Membrane separations using molecularly imprinted polymers

A Homochiral Porous Organic Cage-Polymer Membrane for Enantioselective Resolution

Membrane-based enantioselective separation is a promising method for chiral resolution due to its low cost and high efficiency. However, scalable fabrication of chiral separation membranes displaying both high enantioselectivity and high flux of enantiomers is still a challenge. Here, the authors report the preparation of homochiral porous organic cage (Covalent cage 3 (CC3)-R)-based enantioselective thin-film-composite membranes using polyamide (PA) as the matrix, where fully organic and solvent-processable cage crystals have good compatibility with the polymer scaffold. The hierarchical CC3-R channels consist of chiral selective windows and inner cavities, leading to favorable chiral resolution and permeation of enantiomers; the CC3-R/PA composite membranes display an enantiomeric excess of 95.2% for R-(+)-limonene over S-(-)-limonene and a high flux of 99.9 mg h-1 m-2. This work sheds light on the use of homochiral porous organic cages for preparing enantioselective membranes and demonstrates a new route for the development of next-generation chiral separation membranes.

Supramolecular Interaction Modulation in Thermosensitive Composites: Enantiomeric Recognition and Chiral Site Regeneration

Herein, a novel strategy was implemented to modulate the supramolecular interaction between enantiomers and chiral recognition sites (CRSs), effectively resolving the issue of CRS saturation. Randomly methylated-β-cyclodextrin (Rm-β-CD) was used as the CRS (host molecule), and polymerized ionic liquids [poly([vbim]TFSI)] were used as the supramolecular modulator (guest molecule), which self-assembled to generate thermosensitive supramolecular host/guest complexes. The enantiomeric binding capacity and enantioselectivity of chiral separation systems centered on supramolecular host-guest complexes are characterized by a high degree of temperature dependence. Poly([vbim]TFSI) bonded to Rm-β-CD at temperatures between 17 °C ± 3 and 50 °C ± 3 °C, and the binding free energy difference (|ΔΔG|) between the (S)- and (R)-enantiomer was 0.55. Conversely, poly([vbim]TFSI detached from Rm-β-CD at temperatures >50 °C ± 3 °C or <17 °C ± 3 °C, and |ΔΔG| between (S)- and (R)-enantiomer was 0.03. The |ΔΔG| value of the (R)-enantiomer can reach 0.86 in two temperature intervals. Therefore, the binding of poly([vbim]TFSI) to Rm-β-CD afforded the favorable separation of four racemic sample mixtures: mandelic acid (e.e.% = 61.3%), ibuprofen (e.e.% = 21.6%), warfarin (e.e.% = 14.9%), and naproxen (e.e% = 18.2%). The detachment of poly([vbim]TFSI) from Rm-β-CD released the enantiomer bound to CRSs. The decomplexation of mandelic acid reached 75.1%.

Advanced Development of Molecularly Imprinted Membranes for Selective Separation

Molecularly imprinted membranes (MIMs), the incorporation of a given target molecule into a membrane, are generally used for separating and purifying the effective constituents of various natural products. They have been in use since 1990. The application of MIMs has been studied in many fields, including separation, medicine analysis, solid-phase extraction, and so on, and selective separation is still an active area of research. In MIM separation, two important membrane performances, flux and permselectivities, show a trade-off relationship. The enhancement not only of permselectivity, but also of flux poses a challenging task for membranologists. The present review first describes the recent development of MIMs, as well as various preparation methods, showing the features and applications of MIMs prepared with these different methods. Next, the review focuses on the relationship between flux and permselectivities, providing a detailed analysis of the selective transport mechanisms. According to the majority of the studies in the field, the paramount factors for resolving the trade-off relationship between the permselectivity and the flux in MIMs are the presence of effective high-density recognition sites and a high degree of matching between these sites and the imprinted cavity. Beyond the recognition sites, the membrane structure and pore-size distribution in the final imprinted membrane collectively determine the selective transport mechanism of MIM. Furthermore, it also pointed out that the important parameters of regeneration and antifouling performance have an essential role in MIMs for practical applications. This review subsequently highlights the emerging forms of MIM, including molecularly imprinted nanofiber membranes, new phase-inversion MIMs, and metal-organic-framework-material-based MIMs, as well as the construction of high-density recognition sites for further enhancing the permselectivity/flux. Finally, a discussion of the future of MIMs regarding breakthroughs in solving the flux-permselectivity trade-off is offered. It is believed that there will be greater advancements regarding selective separation using MIMs in the future.

Molecularly Imprinted Affinity Membrane: A Review

A molecularly imprinted affinity membrane (MIAM) can perform separation with high selectivity due to its unique molecular recognition introduced from the molecular-printing technique. In this way, a MIAM is able to separate a specific or targeted molecule from a mixture. In addition, it is possible to achieve high selectivity while maintaining membrane permeability. Various methods have been developed to produce a MIAM with high selectivity and productivity, with their respective advantages and disadvantages. In this paper, the MIAM is reviewed comprehensively, from the fundamentals of the affinity membrane to its applications. First, the development of a MIAM and various preparation methods are presented. Then, applications of MIAMs in sensor, metal ion separation, and organic compound separation are discussed. The last part of the review discusses the outlook of MIAMs for future development.

Advances and applications of chiral resolution in pharmaceutical field

The attention to chiral drugs has been raised to an unprecedented level as drug discovery and development strategies grow rapidly. However, separation of enantiomers is still a huge task, which leads to an increasing significance to equip a wider range of expertise in chiral separation science to meet the current and future challenges. In the last few decades, remarkable progress of chiral resolution has been achieved. This review summarizes and classifies chiral resolution methods in analytical scale and preparative scale systematically and comprehensively, including crystallization-based method, inclusion complexation, chromatographic separation, capillary electrophoresis, kinetic resolution, liquid-liquid extraction, membrane-based separation, and especially one bold new progress based on chiral-induced spin selectivity theory. The advances and recent applications will be presented in detail, in which the contents may bring more thinking to wide-ranging readers in various professional fields, from analytical chemistry, pharmaceutical chemistry, natural medicinal chemistry, to manufacturing of drug production.

Green Chemistry and Molecularly Imprinted Membranes

Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.

Molecularly Imprinted Polymers as State-of-the-Art Drug Carriers in Hydrogel Transdermal Drug Delivery Applications

Molecularly Imprinted Polymers (MIPs) are polymeric networks capable of recognizing determined analytes. Among other methods, non-covalent imprinting has become the most popular synthesis strategy for Molecular Imprinting Technology (MIT). While MIPs are widely used in various scientific fields, one of their most challenging applications lies within pharmaceutical chemistry, namely in therapeutics or various medical therapies. Many studies focus on using hydrogel MIPs in transdermal drug delivery, as the most valuable feature of hydrogels in their application in drug delivery systems that allow controlled diffusion and amplification of the microscopic events. Hydrogels have many advantages over other imprinting materials, such as milder synthesis conditions at lower temperatures or the increase in the availability of biological templates like DNA, protein, and nucleic acid. Moreover, one of the most desirable controlled drug delivery applications is the development of stimuli-responsive hydrogels that can modulate the release in response to changes in pH, temperature, ionic strength, or others. The most important feature of these systems is that they can be designed to operate within a particular human body area due to the possibility of adapting to well-known environmental conditions. Therefore, molecularly imprinted hydrogels play an important role in the development of modern drug delivery systems.

The Selectivity of Immunoassays and of Biomimetic Binding Assays with Imprinted Polymers

Molecularly imprinted polymers have been shown to be useful in competitive biomimetic binding assays. Recent developments in materials science have further enhanced the capabilities of imprinted polymers. Binding assays, biological and biomimetic alike, owe their usefulness to their selectivity. The selectivity of competitive binding assays has been characterized with the cross-reactivity, which is usually expressed as the ratio of the measured IC50 concentration values of the interferent and the analyte, respectively. Yet this cross-reactivity is only a rough estimate of analytical selectivity. The relationship between cross-reactivity and analytical selectivity has apparently not been thoroughly investigated. The present work shows that this relationship depends on the underlying model of the competitive binding assay. For the simple but widely adopted model, where analyte and interferent compete for a single kind of binding site, we provide a simple formula for analytical selectivity. For reasons of an apparent mathematical problem, this formula had not been found before. We also show the relationship between analytical selectivity and cross-reactivity. Selectivity is also shown to depend on the directly measured quantity, e.g., the bound fraction of the tracer. For those cases where the one-site competitive model is not valid, a practical procedure is adopted to estimate the analytical selectivity. This procedure is then used to analyze the example of the competitive two-site binding model, which has been the main model for describing molecularly imprinted polymer behavior. The results of this work provide a solid foundation for assay development.

Targeted Mitochondrial Fluorescence Imaging-Guided Tumor Antimetabolic Therapy with the Imprinted Polymer Nanomedicine Capable of Specifically Recognizing Dihydrofolate Reductase

As we all know, inhibiting the activity of dihydrofolate reductase (DHFR) has always been an effective strategy for folate antimetabolites to treat tumors. In the past, it mainly relied on chemical drugs. Here, we propose a new strategy, (3-propanecarboxyl)triphenylphosphonium bromide (CTPB)-modified molecularly imprinted polymer nanomedicine (MIP-CTPB). MIP-CTPB prepared by imprinting the active center of DHFR can specifically bind to the active center to block the catalytic activity of DHFR, thereby inhibiting the synthesis of DNA and ultimately inhibiting the tumor growth. The modification of CTPB allows the nanomedicine to be targeted and enriched in mitochondria, where DHFR is abundant. The confocal laser imaging results show that MIP-CTPB can target mitochondria. Cytotoxicity experiments show that MIP-CTPB inhibits HeLa cell proliferation by 42.2%. In vivo experiments show that the tumor volume of the MIP-CTPB-treated group is only one-sixth of that of the untreated group. The fluorescent and paramagnetic properties of the nanomedicine enable targeted fluorescence imaging of mitochondria and T2-weighted magnetic resonance imaging of tumors. This research not only opens up a new direction for the application of molecular imprinting, but also provides a new idea for tumor antimetabolic therapy guided by targeted mitochondrial imaging.

The Selectivity of Molecularly Imprinted Polymers

The general claim about novel molecularly imprinted polymers is that they are selective for their template or for another target compound. This claim is usually proved by some kind of experiment, in which a performance parameter of the imprinted polymer is shown to be better towards its template than towards interferents. A closer look at such experiments shows, however, that different experiments may differ substantially in what they tell about the same imprinted polymer's selectivity. Following a short general discussion of selectivity concepts, the selectivity of imprinted polymers is analyzed in batch adsorption, binding assays, chromatography, solid phase extraction, sensors, membranes, and catalysts. A number of examples show the problems arising with each type of application. Suggestions for practical method design are provided.

Enantioselective Mixed Matrix Membranes for Chiral Resolution

Most pharmaceuticals are stereoisomers that each enantiomer shows dramatically different biological activity. Therefore, the production of optically pure chemicals through sustainable and energy-efficient technology is one of the main objectives in the pharmaceutical industry. Membrane-based separation is a continuous process performed on a large scale that uses far less energy than the conventional thermal separation process. Enantioselective polymer membranes have been developed for chiral resolution of pharmaceuticals; however, it is difficult to generate sufficient enantiomeric excess (ee) with conventional polymers. This article describes a chiral resolution strategy using a composite structure of mixed matrix membrane that employs chiral fillers. We discuss several enantioselective fillers, including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), zeolites, porous organic cages (POCs), and their potential use as chiral fillers in mixed matrix membranes. State-of-the-art enantioselective mixed matrix membranes (MMMs) and the future design consideration for highly efficient enantioselective MMMs are discussed.

Multifunctional-imprinted nanocomposite membranes with thermo-responsive biocompatibility for selective/controllable recognition and separation application

Inspired by the biomimetic modification strategy of dopamine self-polymerization technique, molecularly imprinted nanocomposite membranes (MINCMs) with thermo-responsive rebinding and separation performance were synthesized and evaluated. Herein, the Au/SiO₂-based multilevel structure had been successfully obtained onto the polydopamine (pDA) modified membrane surfaces. Afterward, the poly(N-isopropylacrylamide)-based biomolecule-imprinted sites were adequately constructed by developing a photoinitiated atom transfer radical polymerization (pATRP) imprinting strategy using the high-biocompatible ovalbumin (Ova, pI 4.6) as template molecule. Therefore, thermo-responsive 'specific recognition sites' toward Ova were then achieved on the as-prepared MINCMs after the well-designed imprinting process. When the external temperature was set at 37 °C, excellent ovalbumin rebinding capacity (33.26 mg/g), selectivity factor (3.06) and structural stability were obtained. Importantly, as to the controllable biocompatibility research of this work, the bare glass and Ova-bound-MINCMs (the MINCMs were bound with Ova) showed basically the same cell adhesion behaviors and viability, indicating the excellent biocompatibility of the Ova-bound-MINCMs. Additionally, efficient and rapid regulation of cell adhesion/detachment on ovalbumin-bound MINCMs could be still obtained even after 10 cycles of temperature-switch process, which indicated that the as-prepared MINCMs had strong ability to work under high intensity and long continuous operation.

Advances of enantioselective solid membranes

Rosy prospects of chiral membranes are proposed with novel and robust materials.

Recent Advances in Molecularly Imprinted Membranes for Sample Treatment and Separation

This review describes the recent advances from the past five years concerning the development and applications of molecularly imprinted membranes (MIMs) in the field of sample treatment and separation processes. After a short introduction, where the importance of these materials is highlighted, a description of key aspects of membrane separation followed by the strategies of preparation of these materials is described. The review continues with several analytical applications of these MIMs for sample preparation as well as for separation purposes covering pharmaceutical, food, and environmental areas. Finally, a discussion focused on possible future directions of these materials in extraction and separation field is also given.

Advancements of chiral molecularly imprinted polymers in separation and sensor fields: A review of the last decade

Since chiral recognition mechanism based on molecularly imprinted polymers immerged, it has assisted countless chemical and electrochemical analytical sample preparation techniques. It has done this by enhancing the enatioseparation abilities of these techniques. The preparation and optimization of chiral molecularly imprinted polymers (CMIPs) are two favored methods in the separation and sensor fields. This review aims to present an overview of advances in the preparation and application of CMIPs in analytical approaches in different available formats (eg. column, monolithic column, cartridge, membrane, nanomaterials, pipette tip and stir bar sorptive) over the last decade. In addition, progress in the preparation and development of CMIPs-based sensor fields have been also discussed. Finally, the main application challenges of CMIPs are also summarily explained, as well as upcoming prospects in the field.

Enantioseparation processes and mechanisms in functionalized graphene membranes: Facilitated or retarded transport?

Up to date, functionalized graphene-based membranes have exhibited a promising potential in the enantioseparation. However, since precisely controlling the interlayer distance of two-dimensional materials is a great challenge in practical experiments, the transport mechanism of chiral guests in such membranes, together with various critical parameters that play a controlling role in the transport behaviors of the preferentially binding enantiomer in narrow channels, remains to be explored. The molecular dynamics (MD) simulation, especially using the steered MD (SMD) method, might be an alternative way to investigate the enantioseparation processes and mechanisms of layered membranes with different interlayer distances. In this work, D-alanine modified graphene sheets with different interlayer distances were built as membrane models, whereas D- and L-phenylalanine were selected as chiral probes. The effect of the interlayer distance and the applied external force on the enantioseparation performance was examined. Results show that such two parameters exert a significant influence on the enantioseparation performance: (a) Increasing the interlayer distance would result in a conversion from the retarded to the facilitated mechanism at a proper external force (medium); (b) both the large and small driving forces would only lead to the appearance of the retarded transport for the preferential enantiomer, unlike the moderate force; (c) the interaction energy of L-phenylalanine with D-isomer selector decreases with the rising interlayer distances studied in this work, regardless of what the external force is. Our findings can provide guidance on the practical applications in the membrane-based chiral separation.

Influence of molecular weight on PNIPAM brush modified colloidal silica particles

The effect of molecular weight and temperature on the phase transition and internal structure of poly(N-isopropylacrylamide) brush modified colloidal silica particles was investigated using dynamic light scattering (DLS) and small angle neutron scattering (SANS) between 15 and 45 °C. Dry particle analysis utilising transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) all confirmed the thickness of the polymer brush shell increased as a function of polymerisation time. Hydrodynamic diameter and electrophoretic mobility results revealed that the brush modified particles transitioned from swollen shells to a collapsed conformation between 15 and 35 °C. The dispersions were electrosterically stabilised over the entire temperature range investigated, with minimal thermal hysteresis recorded. Modelling of the hydrodynamic diameter enabled the calculation of a lower critical solution temperature (LCST) which increased as a function of brush thickness. The internal structure determined via SANS showed a swollen brush at low temperatures (18 and 25 °C) which decayed radially away from the substrate, while a collapsed block-like conformation with 60% polymer volume fraction was present at 40 °C. Radial phase separation was evident at intermediate temperatures (30 and 32.5 °C) with the lower molecular weight sample having a greater volume fraction of polymer in the dense inner region at these temperatures.

β-Cyclodextrin Functionalized Nanoporous Graphene Oxides for Efficient Resolution of Asparagine Enantiomers

Efficient resolution of racemic mixture has long been an attractive but challenging subject since Pasteur separated tartrate enantiomers in 19^th  century. Graphene oxide (GO) could be flexibly functionalized by using a variety of chiral host molecules and therefore, was expected to show excellent enantioselective resolution performance. However, this combination with efficient enantioselective resolution capability has been scarcely demonstrated. Here, nanoporous graphene oxides were produced and then covalently functionalized by using a chiral host material-β-cyclodextrin (β-CD). This chiral GO displayed enantioselective affinity toward the l-enantiomers of amino acids. In particular, >99 % of l-asparagine (Asn) was captured in a racemic solution of Asn while the adsorption of d-enantiomer was not observed. This remarkable resolution performance was subsequently modelled by using an attach-pull-release dynamic method. We expect this preliminary concept could be expanded to other chiral host molecules and be employed to current membrane separation technologies and finally show practical use for many other racemates.

Chiral Separation via Molecular Sieving: A Computational Screening of Suitable Functionalizations for Nanoporous Graphene

In a recent study [Angew. Chem. Int. Ed., 2014, 53, 9957–9960] a new concept of chiral separation has been suggested, which is based on functionalized, nanoporous sheets of graphene. In this follow‐up article we discuss the underlying principle in greater detail and make suggestions for suitable pore functionalizations with respect to a selection of chiral prototype molecules. Considering drug molecules as future targets for a chiral separation via membranes, the necessary pore sizes represent a big challenge for standard methods of computational chemistry. Therefore, we test two common force fields (GAFF, CGenFF) as well as a semiempirical tight‐binding approach recently developed by the Grimme group (GFN‐xTB) against the computationally much more expensive density functional theory. We identify the GFN‐xTB method as the most suitable approach for future simulations of functionalized pores for the given purpose, as it is able to produce reaction pathways in very good agreement with density functional theory, even in cases where force fields tend to an extreme overestimation of barrier heights.

Label-Free Bioanalyte Detection from Nanometer to Micrometer Dimensions-Molecular Imprinting and QCMs †

Modern diagnostic tools and immunoassay protocols urges direct analyte recognition based on its intrinsic behavior without using any labeling indicator. This not only improves the detection reliability, but also reduces sample preparation time and complexity involved during labeling step. Label-free biosensor devices are capable of monitoring analyte physiochemical properties such as binding sensitivity and selectivity, affinity constants and other dynamics of molecular recognition. The interface of a typical biosensor could range from natural antibodies to synthetic receptors for example molecular imprinted polymers (MIPs). The foremost advantages of using MIPs are their high binding selectivity comparable to natural antibodies, straightforward synthesis in short time, high thermal/chemical stability and compatibility with different transducers. Quartz crystal microbalance (QCM) resonators are leading acoustic devices that are extensively used for mass-sensitive measurements. Highlight features of QCM devices include low cost fabrication, room temperature operation, and most importantly ability to monitor extremely low mass shifts, thus potentially a universal transducer. The combination of MIPs with quartz QCM has turned out as a prominent sensing system for label-free recognition of diverse bioanalytes. In this article, we shall encompass the potential applications of MIP-QCM sensors exclusively label-free recognition of bacteria and virus species as representative micro and nanosized bioanalytes.

Fluorescent sensor systems based on nanostructured polymeric membranes for selective recognition of Aflatoxin B1

Nanostructured polymeric membranes for selective recognition of aflatoxin B1 were synthesized in situ and used as highly sensitive recognition elements in the developed fluorescent sensor. Artificial binding sites capable of selective recognition of aflatoxin B1 were formed in the structure of the polymeric membranes using the method of molecular imprinting. A composition of molecularly imprinted polymer (MIP) membranes was optimized using the method of computational modeling. The MIP membranes were synthesized using the non-toxic close structural analogue of aflatoxin B1, ethyl-2-oxocyclopentanecarboxylate as a dummy template. The MIP membranes with the optimized composition demonstrated extremely high selectivity towards aflatoxin B1 (AFB1). Negligible binding of close structural analogues of AFB1 - aflatoxins B2 (AFB2), aflatoxin G2 (AFG2), and ochratoxin A (OTA) was demonstrated. Binding of AFB1 by the MIP membranes was investigated as a function of both type and concentration of the functional monomer in the initial monomer composition used for the membranes' synthesis, as well as sample composition. The conditions of the solid-phase extraction of the mycotoxin using the MIP membrane as a stationary phase (pH, ionic strength, buffer concentration, volume of the solution, ratio between water and organic solvent, filtration rate) were optimized. The fluorescent sensor system based on the optimized MIP membranes provided a possibility of AFB1 detection within the range 14-500ngmL^-1 demonstrating detection limit (3Ϭ) of 14ngmL^-1. The developed technique was successfully applied for the analysis of model solutions and waste waters from bread-making plants.