Method for the determination of blood methotrexate by high performance liquid chromatography with online post-column electrochemical oxidation and fluorescence detection

Biomimetic Material for Quantification of Methotrexate Using Sensor Based on Molecularly Imprinted Polypyrrole Film and MWCNT/GCE

This study investigates biomimetic sensors for the detection of methotrexate contaminants in environmental samples. Sensors inspired by biological systems are the focus of this biomimetic strategy. Methotrexate is an antimetabolite that is widely used for the treatment of cancer and autoimmune diseases. Due to the widespread use of methotrexate and its rampant disposal into the environment, the residues of this drug are regarded as an emerging contaminant of huge concern, considering that exposure to the contaminant has been found to lead to the inhibition of some essential metabolic processes, posing serious risks to humans and other living beings. In this context, this work aims to quantify methotrexate through the application of a highly efficient biomimetic electrochemical sensor constructed using polypyrrole-based molecularly imprinted polymer (MIP) electrodeposited by cyclic voltammetry on a glassy carbon electrode (GCE) modified with multi-walled carbon nanotubes (MWCNT). The electrodeposited polymeric films were characterized by infrared spectrometry (FTIR), scanning electron microscopy (SEM), and cyclic voltammetry (CV). The analyses conducted using differential pulse voltammetry (DPV) yielded a detection limit of 2.7 × 10^-9 mol L^-1 for methotrexate, a linear range of 0.01-125 μmol L^-1, and a sensitivity of 0.152 μA L mol^-1. The results obtained from the analysis of the selectivity of the proposed sensor through the incorporation of interferents in the standard solution pointed to an electrochemical signal decay of only 15.4%. The findings of this study show that the proposed sensor is highly promising and suitable for use in the quantification of methotrexate in environmental samples.

Spectrofluorimetric Method for Monitoring Methotrexate in Patients' Plasma Samples and Cell Lysates Using Highly Fluorescent Carbon Dots

For the first time, nitrogen, sulfur, phosphorus, and boron-doped carbon dots (N, S, P, B-codoped CDs) were synthesized through a hydrothermal reaction. The produced CDs were utilized to develop an optical sensor to determine methotrexate (MTX) in cell lysates and patients' plasma samples. Basically, in the presence of MTX, the fluorescence emission of the CD-based probe was quenched. Under optimum conditions, a good proportional relationship was obtained between the quenched fluorescence signal and MTX concentrations from 74.9 ng/mL to 99.9 µg/mL with a limit of detection of 74.9 ng/mL. The developed nanoprobe provided a wide linear range and high accuracy and was successfully utilized in the routine therapeutic drug monitoring of MTX in plasma samples. The obtained results proposed the developed nanoprobe for the on-time and specific detection of MTX in blood samples. As another application, N, S, P, B-codoped CDs were utilized for bioimaging MCF-7 cancer cells and could be proposed as efficient bioimaging agents for tumor cells.

Toxicological Aspects of Methotrexate Intoxication: Concentrations in Postmortem Biological Samples and Autopsy Findings

The aim of this study was the establishment of a UHPLC-QqQ-MS/MS method to determine methotrexate in postmortem biological samples and quantify the postmortem distribution of methotrexate in a case of fatal intoxication of this drug. A volume of 100 μL or 100 mg of postmortem specimens was precipitated with 400 μL of cold methanol and then analyzed using UHPLC-QqQ-MS/MS. The validation parameters of the method were as follows: limit of quantification: 0.1−1.0 ng/mL or ng/g, coefficient of determination: >0.998 (R2), matrix effect, intra- and inter-day accuracies and precisions: not greater than 13.6%, 14.8% and 17.4%, respectively. The recoveries were: 89.0−113.6%. The postmortem distribution studies revealed methotrexate concentrations as follows: blood—7.2 ng/mL, vitreous humor—0.8 ng/mL, liver—43.7 ng/g, kidney—20.6 ng/g, bone marrow—29.9 ng/g, lumbar vertebra—20.0 ng/g. The highest concentrations of methotrexate after poisoning were found in the tissues with the most rapidly dividing cells. The method described is simple, precise and selective. Methotrexate concentrations can be routinely determined in postmortem specimens. Determination of methotrexate in the postmortem biological material is possible after a few days of intensive treatment.

Ultrasensitive fluorescence detection of antitumor drug methotrexate based on a terbium-doped silica dendritic probe

A novel strategy was developed for the detection of methotrexate (MTX) via the quenching effect of MTX on the fluorescence intensity of terbium-doped dendritic silica particles (Tb@KCC-1). The fluorescence intensity of Tb@KCC-1 can be effectively quenched by MTX at 546 nm under an excitation wavelength of 233 nm. The quenched fluorescence is proportional to the amount of MTX in both plasma and exhaled breath condensate (EBC) samples. Under the optimal conditions, the linear dynamic ranges of the developed method were 44 nM to 2.2 μM for EBC, 44 nM to 0.22 μM and 0.22-2.2 μM for plasma samples. The limit of detection (LOD) and limit of quantification (LOQ) in both plasma and EBC media are 35 and 116 nM, respectively. The developed method has the benefits of fast analysis time, simple approach, high specificity, and sensitivity for the detection of MTX in both media. This nanoprobe has been successfully utilized for the quantification of MTX in patients' plasma and spiked EBC samples, proving the applicability of the nanoprobe for MTX detection in real samples.

Methotrexate Polyglutamates Analysis by Chromatography Methods in Biological Matrices: A Review

Methotrexate (MTX) is used as an immunosuppressant and antineoplastic drug in clinical practice. MTX is a parent drug and converts to MTX polyglutamates (MTXPGs) to exhibit its biological activity. Clinical studies found that MTXPG levels were associated with MTX response and toxicities, especially at low doses. Due to huge variance of MTX response and toxicities between individuals, therapeutic drug monitoring is necessary for its use in individualized therapy. Various chromatography methods coupled with ultraviolet-visible detector, fluorescence detector and mass spectrometry have been reported for MTXPG analysis in various biological matrices. The aim of this paper is to review the chromatographic based methods for the measurement of total and/or individual MTXPGs. We searched Embase, Science Direct and PubMed databases using "methotrexate polyglutamate" and "chromatography" as search terms, and found 745 articles. Of those, 14 articles were extracted for this study. The key steps for method development (sample pretreatment, parameter optimization of liquid chromatography and mass spectrometry, selection of internal standard) and validation (lower limit of quantitation, accuracy, precision, recovery, matrix effect and stability) were analyzed and summarized, which might be helpful for researchers to develop their own methods.

Quantitative analysis of human blood serum using vibrational spectroscopy

•

State of the art of quantitative Vibrational Spectroscopic analysis of human blood serum is reviewed.

•

Technical considerations for infrared absorption and Raman analysis are discussed.

•

Quantitative analyses of Endogenous and Exogenous constituents are presented.

•

The potential for clinical translation of spectroscopic serology is argued.

Analysis of bodily fluids using vibrational spectroscopy has attracted increasing attention in recent years. In particular, infrared spectroscopic screening of blood products, particularly blood serum, for disease diagnostics has been advanced considerably, attracting commercial interests. However, analyses requiring quantification of endogenous constituents or exogenous agents in blood are less well advanced. Recent advances towards this end are reviewed, focussing on infrared and Raman spectroscopic analyses of human blood serum. The importance of spectroscopic analysis in the native aqueous environment is highlighted, and the relative merits of infrared absorption versus Raman spectroscopy are considered, in this context. It is argued that Raman spectroscopic analysis is more suitable to quantitative analysis in liquid samples, and superior performance for quantification of high and low molecular weight components, is demonstrated. Applications for quantitation of viral loads, and therapeutic drug monitoring are also discussed.

Analytical methodologies for determination of methotrexate and its metabolites in pharmaceutical, biological and environmental samples

Methotrexate (MTX) is a folate antagonist drug used for several diseases, such as cancers, various malignancies, rheumatoid arthritis (RA) and inflammatory bowel disease. Due to its structural features, including the presence of two carboxylic acid groups and its low native fluorescence, there are some challenges to develop analytical methods for its determination. MTX is metabolized to 7-hydroxymethotrexate (7-OH-MTX), 2,4-diamino-N10-methylpteroic acid (DAMPA), and the active MTX polyglutamates (MTXPGs) in the liver, intestine, and red blood cells (RBCs), respectively. Additionally, the drug has a narrow therapeutic range; hence, its therapeutic drug monitoring (TDM) is necessary to regulate the pharmacokinetics of the drug and to decrease the risk of toxicity. Due to environmental toxicity of MTX; its sensitive, fast and low cost determination in workplace environments is of great interest. A large number of methodologies including high performance liquid chromatography equipped with UV-visible, fluorescence, or electrochemical detection, liquid chromatography-mass spectroscopy, capillary electrophoresis, UV-visible spectrophotometry, and electrochemical methods have been developed for the quantitation of MTX and its metabolites in pharmaceutical, biological, and environmental samples. This paper will attempt to review several published methodologies and the instrumental conditions, which have been applied to measure MTX and its metabolites within the last decade.

Raman spectroscopy as a potential tool for label free therapeutic drug monitoring in human serum: the case of busulfan and methotrexate

A methodology is proposed, based on Raman spectroscopy coupled with multivariate analysis, to determine the Limit of Detection (LOD) and Limit of Quantification (LOQ) for therapeutic drug monitoring in human serum, using the examples of Busulfan and Methotrexate.

Liquid chromatographic methods for the therapeutic drug monitoring of methotrexate as clinical decision support for personalized medicine: A brief review

Methotrexate (MTX) is an antifolate drug used for several diseases. Depending on the disease, MTX can be administered at low dose (LDMTX) in some autoimmune diseases, like rheumatoid arthritis, or at high dose (HDMTX) in some cancers, such as acute lymphoblastic leukemia. After absorption, MTX is metabolized in the liver to 7-hydroxymethotrexate and in the intestine to 2,4-diamino-N10-methylpteroic acid (DAMPA). Moreover, inside red blood cells, MTX is converted to active metabolites, MTX polyglutamates (MTXPGs), contributing to its pharmacodynamics. Owing to its narrow therapeutic range, and inter- and intra-patient variability, either noneffectiveness and/or toxicity may occur. Because of the existence of a relationship between drug therapeutic outcome and its systemic concentration, therapeutic drug monitoring (TDM) may ensure the effectiveness and safety of MTX use. In order to monitor the optimization of patient clinical response profile, several analytical methods have been described for TDM in biological samples. These include liquid chromatography (LC) coupled with ultraviolet detection, fluorescence detection or mass spectrometry, each one presenting advantages and drawbacks. This paper reviews the most commonly used techniques for sample preparation and critically discusses the current LC methods applied for the TDM of MTX in biological samples, at LDMTX and HDMTX.

Simultaneous Quantification of Baricitinib and Methotrexate in Rat Plasma by LC-MS/MS: Application to a Pharmacokinetic Study

Efficacy assessments using a combination of baricitinib and methotrexate necessitate the development of an analytical method for the determination of both drugs in plasma with precision. A high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed for the simultaneous determination of baricitinib and methotrexate in rat plasma. Extraction of baricitinib, methotrexate, and tolbutamide (internal standard; IS) from 50 µL of rat plasma was carried out by protein precipitation with methanol. Chromatographic separation of the analytes was performed on the YMC pack ODS AM (150 mm × 4.6 mm, 5 µm) column under gradient conditions with methanol: 2.0 mM ammonium acetate buffer as the mobile phases at a flow rate of 1 mL/min. The precursor ion and product ion transition for both analytes and IS were monitored on a triple quadrupole mass spectrometer, operated with selective reaction monitoring in positive ionization mode. The method was validated over a concentration range of 0.5–250.00 ng/mL for baricitinib and methotrexate. Mean extraction recoveries for baricitinib, methotrexate, and IS of 86.8%, 89.4%, and 91.8% were consistent across low, medium, and high QC levels, respectively. Precision and accuracy at low, medium, and high quality control levels were less than 15% across the analytes. Benchtop, wet, freeze-thaw, and long-term stability were evaluated for both of the analytes. The analytical method was applied to support the pharmacokinetic study of simultaneous estimation of baricitinib and methotrexate in Wistar rats. Assay reproducibility was demonstrated by reanalysis of 18 incurred samples

PBPK model of methotrexate in cerebrospinal fluid ventricles using a combined microdialysis and MRI acquisition

The objective of the study was to evaluate the distribution of methotrexate (MTX) in cerebrospinal fluid (CSF) lateral ventricles and in cisterna magna after 3rd intraventricular CSF administration in a rabbit model. MTX or gadolinium chelate (Gd-DOTA) was administered in the 3rd ventricle with a local microdialysis to study the pharmacokinetics at the site of administration and with a simultaneous magnetic resonance imaging (MRI) acquisition in the 3rd ventricle, the lateral ventricles and in the cisterna magna. A specific CSF Physiologically Based Pharmacokinetic (PBPK) model was then extrapolated for MTX from Gd-DOTA data. The relative contribution of elimination and distribution processes to the overall disposition of MTX and Gd-DOTA in the 3rd ventricle was similar (i.e., around 60% for CLE and 40% for CLI) suggesting that Gd-DOTA was a suitable surrogate marker for MTX disposition in ventricular CSF. The PBPK predictions for MTX both in CSF of the 3rd ventricle and in plasma were in accordance with the in vivo results. The present study showed that the combination of local CSF microdialysis with MRI acquisition of the brain ventricles and a PBPK model could be a useful methodology to estimate the drug diffusion within CSF ventricles after direct brain CSF administration. Such a methodology would be of interest to clinicians for a rationale determination and optimization of drug dosing parameters in the treatment of leptomeningeal metastases.

Optimized high performance liquid chromatography-ultraviolet detection method using core-shell particles for the therapeutic monitoring of methotrexate

Methotrexate (MTX) is an antineoplastic drug, and due to its high toxicity, the therapeutic drug monitoring is strictly conducted in the clinical practice. The chemometric optimization and validation of a high performance liquid chromatography (HPLC) method using core-shell particles is presented for the determination of MTX in plasma during therapeutic monitoring. Experimental design and response surface methodology (RSM) were applied for the optimization of the chromatographic system and the analyte extraction step. A Poroshell 120 EC-C18 (3.0 mm×75 mm, 2.7 μm) column was used to obtain a fast and efficient separation in a complete run time of 4 min. The optimum conditions for the chromatographic system resulted in a mobile phase consisting of acetic acid/sodium acetate buffer solution (85.0 mM, pH=4.00) and 11.2% of acetonitrile at a flow rate of 0.4 mL/min. Selectivity, linearity, accuracy and precision were demonstrated in a range of 0.10-6.0 µM of MTX. The application of the optimized method required only 150 µL of patient plasma and a low consumption of solvent to provide rapid results.

Characteristics of pemetrexed transport by renal basolateral organic anion transporter hOAT3

PURPOSE

Pemetrexed transport by human organic anion transporters, hOAT1 (SLC22A6) and hOAT3 (SLC22A8), were characterized in comparison with methotrexate.

METHODS

Accumulation of pemetrexed and methotrexate in hOAT1- and hOAT3-expressing cells were evaluated. Pemetrexed and methotrexate were determined by HPLC. Kinetic parameters were calculated by Eadie-Hofstee plot.

RESULTS

When HEK-hOAT3 and -hOAT1 cells were incubated with 100 µM pemetrexed for 30 min, pemetrexed was accumulated at 14- and 1.7-fold greater than that in control cells, respectively. Pemetrexed and methotrexate transport by hOAT3 was saturated at high concentrations with apparent Km values 28.2 µM and 76.6 µM, respectively. In addition, intrinsic activity (Vmax/Km) of pemetrexed and methotrexate transport by hOAT3 was 4.82 and 0.42 µl/min/mg protein, respectively, suggesting 11-fold higher transport of pemetrexed than methotrexate by hOAT3. Furthermore, loxoprofen, ibuprofen, pravastatin, and cefazolin, transport substrates of hOAT3, inhibited pemetrexed transport by hOAT3 with IC50 values, 34.2, 27.9, 76.3 and 650 µM, respectively.

CONCLUSIONS

Pemetrexed is a superior substrate to methotrexate for hOAT3. Loxoprofen, ibuprofen, and cefazolin could cause drug-drug interactions when attaining high blood concentrations.

Identification of impurities in methotrexate drug substances using high-performance liquid chromatography coupled with a photodiode array detector and Fourier transform ion cyclotron resonance mass spectrometry

RATIONALE

Methotrexate (MTX) is an antineoplastic therapeutic medicine that acts as an antimetabolite of folic acid. In this study we identified the impurities in MTX drug substances produced by different manufacturers and in different batches using high-performance liquid chromatography coupled with a photodiode array detector and Fourier transform ion cyclotron resonance mass spectrometry (HPLC-PDA/FTICR-MS).

METHODS

MTX and its impurities were separated on a Restek Pinnacle II C18 column (250 × 4.6 mm, 5 µm) with a gradient elution system composed of 0.2% formic acid and acetonitrile at a flow rate of 1.0 mL/min. Ultraviolet (UV) detection was set at 305 nm. Mass detection was carried out using FTICR-MS with full-scan mass analysis at a resolving power of 100 000 coupled with multiple-stage mass analysis using a parent list of compounds.

RESULTS

Fifteen impurities were detected in MTX drug substances, and their structures were predicted from using HPLC-PDA/FTICR-MS data, including their UV spectra, high-resolution mass spectrometry (HRMS), fragmentation patterns, and MS(n) spectra. Ten of the impurities detected in the MTX drug substances are reported for the first time. There was a high abundance of esterified impurities in some batches of MTX drug substances, over the identification threshold of International Conference on Harmonization (ICH) guidelines, which requires particular attention.

CONCLUSIONS

This paper describes a HPLC-PDA/FTICR-MS method to profile and identify impurities in MTX drug substances. The results suggest that HPLC-PDA/FTICR-MS is a valuable analytical technique for the rapid identification of impurities.

On-line coupling of derivatization with pre-concentration to determine trace levels of methotrexate

A new simple, sensitive and precise green analytical procedure using an automated packed-reactor derivatization technique coupled with on-line solid-phase enrichment (SPEn) has been developed and evaluated to determine trace levels of methotrexate (MTX). The method was based on injection of MTX into a flowing stream of phosphate buffer (0.04 M, pH 3.4), carried through the packed oxidant reactor of Cerium (IV) trihydroxyhydroperoxide for oxidative cleavage of the drug into highly fluorescent product, 2,4-diaminopteridine-6-carboxylic acid, followed by SPEn on a head of short ODS column (10 mm×4.6 mm i.d., 5 μm particle size). The flow rate was 0.25 mL/min and packed reactor temperature was 40 °C. The trapped product was back-flush eluted from the ODS column to the detector by column-switching with an environmentally friendly mobile phase consisting of ethanol and phosphate buffer (0.04 M, pH 3.4) in the ratio of 5:95 (v/v). The eluent was monitored at emission and excitation wavelengths of 460 and 360 nm, respectively. The calibration curve was linear over the concentration range of 1.25–50 ng/mL with a detection limit of 0.08 ng/mL. The method was successfully applied to determine MTX in pharmaceutical formulations with mean percentage recovery ranging from 99.48 to 99.60.

Methotrexate-loaded SLNs prepared by coacervation technique: in vitro cytotoxicity and in vivo pharmacokinetics and biodistribution

AIM

Recently, 'coacervation' has been proposed as a new method to prepare fatty acid solid lipid nanoparticles (SLNs). The aim of this work was to encapsulate methotrexate, a hydrophilic anticancer drug, within SLNs obtained by coacervation, through hydrophobic ion pairing and to evaluate the potential efficacy in in vitro and in vivo breast tumor models of drug-loaded nanoparticles.

MATERIALS & METHODS

Methotrexate-loaded SLN efficacy was evaluated in vitro towards MCF-7 and Mat B-III cell lines (human and murine breast tumor cell lines). Pharmacokinetics of drug-loaded nanoparticles was evaluated in male Wistar rats and biodistribution in a breast tumor model (Mat B-III) in female Fisher rats.

RESULTS

Drug-loaded SLNs showed an increased cytotoxicity towards MCF-7 and Mat B-III cell lines compared with free drug. After intravenous administration, drug plasmatic concentration was increased and a major drug accumulation within neoplastic tissue was shown when the drug was loaded in SLNs, compared with drug solution alone. Encapsulation of the drug within nanoparticles also increased its oral uptake after duodenal administration.

CONCLUSION

SLNs are promising vehicles for the delivery of methotrexate, since an increase of efficacy in vitro and a preferential accumulation in breast cancer in vivo were shown. Original submitted 29 October 2010; Revision submitted 19 March 2011.

Development and validation of a liquid chromatography method for simultaneous determination of three process-related impurities: yeastolates, triton X-100 and methotrexate

Yeastolates, triton X-100 (TX-100) and methotrexate (MTX) are common process-related impurities (PRI) in cell-based bioproduction of many active biopharmaceuticals. In this study, a reverse phase high performance liquid chromatography (RP-HPLC) method coupled with ultraviolet (UV) detection was developed for simultaneous determination and quantitation of these impurities. The chromatographic separation was achieved using a Jupiter C4 column and analyses of yeastolates, TX-100 and MTX were monitored at 257, 280 and 302 nm, respectively. The method was further validated with respect to selectivity, linearity, limit of detection (LOD), limit of quantitation (LOQ), precision and accuracy. The limits of quantitation for yeastolates, TX-100 and MTX were determined to be 27 ppm, 10 ppm and 41 ppb, respectively. Finally, the suitability of the method for analyses of recombinant human hyaluronidase (rHuPH20) in-process (viral inactivation, QFF, PS, APB and CHT filtered, final viral filtrate) and final manufacturing materials was demonstrated, and trace levels of yeastolates, TX-100 and MTX were reliably measured except for three matrices early in the purification process in which TX-100 was not accurately determined due to interfering effects.

Ultrafast selective quantification of methotrexate in human plasma by high-throughput MALDI-isotope dilution mass spectrometry

BACKGROUND

A new analytical MS method using isotope dilution combined with MALDI-triple quadrupole MS/MS has been developed and validated for the determination of methotrexate and 7-hydroxymethotrexate in plasma. Methotrexate, methotrexate-d3, 7-hydroxymethotrexate and 7-hydroxymethotrexate-d3 were monitored by selected reaction monitoring using the transitions m/z 455.2→308.2, 458.2→311.2, 471.2→324.2 and 474.2→327.2 for methotrexate, methotrexate-d3, 7-hydroxymethotrexate and 7-hydroxymethotrexate-d3, respectively.

RESULTS

The LLOQ was 1 nmol/l for methotrexate and 7-hydroxymethotrexate while the limit of detection was 0.3 nmol/l for both analytes. The new developed method was cross-validated by a fluorescence polarization immunoassay and tested for its clinical feasibility by measuring plasma samples from patients suffering from acute lymphoblastic leukemia. Plasma methotrexate concentrations ranged between 66.0 and 954 nmol/l and observed 7-hydroxymethotrexate/methotrexate ratios ranged between 0.1 and 32.4, respectively.

CONCLUSION

The new method showed comparable analytical performances as the fluorescence polarization immunoassay, but analyte specificity and sensitivity of the newly developed method were significantly better.

Quenched phosphorescence as alternative detection mode in the chiral separation of methotrexate by electrokinetic chromatography

Quenched phosphorescence was used, for the first time, as detection mode in the chiral separation of methotrexate (MTX) enantiomers by electrokinetic chromatography. The detection is based on dynamic quenching of the strong emission of the phosphorophore 1-bromo-4-naphthalene sulfonic acid (BrNS) by MTX under deoxygenated conditions. The use of a background electrolyte with 3 mg/mL 2-hydroxypropyl-β-cyclodextrin and 20% MeOH in 25 mM phosphate buffer (pH 7.0) and an applied voltage of 30 kV allowed the separation of L-MTX and its enantiomeric impurity D-MTX with sufficient resolution. In the presence of 1 mM BrNS, a detection limit of 3.2 × 10(-7) M was achieved, about an order of magnitude better than published techniques based on UV absorption. The potential of the method was demonstrated with a degradation study and an enantiomeric purity assessment of L-MTX. Furthermore, L-MTX was determined in a cell culture extract as a proof-of-principle experiment to show the applicability of the method to biological samples.

Determination of quercetin and resveratrol in whole blood--implications for bioavailability studies

Resveratrol (trans-3,4',5-trihydroxystilbene) and quercetin (3,3’,4’,5,7-pentahydroxyflavone) are two naturally occurring polyphenols with the potential to exert beneficial health effects. Since their low bioavailability is a major obstacle to biomedical applications, efforts are being made to improve their absorption and slow down phase II metabolism. An accurate evaluation of the corresponding levels in the bloodstream is important to assess delivery strategies, as well as to verify claims of efficacy based on in vitro results. In the present work we have optimized a simple method ensuring complete stabilization and extraction of resveratrol and quercetin from whole blood. The suitability of different protocols was evaluated by measuring the recovery of polyphenol and internal standard from spiked blood samples via HPLC/UV analysis. The optimized procedure ensured a satisfactory recovery of both internal standards and compounds. Comparing plasma and whole blood, up to 76% of the analyte, being associated with the cellular fraction, was unaccounted for when examining only plasma. This indicates the importance of analysing whole blood rather than plasma to avoid underestimating polyphenol absorption in bioavailability studies.

A novel high-performance liquid chromatography/mass spectrometry method for improved selective and sensitive measurement of methotrexate polyglutamation status in human red blood cells

The folate antagonist methotrexate is commonly used in low dose for treatment of rheumatoid arthritis and juvenile idiopathic arthritis. Therapeutic effects are attributed to intracellular levels of various methotrexate polyglutamates. The present methodology, combining a simple preparation step with ion-pairing reversed-phase liquid chromatography and electrospray ionization mass spectrometry, is suitable for the measurement of methotrexate and its polyglutamates(2-7), in human red blood cells. Sample preparation consists of perchloric acid protein precipitation followed by solid-phase extraction. Baseline separation of all analytes was achieved within 10 min using a Phenomenex Synergy C18 column together with a gradient solvent program obtained from blending acetonitrile with pH 7.5, 5 mM aqueous dimethylhexylamine. Seven methotrexate polyglutamates were detected using multiple reaction monitoring, with the mass spectrometer operating in positive ion mode. Using 20 microL injection volumes, limits of detection were 2.5 nM for individual methotrexate polyglutamates, while large volume (100 microL) injections led to detection limits of 0.5 nM and linear calibration from 0.5 to 100 nM for individual analytes. Finally, the presented methodology was applied for the analysis of methotrexate and its polyglutamates in red blood cells obtained from patients being treated for juvenile idiopathic arthritis with methotrexate. Significantly, the methodology proved suitable for determination of long-chain methotrexate polyglutamates(5-7) and further, appears to be superior with respect to sensitivity, selectivity and speed as compared to all previously described approaches.

Molecularly imprinted solid-phase extraction combined with electrochemical oxidation fluorimetry for the determination of methotrexate in human serum and urine

The method of synthesis and evaluation of molecularly imprinted polymers was reported. As a selective solid-phase extraction sorbent, the polymers were coupled with electrochemical fluorimetry detection for the efficient determination of methotrexate in serum and urine. Methotrexate was preconcentrated in the molecularly imprinted solid-phase extraction microcolumn packed with molecularly imprinted polymers, and then eluted. The eluate was detected by fluorescence spectrophotometer after electrochemical oxidation. The conditions of preconcentration, elution, electrochemical oxidation and determination were carefully studied. Under the selected experimental conditions, the calibration graph of the fluorescence intensity versus methotrexate concentration was linear from 4x10(-9) g mL(-1) to 5x10(-7) g mL(-1), and the detection limit was 8.2x10(-10) g mL(-1) (3sigma). The relative standard deviation was 3.92% (n=7) for 1x10(-7) g mL(-1) methotrexate. The experiments showed that the selectivity and sensitivity of fluorimetry could be greatly improved by the proposed method. This method has been successfully applied to the determination of methotrexate. At the same time, the binding characteristics of the polymers to the methotrexate were evaluated by batch and dynamic methods.