Preparation of metallic pivot-based imprinted monolith for polar template

Adsorption and Recognition Property of Tyrosine Molecularly Imprinted Polymer Prepared via Electron Beam Irradiation

To realize the selective separation of L-tyrosine (L-Tyr) and avoid the drawbacks of traditional thermal polymerization, electron beam irradiation polymerization was developed for the fabrication of L-Tyr molecularly imprinted polymers (MIPs). Firstly, L-Tyr MIPs were prepared with methacrylic acid and ethylene glycol dimethacrylate and without an initiator. Then, the influence of absorbed dosage and temperature on the adsorption capacity of L-Tyr, as well as the thermodynamic behavior, were investigated. The maximum adsorption capacity of 10.96 mg/g for MIPs was obtained with an irradiation dosage of 340 kGy under 15 °C, and the ΔH0 and ΔS0 of the adsorption process are -99.79 kJ/mol and -0.31 kJ/mol·K, respectively. In addition, the effect of adsorption time on adsorption performance was evaluated under different initial concentrations, and the kinetic behavior was fitted with four different models. Finally, the recognition property of the obtained MIPs was investigated with L-Tyr and two analogues. The obtained MIPs have an imprinting factor of 5.1 and relatively high selective coefficients of 3.9 and 3.5 against L-tryptophan and L-phenylalanine, respectively. This work not only provided an L-Tyr MIP with high adsorption capacity and selectivity but also provided an effective and clean method for the synthesis of MIPs.

Preparation and Application Progress of Imprinted Polymers

Due to the specific recognition performance, imprinted polymers have been widely investigated and applied in the field of separation and detection. Based on the introduction of the imprinting principles, the classification of imprinted polymers (bulk imprinting, surface imprinting, and epitope imprinting) are summarized according to their structure first. Secondly, the preparation methods of imprinted polymers are summarized in detail, including traditional thermal polymerization, novel radiation polymerization, and green polymerization. Then, the practical applications of imprinted polymers for the selective recognition of different substrates, such as metal ions, organic molecules, and biological macromolecules, are systematically summarized. Finally, the existing problems in its preparation and application are summarized, and its prospects have been prospected.

Cobalt (II)-Mediated Molecularly Imprinted Polymer as a Monolithic Stationary Phase for Separation of Racemic Citronellal by Liquid Chromatography

A metal-mediated molecularly imprinted polymer (MMIP) monolithic column was prepared as the stationary phase for high-performance liquid chromatography (HPLC) and applied to the enantiomeric separation of rac-citronellal. MMIP column was prepared through in situ copolymerizations with the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate/[BMIM][BF₄] as the primary pore-forming agent and cobalt(II) acetate as the metal pivot. Interactions between polymer components in the synthesized monolith were assessed by FTIR to identify the functional groups. The monolith morphology was characterized with SEM, and the template removal was detected by UV Spectrophotometry at 253 nm. In this study, (R)-(+)-citronellal was used as a template, whereas 4-vinylpyridine (4-VP) was employed as the functional monomer with two monomer crosslinkers, trimethylolpropane trimethacrylate (TRIM), and ethylene glycol dimethacrylate (EDMA). The ternary mixture of porogenic solvent consisted of [BMIM][BF₄], dimethylformamide (DMF), and dimethyl sulfoxide (DMSO) with the applied ratio of 1 : 1:1 (v/v) and 10 : 1:5 (v/v) for the preparation of MMIP using TRIM and EDMA crosslinkers, respectively. Co(II) ion was added to the porogenic solvent before being mixed with the functional monomer and the crosslinker mixtures. Separating the rac-citronellal was achieved on the synthesized MMIP, showing better selectivity than the monolithic metal-mediated nonimprinted polymer (MNIP), nonimprinted polymer (NIP), and molecularly imprinted polymer (MIP).

Macroporous Polymer Monoliths in Thin Layer Format

Nowadays, macroporous polymer monoliths represent widely used stationary phases for a number of dynamic interphase mass exchange processes such as high-performance liquid chromatography, gas chromatography, electrochromatography, solid-phase extraction, and flow-through solid-state biocatalysis. This review represents the first summary in the field of current achievements on the preparation of macroporous polymer monolithic layers, as well as their application as solid phases for thin-layer chromatography and different kinds of microarray.

Improved Enantioselectivity for Atenolol Employing Pivot Based Molecular Imprinting

In the last few decades, molecular imprinting technology went through a spectacular evolution becoming a well-established tool for the synthesis of highly selective biomimetic molecular recognition platforms. Nevertheless, there is still room for advancement in the molecular imprinting of highly polar chiral compounds. The aim of the present work was to investigate the favorable kosmotropic effect of a ternary complex involving a polar chiral template (eutomer of atenolol) and a functional monomer, bridged by a central metal ion through well-defined, spatially directional coordinate bonds. The efficiency of the chiral molecular recognition was systematically assessed on polymers obtained both by non-covalent and metal-mediated molecular imprinting. The influence on the chromatographic retention and enantioselectivity of different experimental variables (functional monomers, cross-linkers, chaotropic agents, metal ions, porogenic systems, etc.) were studied on both slurry packed and monolithic HPLC columns. Deliberate changes in the imprinting and rebinding (chromatographic) processes, along with additional thermodynamic studies shed light on the particularities of the molecular recognition mechanism. The best performing polymer in terms of enantioselectivity (α = 1.60) was achieved using 4-vinyl pyridine as functional monomer and secondary ligand for the Co(II)-mediated imprinting of S-atenolol in the presence of EDMA as cross-linker in a porogenic mixture of [BMIM][BF₄]:DMF:DMSO = 10:1:5, v/v/v.

Green Strategies for Molecularly Imprinted Polymer Development

Molecular imprinting is a powerful technology to create artificial receptors within polymeric matrices. Although it was reported for the first time by Polyakov, eighty-four years ago, it remains, nowadays, a very challenging research area. Molecularly imprinted polymers (MIPs) have been successfully used in several applications where selective binding is a requirement, such as immunoassays, affinity separation, sensors, and catalysis. Conventional methods used on MIP production still use large amounts of organic solvents which, allied with stricter legislation on the use and release of chemicals to the environment and the presence of impurities on final materials, will boost, in our opinion, the use of new cleaner synthetic strategies, in particular, with the application of the principles of green chemistry and engineering. Supercritical carbon dioxide, microwave, ionic liquids, and ultrasound technology are some of the green strategies which have already been applied in MIP production. These strategies can improve MIP properties, such as controlled morphology, homogeneity of the binding sites, and the absence of organic solvents. This review intends to give examples reported in literature on green approaches to MIP development, from nano- to micron-scale applications.

Recent advances in green reagents for molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are tailor-made materials with special binding sites.

Green synthesis of monolithic column incorporated with graphene oxide using room temperature ionic liquid and eutectic solvents for capillary electrochromatography

In this work, a hybrid monolith incorporated with graphene oxide (GO) was prepared in the first time with binary green porogens of deep eutectic solvents (DESs) and room temperature ionic liquids (RTILs). GO was modified with 3-(trimethoxysilyl) propylmethacrylate (γ-MPS), and the resultant GO-MPS can be incorporated into poly (methacrylic acid-co-butylmethacrylate-co-ethylene glycol dimethacrylate) monoliths covalently. A hybrid monolithic column with high permeability and homogeneity can be achieved due to good dispersion of GO-MPS in the green solvents. The GO-MPS incorporated monolith was characterized by transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis and nitrogen adsorption tests. The separation of small organic molecules of alkylphenones and alkylbenzenes was used to evaluate the performance of GO-MPS grafted monolith. The GO-MPS grafted monolith displayed the maximum column efficiency of 147,000 plates/m, about twice higher than the GO-free monolith. In addition, all of the retention and selectivity of small molecules of alkylphenones and alkylbenzenes increased due to the addition of GO-MPS. The results demonstrated that the use of DESs and RTILs is a powerful approach for the preparation of GO incorporated polymer monoliths. The monolith was further applied to the separation of tryptic digests from bovine serum albumin, and the result indicated its potential in the analysis of some complex samples.

Preparation of ionic liquid-mediated imprinted monolith for selective capture and purification of corilagin

A method for solid-phase extraction (SPE) of corilagin from natural plant extracts based on molecularly imprinted polymers (MIPs) was developed. For the preparation of corilagin-MIP monoliths, 4-vinylpyridine was used as functional monomer, and ethylene glycol dimethacrylate was used as cross-linking monomer, using a mixture of 1-butyl-3-methylimidazoliumtetrafluoroborate (ionic liquid)-N,N-dimethylformamide-dimethyl sulfoxide as a porogen. A morphological characteristic of the corilagin imprinted monolith was further studied by scanning electron microscopy and nitrogen sorption method. The greatest imprinting factor of COR was up to 9. The MIPs were used as solid-phase extraction (SPE) sorbents for purification of COR and the mean recoveries of corilagin was 78.0% with COR purity of 98.0% from the crude extract of phyllanthus urinaria L. The resulting COR-imprinted polymer also displayed the good performance of fragment imprinting polymer for gallic acid with the mean recoveries of 94.0% and purity of 99.7%.

Preparation of metallic pivot-based imprinted monoliths with a hydrophilic macromonomer

The hydrophilic macromonomer oligo(ethyleneglycol) methyl ether methacrylate (OEG) was introduced into a metal ion-mediated MIP matrix to achieve good selectivity and less hydrophobic character.

Water-compatible molecularly imprinted polymers prepared using metal–organic gel as porogen

A novel water-compatible approach suitable for molecular imprinting was described by using metal–organic gel (MOG) as the porogenic solvent.

Synthesis of imprinted monolithic column with high content of monomers in ionic liquid

A MIP monolith with good permeability was successfully achieved using a strategy involving a high content of monomers in a [BMIM][BF₄]-based green solvent.