Sensitive and rapid liquid chromatography/tandem mass spectrometric assay for the quantification of chloroquine in dog plasma

Electrochemical Determination of Chloroquine Phosphate in Real Samples Using a Diresorcinate-1,10-phenanthrolinecobalt(II)-Modified Glassy Carbon Electrode

Chloroquine phosphate (CQP) is used for malaria treatment. As it is facing increasing resistance, it needs continuous monitoring using sensitive and specific detection methods. In this work, a voltammetric sensor was prepared by electropolymerization of a diresorcinate-1,10-phenanthrolinecobalt(II) complex on a glassy carbon electrode (poly(DHRPCo)/GCE) which was followingly characterized. Compared with a bare GCE, CQP showed single well shaped irreversible oxidative peak at the poly(DHRPCo)/GCE. The peak current showed excellent linearity with CQP concentration in the range of 0.005-300.0 μm with a detection limit of 0.39 nm. The response of CQP at poly(DHRPCo)/GCE was not influenced by the presence of amoxicillin, ciprofloxacillin and paracetamol in addition to its high stability and reproducibility. It was applied for detection of CQP in various real samples, including three brands of tablets, human blood serum, and urine samples. The detected amount in tablets were in the range 98.4-103.2 % of their labeled value. Spike recovery results in human blood serum, urine, and tablet samples were 99.35-100.28 %, 99.03-100.32 %, and 98.40-100.41 %, respectively. Interference recovery results with less than 4.60 % error, the lower limit of detection and the wider dynamic range than most of the previously reported methods validate the potential applicability of the proposed method for CQP determination in various real samples with complex matrices.

HPLC methods for choloroquine determination in biological samples and pharmaceutical products

OBJECTIVE

Review and assess pharmaceutical and clinical characteristics of chloroquine including high-performance liquid chromatography (HPLC)-based methods used to quantify the drug in pharmaceutical products and biological samples.

EVIDENCE ACQUISITION

A literature review was undertaken on the PubMed, Science Direct, and Scielo databases using the following keywords related to the investigated subject: 'chloroquine', 'analytical methods', and 'HPLC'.

RESULTS

For more than seven decades, chloroquine has been used to treat malaria and some autoimmune diseases, such as lupus erythematosus and rheumatoid arthritis. There is growing interest in chloroquine as a therapeutic alternative in the treatment of HIV, Q fever, Whipple's disease, fungal, Zika, Chikungunya infections, Sjogren's syndrome, porphyria, chronic ulcerative stomatitis, polymorphic light eruption, and different types of cancer. HPLC coupled to UV detectors is the most employed method to quantify chloroquine in pharmaceutical products and biological samples. The main chromatographic conditions used to identify and quantify chloroquine from tablets and injections, degradation products, and metabolites are presented and discussed.

CONCLUSION

Research findings reported in this article may facilitate the repositioning, quality control, and biological monitoring of chloroquine in modern pharmaceutical dosage forms and treatments.

Development of an easy and rapid analytical method for the extraction and preconcentration of chloroquine phosphate from human biofluids prior to GC-MS analysis

A vortex assisted spraying based fine droplet formation liquid phase microextraction (VA-SFDF-LPME) method was developed to determine chloroquine phosphate at trace levels in human serum, urine and saliva samples by gas chromatography–mass spectrometry (GC–MS) with single quadrupole mass analyzer. In the first part, several liquid phase microextraction (LPME) and magnetic solid phase extraction (MSPE) methods were compared to each other in order to observe their extraction ability for the analyte. VA-SFDF-LPME method was selected as an efficient and easy extraction method due to its higher extraction efficiency. Optimization studies were carried out for the parameters such as extraction solvent type, sodium hydroxide volume/concentration, sample volume, spraying number and mixing type/period. Tukey's method based on post hoc test was applied to all experimental data for the selection of optimum values. Optimum extraction parameters were found to be 12 mL initial sample volume, two sprays of dichloromethane, 0.75 mL of 60 g/kg sodium hydroxide and 15 s vortex. Under the optimum conditions, limit of detection and quantification (LOD and LOQ) were calculated as 2.8 and 9.2 μg/kg, respectively. Detection power of the GC–MS system was increased by approximately 317 folds with the developed extraction/preconcentration method. The applicability and accuracy of the proposed method was evaluated by spiking experiments and percent recovery results for human urine, serum and saliva samples were found in the range of 90.9% and 114.0% with low standard deviation values (1.9–9.4).

Analytical Methods on Determination in Pharmaceuticals and Biological Materials of Chloroquine as Available for the Treatment of COVID-19

With the outbreak caused by the severe acute respiratory syndrome coronavirus (COVID-19), people's health and existing economies on a global scale are seriously threatened. Currently, most of the countries all over the world are studying extensively to better understand the antimalarial chloroquine (CQ) and hydroxychloroquine (HCQ) for therapeutic purposes due to the COVID-19 outbreak. However, CQ and HCQ can have serious side effects, from psychiatric effects to sudden death. Therefore, a faster and more effective detection method is needed to monitor drug concentrations. In this review, a large study was conducted on the detection techniques and quantitative determination methods of CQ and its related metabolites. In this review, chromatography, electrophoresis, electroanalytical, spectroscopic, and immunological methods for CQ and related metabolites are discussed extensively. It is hoped that a better understanding of the CQ used for therapeutic purposes in the COVID-19 outbreak will be provided.

LC-MS/MS method for the simultaneous analysis of seven antimalarials and two active metabolites in dried blood spots for applications in field trials: Analytical and clinical validation

In epidemiological studies, antimalarials measurements in blood represent the best available marker of drugs exposure at population level, an important driver for the emergence of drug resistance. We have developed a liquid chromatography-tandem mass spectrometry method (LC-MS/MS) for the simultaneous quantification of 7 frequently used antimalarials (amodiaquine, chloroquine, quinine, sulfadoxine, pyrimethamine, mefloquine, lumefantrine) and 2 active metabolites (N-desethyl-amodiaquine, desbutyl-lumefantrine) in 10-μl dried blood spots (DBS). This sampling approach is suitable for field studies wherein blood samples processing, transportation and storage are problematic. Sample preparation included extraction from a 3 mm-disk punched out of the DBS with 100-μl of methanol + 1% formic acid containing deuterated internal standards for all drugs. Good performances were achieved in terms of trueness (-12.1 to +11.1%), precision (1.4-15.0%) and sensitivity, with lower limits of quantification comprised between 2 ng/ml (sulfadoxine) and 20 ng/ml (chloroquine, quinine, pyrimethamine, mefloquine, lumefantrine and desbutyl-lumefantrine). All analytes were stable in DBS kept for 24 h at room temperature and at 37 °C. The developed assay was applied within the frame of a pharmacokinetic study including 16 healthy volunteers who received a single dose of artemether-lumefantrine. Lumefantrine concentrations in plasma and in DBS were highly correlated (R = 0.97) at all time points, confirming the assumption that lumefantrine concentrations determined in DBS confidently reflect blood concentrations. The blood/plasma ratio of 0.56 obtained using the Bland-Altman approach (and corresponding to the slope of the linear regression) is in line with very low penetration of lumefantrine into red blood cells. This sensitive multiplex LC-MS/MS assay enabling the simultaneous analysis of antimalarials in DBS is suitable for epidemiological studies in field conditions.

Development and validation of an HILIC-MS/MS method by one-step precipitation for chloroquine in miniature pig plasma

Background:

Quantification of polar compounds such as chloroquine by revered-phase LC is a challenge because of poor retention and silanol interactions with stationary phase. Strong ion-pairing reagents added to mobile phases to improve reversed-phase retention and improve peak shape can be harmful for MS.

Results:

This new approach provides a rapid and sensitive method for the detection of chloroquine using hydrophilic interaction LC coupled to MS/MS (HILIC–MS/MS). Ammonium formate and formic acid were added to mobile phase to attain good peak shapes and the salified chloroquine as well retained in an HILIC column. Linearity, intra- and inter-day precision, accuracy, recovery, matrix effect and stability were evaluated during the validation process.

Conclusion:

The validated method has been successfully used in a PK study in miniature pigs, and paves way for future development.

Micelle Based Spectrofluorimetric Determination of Chloroquine Phosphate in Commercial Formulation and Human Plasma

Simple, sensitive and economic spectrofluorimetric method has been described for the determination of chloroquine phosphate in pure form, pharmaceutical formulations and spiked human plasma. In the developed method, fluorescence intensity of chloroquine phosphate was enhanced with 0.4 M sodium dodecyl sulfate in basic media of pH 10 at room temperature. The excitation and emission wavelengths of the fluorescent chloroquine phosphate are 330 nm and 369 nm respectively. The developed approach has a broad linear range (0.03–5 μg mL−1) with a correlation coefficient of 0.9976. The limit of detection (LOD) and limit of quantification (LOQ) was found to be 3.38 × 10−3 μg mL−1 and 1.12 × 10−2 μg mL−1 respectively. The common additives and co-administered medications were investigated for their interferences effect in the assay. The method was validated statistically through recovery studies and successfully applied to chloroquine phosphate determination in bulk powder, pharmaceutical preparation and spiked human plasma samples. The percent recoveries were found to be in the range of 99.42–100.46 % for bulk powder, 97.48–101.21 % for pharmaceutical formulations and 96.49–98.48 % for spiked human plasma.

Chloroquine-N-oxide, a major oxidative degradation product of chloroquine: identification, synthesis and characterization

Chloroquine (CQ) (1) which has endured as one of the most powerful antimalarial drugs was subjected to oxidative stress conditions and the degradation profile was studied. The oxidative stress condition of CQ furnished one major degradation product along with other minor degradation products. The unknown major degradation product was identified in HPLC and pure impurity was isolated using column chromatography. The structure of this major product was elucidated using UV, FT-IR, (1)H NMR, (13)C NMR, 2D NMR (HSQC) and mass spectral data. Based on the results obtained from the different spectroscopic studies, it was confirmed that the N-oxide was formed at the tertiary amine nitrogen instead of the pyridine nitrogen. Subsequently, an efficient and simple synthetic approach was developed for the synthesis of chloroquine-N-oxide using a work-up procedure that does not require chromatography techniques for further purification. It was observed that the spectral data of the isolated degradation product coincided appropriately with the synthesized product spectral data.

Analysis of chloroquine and metabolites directly from whole-body animal tissue sections by liquid extraction surface analysis (LESA) and tandem mass spectrometry

The rapid and direct analysis of the amount and spatial distribution of exogenous chloroquine (CHQ) and CHQ metabolites from tissue sections by liquid extraction surface sampling analysis coupled with tandem mass spectrometry (LESA-MS/MS) was demonstrated. LESA-MS/MS results compared well with previously published CHQ quantification data collected by organ excision, extraction and fluorescent detection. The ability to directly sample and analyze spatially resolved exogenous molecules from tissue sections with minimal sample preparation and analytical method development has the potential to facilitate the assessment of target tissue penetration of pharmaceutical compounds, to establish pharmacokinetic/pharmacodynamic relationships, and to complement established pharmacokinetic methods used in the drug discovery process during tissue distribution assessment.

Chloroquine administration does not prevent Nipah virus infection and disease in ferrets

Hendra virus and Nipah virus, two zoonotic paramyxoviruses in the genus Henipavirus, have recently emerged and continue to cause sporadic disease outbreaks in humans and animals. Mortality rates of up to 75% have been reported in humans, but there are presently no clinically licensed therapeutics for treating henipavirus-induced disease. A recent report indicated that chloroquine, used in malaria therapy for over 70 years, prevented infection with Nipah virus in vitro. Chloroquine was assessed using a ferret model of lethal Nipah virus infection and found to be ineffective against Nipah virus infection in vivo.