO₂ catalysts (274 mV). Such excellent performance compares favorably to most previously reported NiMoO₄ -based electrocatalysts for OER. This work not only supplies a facile method to construct a well-defined nanoflower-like structure on foam, but also broadens our horizons into the mechanism of OER in alkaline conditions.

Rejuvenating the Geometric Electrocatalytic OER Performance of Crystalline Co3 O4 by Microstructure Engineering with Sulfate

Despite significant research on its electrocatalytic OER activity, the geometric performance of Co₃ O₄ has remained unsatisfactory compared to relatively amorphous Co-based materials. In particular, the activity of Co₃ O₄ prepared through annealing always gets inferior compared to its amorphous precursor. This demands the development of synthetic techniques to prepare Co₃ O₄ with superior activity as the unpredictable crystal structure of the amorphous materials makes it difficult to understand their structure-activity relationships despite higher geometric activity. In this article, we have shown that incorporation of sulfate in pre-annealed materials plays a pivotal role in boosting the OER activity of annealed Co₃ O₄ irrespective of the pre-annealed phase. In contrast to commonly used nitrate or carbonate that leaves the structure upon annealing and renders the resulting Co₃ O₄ with poor activity, sulfate remains in the annealed structure due to its thermal stability and causes a dramatic enhancement in the geometric electrocatalytic OER activity of resulting Co₃ O₄ compared to the pre-annealed phase. This was due to the "pore-alteration ability" and "crystallization hindrance effect" of sulfate ions that significantly alter the microstructure of the resulting Co₃ O₄ during annealing process by dramatically improving the surface area, pore size, and pore volume. Moreover, sulfate incorporation provided structures with considerably higher mesoporosity that is known to be conducive for reactant and product diffusion within the network. The improved textural properties led to better exposure of the catalytic centres to the electrolyte leading to higher geometric OER activity despite identical intrinsic activity of both sulfate free and incorporated Co₃ O₄ as confirmed from their specific activities. Further, the Co₃ O₄ synthesized by annealing sulfate incorporated precursor was found to be rich with oxygen defects that are known to increase the potency of a material towards electrocatalytic OER. The sulfate ions also etched out in the electrolyte during electrocatalysis leading to complete unblocking of the pores thereby helping in sustaining the high geometric OER activity. To our knowledge, this is the first report where the geometric electrocatalytic OER activity of an annealed Co₃ O₄ is significantly better compared to its pre-annealed phase and is in fact comparable to the activity of amorphous Co-hydroxide based compounds.

Fe(III) Ions-Assisted Aniline Polymerization Strategy to Nitrogen-Doped Carbon-Supported Bimetallic CoFeP Nanospheres as Efficient Bifunctional Electrocatalysts toward Overall Water Splitting

It remains an urgent demand and challenging task to design and fabricate efficient, stable, and inexpensive catalysts toward sustainable electrochemical water splitting for hydrogen production. Herein, we explored the use of Fe(III) ion-assisted aniline polymerization strategy to embed bimetallic CoFeP nanospheres into the nitrogen-doped porous carbon framework (referred CoFeP-NC). The as-prepared CoFeP-NC possesses excellent hydrogen evolution reaction (HER) performance with the small overpotential (η₁₀) of 81 mV and 173 mV generated at a current density of 10 mA cm^-2 in acidic and alkaline media, respectively. Additionally, it can also efficiently catalyze water oxidation (OER), which shows an ideal overpotential (η₁₀) of 283 mV in alkaline electrolyte (pH = 14). The remarkable catalytic property of CoFeP-NC mainly stems from the strong synergetic effects of CoFeP nanospheres and carbon network. On the one hand, the interaction between the two can make better contact between the electrolyte and the catalyst, thereby providing a large number of available active sites. On the other hand, it can also form a network to offer better durability and electrical conductivity (8.64 × 10^-1 S cm^-1). This work demonstrates an efficient method to fabricate non-noble electrocatalyst towards overall water splitting, with great application prospect.

One-step synthesis of amorphous nickel iron phosphide hierarchical nanostructures for water electrolysis with superb stability at high current density

The development of noble-metal-free high-performance bifunctional catalysts for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is essential but challenging for hydrogen production from water electrolysis. Herein, amorphous bimetallic nickel-iron phosphide hierarchical nanostructures enrooted on nickel-iron alloy foam (NiFeP/NFF) are facilely fabricated via direct phosphidation of NFF at low temperature and developed as an efficient self-supporting bifunctional electrocatalyst to catalyze both the OER and HER with high activity, fast kinetics and excellent stability. Moreover, an alkaline water electrolyzer simultaneously utilizing NiFeP/NFF as the cathode and anode only needs a cell voltage of 1.58 V to afford a current density of 10 mA cm-2, overpassing most of the reported bifunctional electrocatalysts and comparable to noble metal-based ones. Impressively, the NiFeP/NFF-based symmetric electrolyzer can work well without appreciable performance degradation at a high current density of 500 mA cm-2 for over 1000 h for continuous hydrogen production with 100% faradaic efficiency, showing superb durability and great promise for industrial application.

A highly stable CoMo2S4/Ni3S2 heterojunction electrocatalyst for efficient hydrogen evolution

A CoMo₂S₄/Ni₃S₂ heterojunction is prepared with an overpotential of only 51 mV to drive a current density of 10 mA cm⁻² in 1 M KOH solution and ∼100% of the potential remains in the ∼50 h chronopotentiometric curve at 10 mA cm⁻².

An etch-doping strategy: cobalt–iron bimetallic phosphide as a bifunctional electrocatalyst for highly efficient water splitting

Using methods of nanowire precursor growth, etch doping, and low-temperature phosphorylation, Co₁Fe_0.1P/NF nanowires with excellent properties for the HER (73 mV at 10 mA cm⁻²) and OER (257 mV at 10 mA cm⁻²) were designed and synthesized successfully.

Coupling Co2P/CoSe2 heterostructure nanoarrays for boosting overall water splitting

Exploiting environmentally friendly and robust electrocatalysts for overall water splitting is of utmost importance in order to alleviate the excessive global energy consumption and climate change. Herein, a simple phosphoselenization method was used to prepare Co2P and CoSe2 coupled nanosheet and nanoneedle composite materials on nickel foam (Co2P/CoSe2/NF). Density functional theory calculations showed that Co2P had a higher water adsorption energy compared with CoSe2, indicating that H2O molecules are strongly adsorbed on the active sites of Co2P, which speeds up the kinetic process of water splitting. The Co2P/CoSe2-300 material displayed superior electrocatalytic activity for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in an alkaline medium. It's worth noting that the Co2P/CoSe2-300 composite material nanoarrays merely needed an ultralow overpotential of 280 mV to drive a current intensity of 100 mA cm-2 for OER. In addition, when a two-electrode system was constructed for overall water splitting, the current intensity of 20 mA cm-2 could be reached while requiring an ultrasmall cell voltage of 1.52 V, which is one of the best catalytic activities reported up to now. Experimental and density functional theory calculations showed that the superior electrocatalytic performance of Co2P/CoSe2-300 could be attributed to its higher electron-transfer rate, higher water adsorption energy, and the synergistic effect of Co2P and CoSe2. Our work provides a novel approach for the one-step construction of composite materials as environmentally friendly and inexpensive water splitting catalysts.

Enhanced Oxygen Evolution Reaction Activity by Encapsulating NiFe Alloy Nanoparticles in Nitrogen-Doped Carbon Nanofibers

The rational design and exploration of the oxygen evolution reaction (OER) electrocatalysts with high efficiency, low cost, and long-term durability are extremely important for overall water splitting. Recently, numerous studies have shown that the OER reaction kinetics can be modified by optimizing components, introducing carbon matrix, and regulating porous nanostructures. Herein, a flexible and controllable electrospinning strategy is proposed to construct porous nitrogen (N)-doped carbon (C) nanofibers (NFs) with nickel-iron (NiFe) alloy nanoparticles encapsulated inside (NiFe@NCNFs) as an OER electrocatalyst. Benefiting from the strong synergistic effects that stem from the one-dimensional mesoporous structures with optimized binary metal components encapsulated in the N-doped carbon nanofibers, the NiFe@NCNFs exhibits enhanced OER performance with a low overpotential (294 mV at 10 mA cm^-2) and excellent durability (over 10 h at 10 mA cm^-2) in alkaline solution. Both experimental characterizations and density functional theory (DFT) calculations validate that a suitable binary metal ratio can lead to the optimal catalytic activity. Moreover, a two-electrode electrolyzer is assembled by using NiFe@NCNFs anode and Pt/C cathode in 1.0 M KOH media for the overall water splitting, which delivers an initial cell voltage of only 1.531 V at 10 mA cm^-2, as well as long-term stability up to 20 h. This study sheds light on the design and large-scale production of low-cost and high-performance electrocatalysts toward different energy applications in the future.

One-step fabrication of a self-supported Co@CoTe2 electrocatalyst for efficient and durable oxygen evolution reactions

The optimal hydrothermal synthesis of a Co@CoTe₂-240 electrode needs an overpotential of 286 mV to achieve a current density of 10 mA cm⁻² and is able to sustain galvanostatic OER electrolysis for 16 hours with little degradation of less than 20 mV.