Micro-QuEChERS extraction coupled to GC–MS for a fast determination of Bisphenol A in human urine

Optimization of a modified Captiva EMR-lipid method based on micro-matrix solid-phase dispersion coupled with gas chromatography-mass spectrometry for the determination of nine bisphenols in mussel samples

This work describes a reliable, cheap, easy and fast method for analysis of nine bisphenols in mussel samples by gas chromatography-mass spectrometry after trimethylsilylation. The modified method consisted of miniaturized matrix solid phase dispersion (micro-MSPD) in a glass Pasteur pipette using Captiva EMR (enhanced matrix removal)-lipid as the sorbent. Good linearity was obtained in the work range (1-500 μg L-1) with a correlation coefficient (R2) ≥ 0.998. The method accuracy and precision were determined at two concentration levels. The results show recoveries ranging from 55 to 111%. The precision varied from 1.95 to 11.4% (RSD). The whole quantification limits were between 0.056 and 3.42 μg per kg dry weight. The analytical procedure was applied for the analyses of five mussel samples collected from Galician Rias. The major compound was BPA, and wild mussels from Rías de Ferrol, Vigo and A Coruña had the highest levels. The proposed method is suitable for the analysis of BPA and its analogues in mussel samples.

Optimization of micro-QuEChERS extraction coupled with gas chromatography-mass spectrometry for the fast determination of phthalic acid esters in mussel samples

In this study, a new miniaturized version of the analytical method based on the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) technique using Florisil in the cleanup step for extracting six phthalic acid esters (PAEs) in mussel samples was developed by using a design of experiments. For this purpose, 1.5 mL of ultrapure water and later, 1.5 mL of acetonitrile were added to 0.1 g of the lyophilized sample, followed by 0.3 g of a commercial extraction salt packet (magnesium sulfate, sodium chloride, sodium citrate dihydrate, and sodium hydrogencitrate sesquihydrate). The recovered extract was purified using 0.1 g of Florisil. The final extract was evaporated and reconstituted in 1 mL of hexane. The six phthalates were determined by a GC-MS (SIM) system. The whole method was validated at two concentration levels. Recoveries ranged from 79% to 108%. Reproducibility in terms of coefficients of variation was between 4.9% and 12.1%. The limits of quantification of the whole method were between 0.53 and 38.0 μg per kg dry weight. Five mussel samples coming from the Galician Rías were analysed using this method. Except for three of the five samples where DnOP (di-n-octyl phthalate) was below the limit of quantification, all PAEs were found in concentrations that ranged between 1.99 and 372.7 μg per kg dry weight.

Challenges in the Analytical Preparation of a Biological Matrix in Analyses of Endocrine-Disrupting Bisphenols

Endocrine-disrupting chemicals (EDCs) are xenobiotics presented in a variety of everyday products that may disrupt the normal activity of hormones. Exposure to bisphenol A as EDC at trace and ultra-trace levels is associated with adverse health effects, and children are recognized as the most vulnerable group to EDCs exposure. In this review, a summary is presented of up-to-date sample preparation methods and instrumental techniques applied for the detection and quantification of bisphenol A and its structural analogues in various biological matrices. Biological matrices such as blood, cell-free blood products, urine, saliva, breast milk, cordial blood, amniotic and semen fluids, as well as sweat and hair, are very complex; therefore, the detection and later quantification of bisphenols at low levels present a real analytical challenge. The most popular analytical approaches include gas and liquid chromatography coupled with mass spectrometry, and their enhanced reliability and sensitivity finally allow the separation and detection of bisphenols in biological samples, even as ultra-traces. Liquid/liquid extraction (LLE) and solid-phase extraction (SPE) are still the most common methods for their extraction from biological matrices. However, many modern and environmentally safe microextraction techniques are currently under development. The complexity of biological matrices and low concentrations of analytes are the main issues for the limited identification, as well as understanding the adverse health effects caused by chronical and ubiquitous exposure to bisphenols and its analogues.

A low-cost eco-friendly fast drug extraction (FaDEx) technique for environmental and bio-monitoring of psychoactive drug in urban water and sports-persons' urine samples

Nicotine is the most prominent psychoactive/addictive chemical substance consumed worldwide among young players in team sports. Moreover, urinary nicotine discharge and nicotine-based products disposal in environmental waters has been unavoidable in recent years. Therefore, sensitive monitoring of nicotine content in environmental waters and human urine samples is essential. In this study, we developed a miniaturized novel green, low-cost, sensitive, in-syringe-based semi-automated fast drug extraction (FaDEx) protocol coupled with gas chromatography-flame ionization detection (GC-FID) for the efficient environmental and bio-monitoring of nicotine in aqueous samples. The FaDEx method consists of two steps; firstly, the target analyte was extracted using dimethyl carbonate (a green solvent) and extraction salts. After that, the extraction solvent was passed automatically through the solid-phase extraction cartridge at a constant flow rate for the cleanup process to achieve the sensitive nicotine analysis by GC-FID. Under optimized experimental conditions, the developed method showed excellent linearity over the concentration ranges between 20-2000 ng mL^-1 with a correlation coefficient >0.99. The detection and quantification limits were 4 and 20 ng mL^-1, respectively. The presented method was applied to monitor and assess nicotine exposure in sports-persons' urine and environmental water samples. The method accuracy and precision in terms of relative recovery and relative standard deviation (for triplicate analysis) were 85.4-110.2% and ≤8%, respectively. Finally, the impact of our procedure on the environment from a green analytical chemistry view was assessed using a novel metric system called AGREE, and obtained the greenness score of 0.87, indicating its an efficient alternative green analytical protocol for routine environmental and bio-monitoring of nicotine in environmental and biological samples.

Application of High-Performance Liquid Chromatography Combined with Fluorescence Detector and Dispersive Liquid-Liquid Microextraction to Quantification of Selected Bisphenols in Human Amniotic Fluid Samples

Bisphenol A (BPA) is a widely produced chemical worldwide found in numerous everyday products. Its endocrine-disrupting properties and omnipresence have aroused concern and led to several restrictions on its use. These restrictions and growing public awareness about the toxicity of BPA have resulted in market products labeled "BPA-free", with BPAs often being replaced by other bisphenols. This is why constant biomonitoring of bisphenol levels in various body fluids and tissues is essential. In this study, we propose the use of simple, cost-effective high-performance liquid chromatography coupled with the fluorescence detector (HPLC-FLD) method for the determination of simultaneously selected bisphenols in amniotic fluid. For the sample preparation, a fast, simple, and "green" dispersive liquid-liquid microextraction (DLLME) method was used, achieving mean recovery values in the range of 80.9-115.9% with relative standard deviations below 12% for all analytes. Limits of quantification (LOQs) determined in the amniotic fluid matrix ranged from 6.17 to 22.72 ng/mL and were obtained from a calibration curve constructed using least-squares linear regression analysis for all cases. The presented sample preparation procedure can be easily adopted for LC-MS analysis.

Flexible Electrochemical Platform Coupled with In Situ Prepared Synthetic Receptors for Sensitive Detection of Bisphenol A

A flexible electrochemical sensor based on the carbon felt (CF) functionalized with Bisphenol A (BPA) synthetic receptors was developed. The artificial Bisphenol A receptors were grafted on the CF by a simple thermal polymerization molecular imprinting process. Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and electrochemical characterizations were used to analyze the receptors. Characterization results demonstrated that the Bisphenol A synthetic receptors successfully formed on the CFs surface. Because the synthetic receptor and the porous CFs were successfully combined, the sensor displayed a better current response once Bisphenol A was identified. The sensor's linear range was determined to be from 0.5 to 8.0 nM and 10.0 to 300.0 nM, with a detection limit of 0.36 nM. Even after being bent and stretched repeatedly, the electrode's performance was unaffected, demonstrating the robustness, adaptability and viability of installing the sensor on flat or curved surfaces for on-site detection. The designed electrochemical sensor has been used successfully to identify Bisphenol A in milk samples with satisfactory results. This work provided a promising platform for the design of implantable, portable and miniaturized sensors.

Urinary metabolites of diazinon and chlorpyrifos in sprayer operators and farm workers of a potato farm

In order to investigate the effect of diazinon and chlorpyrifos on agricultural workers exposed to pesticides, urinary metabolites 2-Isopropyl-6-methyl-4-pyrimidinol (IMPy) and 3,5,6-Trichloro-2-pyridinol (TPCy) in farm workers, sprayer operators, and non-exposed people as a control group were measured. The modified QuEChERS method was applied to extract samples and was measured using a gas chromatograph/nitrogen-phosphorus detector. The obtained results showed that the median concentrations of TCPy were 36.92-547.7 and 7.7-49.58 ng/mL for sprayer operators and farm workers, respectively. Moreover, the median concentrations of IMPy were 81.66-593.1 ng/mL for sprayer operators and 40.6-66.1 ng/mL for farm workers. The control group had no measurable metabolites. The IMPy level of 60% of sprayer operators was significantly higher (P ˂ 0.05) than the TCPy level. The analysis of variance highlighted the significant relationship (P ˂ 0.05) between the levels of each metabolite and the use of safety gloves, respiratory masks, safety goggles, working time per week, and type of insecticide exposure. Our findings revealed the need to measure the urinary metabolites of these insecticides in other exposed workers. Also, workers should be taught the impact of using personal protective equipment.

A paper-analytical device for detecting bisphenol-A in foods

Bisphenol A (BPA) is a plastic monomer that can leach into food and cause adverse health effects with long-term exposure. In this study, we developed simple paper-analytical devices (PADs) for detecting BPA in food. The PADs were designed with hydrophilic and hydrophobic areas via wax printing. The hydrophilic areas were designed as a detection zone and modified with carboxymethyl cellulose (CMC) for the immobilisation of BPA-bovine serum albumin (BSA). The monoclonal antibodies against BPA were generated and modified with quantum dots (QDs) to synthesise QD-antibody (QD-Ab) probes. Detection conditions of the assay were optimized, with results of 0.1 μg of BPA-BSA and 30-fold diluted QD-Ab probes. The detection limit was 0.098 μg L^-1 using ImageJ analysis. Samples of drinking water, green tea beverage and peanut cooking oil were selected to conduct the matrix effect study. The recovery rates of BPA in different samples ranged from 78.77% to 118.96%, proving that the PADs were a simple and sensitive detection method for easy, low-cost analysis of real food samples.

A QuEChERS-based UPLC-MS/MS method for rapid determination of organophosphate flame retardants and their metabolites in human urine

Organophosphate flame retardants (OPFRs) have been widely used in consumer products to prevent fire spread. However, once released into the atmospheric environment, they may accumulate in humans and undergo metabolic transformation and excretion by urine. In order to clarify the human exposure to OPFRs, a quick, easy, cheap, effective, rugged, and safe method for the simultaneous determination of urinary OPFRs and their metabolites by ultra-performance liquid chromatography-tandem triple quadrupole mass spectrometry was developed. After the optimization by a single-factor or orthogonal experiment, the satisfactory recovery (87.8-119%), matrix effect (-8.88-9.29%), method quantitation limit (3.66-159 ng/L), and inter-day repeatability (1.24 - 10.6%) of most analytes were achieved in artificial urine samples. Based on a monitoring test by the developed method, we propose that urinary bis(1-chloro-2-propyl) phosphate and di-p-cresyl phosphate could be used to trace human exposure to tris(1-chloro-2-propyl) phosphate and tricresyl phosphate, respectively. Most importantly, this is the first study to reveal that 4-hydroxyphenyl diphenyl phosphate (4-OH-TPHP) was dominantly presented in its conjugated form rather than its free form in urine (p = 0.037). Overall, the obtained results contribute a relatively rapid method to help conduct large-scale urine monitoring for revealing the human exposure and risk of OPFRs.

Direct and Sensitive Electrochemical Detection of Bisphenol A in Complex Environmental Samples Using a Simple and Convenient Nanochannel-Modified Electrode

Rapid, convenient, and sensitive detection of Bisphenol A (BPA) in complex environmental samples without the need for tedious pre-treatment is crucial for assessing potential health risks. Herein, we present an electrochemical sensing platform using a simple nanochannel-modified electrode, which enables the direct and sensitive detection of BPA in complex samples. A vertically ordered mesoporous silica-nanochannel film (VMSF) with high-density nanochannels is rapidly and stably grown on the surface of a electrochemically activated glassy carbon electrode (p-GCE) by using the electrochemically assisted self-assembly (EASA) method. The high antifouling capability of the VMSF/p-GCE sensor is proven by investigating the electrochemical behavior of BPA in the presence of model coexisting interfering molecules including amylum, protein, surfactant, and humic acid. The VMSF/p-GCE sensor can sensitively detect BPA ranged from 50 to 1.0 μM and 1.0–10.0 μM, with low detection limits (15 nM). Owing to the electrocatalytic performance and high potential resolution of p-GCE, the sensor exhibits high selectivity for BPA detection in the presence of common environmental pollutants, including bisphenol S (BPS), catechol (CC), hydroquinone (HQ), and 4-nitrophenol (4-NP). In combination with the good antifouling property of the VMSF, direct detection of BPA in environmental water samples and soil leaching solution (SLS) is also realized without separation pretreatment. The developed VMSF/p-GCE sensor demonstrated advantages of simple structure, high sensitivity, good antifouling performance, and great potential in direct electroanalysis of endocrine-disrupting compounds in complex samples.

Multiclass determination of endocrine disruptors in urine by hollow fiber microporous membrane and liquid chromatography

A simple and rapid methodology was developed using hollow fiber membrane microporous and a 96-well plate system for a high throughput multiclass determination of endocrine disruptors in human urine (diclofenac, diazepam, carbamazepine, ibuprofen, naproxen, carbofuran, methyl parathion, 17-α-ethynyl estradiol, bisphenol A and benzophenone). The quantification and detection of the chemicals were carried out by an HPLC-diode array detector. The fixed conditions for carrying out the method optimization were 1.5 mL of sample and 300 μL of solvent desorption. Multivariate and univariate models were applied to optimize the parameters of the method, achieving the following conditions: 20% diluted urine, 1-octanol of extraction solvent impregnated in the microporous membrane, 70 min extraction in pH 3.0 and 30 min with a mixture of 75% methanol and 25% acetonitrile (v/v) for the desorption. The R² were ≤ 0.9973 for ibuprofen. The LOD ranged from 3.3 to 16.7 ng mL^-1 and the LOQ from 10 to 50 ng mL^-1. Relative recoveries ranged from 71% to 126%. The repeatability (n = 3) ranged from 0.22% to 12.01%, and the intermediate precision (n = 9) ranged from 0.13% to 17.76%. The method presents a good alternative for the determination of different classes of compounds in human urine.

Green Extraction Techniques as Advanced Sample Preparation Approaches in Biological, Food, and Environmental Matrices: A Review

Green extraction techniques (GreETs) emerged in the last decade as greener and sustainable alternatives to classical sample preparation procedures aiming to improve the selectivity and sensitivity of analytical methods, simultaneously reducing the deleterious side effects of classical extraction techniques (CETs) for both the operator and the environment. The implementation of improved processes that overcome the main constraints of classical methods in terms of efficiency and ability to minimize or eliminate the use and generation of harmful substances will promote more efficient use of energy and resources in close association with the principles supporting the concept of green chemistry. The current review aims to update the state of the art of some cutting-edge GreETs developed and implemented in recent years focusing on the improvement of the main analytical features, practical aspects, and relevant applications in the biological, food, and environmental fields. Approaches to improve and accelerate the extraction efficiency and to lower solvent consumption, including sorbent-based techniques, such as solid-phase microextraction (SPME) and fabric-phase sorbent extraction (FPSE), and solvent-based techniques (μQuEChERS; micro quick, easy, cheap, effective, rugged, and safe), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), in addition to supercritical fluid extraction (SFE) and pressurized solvent extraction (PSE), are highlighted.

Application of the QuEChERS Strategy as a Useful Sample Preparation Tool for the Multiresidue Determination of Pyrrolizidine Alkaloids in Food and Feed Samples: A Critical Overview

The identification of concerning high levels of pyrrolizidine alkaloids (PAs) in a wide variety of food products has raised the occurrence of these natural toxins as one of the main current issues of the food safety field. Consequently, a regulation with maximum concentration levels of these alkaloids has recently been published to monitor their occurrence in several foodstuffs. According to legislation, the analytical methodologies developed for their determination must include multiresidue extractions with high selectivity and sensitivity, as a set of 21 + 14 PAs should be simultaneously monitored. However, the multiresidue extraction of these alkaloids is a difficult task due to the high complexity of food and feed samples. Accordingly, although solid-phase extraction is still the technique most widely used for sample preparation, the QuEChERS method can be a suitable alternative for the simultaneous determination of multiple analytes, providing green extraction and clean-up of samples in a quick and cost-effective way. Hence, this review proposes an overview about the QuEChERS concept and its evolution through different modifications that have broadened its applicability over time, focusing mainly on its application regarding the determination of PAs in food and feed, including the revision of published works within the last 11 years.

QuEChERS extraction for quantitation of bitter acids and xanthohumol in hops by HPLC-UV

We hypothesised that QuEChERS could be successfully applied to the extraction of bitter acids and xanthohumol from hops, which would be less time consuming, cheaper, and more eco-friendly by the severe reduction of solvent use. High performance liquid chromatography was used to separate the compounds after extraction and quantitation was evaluated against standard calibration curves for bitter acids prepared from an International calibration extract (ICE-4) and an authentic standard of xanthohumol. The standard QuEChERS method was compared to mini and micro-versions including clean-up and spiking procedures. The quantitative analyzes indicate the applicability of the QuEChERS method for the quantitation of bitter acids compared to Soxhlet extraction. The statistical data confirm reproducibility of the total alpha- and beta- acids measured by the standard method and the modified mini- and micro-QuEChERS procedures. Our hypothesis is supported by the data described and is consistent with other previous methods described in the literature.

Recent advances in analysis of bisphenols and their derivatives in biological matrices

Biomonitoring is a very useful tool to evaluate human exposure to endocrine-disrupting compounds (EDCs), like bisphenols (BPs), which are widely used in the manufacture of plastics. The development of reliable analytical methods is key in the field of public health surveillance to obtain biomonitoring data to determine what BPs are reaching people's bodies. This review discusses recent methods for the quantitative measurement of bisphenols and their derivatives in biological samples like urine, blood, breast milk, saliva, and hair, among others. We also discuss the different procedures commonly used for sample treatment, which includes extraction and clean-up, and instrumental techniques currently used to determine these compounds. Sample preparation techniques continue to play an important role in the analysis of complex matrices, for liquid matrices the most commonly employed is solid-phase extraction, although microextraction techniques are gaining importance in this field, and for solid samples ultrasound-assisted extraction. The main instrumental techniques used are liquid and gas chromatography coupled with mass spectrometry. Finally, we present data on the main parameters obtained in the validation of the revised methods. This review focuses on various methods developed and applied for trace analysis of bisphenols, their conjugates, halogenated derivatives, and diglycidyl ethers in biological samples to enable the required selectivity and sensitivity. For this purpose, a review is carried out of the most recent relevant publications from 2016 up to present.

Miniaturized multiresidue method for the analysis of pesticides and persistent organic pollutants in non-target wildlife animal liver tissues using GC-MS/MS

In order to gain a better insight into pesticide and pollutant exposure of small (non-target) wildlife animals, a QuEChERS sample preparation method was first developed for 5 g liver tissues (e.g. hedgehog samples) and then downscaled for the analysis of 100 mg liver tissues (e.g. bat samples). The optimized (micro) QuEChERS methods used 1% acetic acid in acetonitrile as organic solvent for liquid-liquid extraction (LLE) and salting out was performed with anhydrous magnesium sulfate and sodium acetate (4:1). After a freezing-out step, sample clean-up was carried out with anhydrous magnesium sulfate, PSA, C₁₈, and GCB (150:25:20:5). Overall, 209 pesticides and persistent organic pollutants (POPs) can be analysed within each sample with gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). Both methods were validated with representative analytes according to the European Commission guideline SANTE/12682/2019. Limits of quantification were between 1 and 20 μg kg^-1, and the methods proved to be linear up to 400 μg kg^-1. Additionally, the analytes delivered satisfactory results regarding recovery and precision. As proof of concept, samples of six hedgehog livers were analysed with both methods to prove the accuracy of the micro QuEChERS method. Additionally, six livers of different bat species were analysed with the downscaled method. The newly developed micro QuEChERS method for multiresidue analysis requires only minute amounts of biomaterial and represents a sophisticated novel technique for determining the exposure of small wildlife animals to different contaminants.

Development and validation of an ultra performance liquid chromatography-tandem mass spectrometry method for twelve bisphenol compounds in animal feed

Bisphenol compounds (BPs) are a group of environmental contaminants with endocrine-disrupting effects both for humans and animals. The present work developed a sensitive analytical method for the detection of multiple BPs in the animal feed based on ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) with post-column ammonium hydroxide (NH₄OH) infusion. A modified QuEChERS method was incorporated into the extraction and purification processes. The limit of detection (LODs) and quantification (LOQs) for the target BPs were in the ranges of 0.02-0.75 μg kg^-1 and 0.04-0.95 μg kg^-1, respectively. Average recoveries were ranged between 82.6% and 112%. The proposed method was successfully applied to determine the concentrations of BPs in 20 actual feed samples, and the preliminary profiles of BPs in products from local feed factories were obtained. Each sample was simultaneously contaminated with at least 2 to 4 BPs, and bisphenol A (BPA) was the dominant analog of BPs found in animal feed.

Nitrogen-Doped Graphdiyne as a Robust Electrochemical Biosensing Platform for Ultrasensitive Detection of Environmental Pollutants

Owing to its unique chemical structure, natural pores, high structure defects, good surface hydrophilicity and biocompatibility, and favorable electrical conductivity, nitrogen-doped graphdiyne (NGDY) has been attracting attention in the application of electrochemical sensing. Taking advantage of these fascinating electrochemical properties, for the first time, two types of electrochemical enzymatic biosensors were fabricated for the respective detection of organophosphorus pesticides (OPs) and phenols based on the immobilization of acetylcholinesterase or tyrosinase with NGDY. Results revealed that the sensitivities of the NGDY-based enzymatic biosensors were almost twice higher than that of the matching biosensor in the absence of NGDY, proving that NGDY plays a vital role in immobilizing the enzymes and improving the performance of the fabricated biosensors. The effects of nitrogen doping on improving the biosensing performance were studied in depth. Graphitic N atoms can enhance the electrical conductivity, while imine N and pyridinic N can help to adsorb and accumulate the substance molecules to the electrode surface, all of which contribute to the significantly improved performance. Furthermore, these two types of biosensors also demonstrated excellent reproducibility, high stability, and good recovery rate in real environmental samples, which showed a valuable way for the rapid detection of OPs and phenols in the environment. With these excellent performances, it is strongly anticipated that NGDY has tremendous potential to be applied to many other biomedical and environmental fields.

Simultaneous fluorescence determination of bisphenol A and its halogenated analogs based on a molecularly imprinted paper-based analytical device and a segment detection strategy

Bisphenol A (BPA) and its halogenated analogs tetrabromobisphenol A (TBBPA) and tetrachlorobisphenol A (TCBPA) are common environmental contaminants and a method for their simultaneous determination is urgently needed. A paper-based analytical device (PAD) was prepared using a metal-organic framework of UiO-66-NH₂ coated with molecularly imprinted polymers (MIPs) using TBBPA as a template. The maximum adsorption capacity was 120.94 mg g^-1 and the imprinting factor was 4.07. The selective recognition ability of this PAD enabled the effective separation of TBBPA, TCBPA and BPA based on paper chromatography. Subsequently, the PAD cut into segments were used individually to determine the presence of target chemicals using a highly sensitive fluorescent method. Under ultraviolet light irradiation, UiO-66-NH₂ acts as a photocatalyst to produce reactive oxygen species (ROS) that degrade TBBPA, TCBPA or BPA in the imprinted cavities and the fluorescent signal of 2',7'-dichlorodihydrofluorescein diacetate (H₂DCFDA) added as a ROS probe enabled the indirect determination of target chemicals. This method could determine BPA and its halogenated analogs in dust samples simultaneously with detection limits ranging from 0.14 to 0.30 ng g^-1. The intraday relative standard deviation (RSD) was ≤6.8% and interday RSD was ≤8.1%. The recoveries ranged from 91.0 to 105.6% with RSD values that were ≤7.5%. The results stemmed from this method were consistent with those obtained from LC-MS/MS. It is an environmentally-friendly approach due to the degradation of target pollutants and possesses many advantages such as high selectivity, low cost and easy-to-fabrication.

Effect of Pretreatment on Detection of 37 Pesticide Residues in Chrysanthemum indicum

This study aimed to develop a method, followed by gas chromatography-mass spectrometry, for detecting 37 pesticides in Chrysanthemum indicum (C. indicum) and investigating the decrease in the matrix-induced enhancement effect. The influence of QuEChERS extraction and matrix solid-phase dispersion (MSPD) on the recovery and matrix effect (ME) was compared. extraction and matrix solid-phase dispersion (MSPD) on the recovery and matrix effect (ME) was compared to decrease the ME. The cleanup sorbents, volume and type of solvent, and treatment time were optimized. The accuracy (as recovery), precision (as relative standard deviation, RSD), linearity, limit of quantitation, and limit of detection were determined. The recoveries at the three levels using mixed standard solution ranged between 76% and 120% with RSD ≤15%, and 76% and 120% with RSD ≤11% for MSPD and QuEChERS extraction, respectively. The results suggested that the ME for 21 pesticides was in the range of 80%-120% after MSPD and 15% after QuEChERS extraction. QuEChERS extraction was simpler and faster than MSPD. This methodology was applied in the analysis of 27 C. indicum samples; phorate was most frequently detected (63.0% of the sample).

Assessment of different isotope dilution strategies and their combination with switchable solvent-based liquid phase microextraction prior to the quantification of bisphenol A at trace levels via GC-MS

Different isotope dilution strategies were evaluated to quantify bisphenol A. High accuracy and precision were achieved by SS-LPME and ID⁴ combination.

Preparation of polypyrrole/nanosilica composite for solid-phase microextraction of bisphenol and phthalates migrated from containers to eye drops and injection solutions

This paper describes the electrodeposition of polyphosphate-doped polypyrrole/nanosilica nanocomposite coating on steel wire for direct solid-phase microextraction of bisphenol A and five phthalates. We optimized influencing parameters on the extraction efficiency and morphology of the nanocomposite such as deposition potential, concentration of pyrrole and polyphosphate, deposition time and the nanosilica amount. Under the optimized conditions, characterization of the nanocomposite was investigated by scanning electron microscopy and Fourier transform infra-red spectroscopy. Also, the factors related to the solid-phase microextraction method including desorption temperature and time, extraction temperature and time, ionic strength and pH were studied in detail. Subsequently, the proposed method was validated by gas chromatography-mass spectrometry by thermal desorption and acceptable figures of merit were obtained. The linearity of the calibration curves was between 0.01 and 50 ng/mL with acceptable correlation coefficients (0.9956-0.9987) and limits of detection were in the range 0.002-0.01 ng/mL. Relative standard deviations in terms of intra-day and inter-day by five replicate analyses from aqueous solutions containing 0.1 ng/mL of target analytes were in the range 3.3%-5.4% and 5%-7.1%, respectively. Fiber-to-fiber reproducibilities were measured for three different fibers prepared in the same conditions and the results were between 7.3% and 9.8%. Also, extraction recoveries at two different concentrations were ≥96%. Finally, the suitability of the proposed method was demonstrated through its application to the analysis of some eye drops and injection solutions.

QuEChERS - Fundamentals, relevant improvements, applications and future trends

The Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method is a simple and straightforward extraction technique involving an initial partitioning followed by an extract clean-up using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS approach was developed for recovering pesticide residues from fruits and vegetables, but rapidly gained popularity in the comprehensive isolation of analytes from different matrices. According to PubMed, since its development in 2003 up to November 2018, about 1360 papers have been published reporting QuEChERS as extraction method. Several papers have reported different improvements and modifications to the original QuEChERS protocol to ensure more efficient extractions of pH-dependent analytes and to minimize the degradation of labile analytes. This analytical approach shows several advantages over traditional extraction techniques, requiring low sample and solvent volumes, as well as less time for sample preparation. Furthermore, most of the published studies show that the QuEChERS protocol provides higher recovery rate and a better analytical performance than conventional extraction procedures. This review proposes an updated overview of the most recent developments and applications of QuEChERS beyond its original application to pesticides, mycotoxins, veterinary drugs and pharmaceuticals, forensic analysis, drugs of abuse and environmental contaminants. Their pros and cons will be discussed, considering the factors influencing the extraction efficiency. Whenever possible, the performance of the QuEChERS is compared to other extraction approaches. In addition to the evolution of this technique, changes and improvements to the original method are discussed.