Enantioseparation of chiral pharmaceuticals in biomedical and environmental analyses by liquid chromatography: An overview

Chiral analysis and semi-preparative separation of metconazole stereoisomers by supercritical fluid chromatography and cytotoxicity assessment in vitro

Metconazole is one of the widely-used chiral triazole fungicides in controlling wheat leaf rust, powdery mildew, Fusarium head blight with high efficacy, and so forth. In the current work, the effects of chiral stationary phases, alcoholic modifiers, and column temperature on the chiral separation of metconazole were discussed in detail. Amylose tris(3,5-dimethylphenylcarbamate)-coated chiral stationary phase exhibited much stronger chiral recognition ability toward metconazole stereoisomers in the CO2 /ethanol mixture as compared to the others. Then, a two-step semi-preparative separation of metconazole was performed through supercritical fluid chromatography and high-performance liquid chromatography, and the enantiomeric excess values of four stereoisomers were achieved over 98%. Moreover, the enantioselective cytotoxicity of cis-metconazole against HepG2 cells has been investigated, and the order of the cell proliferation toxicity against HepG2 cells was (1R, 5S)-metconazole > (1S, 5R)-metconazole > the mixture. Briefly, this study would provide valuable information in the preparative separation of optically pure metconazole products through chromatographic techniques and their environmental risk assessment.

Carboxymethylated maltodextrin as a chiral selector for the separation of some basic drug enantiomers using capillary electrophoresis

In this work, carboxymethylated maltodextrin (Cm-MD) was successfully synthesized as an efficient anionic chiral selector and applied for the enantiomer separation of some basic drugs including tramadol, venlafaxine, verapamil, hydroxyzine, citalopram, fluoxetine, and amlodipine by capillary electrophoresis (CE). The synthesized chiral selector was characterized by the nuclear magnetic resonance and Fourier transform infrared spectrophotometry. Under the optimized Cm-MD modified CE conditions (background electrolyte: phosphate buffer (pH 5.0, 50 mM) containing 5% (w/v) Cm-MD; applied voltage: 20 kV; and capillary column temperature: 25 °C), successful enantiomer separation of all studied chiral drugs were observed. By comparison of Cm-MD and MD for enantiomer separation of the model drugs, it was revealed that Cm-MD exhibits a higher resolution in comparison to the MD modified CE. This enhanced resolution could be attributed to the electrostatic interactions between the cationic drugs and anionic Cm-MD and opposite direction mobility of the host-guest complex relative to the chiral analyte. The optimized Cm-MD modified CE method was successfully used for the assay of the enantiomers of citalopram and venlafaxine in commercial tablets. The proposed method showed the linear range of 5.0-150.0 mg/L and 10.0-150.0 mg/L for both enantiomers of citalopram and venlafaxine, respectively. The limits of quantification were 5.0 and 10.0 mg/L for the enantiomers of citalopram and venlafaxine, respectively. The limit of detection for all enantiomers was found to be < 3.0 mg/L. Intra- and inter-day RSDs (n = 4) were less than 9.7%. The relative errors were less than 9.4% for all enantiomers. The obtained results in this research show that Cm-MD as a new, efficient and inexpensive chiral selector can be used for enantiomer separation of basic drugs using the CE technique.

Recent advances in chiral liquid chromatography stationary phases for pharmaceutical analysis

Chirality is a common phenomenon in nature. Different enantiomers of chiral drug compounds have obvious differences in their effects on the human body. Therefore, the separation of chiral drugs plays an extremely important role in the safe utilization of drugs. High-performance liquid chromatography (HPLC) is an effective tool for the separation and analysis of compounds, in which the chromatographic packing plays a key role in the separation. Chiral pharmaceutical separation and analysis in HPLC rely on chiral stationary phases (CSPs). Thus, various CSPs are being developed to meet the needs of chiral drug separation and analysis. In this review, recent developments in CSPs, including saccharides (cyclodextrin, cellulose, amylose and chitosan), macrocycles (macrocyclic glycopeptides, pillar[n]arene and polyamide) and porous organic materials (metal-organic frameworks, covalent organic frameworks, and porous organic cages), for pharmaceutical analysis in HPLC were summarized, the advantages and disadvantages of various stationary phases were introduced, and their development prospects were discussed.

Progress of Pretreatment and Analytical Methods of Proton Pump Inhibitors: An Update since 2010

Proton pump inhibitors (PPIs) are the most commonly used medication for stomach secretion disorders. However, when it comes to safe, discreet pharmaceutical practice, widely recognized preparational and analytical method(s) for PPIs with sensitivity, selectivity, speed and high accuracy still remains underdeveloped. For this reason, this paper sets out to make a comprehensive review of the preparation and determination methods for PPIs based on multiple matrices since 2010. We have integrated newly-developed techniques (such as solid phase extraction, liquid phase micro-extraction, and solid phase micro-extraction) into conventional sample preparational methods. On the other hand, our analytical techniques include liquid chromatography, supercritical fluid chromatography, capillary electrophoresis, and employment of sensors. In addition, we have identified the pros and cons of each technique and have forecast their future developmental trends.

Nanomaterials-enriched sensors for detection of chiral pharmaceuticals

Advancements in nanoscience and nanotechnology have opened new pathways to fabricate novel nanostructures with interesting properties that would be used for different applications. In this respect, nanostructures comprising chirality are one of the most rapidly developing research fields encompassing chemistry, physics and biology. Chirality, also known as mirror asymmetry, describes the geometrical property of an object that is not superimposable on its mirror image. This characteristic plays a crucial role because these identical forms of chiral species in pharmaceuticals or food additives may exhibit different effects on living organisms. Therefore, chiral analysis is an important field of modern chemical analysis in health-related industries that are reliant on the production of enantiomeric compounds involving pharmaceuticals. This review covers the recent advances dealing with the synthesis, design and advantageous analytical performance of nanomaterials-enriched sensors used for chiral pharmaceuticals. We conclude this review with the challenges existing in this research field and our perspectives on some potential strategies with cutting-edge approaches for the rational design of sensors for chiral pharmaceuticals. We expect this comprehensive review will inspire future studies in nanomaterials-enriched chiral sensors.

Improvement of chemo- and stereoselectivity for phosphorothioate oligonucleotides in capillary electrophoresis by addition of cyclodextrins

Phosphorothioate (PS) modification is one of the most widely used oligonucleotide chemical alterations in the oligonucleotide backbone. It has proven to be crucial in the field of therapeutic oligonucleotides regarding the optimization of their physicochemical and biological properties. In this study, a capillary electrophoresis (CE) method with an acidic background electrolyte (BGE) containing a combination of β- and γ-cyclodextrins derivatives as chiral selectors is proposed for the diastereomeric separation of 5-mer oligonucleotides containing 0, 1, 2, or 3 phosphorothioate linkages (5´-TCGTG-3´). The effects of the BGE pH, organic modifier addition, and type of cyclodextrin (CD) on chemo- and stereoselectivity and resolution were studied. A mixture of 25 mM (2-hydroxy-3-N,N,N-trimethylamino)propyl-γ-CD and 10 mM carboxymethyl-β-cyclodextrin in a pH 3 buffer was found to be the most appropriate system for the qualitative evaluation of the short oligonucleotides investigated. These phosphorothioate oligonucleotides were separated with high efficiency in less than 11 min with no capillary treatment. The suggested approach can be the basis for purity testing of this new generation of therapeutics.

Ketamine and Norketamine: Enantioresolution and Enantioselective Aquatic Ecotoxicity Studies

Ketamine is a chiral drug used for various clinical purposes but often misused. It is metabolized to norketamine, an active chiral metabolite. Both substances have been detected in environmental matrices, but studies about their enantioselective toxic effects are scarce. In the present study, the enantiomers of ketamine and norketamine were separated by a semipreparative enantioselective liquid chromatography method, and their toxicity was investigated in different aquatic organisms. The enantioseparation was achieved using a homemade semipreparative chiral column. Optimized conditions allowed the recovery of compounds with enantiomeric purity higher than 99%, except for (R)-ketamine (97%). The absolute configuration of the enantiomers was achieved by experimental electronic circular dichroism (ECD). The ecotoxicity assays were performed with the microcrustacean Daphnia magna and the protozoan Tetrahymena thermophila using Toxkit MicroBioTests. Different concentrations were tested (0.1-10 000 µg/L) to include environmental levels (~0.5-~100 µg/L), for racemates (R,S) and the isolated enantiomers (R or S) of ketamine and norketamine. No toxicity was observed in either organism at environmental levels. However, at greater concentrations, (R,S)-ketamine presented higher mortality for D. magna compared with its metabolite (R,S)-norketamine (85 and 20%, respectively), and the (S)-ketamine enantiomer showed higher toxicity than the (R)-ketamine enantiomer. In addition, (S)-ketamine also presented higher growth inhibition than (R)-ketamine for T. thermophila at the highest concentrations (5000 and 10 000 µg/L). Contrary to D. magna, growth inhibition was observed for both enantiomers of norketamine and in the same magnitude order of the (S)-ketamine enantiomer. The results showed that the 2 organisms had different susceptibilities to norketamine and that the toxicity of ketamine at high concentrations is enantioselective for both organisms. Environ Toxicol Chem 2022;41:569-579. © 2020 SETAC.

Enantioresolution and Binding Affinity Studies on Human Serum Albumin: Recent Applications and Trends

The interaction between proteins and drugs or other bioactive compounds has been widely explored over the past years. Several methods for analysis of this phenomenon have been developed and improved. Nowadays, increasing attention is paid to innovative methods, such as high performance affinity liquid chromatography (HPALC) and affinity capillary electrophoresis (ACE), taking into account various advantages. Moreover, the development of separation methods for the analysis and resolution of chiral drugs has been an area of ongoing interest in analytical and medicinal chemistry research. In addition to bioaffinity binding studies, both HPALC and ACE al-low one to perform other type of analyses, namely, displacement studies and enantioseparation of racemic or enantiomeric mixtures. Actually, proteins used as chiral selectors in chromatographic and electrophoretic methods have unique enantioselective properties demonstrating suitability for the enantioseparation of a large variety of chiral drugs or other bioactive compounds. This review is mainly focused in chromatographic and electrophoretic methods using human serum albumin (HSA), the most abundant plasma protein, as chiral selector for binding affinity analysis and enantioresolution of drugs. For both analytical purposes, updated examples are presented to highlight recent applications and current trends.

Chiral Monolithic Silica-Based HPLC Columns for Enantiomeric Separation and Determination: Functionalization of Chiral Selector and Recognition of Selector-Selectand Interaction

This review draws attention to the use of chiral monolithic silica HPLC columns for the enantiomeric separation and determination of chiral compounds. Properties and advantages of monolithic silica HPLC columns are also highlighted in comparison to conventional particle-packed, fused-core, and sub-2-µm HPLC columns. Nano-LC capillary monolithic silica columns as well as polymeric-based and hybrid-based monolithic columns are also demonstrated to show good enantioresolution abilities. Methods for introducing the chiral selector into the monolithic silica column in the form of mobile phase additive, by encapsulation and surface coating, or by covalent functionalization are described. The application of molecular modeling methods to elucidate the selector–selectand interaction is discussed. An application for enantiomeric impurity determination is also considered.

Simultaneous separation of atenolol enantiomers and its acid/alkaline degradation impurities on mixed-mode chiral ligand exchange stationary phases

Simultaneous separation of the enantiomer and impurities is a huge challenge for the quality control of the chiral drug. In this work, mixed-mode chiral ligand exchange stationary phases (CSPs) modified by octyl and sulfhydryl ligands were prepared by vapor deposition and click chemistry methods. Qualitative and quantitative determination of the prepared CSPs were achieved by Fourier transform infrared spectroscopy, solid-state ¹³ C CP/MAS NMR, and elemental analysis. The chiral resolution of CSPs was investigated through a comprehensively chromatographic evaluation of various racemates. Besides, the thermodynamic experiment was carried out to elucidate the contribution of hydrophobic ligand to the improvement of chiral recognition and selectivity. Atenolol and its degradation products were analyzed on the synthesized CSPs and compared with the commercial chiral column. A good separation of atenolol enantiomers from its acid and alkaline degradation impurities was simultaneously achieved on the C₈ /L-Hypro CSP. This new CSP is expected to have more applications in the quality control of other chiral drugs.

Daptomycin: A Novel Macrocyclic Antibiotic as a Chiral Selector in an Organic Polymer Monolithic Capillary for the Enantioselective Analysis of a Set of Pharmaceuticals

Daptomycin, a macrocyclic antibiotic, is here used as a new chiral selector in preparation of chiral stationary phase (CSP) in a recently prepared polymer monolithic capillary. The latter is prepared using the copolymerization of the monomers glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA) in the presence of daptomycin in water. Under reversed phase conditions (RP), the prepared capillaries were tested for the enantioselective nanoliquid chromatographic separation of fifty of the racemic drugs of different pharmacological groups, such as adrenergic blockers, H1-blockers, NSAIDs, antifungal drugs, and others. Baseline separation was attained for many drugs under RP-HPLC. Daptomycin expands the horizon of chiral selectors in HPLC.

Enantioselectivity in Drug Pharmacokinetics and Toxicity: Pharmacological Relevance and Analytical Methods

Enzymes, receptors, and other binding molecules in biological processes can recognize enantiomers as different molecular entities, due to their different dissociation constants, leading to diverse responses in biological processes. Enantioselectivity can be observed in drugs pharmacodynamics and in pharmacokinetic (absorption, distribution, metabolism, and excretion), especially in metabolic profile and in toxicity mechanisms. The stereoisomers of a drug can undergo to different metabolic pathways due to different enzyme systems, resulting in different types and/or number of metabolites. The configuration of enantiomers can cause unexpected effects, related to changes as unidirectional or bidirectional inversion that can occur during pharmacokinetic processes. The choice of models for pharmacokinetic studies as well as the subsequent data interpretation must also be aware of genetic factors (such as polymorphic metabolic enzymes), sex, patient age, hepatic diseases, and drug interactions. Therefore, the pharmacokinetics and toxicity of a racemate or an enantiomerically pure drug are not equal and need to be studied. Enantioselective analytical methods are crucial to monitor pharmacokinetic events and for acquisition of accurate data to better understand the role of the stereochemistry in pharmacokinetics and toxicity. The complexity of merging the best enantioseparation conditions with the selected sample matrix and the intended goal of the analysis is a challenge task. The data gathered in this review intend to reinforce the importance of the enantioselectivity in pharmacokinetic processes and reunite innovative enantioselective analytical methods applied in pharmacokinetic studies. An assorted variety of methods are herein briefly discussed.

Recent advances in chiral analysis for biosamples in clinical research and forensic toxicology

This article covers current methods and applications in chiral analysis from 2010 to 2020 for biosamples in clinical research and forensic toxicology. Sample preparation for aqueous and solid biological samples prior to instrumental analysis were discussed in the article. GC, HPLC, capillary electrophoresis and sub/supercritical fluid chromatography provide the efficient tools for chiral drug analysis coupled to fluorescence, UV and MS detectors. The application of chiral analysis is discussed in the article, which involves differentiation between clinical use and drug abuse, pharmacokinetic studies, pharmacology/toxicology evaluations and chiral inversion. Typical chiral analytes, including amphetamines and their analogs, anesthetics, psychotropic drugs, β-blockers and some other chiral compounds, are also reviewed.

Enantiomeric Separation of Colchicine and Lacosamide by Nano-LC. Quantitative Analysis in Pharmaceutical Formulations

A chiral analytical methodology was developed by nano-liquid chromatography (nano-LC) enabling the enantiomeric separation of two chiral drugs, lacosamide (novel antiepileptic drug) and colchicine (antiuremic drug), commercialized as pure enantiomers. A capillary column lab-packed with an amylose tris(3,5-dimethylphenylcarbamate) chiral stationary phase was used in a lab-assembled nano-LC system. Lacosamide and colchicine enantiomers were separated in less than 8.0 and 9.0 min, respectively, with resolution values of 1.6 and 2.3, using 20 nL of sample and 1.8 µL of mobile phase per analysis. The analytical characteristics of the proposed methodology were evaluated according to the International Council for Harmonisation (ICH) guidelines, showing good analytical performance with good recoveries (97–98% and 100–103%) and precision values (relative standard deviation (RSD) <10.5 and <3.0%) for lacosamide and colchicine enantiomers, respectively. LODs were 1.7 and 2.0 µg/mL for (S)- and (R)-lacosamide, respectively, and 1.0 µg/mL for both colchicine enantiomers. Additionally, the developed methodology enabled to detect a 0.1% of the enantiomeric impurities, fulfilling the ICH regulation requirements. The method was applied to the determination of lacosamide and colchicine enantiomers in different pharmaceutical formulations to ensure their quality control. The content of the enantiomeric impurities was below a 0.1% and the amount of (R)-lacosamide and (S)-colchicine agreed with their labeled contents.

Capillary electrophoretic methods for quality control analyses of pharmaceuticals: A review

Capillary electrophoresis represents a promising technique in the field of pharmaceutical analysis. The presented review provides a summary of capillary electrophoretic methods suitable for routine quality control analyses of small molecule drugs published since 2015. In total, more than 80 discussed methods are sorted into three main sections according to the applied electroseparation modes (capillary zone electrophoresis, electrokinetic chromatography, and micellar, microemulsion, and liposome-electrokinetic chromatography) and further subsections according to the applied detection techniques (UV, capacitively coupled contactless conductivity detection, and mass spectrometry). Key parameters of the procedures are summarized in four concise tables. The presented applications cover analyses of active pharmaceutical ingredients and their related substances such as degradation products or enantiomeric impurities. The contribution of reported results to the current knowledge of separation science and general aspects of the practical applications of capillary electrophoretic methods are also discussed.

Speeding up Viedma Deracemization through Water-catalyzed and Reactant Self-catalyzed Racemization

Viedma deracemization is based on solution phase racemization, dissolution of racemic or scalemic conglomerates and crystal growth through autocatalytic cluster formation. With rate limiting racemization, its acceleration by appropriate catalysts may result in speeding up deracemization. A conglomerate-forming chiral compound may principally racemize directly, or via reverse of its formation reaction. For a hydrazine derivative, we investigated available racemization pathways in presence of pyrrolidine or thiourea amine as base catalysts: via Mannich or aza-Michael reaction steps and their reverse, or by enolization. Racemization by enolization was computationally found to dominate, both under water-free conditions and in presence of water, involving a multitude of different pathways. Faster racemization in presence of water resulted indeed in more rapid deracemization, when the base was pyrrolidine. Under water-free conditions, the role of water as enolization catalyst is assumed by chiral hydrazine itself - in autocatalytic racemization and in which both reactant and product are catalysts.

Chirality of β2-agonists. An overview of pharmacological activity, stereoselective analysis, and synthesis

β2-Agonists (β2-adrenergic agonists, bronchodilatants, and sympathomimetic drugs) are a group of drugs that are mainly used in asthma and obstructive pulmonary diseases. In practice, the substances used to contain one or more stereogenic centers in their structure and their enantiomers exhibit different pharmacological properties. In terms of bronchodilatory activity, (R)-enantiomers showed higher activity. The investigation of stereoselectivity in action and disposition of chiral drugs together with the preparation of pure enantiomer drugs calls for efficient stereoselective analytical methods. The overview focuses on the stereoselectivity in pharmacodynamics and pharmacokinetics of β2-agonists and summarizes the stereoselective analytical methods for the enantioseparation of racemic beta-agonists (HPLC, LC-MS, GC, TLC, CE). Some methods of the stereoselective synthesis for β2-agonists preparation are also presented.

The role of stereochemistry of antibiotic agents in the development of antibiotic resistance in the environment

Antibiotic resistance (ABR) is now recognised as a serious global health and economic threat that is most efficiently managed via a 'one health' approach incorporating environmental risk assessment. Although the environmental dimension of ABR has been largely overlooked, recent studies have underlined the importance of non-clinical settings in the emergence and spread of resistant strains. Despite this, several research gaps remain in regard to the development of a robust and fit-for-purpose environmental risk assessment for ABR drivers such as antibiotics (ABs). Here we explore the role the environment plays in the dissemination of ABR within the context of stereochemistry and its particular form, enantiomerism. Taking chloramphenicol as a proof of principle, we argue that stereoisomerism of ABs impacts on biological properties and the mechanisms of resistance and we discuss more broadly the importance of stereochemistry (enantiomerism in particular) with respect to antimicrobial potency and range of action.

On the applicability of functional-group symmetry-adapted perturbation theory and other partitioning models for chiral recognition - the case of popular drug molecules interacting with chiral phases

The applicability of symmetry-adapted perturbation theory (SAPT) and functional-group SAPT (F-SAPT) to study chiral recognition is investigated on an example of three popular chiral drug molecules: ibuprofen, norepinephrine, and baclofen, interacting with phenethylamine or proline - two molecules that are often used as chiral phases in chromatography. The comparison of the F-SAPT with the interacting quantum atoms (IQA) approach is also provided. Accurate estimation of energetic differences of the non-covalent intermolecular complexes composed of two chiral molecules is a necessary prerequisite for the possibility of a prediction of the chiral recognition. The SAPT method with interacting molecules described on the density functional theory level provides accurate total interaction energies, while the F-SAPT approach is the most useful in determining which functional groups are responsible for strengthening or weakening of the interaction between chiral molecules. The largest difference in the interaction energies has been calculated for the baclofen-phenethylamine and norepinephrine-phenethylamine pairs, while the smallest for the ibuprofen-proline and baclofen-proline ones. In most cases, the intermolecular interaction is found to be composed of a strong directional hydrogen bond, which was stabilized by two or more weaker non-covalent interactions between groups (in accordance with the phenomological three-point rule), but in several cases more subtle factors are responsible for larger stability of one diastereoisomer, like the stabilization of the conformation involving two noninteracting functional groups attached to a chiral atom through intramolecular attraction. Additionally, the simulated IR spectra were analyzed for all pairs of diastereoisomeric complexes and the red- and blue-shifts of characteristic bond vibrations were discussed in the context of inter-group interactions.

Enantiomeric Determination of Drugs in Pharmaceutical Formulations and Biological Samples by Electrokinetic Chromatography

Chirality is a relevant issue in the pharmaceutical field due to the different biological activity that enantiomers of a chiral drug can show. In fact, the desired biological or pharmaceutical activity might be present in only one of the enantiomers, while the other enantiomer(s) may have different biological activity, be inactive or even toxic. This has motivated in recent years the development of drugs marketed as pure enantiomers to avoid exposing the organism to the action of enantiomers that may not be active or even harmful to health. Thus, it is of high interest to develop enantioselective analytical methodologies to control the presence of enantiomeric impurities and to understand the enantioselective metabolism of chiral drugs. This review gives an overview about the analytical strategies developed by electrokinetic chromatography (EKC) from 2010 to June 2019 for the enantiomeric determination of drugs in both pharmaceutical formulations and biological samples. The types of chiral selectors used, the migration order of enantiomers, their resolution, the detection technique employed and the sensitivity achieved are revised and compared. Also, applications to assess the enantiomeric purity control of pharmaceutical formulations and to determine chiral drugs in biological samples to study their metabolism are included. Advantages and limitations of the chiral methods developed by EKC are also discussed.

Simultaneous Determination of Selegiline, Desmethylselegiline, R/S-methamphetamine, and R/S-amphetamine on Dried Urine Spots by LC/MS/MS: Application to a Pharmacokinetic Study in Urine

Objective: Chiral analysis is a crucial method to differentiate selegiline intake from drug abuse. A dried urine spot (DUS) analytical method based on spotting urine samples (10 μL) onto dried spot collection cards, and followed by air-drying and extraction, was developed and validated for the determination of selegiline, desmethylselegiline, R/S-methamphetamine, and R/S-amphetamine. Methods: Methanol (0.5 mL) was found to be the ideal extraction solvent for target extraction from DUSs under orbital-horizontal stirring on a lateral shaker at 1,450 rpm for 30 min. Determinations were performed by direct electrospray ionization tandem mass spectrometry (ESI-MS/MS) under positive electrospray ionization conditions using multiple reaction monitoring mode. The chromatographic system consisted of a ChirobioticTM V2 column (2.1 × 250 mm, 5 μm) and a mobile phase of methanol containing 0.1% (v/v) glacial acetic acid and 0.02% (v/v) ammonium hydroxide. Results and conclusions: The calibration curves were linear from 50 to 5,000 ng/mL, with r > 0.995 for all analytes, imprecisions ≤ 15% and accuracies between -11.4 and 11.7%. Extraction recoveries ranged from 48.6 to 105.4% with coefficients of variation (CV) ≤ 13.7%, and matrix effects ranged from 45.4 to 104.1% with CV ≤ 10.3%. The lower limit of quantification was 50 ng/mL for each analyte. The present method is simple, rapid (accomplished in 12 min), sensitive, and validated by a pharmacokinetic study in human urine collected after a single oral administration of SG.

Chiral Stationary Phases for Liquid Chromatography: Recent Developments

The planning and development of new chiral stationary phases (CSPs) for liquid chromatography (LC) are considered as continuous and evolutionary issues since the introduction of the first CSP in 1938. The main objectives of the development strategies were to attempt the improvement of the chromatographic enantioresolution performance of the CSPs as well as enlarge their versatility and range of applications. Additionally, the transition to ultra-high-performance LC were underscored. The most recent strategies have comprised the introduction of new chiral selectors, the use of new materials as chromatographic supports or the reduction of its particle size, and the application of different synthetic approaches for preparation of CSPs. This review gathered the most recent developments associated to the different types of CSPs providing an overview of the relevant advances that are arising on LC.

Synthesis of a Novel Chiral Stationary Phase by (R)-1,1′-Binaphthol and the Study on Mechanism of Chiral Recognition

(R)-6-Acrylic-BINOL CSP, a novel chiral stationary phase was prepared by (R)-Binaphthol (R-BINOL) by introducing the acrylic group into the 6-position of (R)-BINOL before bonding it to the surface of silica gel. The structure of the CSP was characterized by IR, SEM, and element analysis. This new material was tested for its potential as a CSP for HPLC under normal phase conditions, especially for conjugated compounds. Six solutes were chosen to evaluate the chiral separation ability of the novel CSP. The effects of the mobile phase and temperature on enantioseparation were studied, and the chiral recognition mechanism was also discussed. The results showed that the space adaptability and π-π stacking between the solutes and the CSP affected the retention and enantioseparation. The Van’t Hoff curve indicated that under the experimental conditions, the separation mechanism of six solutes did not change, which were all enthalpy driven.

Enantioselective degradation of ofloxacin and levofloxacin by the bacterial strains Labrys portucalensis F11 and Rhodococcus sp. FP1

Fluoroquinolones are a class of antibiotics widely prescribed in both human and veterinary medicine of high environmental concern and characterized as environmental micropollutants due to their ecotoxicity and persistence and antibacterial resistance potential. Ofloxacin and levofloxacin are chiral fluoroquinolones commercialized as racemate and in enantiomerically pure form, respectively. Since the pharmacological properties and toxicity of the enantiomers may be very different, understanding the stereochemistry of these compounds should be a priority in environmental monitoring. This work presents the biodegradation of racemic ofloxacin and its (S)-enantiomer levofloxacin by the bacterial strains Labrys portucalensis F11 and Rhodococcus sp. FP1 at a laboratory-scale microcosm following the removal and the behavior of the enantiomers. Strain F11 could degrade both antibiotics almost completely when acetate was supplied regularly to the cultures. Enrichment of the (R)-enantiomer was observed in FP1 and F11 cultures supplied with ofloxacin. Racemization was observed in the biodegradation of the pure (S)-ofloxacin (levofloxacin) by strain F11, which was confirmed by liquid chromatography - exact mass spectrometry. Biodegradation of ofloxacin at 450 µg L^-1 by both bacterial strains expressed good linear fits (R² > 0.98) according to the Rayleigh equation. The enantiomeric enrichment factors were comprised between - 22.5% to - 9.1%, and - 18.7% to - 9.0% in the biodegradation of ofloxacin by strains F11 and FP1, respectively, with no significant differences for the two bacteria under the same conditions. This is the first time that enantioselective biodegradation of ofloxacin and levofloxacin by single bacteria is reported.

Enantiomeric ratios: Why so many notations?

The correct quantification of enantiomers is pivotal in a variety of fields, such as pharmacokinetic studies, enantioselective syntheses, chemical characterization of natural products, authentication of fragrance and food, biodegradation behavior, accurate evaluation of environmental risk, and it can also provide information for sentencing guidance in forensic field. Enantioselective chromatography is the first choice to assess the composition of an enantiomeric mixture. Different notations have been used to express the measured enantiomeric ratios, which compromise the results and represent a challenge for data comparison. This manuscript critically discusses the currently used notations and exemplifies with applications in different fields indicating the advantages and disadvantages of one of the adopted systems. In order to simplify the notations, the use of enantiomeric ratio (e.r.%) as standardization for nonchiroptical methods is proposed.

Enantioselective analysis and degradation of isofenphos-methyl in vegetables by liquid chromatography-tandem mass spectrometry

The enantioselective degradation of isofenphos-methyl in cowpea, cucumber, and pepper under field conditions was investigated to elucidate the enantioselective environmental behaviors of this pesticide. The concentrations of the enantiomers were determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The degradation rates of isofenphos-methyl enantiomers were the fastest in cowpea, followed by cucumber and pepper, with half-lives ranging from 1.48 to 8.06 days. The enantioselective degradation of isofenphos-methyl was characterized by calculating and comparing the values of enantiomer fraction (EF) and enantiomeric selectivity (ES). The degradation rates and enantioselectivities of isofenphos-methyl were different for the three vegetables. (R)-(-)-isofenphos-methyl was degraded faster than (S)-(+)-isofenphos-methyl in cowpea and cucumber, whereas (S)-(+)-isofenphos-methyl underwent preferential degradation in pepper. These results could serve as a reference for the study of enantioselective behavior of isofenphos-methyl in plants and further food safety evaluation, where the enantiomeric differences should be considered in the risk assessment.

Enantiomer surface chemistry: conglomerate versus racemate formation on surfaces

Research on surface chirality is motivated by the need to develop functional chiral surfaces for enantiospecific applications. While molecular chirality in 3D has been the subject of study for almost two centuries, many aspects of 2D chiral surface chemistry have yet to be addressed. In 3D, racemic mixtures of chiral molecules tend to aggregate into racemate (molecularly heterochiral) crystals much more frequently than conglomerate (molecularly homochiral) crystals. Whether chiral adsorbates on surfaces preferentially aggregate into heterochiral rather than homochiral domains (2D crystals or clusters) is not known. In this review, we have made the first attempt to answer the following question based on available data: in 2D racemic mixtures adsorbed on surfaces, is there a clear preference for homochiral or heterochiral aggregation? The current hypothesis is that homochiral packing is preferred on surfaces; in contrast to 3D where heterochiral packing is more common. In this review, we present a simple hierarchical scheme to categorize the chirality of adsorbate-surface systems. We then review the body of work using scanning tunneling microscopy predominantly to study aggregation of racemic adsorbates. Our analysis of the existing literature suggests that there is no clear evidence of any preference for either homochiral or heterochiral aggregation at the molecular level by chiral and prochiral adsorbates on surfaces.

Enantiomeric Mixtures in Natural Product Chemistry: Separation and Absolute Configuration Assignment

Chiral natural product molecules are generally assumed to be biosynthesized in an enantiomerically pure or enriched fashion. Nevertheless, a significant amount of racemates or enantiomerically enriched mixtures has been reported from natural sources. This number is estimated to be even larger since the enantiomeric purity of secondary metabolites is rarely checked in the natural product isolation pipeline. This latter fact may have drastic effects on the evaluation of the biological activity of chiral natural products. A second bottleneck is the determination of their absolute configurations. Despite the widespread use of optical rotation and electronic circular dichroism, most of the stereochemical assignments are based on empirical correlations with similar compounds reported in the literature. As an alternative, the combination of vibrational circular dichroism and quantum chemical calculations has emerged as a powerful and reliable tool for both conformational and configurational analysis of natural products, even for those lacking UV-Vis chromophores. In this review, we aim to provide the reader with a critical overview of the occurrence of enantiomeric mixtures of secondary metabolites in nature as well the best practices for their detection, enantioselective separation using liquid chromatography, and determination of absolute configuration by means of vibrational circular dichroism and density functional theory calculations.

Chiral Drug Analysis in Forensic Chemistry: An Overview

Many substances of forensic interest are chiral and available either as racemates or pure enantiomers. Application of chiral analysis in biological samples can be useful for the determination of legal or illicit drugs consumption or interpretation of unexpected toxicological effects. Chiral substances can also be found in environmental samples and revealed to be useful for determination of community drug usage (sewage epidemiology), identification of illicit drug manufacturing locations, illegal discharge of sewage and in environmental risk assessment. Thus, the purpose of this paper is to provide an overview of the application of chiral analysis in biological and environmental samples and their relevance in the forensic field. Most frequently analytical methods used to quantify the enantiomers are liquid and gas chromatography using both indirect, with enantiomerically pure derivatizing reagents, and direct methods recurring to chiral stationary phases.