Simultaneous measurement of pazufloxacin, ciprofloxacin, and levofloxacin in human serum by high-performance liquid chromatography with fluorescence detection

Preanalytical Stability of 13 Antibiotics in Biological Samples: A Crucial Factor for Therapeutic Drug Monitoring

The stability of antibiotic preanalytical samples is a critical factor in therapeutic drug monitoring (TDM), a practice of undoubted importance for the proper therapeutic use of antibiotics, especially in complex management patients, such as pediatrics. This review aims to analyze the data in the literature regarding the preanalytical stability of some of the antibiotics for which TDM is most frequently requested. The literature regarding the preanalytical stability of amikacin, ampicillin, cefepime, ceftazidime, ciprofloxacin, daptomycin, gentamicin, levofloxacin, linezolid, meropenem, piperacillin, teicoplanin, and vancomycin in plasma, serum, whole blood, and dried blood/plasma spot samples was analyzed. Various storage temperatures (room temperature, 4 °C, -20 °C, and -80 °C) and various storage times (from 1 h up to 12 months) as well as subjecting to multiple freeze-thaw cycles were considered. The collected data showed that the non-beta-lactam antibiotics analyzed were generally stable under the normal storage conditions used in analytical laboratories. Beta-lactam antibiotics have more pronounced instability, particularly meropenem, piperacillin, cefepime, and ceftazidime. For this class of antibiotics, we suggest that storage at room temperature should be limited to a maximum of 4 h, storage at 2-8 °C should be limited to a maximum of 24 h, and storage at -20 °C should be limited to a maximum of 7 days; while, for longer storage, freezing at -80 °C is suggested.

Green Automated Solid Phase Extraction to Measure Levofloxacin in Human Serum via Liquid Chromatography with Fluorescence Detection for Pharmacokinetic Study

A simple, selective, rapid, sensitive and less costly green automated solid phase extraction bio-analytical high-performance liquid chromatographic-based technique with fluorescence detection (Aut-SPE-BA-HPLC-FL) for the quantification of levofloxacin in human serum samples has been developed and validated. The serum samples were loaded into the chromatographic system without prior treatment and then injected into short (20 mm × 4.6 mm, 20 µm) protein-coated (PC) µBondapak CN (µBCN) silica pre-column (PC-µBCN-pre-column). Levofloxacin was retained and pre-concentrated on the head of the PC-µBCN-pre-column, while proteins and other polar components were eliminated using phosphate buffer saline (PBS), pH 7.4, as the first mobile phase in the extraction step. Levofloxacin is then transferred to the analytical column; ZORBAX Eclipse XDB-C18 (150 mm × 46 mm, 5 µm), through the aid of a column-switching valve technique, on-throughs the elution mode using the second mobile phase containing a methanol and phosphate buffer (0.05 M, pH 5) in a ratio of 70:30 (v/v). Levofloxacin signals were detected using a fluorescence detector operated at excitation/emission wavelengths of 295/500 nm. The proposed Aut-SPE-BA-HPLC-FL methodology showed linearity over a levofloxacin concentration range of 10–10,000 ng/mL (r2 = 0.9992), with good recoveries ranging from 87.12 to 97.55%. Because of the validation qualities in terms of linearity, recovery, precision, accuracy, selectivity and robustness, the Aut-SPE-BA-HPLC-FL method has been used in some clinical trials for therapeutic drug monitoring and the pharmacokinetic study of levofloxacin in human serum.

Synergetic Effect of Dual Functional Monomers in Molecularly Imprinted Polymer Preparation for Selective Solid Phase Extraction of Ciprofloxacin

BACKGROUND

Ciprofloxacin (CIP), an important broad-spectrum fluoroquinolone antibiotic, was often used as a template molecule for the preparation of imprinted materials. In this study, methacrylic acid and 2-vinylpyridine were employed for the first time as dual functional monomers for synthesizing ciprofloxacin imprinted polymers.

METHODS

The chemical and physicochemical properties of synthesized polymers were characterized using Fourier transform-infrared spectroscopy, thermogravimetric analysis-differential scanning calorimetry, scanning electron microscopy, and nitrogen adsorption-desorption isotherm. The adsorption properties of ciprofloxacin onto synthesized polymers were determined by batch experiments. The extraction performances were studied using the solid phase extraction and HPLC-UV method.

RESULTS

The molecularly imprinted polymer synthesized with dual functional monomers showed a higher adsorption capacity and selectivity toward the template molecule. The adsorbed amounts of ciprofloxacin onto the imprinted and non-imprinted polymer were 2.40 and 1.45 mg g-1, respectively. Furthermore, the imprinted polymers were employed as a selective adsorbent for the solid phase extraction of ciprofloxacin in aqueous solutions with the recovery of 105% and relative standard deviation of 7.9%. This work provides an alternative approach for designing a new adsorbent with high adsorption capacity and good extraction performance for highly polar template molecules.

Determination of levofloxacin by HPLC with fluorescence detection in human breast milk

Aim: A new HPLC method with fluorescence detection has been developed and validated for the determination of levofloxacin, one of the fluoroquinolone class antibiotics, in breast milk. Materials & methods: Chromatographic separation was carried out on a reversed phase C18 column with acetonitrile and 10 mM o-phosphoric acid (25:75, v/v) mobile phase composition. Moxifloxacin was used as internal standard and the peaks were detected by fluorescence detection. Results & conclusion: Calibration graph was found linearly within the range of 2.5-500 ng/ml. Limit of detection and limit of quantification were found to be 0.63 and 2.11 ng/ml, respectively. Mean absolute recovery was 96.18%. The developed method has been successfully applied to the determination of levofloxacin in human breast milk taken from two healthy volunteers.

Facile Synthesis of Ag/AgVO3/N-rGO Hybrid Nanocomposites for Electrochemical Detection of Levofloxacin for Complex Biological Samples Using Screen-Printed Carbon Paste Electrodes

Silver vanadate nanorods (β-AgVO₃) with silver nanoparticles (Ag-NPs) decorated on the surface of the rods were synthesized by using simple hydrothermal technique and later anchored onto nitrogen-doped reduced graphene oxide (N-rGO) to make a novel nanocomposite. Experimental analyses were carried out to identify the electronic configuration by X-ray diffraction analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy analysis, which revealed monoclinic patterns of the C12/m1 space group with Wulff construction forming beta silver vanadate (β-AgVO₃) crystals with optical density and phase transformations. Ag nucleation showed consistent results with metallic formation and electronic changes occurring in [AgO₅] and [AgO₃] clusters. Transmission electron microscopy and field-emission scanning electron microscopy with elemental mapping and EDX analysis of the morphology reveals the nanorod structure for β-AgVO₃ with AgNPs on the surface and sheets for N-rGO. Additionally, a novel electrochemical sensor is constructed by using Ag/AgVO₃/N-rGO on screen-printed carbon paste electrodes for the detection of antiviral drug levofloxacin (LEV) which is used as a primary antibiotic in controlling COVID-19. Using differential pulse voltammetry, LEV is determined with a low detection limit of 0.00792 nm for a linear range of 0.09-671 μM with an ultrahigh sensitivity of 152.19 μA μM^-1 cm^-2. Furthermore, modified electrode performance is tested by real-time monitoring using biological and river samples.

Direct infusion nano-electrospray ionization mass spectrometry for therapeutic drug monitoring of ciprofloxacin and its metabolites in human saliva

A rapid and sensitive method based on direct infusion-nano-electrospray ionization mass spectrometry (DI-nESI-MS) has been developed for the detection and quantification of ciprofloxacin and its metabolites in human saliva. Saliva samples were collected after the oral administration of 500 mg ciprofloxacin tablets. Internal standard (IS), tamoxifen, was added to the collected samples, and then diluted with the ionization solvent, centrifuged and filtered. An aliquot of 4 μL of the filtrate was loaded into a nanospray (NS) capillary. The NS capillary was then fitted into an off-line ion source and the instrument was operated to acquire a two-minute run by applying a voltage of 1000 V (positive-ion detection mode). Quantification of ciprofloxacin relied on the ratio of its peak intensity to the IS peak intensity. The DI-nESI-MS method was validated and provided satisfactory precision with relative standard deviation ranging from 0.39 to 7.48 % and accuracy with relative error ranging from -2.12 to 9.72 %. The calibration curve showed good linearity (r²) > 0.999 over the concentration range of 10-4000 ng/mL. These results verify the effectiveness of the DI-nESI-MS method for monitoring of ciprofloxacin and its metabolites in human saliva samples.

QbD based Eudragit coated Meclizine HCl immediate and extended release multiparticulates: formulation, characterization and pharmacokinetic evaluation using HPLC-Fluorescence detection method

This study is based on the QbD development of extended-release (ER) extruded-spheronized pellets of Meclizine HCl and its comparative pharmacokinetic evaluation with immediate-release (IR) pellets. HPLC-fluorescence method was developed and validated for plasma drug analysis. IR drug cores were prepared from lactose, MCC, and PVP using water as granulating fluid. Three-level, three-factor CCRD was applied for modeling and optimization to study the influence of Eudragit (RL100-RS100), TEC, and talc on drug release and sphericity of coated pellets. HPLC-fluorescence method was sensitive with LLOQ 1 ng/ml and linearity between 10 and 200 ng/ml with R² > 0.999. Pharmacokinetic parameters were obtained by non-compartmental analysis and results were statistically compared using logarithmically transformed data, where p > 0.05 was considered as non-significant with a 90% CI limit of 0.8-1.25. The AUC_0-t and AUC_0-∞ of ER pellets were not significantly different with geometric mean ratio 1.0096 and 1.0093, respectively. The C_max of IR pellets (98.051 ng/ml) was higher than the ER pellets (84.052 ng/ml) and the T_max of ER pellets (5.116 h) was higher than the IR pellets (3.029 h). No significant food effect was observed on key pharmacokinetic parameters of ER pellets. Eudragit RL100 (6%) coated Meclizine HCl pellets have a potential therapeutic effect for an extended time period.

A new HPLC-DAD method for contemporary quantification of 10 antibiotics for therapeutic drug monitoring of critically ill pediatric patients

The common practice of therapeutic drug monitoring (TDM) involves the quantification of drug plasma concentrations at a specific time in a dosing window. Although TDM for antibiotics is not considered mandatory, it may represent a valid tool for clinicians in order to limit antibiotic resistance and avoid therapeutic failures. The aim of our study was to develop and validate a high-performance liquid chromatography-diode array detection method for simultaneous quantification of 10 antibiotics in plasma. This method has a fast analytical procedure that uses the same chromatographic conditions to quantify ceftazidime, ceftriaxone, meropenem, ertapenem, ciprofloxacin, tigecycline, ampicillin, levofloxacin and piperacillin, plus the β-lactamase inhibitor tazobactam. Method validation was ensured by testing selectivity, accuracy, precision, limits of detection and quantification, recovery and stability. The calibration ranges, established accordingly to the expected plasma concentration in patients, showed a coefficient of determination >0.996 for all compounds. Within- and between-days precisions reported a coefficient of variation >15%. Similarly, the accuracy evaluation reported a relative standard deviation of <10% for each antibiotic. The recovery ranged between 97 and 103% for all compounds. This method could represent a useful tool for TDM of antibiotics.

Determination of levofloxacin, ciprofloxacin, moxifloxacin and gemifloxacin in urine and plasma by HPLC-FLD-DAD using pentafluorophenyl core-shell column: Application to drug monitoring

Concentrations of fluoroquinolones, which are used in the treatment of many bacterial infections, should be monitored in biological fluids as they exhibit concentration-dependent bactericidal activity. In this study, a liquid chromatography method for the determination of levofloxacin, ciprofloxacin, moxifloxacin and gemifloxacin in human urine and plasma was developed for the first time. The efficiency of five different columns for the separation of these fluoroquinolones was compared. Experimental parameters that affect the separation, such as percentage of organic solvent, pH, temperature, gradient shape and detector wavelength, were optimized by a step-by-step approach. Using a pentafluorophenyl core-shell column (100 × 4.6 mm, 2.7 μm), the separation of four analytes was accomplished in <7.5 min. The developed method was validated for the determination of analytes in both urine and plasma with respect to sensitivity, specificity, linearity (r ≥ 0.9989), recovery (79.46-102.69%), accuracy, precision and stability (85.79-111.07%). The intra- and inter-day accuracies were within 89.55-111.94% with relative standard deviations of 0.35-8.05%. The feasibility of method was demonstrated by analyzing urine and plasma samples of patients orally receiving levofloxacin, ciprofloxacin or moxifloxacin. The developed method is suitable for therapeutic drug monitoring of these fluoroquinolones and can be applied to pharmacokinetic and toxicological studies.

Quinolone Complexes with Lanthanide Ions: An Insight into their Analytical Applications and Biological Activity

Quinolones comprise a series of synthetic bactericidal agents with a broad spectrum of activity and good bioavailability. An important feature of these molecules is their capacity to bind metal ions in complexes with relevant biological and analytical applications. Interestingly, lanthanide ions possess extremely attractive properties that result from the behavior of the internal 4f electrons, behavior which is not lost upon ionization, nor after coordination. Subsequently, a more detailed discussion about metal complexes of quinolones with lanthanide ions in terms of chemical and biological properties is made. These complexes present a series of characteristics, such as narrow and highly structured emission bands; large gaps between absorption and emission wavelengths (Stokes shifts); and long excited-state lifetimes, which render them suitable for highly sensitive and selective analytical methods of quantitation. Moreover, quinolones have been widely prescribed in both human and animal treatments, which has led to an increase in their impact on the environment, and therefore to a growing interest in the development of new methods for their quantitative determination. Therefore, analytical applications for the quantitative determination of quinolones, lanthanide and miscellaneous ions and nucleic acids, along with other applications, are reviewed here.

Absorption and Intestinal Metabolic Profile of Oleocanthal in Rats

Oleocanthal (OLC), a phenolic compound of extra virgin olive oil (EVOO), has emerged as a potential therapeutic agent against a variety of diseases due to its anti-inflammatory activity. The aim of the present study is to explore its in vivo intestinal absorption and metabolism. An in situ perfusion technique in rats was used, involving simultaneous sampling from the luminal perfusate and mesenteric blood. Samples were analysed by UHPLC-MS-MS for the presence of oleocanthal (OLC) and its metabolites. OLC was mostly metabolized by phase I metabolism, undergoing hydration, hydrogenation and hydroxylation. Phase II reactions (glucuronidation of hydrogenated OLC and hydrated metabolites) were observed in plasma samples. OLC was poorly absorbed in the intestine, as indicated by the low effective permeability coefficient (2.23 ± 3.16 × 10-5 cm/s) and apparent permeability coefficient (4.12 ± 2.33 × 10-6 cm/s) obtained relative to the values of the highly permeable reference compound levofloxacin (LEV). The extent of OLC absorption reflected by the area under the mesenteric blood-time curve normalized by the inlet concentration (AUC) was also lower than that of LEV (0.25 ± 0.04 vs. 0.64 ± 0.03, respectively). These results, together with the observed intestinal metabolism, suggest that OLC has a moderate-to-low oral absorption; but higher levels of OLC are expected to reach human plasma vs. rat plasma.

Separation and determination of ciprofloxacin in seawater, human blood plasma and tablet samples using molecularly imprinted polymer pipette-tip solid phase extraction and its optimization by response surface methodology

By synthesizing a molecular imprinted polymer as an efficient adsorbent, ciprofloxacin was micro-extracted from seawater, human blood plasma and tablet samples by pipette-tip micro solid phase extraction and determined spectrophotometrically. Response surface methodology was applied with central composite design to build a model based on factors affecting on microextraction of ciprofloxacin; including volume of eluent solvent, number of extraction cycles, number of elution cycles, and pH of sample. Other factors that affect extraction efficiency, such as type of eluent solvent, volume of sample, type, and amount of salt were optimized with one-variable-at-a-time method. Under optimum extraction condition, pH of sample solution was 7.0, volume of eluent solvent (methanol) was 200 µL, volume of sample solution was 10 mL, and the number of extraction and elution cycles was five and seven, respectively, amount of Na₂ SO₄ (as salt) and MIP (as sorbent) were optimized at 150 and 2 mg, respectively. The linear range of the suggested method under optimum extraction factors was 5-150 µg/L with a limit of detection of 1.50 µg/L for the analyte. Reproducibility of the method (as relative standard deviation) was better than 7%.

Comparison of high-performance liquid chromatography and ultraviolet-visible spectrophotometry to determine the best method to assess Levofloxacin released from mesoporous silica microspheres/nano-hydroxyapatite composite scaffolds

An assessment of Levofloxacin by high-performance liquid chromatography (HPLC) or ultraviolet-visible spectrophotometry (UV-Vis) and its pharmacokinetics in serum or plasma was made in a previous study by the present authors. Levofloxacin-loaded mesoporous silica microspheres/nano-hydroxyapatite (n-HA) composite scaffolds comprise a novel synthetic composite scaffold that may be utilized as a drug-delivery system for clinical usage. However, few studies have been published concerning a comparison of HPLC with UV-Vis, which is the preferred method for determination of Levofloxacin. In the present study, an HPLC method was first established, and subsequently a comparison of HPLC with the UV-Vis method was performed. The standard curve was established, and recovery rate from simulated body fluid was calculated. The linear concentration range for Levofloxacin was 0.05–300 µg/ml. The regression equation for HPLC was y=0.033x+0.010, with R²=0.9991, whereas that for UV-Vis was y=0.065x+0.017, with R²=0.9999. The recovery rates of low, medium and high (5, 25 and 50 µg/ml) concentrations of Levofloxacin determined by HPLC were 96.37±0.50, 110.96±0.23 and 104.79±0.06%, respectively, whereas those for low, medium and high concentrations according to UV-Vis were 96.00±2.00, 99.50±0.00 and 98.67±0.06%, respectively. Taken together, these findings demonstrated that it is not accurate to measure the concentration of drugs loaded on the biodegradable composite composites by UV-Vis. HPLC is the preferred method to evaluate sustained release characteristics of Levofloxacin released from mesoporous silica microspheres/n-HA composite scaffolds. The present study also provides guidance on which methods should be selected for investigating the sustained release properties of drugs in tissue engineering. The accurate determination of drug concentration in the drug delivery system provides guidance for the treatment of infectious diseases.

Establishment of a drug-induced rhabdomyolysis mouse model by co-administration of ciprofloxacin and atorvastatin

Rhabdomyolysis is one of the serious side effects of ciprofloxacin (CPFX), a widely used antibacterial drug; and occasionally, acute kidney injury (AKI) occurs. Often, rhabdomyolysis has occurred in patients taking CPFX co-administered with statins. The purpose of this study is to establish a mouse model of drug-induced rhabdomyolysis by co-administration of CPFX and atorvastatin (ATV) and to clarify the mechanisms of its pathogenesis. C57BL/6J mice treated with L-buthionine-(S,R)-sulfoximine (BSO), a glutathione synthesis inhibitor, were orally administered with CPFX and ATV for 4 days. Plasma levels of creatinine phosphokinase (CPK) and aspartate aminotransferase (AST) were significantly increased in the CPFX and ATV-co-administered group. Histopathological examination of skeletal muscle observed degeneration in gastrocnemius muscle and an increased number of the satellite cells. Expressions of skeletal muscle-specific microRNA and mRNA in plasma and skeletal muscle, respectively, were significantly increased. The area under the curve (AUC) of plasma CPFX was significantly increased in the CPFX and ATV-co-administered group. Furthermore, cytoplasmic vacuolization and a positively myoglobin-stained region in kidney tissue and high content of myoglobin in urine were observed. These results indicated that AKI was induced by myoglobin that leaked from skeletal muscle. The established mouse model in the present study would be useful for predicting potential rhabdomyolysis risks in preclinical drug development.

Evaluation of physicochemical properties as supporting information on quality control of raw materials and veterinary pharmaceutical formulations

This study aimed to show that the physicochemical proprieties obtained by Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and scanning electronic microscopy (SEM) can be useful tools for evaluating the quality of active pharmaceutical ingredients (APIs) and pharmaceutical products. In addition, a simple, sensitive, and efficient method employing HPLC-DAD was developed for simultaneous determination of lidocaine (LID), ciprofloxacin (CFX) and enrofloxacin (EFX) in raw materials and in veterinary pharmaceutical formulations. Compounds were separated using a Gemini C₁₈ (250 mm × 4.6 mm, 5 µm) Phenomenex^® column, at a temperature of 25 °C, with a mobile phase containing 10 mM of phosphoric acid (pH 3.29): acetonitrile (85.7:14.3, v/v) and a flow rate of 1.5 mL/min. Physicochemical characterization by TG, FTIR, and SEM of raw materials of LID, CFX, and EFX provided information useful for the evaluation, differentiation, and qualification of raw materials. Finally, the HPLC method was proved to be useful for evaluation of raw material and finished products, besides satisfying the need for an analytical method that allows simultaneous determination of EFX, CFX, and LID, which can also be extended to other matrices and applications.

•

FTIR, TGA, and SEM are useful tools for the evaluation of the quality of APIs.

•

A RP-HPLC method was developed and validated for the determination of LID, CFX, EFX.

•

The proposed RP-HPLC method showed precise and accurate results in quality control.

•

This method can be applied to the analysis of veterinary pharmaceutical products.

High-performance liquid chromatography with time-programmed fluorescence detection for the quantification of Levofloxacin in human plasma and cerebrospinal fluid in adults with tuberculous meningitis

An accurate and reliable high-performance liquid chromatography with time-programmed fluorescence detection was developed and validated to measure levofloxacin in human plasma and cerebrospinal fluid (CSF). After solid phase extraction process using Evolute^® ABN 96 fixed well plate; levofloxacin and internal standard-enoxacin were separated using a mobile phase consisting of phosphate buffer 10mM with 0.025% triethylamine pH 3.0 - acetonitrile (88:12, v/v) on a Purosphere RP-8e column (5μm, 125×4.0mm) at a flow rate of 1.2mL/min at 35°C. The excitation/emission wavelengths were set to 269/400nm and 294/500nm, for enoxacin and levofloxacin, respectively. The method was linear over the concentration range of 0.02 to 20.0μg/mL with a limit of detection of 0.01μg/mL. The relative standard deviation of intra-assay and inter-assay precision for levofloxacin at four quality controls concentrations (0.02, 0.06, 3.0 and 15.0μg/mL) were less than 7% and the accuracies ranged from 96.75% to 101.9% in plasma, and from 93.00% to 98.67% in CSF. The validated method was successfully applied to quantify levofloxacin in a considerable quantity of plasma (826) and CSF (477) samples collected from 232 tuberculous meningitis patients, and the preliminary intensive pharmacokinetics analysis from 14 tuberculous meningitis patients in Vietnam is described in this paper.

Analytical Methods for Determining Third and Fourth Generation Fluoroquinolones: A Review

ABSTRACT

Fluoroquinolones of the third and fourth generation posses wide bactericidal activity. Monitoring concentrations of antibacterial agents provides effective therapy and prevents the increase of bacterial resistance to antibiotics. The pharmacodynamic parameters that best describe fluoroquinalone activity are AUC/MIC and Cmax/MIC. Determining the level of this type of drug is essential to reach the effective concentration that inhibits the growth of bacteria. Determining the pharmaceutical formulation confirms the purity of a substance. Many methods have been developed to determine the level of these substances. They involve mainly the following analytical techniques: chromatography, capillary electrophoresis, and spectroscopy. The separation techniques were combined with different measuring devices, such as ultraviolet (UV), fluorescence detector (FLD), diode array detector (DAD), and mass spectrometry (MS). The analytical procedures require proper sample pre-conditioning such as protein precipitation, extraction techniques, filtration, or dilution. This paper reviews the reported analytical methods for the determining representatives of the third and fourth generation of fluoroquinolones. Attention was paid to pre-conditioning of the samples and the applied mobile phase. This report might be helpful in the selection of the proper procedure in determining the abovementioned drugs in different matrices.

GRAPHICAL ABSTRACT

A simple and sensitive high-performance liquid chromatography method for determination of ciprofloxacin in bioavailability studies of conventional and gastroretentive prolonged-release formulations

Background:

A very simple, sensitive, and accurate high-performance liquid chromatography (HPLC) method with ultraviolet detector was developed and applied to determine ciprofloxacin in human plasma following administration of a gastroretentive formulation developed in our laboratory.

Materials and Methods:

HPLC analysis was performed on a C₁₈ μ-Bondapack column (250 mm × 3.9 mm) using acetonitrile: potassium dihydrogen phosphate solution 0.1 M (20:80, v/v, pH 3) at a flow rate of 1.5 ml/min and eluate was monitored at 276 nm. After addition of phenacetin as internal standard, plasma samples were treated with 0.1 M phosphate buffer (pH: 7) and followed by extraction with dichloromethane. The method was validated for linearity, precision, accuracy, limit of quantitation (LOQ), robustness, stability, and applied in bioavailability studies of our developed gastroretentive formulation in healthy volunteers.

Results:

The calibration curves were linear over the concentration range 0.025–4 μg/ml with the detection limit of 15 ng/ml. Accuracy % were within 93–115 and the coefficient of variance % ranged from 0.20 to 12.8. The very low LOQ (25 ng/ml) allowed avoiding fluorometric detection which is more expensive and is not available in all laboratories. Ciprofloxacin was stable in samples with no evidence of degradation during 3 freeze-thaw cycles and 3 months storage at –70°C.

Conclusion:

This validated HPLC method was successfully used for the determination of ciprofloxacin in human plasma following oral administration of controlled release formulation, conventional immediate-release tablets and when administered concomitantly with divalent and trivalent cations such as aluminum-, magnesium-, or calcium-containing products under which the bioavailability of ciprofloxacin is significantly reduced.

Colorimetric recognition of pazufloxacin mesilate based on the aggregation of gold nanoparticles

A novel colorimetric nanomaterial-assisted optical sensor for pazufloxacin mesilate was proposed for the first time. Pazufloxacin mesilate could induce the aggregation of glucose-reduced gold nanoparticles (AuNPs) through hydrogen-bonding interaction and electrostatic attraction, leading to the changes in color and absorption spectra of AuNPs. The effect of different factors such as pH, the amount of AuNPs, reaction time and reaction temperature was inspected. Under the optimum condition, UV-vis spectra showed that the absorption ratio (A670/A532) was linear with the concentration of pazufloxacin mesilate in the range from 9×10(-8) mol L(-1) to 7×10(-7) mol L(-1) with a linear coefficient of 0.9951. This method can be applied to detecting pazufloxacin mesilate with an ultralow detection limit of 7.92×10(-9) mol L(-1) without any complicated instruments. Through inspecting other analytes and ions, the anti-interference performance of AuNP detection system for pazufloxacin mesilate was excellent. For its high efficiency, rapid response rate as well as wide linear range, it had been successfully used to the analysis of pazufloxacin mesilate in human urine quantificationally.

Ion-pair chromatography for simultaneous analysis of ethionamide and pyrazinamide from their porous microparticles

Ethionamide (ETA) and pyrazinamide (PZA) are considered the drugs of choice for the treatment of multidrug-resistant tuberculosis. Current methods available in the literature for simultaneous determination of ETA and PZA have low sensitivity or involve column modifications with lipophilic cations. The aim of this study was to develop a simple and validated reversed-phase ion-pair HPLC method for simultaneous determination of ETA and PZA for the characterization of polymeric-based porous inhalable microparticles in in vitro and spiked human serum samples. Chromatographic separation was achieved on a Phenomenex C18 column (250 mm × 4.6 mm) using a Shimadzu LC 10 series HPLC. The mobile phase consisted of A: 0.01% trifluoroacetic acid in distilled water and B: ACN/MeOH at 1:1 v/v. Gradient elution was run at a flow rate of 1.5 mL/min and a fixed UV wavelength of 280 nm. The validation characteristics included accuracy, precision, linearity, analytical range, and specificity. Calibration curves at seven levels for ETA and PZA were linear in the analytical range of 0.1-3.0 μg/mL with correlation coefficient of r (2) > 0.999. Accuracy for both ETA and PZA ranged from 94 to 106% at all quality control (QC) standards. The method was precise with relative standard deviation less than 2% at all QC levels. Limits of quantitation for ETA and PZA were 50 and 70 ng/mL, respectively. There was no interference from either the polymeric matrix ions or the biological matrix in the analysis of ETA and PZA.

Simultaneous determination of the combined drugs of ceftriaxone sodium, metronidazole, and levofloxacin in human urine by high-performance liquid chromatography

AIM

To develop a new high-performance liquid chromatography (HPLC) method for simultaneous determination of the combined drugs (ceftriaxone sodium, metronidazole, and levofloxacin) in human urine.

METHODS

Ceftriaxone sodium, metronidazole, and levofloxacin were separated on a Kromasil 100-5 C18 (250 mm × 4.6 mm, 5 μm, AKZO NOBEL, Bohus, Sweden) analytical column, using the mobile phase consisted of 1.5 mM KH(2) PO(4) (pH 4.5) with 0.0125% triethylamine-methnol (70:30, v/v). Ceftriaxone sodium, metronidazole, and levofloxacin were detected by a photodiode-array detector at 247, 320, 292 nm, respectively.

RESULTS

Under optimal conditions, the effective separation of ceftriaxone sodium, metronidazole, and levofloxacin was achieved. A good linearity with the correlation coefficients more than 0.999 was demonstrated. The detection limits of ceftriaxone sodium, metronidazole, and levofloxacin were 0.05, 0.01, and 0.25 μg/ml, respectively, and the average recoveries in human urine were in the range from 97.73 to 100.7% with the average relative standard deviation (RSD) in the range of 2.5% and 3.0%.

CONCLUSION

The proposed method was sensitive, accurate, and rapid. This work may provide a reference for clinical rational drug use and methodology for the pharmacokinetics study of the combined drugs.

Determination of ciprofloxacin in human plasma using high-performance liquid chromatography coupled with fluorescence detection: application to a population pharmacokinetics study in children with severe malnutrition

Clinical pharmacokinetic studies of ciprofloxacin require accurate and precise measurement of plasma drug concentrations. We describe a rapid, selective and sensitive HPLC method coupled with fluorescence detection for determination of ciprofloxacin in human plasma. Internal standard (IS; sarafloxacin) was added to plasma aliquots (200 μL) prior to protein precipitation with acetonitrile. Ciprofloxacin and IS were eluted on a Synergi Max-RP analytical column (150 mm×4.6 mm i.d., 5 μm particle size) maintained at 40°C. The mobile phase comprised a mixture of aqueous orthophosphoric acid (0.025 M)/methanol/acetonitrile (75/13/12%, v/v/v); the pH was adjusted to 3.0 with triethylamine. A fluorescence detector (excitation/emission wavelength of 278/450 nm) was used. Retention times for ciprofloxacin and IS were approximately 3.6 and 7.0 min, respectively. Calibration curves of ciprofloxacin were linear over the concentration range of 0.02-4 μg/mL, with correlation coefficients (r(2))≥0.998. Intra- and inter-assay relative standard deviations (SD) were <8.0% and accuracy values ranged from 93% to 105% for quality control samples (0.2, 1.8 and 3.6 μg/mL). The mean (SD) extraction recoveries for ciprofloxacin from spiked plasma at 0.08, 1.8 and 3.6 μg/mL were 72.8±12.5% (n=5), 83.5±5.2% and 77.7±2.0%, respectively (n=8 in both cases). The recovery for IS was 94.5±7.9% (n=15). The limits of detection and quantification were 10 ng/mL and 20 ng/mL, respectively. Ciprofloxacin was stable in plasma for at least one month when stored at -15°C to -25°C and -70°C to -90°C. This method was successfully applied to measure plasma ciprofloxacin concentrations in a population pharmacokinetics study of ciprofloxacin in malnourished children.