Left atrial appendage closure guided by 3D computed tomography printing technology: A case control study

The Application of Precision Medicine in Structural Heart Diseases: A Step towards the Future

The personalized applications of 3D printing in interventional cardiology and cardiac surgery represent a transformative paradigm in the management of structural heart diseases. This review underscores the pivotal role of 3D printing in enhancing procedural precision, from preoperative planning to procedural simulation, particularly in valvular heart diseases, such as aortic stenosis and mitral regurgitation. The ability to create patient-specific models contributes significantly to predicting and preventing complications like paravalvular leakage, ensuring optimal device selection, and improving outcomes. Additionally, 3D printing extends its impact beyond valvular diseases to tricuspid regurgitation and non-valvular structural heart conditions. The comprehensive synthesis of the existing literature presented here emphasizes the promising trajectory of individualized approaches facilitated by 3D printing, promising a future where tailored interventions based on precise anatomical considerations become standard practice in cardiovascular care.

An Exploratory Pilot Study on the Application of Radiofrequency Ablation for Atrial Fibrillation Guided by Computed Tomography-Based 3D Printing Technology

Radiofrequency ablation (RFA) is the treatment of choice for atrial fibrillation (AF). Additionally, the utilization of 3D printing for cardiac models offers an in-depth insight into cardiac anatomy and cardiovascular diseases. The study aims to evaluate the clinical utility and outcomes of RFA following in vitro visualization of the left atrium (LA) and pulmonary vein (PV) structures via 3D printing (3DP). Between November 2017 and April 2021, patients who underwent RFA at the First Affiliated Hospital of Xinxiang Medical University were consecutively enrolled and randomly allocated into two groups: the 3DP group and the control group, in a 1:1 ratio. Computed tomography angiography (CTA) was employed to capture the morphology and diameter of the LA and PV, which facilitated the construction of a 3D entity model. Additionally, surgical procedures were simulated using the 3D model. Parameters such as the duration of the procedure, complications, and rates of RFA recurrence were meticulously documented. Statistical analysis was performed using the t-test or Mann-Whitney U test to evaluate the differences between the groups, with a P-value of less than 0.05 considered statistically significant. In this study, a total of 122 patients were included, with 53 allocated to the 3DP group and 69 to the control group. The analysis of the morphological measurements of the LA and PV taken from the workstation or direct entity measurement showed no significant difference between the two groups (P > 0.05). However, patients in the 3DP group experienced significantly shorter RFA times (97.03 ± 28.39 compared to 120.51 ± 44.76 min, t = 3.05, P = 0.003), reduced duration of radiation exposure (2.55 [interquartile range 2.01, 3.24] versus 3.20 [2.28, 3.91] min, Z = 3.23, P < 0.001), and shorter modeling times (7.68 ± 1.03 compared to 8.89 ± 1.45 min, t = 5.38, P < 0.001). 3DP technology has the potential to enhance standard RFA practices by reducing the time required for intraoperative interventions and exposure to radiation.

Preprocedural Planning of Left Atrial Appendage Occlusion: A Review of the Use of Additive Manufacturing

Stroke is a significant public health problem, with non-valvular atrial fibrillation (NVAF) being one of its main causes. This cardiovascular arrhythmia predisposes to the production of intracardiac thrombi, mostly formed in the left atrial appendage (LAA). When there are contraindications to treatment with oral anticoagulants, another therapeutic option to reduce the possibility of thrombus formation in the LAA is the implantation of an occlusion device by cardiac catheterization. The effectiveness of LAA occlusion is dependent on accurate preprocedural device sizing and proper device positioning at the LAA ostium, to ensure sufficient device anchoring and avoid peri-device leaks. Additive manufacturing, commonly known as three-dimensional printing (3DP), of LAA models is beginning to emerge in the scientific literature to address these challenges through procedural simulation. This review aims at clarifying the impact of 3DP on preprocedural planning of LAA occlusion, specifically in the training of cardiac surgeons and in the assessment of the perfect adjustment between the LAA and the biomedical implant.

Cardiovascular Computed Tomography in the Diagnosis of Cardiovascular Disease: Beyond Lumen Assessment

Cardiovascular CT is being widely used in the diagnosis of cardiovascular disease due to the rapid technological advancements in CT scanning techniques. These advancements include the development of multi-slice CT, from early generation to the latest models, which has the capability of acquiring images with high spatial and temporal resolution. The recent emergence of photon-counting CT has further enhanced CT performance in clinical applications, providing improved spatial and contrast resolution. CT-derived fractional flow reserve is superior to standard CT-based anatomical assessment for the detection of lesion-specific myocardial ischemia. CT-derived 3D-printed patient-specific models are also superior to standard CT, offering advantages in terms of educational value, surgical planning, and the simulation of cardiovascular disease treatment, as well as enhancing doctor-patient communication. Three-dimensional visualization tools including virtual reality, augmented reality, and mixed reality are further advancing the clinical value of cardiovascular CT in cardiovascular disease. With the widespread use of artificial intelligence, machine learning, and deep learning in cardiovascular disease, the diagnostic performance of cardiovascular CT has significantly improved, with promising results being presented in terms of both disease diagnosis and prediction. This review article provides an overview of the applications of cardiovascular CT, covering its performance from the perspective of its diagnostic value based on traditional lumen assessment to the identification of vulnerable lesions for the prediction of disease outcomes with the use of these advanced technologies. The limitations and future prospects of these technologies are also discussed.

Transseptal puncture in left atrial appendage closure guided by 3D printing and multiplanar CT reconstruction

BACKGROUND

The presented study investigates the application of bi-arterial 3D printed models to guide transseptal puncture (TSP) in left atrial appendage closure (LAAC).

AIMS

The objectives are to (1) test the feasibility of 3D printing (3DP) for TSP guidance, (2) analyse the distribution of the optimal TSP locations, and (3) define a CT-derived 2D parameter suitable for predicting the optimal TSP locations.

METHODS

Preprocedural planning included multiplanar CT reconstruction, 3D segmentation, and 3DP. TSP was preprocedurally simulated in vitro at six defined sites. Based on the position of the sheath, TSP sites were classified as optimal, suboptimal, or nonoptimal. The aim was to target the TSP in the recommended position during the procedure. Procedure progress was assessed post hoc by the operator.

RESULTS

Of 68 screened patients, 60 patients in five centers (mean age of 74.68 ± 7.64 years, 71.66% males) were prospectively analyzed (3DP failed in one case, and seven patients did not finally undergo the procedure). In 55 patients (91.66%), TSP was performed in the optimal location as recommended by the 3DP. The optimal locations for TSP were postero-inferior in 45.3%, mid-inferior in 45.3%, and antero-inferior in 37.7%, with a mean number of optimal segments of 1.34 ± 0.51 per patient. When the optimal TSP location was achieved, the procedure was considered difficult in only two (3.6%) patients (but in both due to complicated LAA anatomy). Comparing anterior versus posterior TSP in 2D CCT, two parameters differed significantly: (1) the angle supplementary to the LAA ostium and the interatrial septum angle (160.83° ± 9.42° vs. 146.49° ± 8.67°; p = 0.001), and (2) the angle between the LAA ostium and the mitral annulus (95.02° ± 3.73° vs. 107.38° ± 6.76°; p < 0.001), both in the sagittal plane.

CONCLUSIONS

In vitro TSP simulation accurately determined the optimal TSP locations for LAAC and facilitated the procedure. More than one-third of the optimal TSP sites were anterior.

Three-Dimensional Bioprinting in Cardiovascular Disease: Current Status and Future Directions

Three-dimensional (3D) printing plays an important role in cardiovascular disease through the use of personalised models that replicate the normal anatomy and its pathology with high accuracy and reliability. While 3D printed heart and vascular models have been shown to improve medical education, preoperative planning and simulation of cardiac procedures, as well as to enhance communication with patients, 3D bioprinting represents a potential advancement of 3D printing technology by allowing the printing of cellular or biological components, functional tissues and organs that can be used in a variety of applications in cardiovascular disease. Recent advances in bioprinting technology have shown the ability to support vascularisation of large-scale constructs with enhanced biocompatibility and structural stability, thus creating opportunities to replace damaged tissues or organs. In this review, we provide an overview of the use of 3D bioprinting in cardiovascular disease with a focus on technologies and applications in cardiac tissues, vascular constructs and grafts, heart valves and myocardium. Limitations and future research directions are highlighted.

Centerline depth world for left atrial appendage orifice localization using reinforcement learning

Left atrial appendage (LAA) occlusion (LAAO) is a minimally invasive implant-based method to prevent cardiovascular stroke in patients with non-valvular atrial fibrillation. Assessing the LAA orifice in preoperative CT angiography plays a crucial role in choosing an appropriate LAAO implant size and a proper C-arm angulation. However, accurate orifice localization is hard because of the high anatomic variation of LAA, and unclear position and orientation of the orifice in available CT views. With the major research focus being on LAA segmentation, the only existing computational method for orifice localization utilized a rule-based decision. Nonetheless, using such a fixed rule may yield high localization error due to the varied anatomy of LAA. While deep learning-based models usually show improvements under such variation, learning an effective localization model is difficult because of the tiny orifice structure compared to the vast search space of CT volume. In this paper, we propose a centerline depth-based reinforcement learning (RL) world for effective orifice localization in a small search space. In our scheme, an RL agent observes the centerline-to-surface distance and navigates through the LAA centerline to localize the orifice. Thus, the search space is significantly reduced facilitating improved localization. The proposed formulation could result in high localization accuracy compared to the expert annotations. Moreover, the localization process takes about 7.3 s which is 18 times more efficient than the existing method. Therefore, this can be a useful aid to physicians during the preprocedural planning of LAAO.

3D Printed Models in Cardiovascular Disease: An Exciting Future to Deliver Personalized Medicine

3D printing has shown great promise in medical applications with increased reports in the literature. Patient-specific 3D printed heart and vascular models replicate normal anatomy and pathology with high accuracy and demonstrate superior advantages over the standard image visualizations for improving understanding of complex cardiovascular structures, providing guidance for surgical planning and simulation of interventional procedures, as well as enhancing doctor-to-patient communication. 3D printed models can also be used to optimize CT scanning protocols for radiation dose reduction. This review article provides an overview of the current status of using 3D printing technology in cardiovascular disease. Limitations and barriers to applying 3D printing in clinical practice are emphasized while future directions are highlighted.

3D printing for left atrial appendage closure: A meta-analysis and systematic review

BACKGROUND

Three-dimensional printing (3D) has emerged as an alternative to imaging to guide left atrial appendage closure (LAAC) device sizing.

AIMS

We assessed the usefulness of 3D printing compared to a standard imaging-only approach for LAAC.

METHODS

We identified studies comparing an imaging-only with a 3D printing approach in LAAC. A fixed-effects meta-analysis was performed targeting a co-primary endpoint of disagreement in device sizing and leaks.

RESULTS

Eight studies that assigned 283 participants to an imaging-only approach and 3D printing approach (145 patients) were included. 3D printing significantly reduced the risk of the co-primary endpoint (risk raio (RR) = 0.19; 95% confidence interval (CI) 0.09-0.37), with consistency across the studies (I2 = 0%). Individually, both device size disagreements [RR 0.13 (95% CI 0.06-0.29), P < 0.001] and leaks [RR 0.24 (95% CI 0.09-0.64) P = 0.004] were reduced under a 3D printing modeling strategy.

CONCLUSION

Compared with an imaging-only strategy, 3D printing is associated with reduction in device size disagreements and leaks.

Left Atrial Appendage Occlusion for Stroke Prevention in Nonvalvular Atrial Fibrillation

The majority of embolic strokes in patients with nonvalvular atrial fibrillation are caused by thrombi in the left atrial appendage. It is projected that strokes related to atrial fibrillation will markedly increase in the future unless effective mitigation strategies are implemented. Systemic anticoagulation has been known to be highly effective in reducing stroke risk in patients with atrial fibrillation. However, bleeding complications and nonadherence are barriers to effective anticoagulation therapy. Surgical and percutaneous left atrial appendage occlusion devices are nonpharmacologic strategies to mitigate the challenges of drug therapy. We present a contemporary review of left atrial appendage occlusion for stroke prevention in nonvalvular atrial fibrillation. A thorough review of the history of surgical and percutaneous left atrial appendage occlusion devices, recent trials, and US Food and Drug Administration milestones of current left atrial appendage occlusion devices are discussed.

Establishing Quality and Safety in Hospital-based 3D Printing Programs: Patient-first Approach

The adoption of three-dimensional (3D) printing is rapidly spreading across hospitals, and the complexity of 3D-printed models and devices is growing. While exciting, the rapid growth and increasing complexity also put patients at increased risk for potential errors and decreased quality of the final product. More than ever, a strong quality management system (QMS) must be in place to identify potential errors, mitigate those errors, and continually enhance the quality of the product that is delivered to patients. The continuous repetition of the traditional processes of care, without insight into the positive or negative impact, is ultimately detrimental to the delivery of patient care. Repetitive tasks within a process can be measured, refined, and improved and translate into high levels of quality, and the same is true within the 3D printing process. The authors share their own experiences and growing pains in building a QMS into their 3D printing processes. They highlight errors encountered along the way, how they were addressed, and how they have strived to improve consistency, facilitate communication, and replicate successes. They also describe the vital intersection of health care providers, regulatory groups, and traditional manufacturers, who contribute essential elements to a common goal of providing quality and safety to patients. ©RSNA, 2021.

Application of 3D Printing in Preoperative Planning

Preoperative planning is critical for success in the surgical suite. Current techniques for surgical planning are limited; clinicians often rely on prior experience and medical imaging to guide the decision-making process. Furthermore, two-dimensional (2D) presentations of anatomical structures may not accurately portray their three-dimensional (3D) complexity, often leaving physicians ill-equipped for the procedure. Although 3D postprocessed images are an improvement on traditional 2D image sets, they are often inadequate for surgical simulation. Medical 3D printing is a rapidly expanding field and could provide an innovative solution to current constraints of preoperative planning. As 3D printing becomes more prevalent in medical settings, it is important that clinicians develop an understanding of the technologies, as well as its uses. Here, we review the fundamentals of 3D printing and key aspects of its workflow. The many applications of 3D printing for preoperative planning are discussed, along with their challenges.

Clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: adult cardiac conditions

BACKGROUND

Medical 3D printing as a component of care for adults with cardiovascular diseases has expanded dramatically. A writing group composed of the Radiological Society of North America (RSNA) Special Interest Group on 3D Printing (SIG) provides appropriateness criteria for adult cardiac 3D printing indications.

METHODS

A structured literature search was conducted to identify all relevant articles using 3D printing technology associated with a number of adult cardiac indications, physiologic, and pathologic processes. Each study was vetted by the authors and graded according to published guidelines.

RESULTS

Evidence-based appropriateness guidelines are provided for the following areas in adult cardiac care; cardiac fundamentals, perioperative and intraoperative care, coronary disease and ischemic heart disease, complications of myocardial infarction, valve disease, cardiac arrhythmias, cardiac neoplasm, cardiac transplant and mechanical circulatory support, heart failure, preventative cardiology, cardiac and pericardial disease and cardiac trauma.

CONCLUSIONS

Adoption of common clinical standards regarding appropriate use, information and material management, and quality control are needed to ensure the greatest possible clinical benefit from 3D printing. This consensus guideline document, created by the members of the RSNA 3D printing Special Interest Group, will provide a reference for clinical standards of 3D printing for adult cardiac indications.