Multifunctional porous organic polymers (POPs): Inverse adsorption of hydrogen over nitrogen, stabilization of Pd(0) nanoparticles, and catalytic cross-coupling reactions and reductions

Urea-rich porous organic polymer as a hydrogen bond catalyst for Knoevenagel condensation reaction and synthesis of 2,3-dihydroquinazolin-4(1H)-ones

In this research, a new urea-rich porous organic polymer (urea-rich POP) as a hydrogen bond catalyst was synthesized via a solvothermal method. The physiochemical properties of the synthesized urea-rich POP were investigated by using different analyses like Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), derivative thermogravimetry (DTG), energy-dispersive X-ray spectroscopy (EDS), elemental mapping analysis, X-ray diffraction analysis (XRD) and Brunauer-Emmett-Teller (BET) techniques. The preparation of urea-rich POP provides an efficacious platform for designing unique hydrogen bond catalytic systems. Accordingly, urea-rich POP, due to the existence of several urea moieties as hydrogen bond sites, has excellent performance as a catalyst for the Knoevenagel condensation reaction and multi-component synthesis of 2,3-dihydroquinazolin-4(1H)-ones.

Green construction of hydroxyl-functionalized magnetic porous organic framework for effective extraction of triazine herbicides from environmental water and watermelon juice samples

Triazine herbicides have been widely detected in water resources and food, which poses a potential hazard to both ecosystem and human health. Due to their high polarity, conventional adsorbents have limitations for their extractions. Herein, for the effective magnetic extraction of triazine herbicides, a novel and effective magnetic adsorbent was prepared with a satisfactory extraction performance. In the experiments, five porous organic frameworks (POFs) with hydroxyl functional groups were synthesized by diazo-coupling reactions in aqueous solution with β-cyclodextrin (β-CD) as a green monomer. After evaluation of the five POFs, the DDM-CD-POF, which was synthesized with 4'4-diaminodiphenylmethane (DDM) and β-CD, showed the largest specific surface area and the best adsorption capacity for the five triazine herbicides. Then, it was magnetized by introducing Fe₃O₄@SiO₂ into it to prepare a magnetic adsorbent (M-DDM-CD-POF) to facilitate separation and recycling. Finally, the M-DDM-CD-POF-based magnetic solid-phase extraction in combination with high performance liquid chromatographic detection method was established for the quantitative determination of the triazine herbicides in environmental water and watermelon juice samples. The current strategy showed low limits of detection of 0.03-0.11 ng mL^-1 for environmental water and 0.07-0.22 ng mL^-1 for watermelon juice sample. The method recoveries for spiked samples ranged from 84.0% to 113.0% with the relative standard deviations ≤8.8%. This work provides a new approach for the detection of the triazine herbicides with good application prospect.

A magnetic porous organic polymer: catalytic application in the synthesis of hybrid pyridines with indole, triazole and sulfonamide moieties

Herein, the synthesis and characterization of a triazine-based magnetic ionic porous organic polymer are reported. The structure, morphology, and components of the prepared structure have been investigated with several spectroscopic and microscopic techniques such as FT-IR, EDX, elemental mapping, TGA/DTA, SEM, TEM, VSM, and BET analysis. Also, catalytic application of the prepared triazine-based magnetic ionic porous organic polymer was investigated for the synthesis of hybrid pyridine derivatives bearing indole, triazole and sulfonamide groups. Furthermore, the prepared hybrid pyridine systems were characterized by FT-IR, ¹H NMR, ¹³C NMR and mass analysis. A cooperative vinylogous anomeric-based oxidation pathway was suggested for the synthesis of target molecules.

General experimental procedure for the synthesis of hybrid pyridines using TMIPOP as catalyst.

Coumarin Derivatives Exert Anti-Lung Cancer Activity by Inhibition of Epithelial–Mesenchymal Transition and Migration in A549 Cells

A series of coumarin derivatives and isosteres were synthesized from the reaction of triflic intermediates with phenylboronic acids, terminal alkynes, and organozinc compounds through palladium-catalyzed cross-coupling reactions. The in vitro cytotoxic effect of the compounds was evaluated against two non-small cell lung carcinoma (NSCLC) cell lines (A-549 and H2170) and a normal cell line (NIH-3T3) using cisplatin as a reference drug. Additionally, the effects of the most promising coumarin derivative (9f) in reversing the epithelial-to-mesenchymal transition (EMT) in IL-1β-stimulated A549 cells and in inhibiting the EMT-associated migratory ability in A549 cells were also evaluated. 9f had the greatest cytotoxic effect (CC₅₀ = 7.1 ± 0.8 and 3.3 ± 0.5 μM, respectively against A549 and H2170 cells) and CC₅₀ value of 25.8 µM for NIH-3T3 cells. 9f inhibited the IL-1β-induced EMT in epithelial cells by inhibiting the F-actin reorganization, attenuating changes in the actin cytoskeleton reorganization, and downregulating vimentin in A549 cells stimulated by IL-1β. Treatment of A549 cells with 9f at 7 µM for 24 h significantly reduced the migration of IL-1β-stimulated cells, which is a phenomenon confirmed by qualitative assessment of the wound closure. Taken together, our findings suggest that coumarin derivatives, especially compound 9f, may become a promising candidate for lung cancer therapy, especially in lung cancer promoted by NSCLC cell lines.

Mono- and Bimetallic Nanoparticles Stabilized by an Aromatic Polymeric Network for a Suzuki Cross-Coupling Reaction

This work addresses the Suzuki cross-coupling between 4-bromoanisole (BrAn) and phenylboronic acid (PBA) in an environmentally benign ethanol-water solvent catalysed by mono- (Pd) and bimetallic (PdAu, PdCu, PdZn) nanoparticles (NPs) stabilised within hyper-cross-linked polystyrene (HPS) bearing tertiary amino groups. Small Pd NPs of about 2 nm in diameters were formed and stabilized by HPS independently in the presence of other metals. High catalytic activity and complete conversion of BrAn was attained at low Pd loading. Introduction of Zn to the catalyst composition resulted in the formation of Pd/Zn/ZnO NPs, which demonstrated nearly double activity as compared to Pd/HPS. Bimetallic core-shell PdAu/HPS samples were 3-fold more active as compared to Pd/HPS. Both Pd/HPS and PdAu/HPS samples revealed promising stability confirmed by catalyst recycling in repeated reaction runs.

Amide-based xanthine oxidase inhibitors bearing an N-(1-alkyl-3-cyano-1H-indol-5-yl) moiety: Design, synthesis and structure-activity relationship investigation

Our previous work identified a promising isonicotinamide based xanthine oxidase (XO) inhibitor, N-(3-cyano-4-((2-cyanobenzyl)oxy)phenyl)isonicotinamide (1), and concluded that amide is an effective linker in exploring the XO inhibitor chemical space that is completely different from the five-membered ring framework of febuxostat and topiroxostat. Indole, an endogenous bioactive substance and a popular drug construction fragment, was involved in the structural optimization campaign of the present effort. After the installation of some functional groups, N-(1-alkyl-3-cyano-1H-indol-5-yl) was generated and employed to mend the missing H-bond interaction between the 3'-cyano of 1 and Asn768 residue of XO by shortening their distance. In this context, eight kinds of heterocyclic aromatic amide chemotypes were rationally designed and synthesized to investigate the structure-activity relationship (SAR) of amide-based XO inhibitors. The optimized compound a6 (IC₅₀ = 0.018 μM) exhibits 17.2-fold improved potency than the initial compound 1 (IC₅₀ = 0.31 μM). Its potency is comparable to that of topiroxostat (IC₅₀ = 0.013 μM). Molecular docking and molecular dynamics studies proved the existence of the stable H-bond between the cyano group and the Asn768 residue. Moreover, oral administration of a6 (11.8 mg/kg) could effectively reduce serum uric acid levels in an acute hyperuricemia rat model. Liver microsomal stability assay illustrated that compound a6 possesses well metabolic stability in rat liver microsomes. However, the in vivo potency of a6 was much lower than that of topiroxostat, which may be explained by the poor absorption found in the parallel artificial membrane permeability assay (PAMPA). In addition, 6a has non-cytotoxicity against normal cell lines MCF10A and 16HBE. Taken together, this work culminated in the identification of compound 6a as an excellent lead for further exploration of amide-based XO inhibitors.

Recent progress in environmental applications of metal-organic frameworks

Nanomaterials have aroused the interest of many researchers and become a research hotspot in recent years and metal-organic frameworks (MOFs) included in that are a class of new organic-inorganic hybrid porous materials formed through the self-assembly of organic ligands and inorganic metal ions. MOFs have been attracting increasing attention due to their structural diversification, large specific surface area, high porosity, inerratic pore space framework. These characteristics play their advantages in different fields and make some excellent achievements. This article summarizes the research progress of metal-organic framework in the field of environment especially the remarkable achievements in adsorption and provides a clear help for understanding the research progress and prospects for future research.