Pharmacokinetic of ceftazidime-avibactam in a critically ill patient under high-volume continuous venovenous haemodiafiltration: A first paediatric case report

Ceftazidime-avibactam is a novel cephalosporin/B-lactamase inhibitor developed in the context of increasing resistance. This case reports the pharmacokinetics of ceftazidime-avibactam in a critically ill child under continuous renal replacement (CRRT) therapy for fluid overload. The patient was a 6-month-old female with sepsis due to bloodstream infection to Stenotrophomonas maltophilia following stem cell transplantation for severe combined immunodeficiency. CRRT was started on Day 2. Concentrations have been monitored using liquid chromatography-tandem mass spectrometry. Treatment was given every 8 h with a 2 h infusion of 30-7,5 mg/kg and did not reach pharmacokinetic/pharmacodynamic targets. Total clearance was respectively 1.7 and 3.02 L/h, with CRRT clearance respectively 28.8%-60% for ceftazidime and 14%-33% for avibactam. Those clearances are higher than reported in adult literature leading to a risk of treatment failure and emerging resistance. This supports the benefit of monitoring antimicrobial therapy under CRRT and the necessity to assess higher dosing or continuous infusion of ceftazidime-avibactam.

Meropenem Population Pharmacokinetics and Dosing Regimen Optimization in Critically Ill Children Receiving Continuous Renal Replacement Therapy

BACKGROUND AND OBJECTIVE

We aimed to develop a meropenem population pharmacokinetic model in critically ill children receiving continuous renal replacement therapy and simulate dosing regimens to optimize patient exposure.

METHODS

Meropenem plasma concentration was quantified by high-performance liquid chromatography. Meropenem pharmacokinetics was investigated using a non-linear mixed-effect modeling approach. Monte Carlo simulations were performed to compute the optimal scheme of administration, according to the target of a 100% inter-dose interval time in which concentration is one to four times above the minimum inhibitory concentration (100% fT>1-4×MIC).

RESULTS

A total of 27 patients with a median age of 4 [interquartile range 0-11] years, a median body weight of 16 [range 7-35] kg receiving continuous renal replacement therapy were included. Concentration-time courses were best described by a one-compartment model with first-order elimination. Body weight (BW) produced significant effects on volume of distribution (V) and BW and continuous renal replacement therapy effluent flow rate (Q_eff) produced significant effects on clearance (CL): [Formula: see text] and [Formula: see text], where V_pop and CL_pop estimates were 32.5 L and 5.88 L/h, respectively, normalized to a 70-kg BW and median Q_eff at 1200 mL/h. Using this final model and Monte Carlo simulations, for patients with Q_eff over 1200 mL/h, meropenem continuous infusion was adequate in most cases to attain 100% fT>₁-_4xMIC. For bacterial infections with a low minimum inhibitory concentration (≤2 mg/L), meropenem intermitent administration was appropriate for patients weighing more than 20 kg with Q_eff <500 mL/h and for patients weighing more than 10 kg with Q_eff <100 mL/h.

CONCLUSIONS

Meropenem exposure in critically ill children receiving continuous renal replacement therapy needs dosing adjustments to the minimum inhibitory concentration that take into account body weight and the continuous renal replacement therapy effluent flow rate.

Therapeutic Drug Monitoring of Antibiotics in Critically Ill Children: An Observational Study in a Pediatric Intensive Care Unit

BACKGROUND

Septic critically ill children are at a high risk of inadequate antibiotic exposure, requiring them to undergo therapeutic drug monitoring (TDM). The aim of this study was to describe the use of TDM for antibiotics in critically ill children.

METHODS

The authors conducted a single-center observational study between June and December 2019, with all children treated with antibiotics in a pediatric intensive care unit located in a French university hospital. Standard clinical and laboratory data were recorded. Blood samples were collected for routine laboratory tests, and plasma antibiotic levels were assayed using validated analytical methods.

RESULTS

A total of 209 children received antibiotics. TDM was performed in 58 patients (27.8%) who had a greater mean organ dysfunction (according to the International Pediatric Sepsis Consensus Conference) (3 versus 1 in the non-TDM group; P < 0.05) and were treated with antibiotics for longer. A total of 208 samples were analyzed. The median [interquartile range] assay turnaround time was 3 (1-5) days, and 48 (46.2%) of the 104 initial antibiotic concentration values were below the pharmacokinetic/pharmacodynamic targets. A total of 34 (46%) of the 74 off-target TDM measurements available before the end of the antibiotic treatment prompted dose adjustment. This dose adjustment increased the proportion of on-target TDM measurements (70% versus 20% without adjustment). Subsequent measurements of the minimum inhibitory concentration showed that the use of the European Committee on Antimicrobial Susceptibility Testing's epidemiological cutoff values led to underestimation of pharmacokinetic/pharmacodynamic target attainment in 10 cases (20%).

CONCLUSIONS

TDM seems to be an effective means of optimizing antibiotic exposure in critically ill children. This requires timely plasma antibiotic assays and minimum inhibitory concentration measurements. It is important to define which patients should undergo TDM and how this monitoring should be managed.

Population pharmacokinetics of intravenous and oral ciprofloxacin in children to optimize dosing regimens

PURPOSE

This study aimed to characterize pharmacokinetics of intravenous and oral ciprofloxacin in children to optimize dosing scheme.

METHODS

Children treated with ciprofloxacin were included. Pharmacokinetics were described using non-linear mixed-effect modelling and validated with an external dataset. Monte Carlo simulations investigated dosing regimens to achieve a target AUC_0-24 h/MIC ratio ≥ 125.

RESULTS

A total of 189 children (492 concentrations) were included. A two-compartment model with first-order absorption and elimination best described the data. An allometric model was used to describe bodyweight (BW) influence, and effects of estimated glomerular filtration rate (eGFR) and age were significant on ciprofloxacin clearance.

CONCLUSION

The recommended IV dose of 10 mg/kg q8h, not exceeding 400 mg q8h, would achieve AUC_0-24 h to successfully treat bacteria with MICs ≤ 0.25 (e.g. Salmonella, Escherichia coli, Proteus, Haemophilus, Enterobacter, and Klebsiella). A dose increase to 600 mg q8h in children > 40 kg and to 15 mg/kg q8h (max 400 mg q8h, max 600 mg q8h if augmented renal clearance, i.e., eGFR > 200 mL/min/1.73 m²) in children < 40 kg would be needed for the strains with highest MIC (16% of Pseudomonas aeruginosa and 47% of Staphylococcus aureus). The oral recommended dose of 20 mg/kg q12h (not exceeding 750 mg) would cover bacteria with MICs ≤ 0.125 but may be insufficient for bacteria with higher MIC and a dose increase according bodyweight and eGFR would be needed. These doses should be prospectively confirmed, and a therapeutic drug monitoring could be used to refine them individually.

Estimation of piperacillin clearance with different glomerular filtration rate formulas in critically ill children

AIMS

Glomerular filtration rate (GFR) is difficult to assess in critically ill children using gold standard method and alternatives are needed. This study aimed to determine the most accurate GFR estimation formula for assessing piperacillin clearance in critically ill children, using a published piperacillin pharmacokinetics (PK) population model.

METHODS

All children hospitalized in the paediatric intensive care unit of a single institution who were receiving piperacillin were included. PK were described using the nonlinear mixed effect modelling software MONOLIX. In the initial PK model, GFR was estimated according to the Schwartz 1976 formula. We evaluated a set of 12 additional validated formulas, developed using plasma creatinine and/or cystatin C concentrations, in the building model to assess the lowest between-subject variability for piperacillin clearance.

RESULTS

We included 20 children with a median (range) postnatal age of 1.9 (0.1-19) years, body weight of 12.5 (3.5-69) kg. Estimated GFR according to the Schwartz 1976 formula was 160.5 (38-315) mL min^-1 1.73 m^-2 . Piperacillin clearance was best predicted by the Bouvet combined formula.

CONCLUSION

The combined Bouvet formula was the most accurate GFR estimation formula for assessing piperacillin clearance in critically ill children.

A meropenem pharmacokinetics model in patients with haematological malignancies

Background

Optimal dosing of antibiotics is critical in immunocompromised patients suspected to have an infection. Data on pharmacokinetics (PK) of meropenem in patients with haematological malignancies are scarce.

Objectives

To optimize dosing regimens, we aimed to develop a PK population model for meropenem in this population.

Methods

Patients aged ≥18 years, hospitalized in the haematology department of our 1500 bed university hospital for a malignant haematological disease and who had received at least one dose of meropenem were eligible. Meropenem was quantified by HPLC. PK were described using a non-linear mixed-effect model and external validation performed on a distinct database. Monte Carlo simulations estimated the PTA, depending on renal function, duration of infusion and MIC. Target for free trough concentration was set at &gt;4× MIC.

Results

Overall, 88 patients (181 samples) were included, 66 patients (75%) were in aplasia and median Modification of Diet in Renal Disease (MDRD) CLCR was 117 mL/min/1.73 m2 (range: 35–359). Initial meropenem dosing regimen ranged from 1 g q8h to 2 g q8h over 30 to 60 min. A one-compartment model with first-order elimination adequately described the data. Only MDRD CLCR was found to be significantly associated with CL. Only continuous infusion achieved a PTA of 100% whatever the MIC and MDRD CLCR. Short duration of infusion (&lt;60 min) failed to reach an acceptable PTA, except for bacteria with MIC &lt; 0.25 mg/L in patients with MDRD CLCR below 90 mL/min/1.73 m2.

Conclusions

In patients with malignant haematological diseases, meropenem should be administered at high dose (6 g/day) and on continuous infusion to reach acceptable trough concentrations.

Population pharmacokinetics of cefazolin in critically ill children infected with methicillin-sensitive Staphylococcus aureus

OBJECTIVES

Cefazolin is one of curative treatments for infections due to methicillin-sensitive Staphylococcus aureus (MSSA). Both growth and critical illness may impact the pharmacokinetic (PK) parameters. We aimed to build a population PK model for cefazolin in critically ill children in order to optimize individual dosing regimens.

METHODS

We included all children (age < 18 years, body weight (BW) > 2.5 kg) receiving cefazolin for MSSA infection. Cefazolin total plasma concentrations were quantified by high-performance liquid chromatography. A data modelling process was performed with the software MONOLIX. Monte Carlo simulations were used in order to attain the PK target of 100% fT _> 4 ×MIC.

RESULTS

Thirty-nine patients with a median (range) age of 7 (0.1-17) years and a BW of 21 (2.8-79) kg were included. The PK was ascribed to a one-compartment model, where typical clearance and volume of distribution estimations were 1.4 L/h and 3.3 L respectively. BW, according to the allometric rules, and estimated glomerular filtration rate (eGFR) on clearance were the two influential covariates. Continuous infusion with a dosing of 100 mg/kg/day to increase to 150 mg/kg/day for children with a BW < 10 kg or eGFR >200 mL/min/1.73m² were the best schemes to reach the PK target of 100% fT_> 4 ×MIC.

CONCLUSIONS

In critically ill children infected with MSSA, continuous infusion seems to be the most appropriate scheme to reach the PK target of 100 % fT _> 4 ×MIC in children with normal and augmented renal function.

HPLC-MS/MS method for the simultaneous quantification of dolutegravir, elvitegravir, rilpivirine, darunavir, ritonavir, raltegravir and raltegravir-β-d-glucuronide in human plasma

Therapeutic drug monitoring (TDM) is essential in the optimization of antiretroviral (ARV) treatments. In this work, we describe a new method for the simultaneous quantification of six molecules: the three novel ARV agents dolutegravir (DTG), elvitegravir (ELV) and rilpivirine (RPV), the first integrase inhibitor raltegravir (RAL) and its major metabolite the raltegravir-β-d-glucuronide (RAL-GLU), an protease inhibitor darunavir (DRV) and its booster ritonavir (RTV) in human plasma. The drugs were extracted from 100 μL of plasma by a simple method of protein precipitation using acetonitrile. The separation was carried out on a Kinetex phehyl-hexyl column using a phase mobile composed of 55 % of water (0.05 % formic acid,v/v) and 45 % of methanol (0.05 % formic acid,v/v). The flow rate was set at 0.5 mL/min. The calibration ranged from 60 to 15000 ng/mL for DRV, from 20 to 5000 ng/mL for DTG and ELV, from 10 to 2500 ng/mL for RAL, RAL-GLU, RTV and RPV. The proposed method was validated with a good precision (inter- and intra-day CV% inferior to 12.3 %) and a good accuracy (inter- and intra-day bias between -9.9 % and 10 %) for all the analytes. The proposed method is simple, reliable and suitable for therapeutic drug monitoring (TDM) and for pharmacokinetics studies.

Benzocaine polymorphism: pressure-temperature phase diagram involving forms II and III

Understanding the phase behavior of an active pharmaceutical ingredient in a drug formulation is required to avoid the occurrence of sudden phase changes resulting in decrease of bioavailability in a marketed product. Benzocaine is known to possess three crystalline polymorphs, but their stability hierarchy has so far not been determined. A topological method and direct calorimetric measurements under pressure have been used to construct the topological pressure-temperature diagram of the phase relationships between the solid phases II and III, the liquid, and the vapor phase. In the process, the transition temperature between solid phases III and II and its enthalpy change have been determined. Solid phase II, which has the highest melting point, is the more stable phase under ambient conditions in this phase diagram. Surprisingly, solid phase I has not been observed during the study, even though the scarce literature data on its thermal behavior appear to indicate that it might be the most stable one of the three solid phases.