Rapid determination of sulfonamides in chicken using two-dimensional online cleanup mode with three columns coupled to liquid chromatography-tandem mass spectrometry

A high-throughput UPLC-MS-MS Bio-analytical method for the analysis of veterinary pharmaceutical residues in Chicken Tissues, Application of efficient-valid-green (EVG) Framework as a Competence Tool

Antibacterial medications are receiving the most attention due to hypersensitivity reactions and the emergence of bacterial mutants resistant to antibiotics. Treating Animals with uncontrolled amounts of antibiotics will extend beyond their lives and affect humans. This study aims to determine the concentration of the residues of sulfadimidine, sulfaquinoxaline, diaveridine, and vitamin K3 in the tissues of poultry (muscles and liver) after treatment with the combined veterinary formulation. A UPLC-MS-MS method was developed using Poroshell 120 ECC18 and a mobile phase composed of acetonitrile and distilled water, containing 0.1 % formic acid, in the ratio of (85:15 v/v) at a flow rate of 0.6 mL/min. Sample extraction solvent was optimized using response surface methodology (RSM) to be acetonitrile: methanol in the ratio (49.8: 50.2 v/v), and the method was validated according to the FDA bioanalytical method validation protocol over the range (50-1000 µg/Kg) for sulfaquinoxaline and (50-750 µg/Kg) for the other 3 drugs. The greenness of the sample preparation and analytical method was assessed by applying Analytical Eco-scale (AES) and AGREE coupled with AGREEprep. The Competence of the study was evaluated via the EVG framework known as Efficiency, validation, and greenness, to achieve a balance point represented by a radar chart. The method was applied to decide the time required for poultry products to be safe for human use after administration of the studied drugs. It was found that, after the administration of the last dose, minimally 7 days are required till the levels of the drugs drop to the maximum residue limit determined by the FDA/WHO in animal tissues.

Strategies for studying in vivo biochemical formation pathways and multilevel distributions of sulfanilamide metabolites in food (2012-2022)

Sulfonamide metabolites are a major source of food pollution worldwide. However, the formation of internal sulfanilamide metabolites has only been investigated for selected compounds. In this paper, the fragmentation mechanism and characteristic ions of sulfonamide metabolites are reviewed using density functional theory and Q-Orbitrap high-resolution mass spectrometry. The result of the protonation site, rearrangement and bond breaking induced fragmentations at C₆H₆NO₂S⁺m/z 156.01138, C₆H₆NO⁺m/z 108.04439, and C₆H₆N⁺m/z 92.04948. Mass shifts are calculated for derivative metabolites, including hydrogenation, acetylation, oxidation, glucosylation, glucosidation, sulfation, deamination, formylation, desulfonation and O-aminomethylation. Given their homologous series, it is demonstrated that similar metabolic reactions occur for all sulfonamides. The suspicious sulfonamide metabolites are confirmed by d-labelling experiments and reference standards. This is the first review of the latest advances in the field of sulfonamide metabolite prediction (2012-2022), and scheme design for metabolite multirresidue screening, as well as the challenges in the mass spectrometry evolution.

Sensitivity of photoelctrocehmical aptasensor using spiral nanorods for detecting antiobiotic levels in experimental and real samples

Given increasing concern regarding antibiotic environmental contamination, there is immediate need to monitor antibiotic levels to effectively control pollution. In this study, we used a photoelectrochemical aptasensor based on TiO₂@MoS₂ spiral nanoarrays to detect chloramphenicol (CAP) in antibiotics. Nanoarrays were directly grown on fluorine-doped tin oxide (FTO) conductive glass with excellent biochemical stability, while aptamer-SH were immobilized by chemical binding on a synthetic TiO₂@MoS₂ nanoarray. Results show that the photocurrents were reduced in the presence of photoelectrochemistry associated with specific selection of aptamer for CAP. When the measurement of the fabricated nanomaterial chip was carried out using a three-electrode system, we found a highly specific and stable detection of chloramphenicol that ranged between 0.1 pM and 1 μM, with the detection limit of 0.1 pM. In addition, we obtained satisfactory results when real sample were used to validate the potential of photoelectrochemical (PEC) aptasensor for detecting chloramphenicol content in milk. Our results demonstrate that photoelectrochemical aptasensor is conducive to the development of less toxic multifunctional nanomaterials, making the biosensor more robust and environmentally friendly. Therefore, photoelectrochemical aptasensor can be widely applied in the field of environmental monitoring.

Sulfonamide-Selective Ambient Mass Spectrometry Ion Source Obtained by Modification of an Iron Sheet with a Hydrophilic Molecularly Imprinted Polymer

We have described a sulfonamide-selective ambient ion source coupled with electrospray ionization mass spectrometry (ESI-MS) for selective extraction and determination of trace sulfonamide antibiotics. It is obtained by modifying an iron sheet with a sulfadiazine-templated hydrophilic molecularly imprinted polymer (SF-HMIP). It behaves as both an online extractor and a MS ion source. Five sulfonamide antibiotics, including sulfamethoxazole (SMZ), sulfamerazine (SMR), sulfisoxazole (SIZ), sulfathiazole (ST), and sulfameter (SMD), were chosen to evaluate SF-HMIP coupled with ESI-MS, which showed good linearity in the range of 0.2-1000 ng/mL with correlation coefficient values (R²) over 0.9946. The limits of detection (LODs) for analysis of pure water and honey were in the range of 0.1-0.2 and 0.2-1.5 ng/mL, respectively. Limits of quantitation (LOQs) for analysis of pure water and honey were in the range of 0.3-0.5 and 1.0-5.0 ng/mL, respectively. The results demonstrated that SF-HMIP combined with ESI-MS could be applied for the direct analysis of five trace sulfonamide compounds in honey and pure water with recoveries ranging from 76 to 129%.

Accurate Quantification of Sulfonamide Metabolites in Goat Meat: A New Strategy for Minimizing Interaction between Sheep Serum Albumin and Sulfonamide Metabolites

To date, the determination of sulfonamide metabolites in animal-derived food has universal disadvantages of low throughput and no integrated metabolites involved. In this study, a powerful and reliable strategy for high-throughput screening of sulfonamide metabolites in goat meat was proposed based on an aqueous two-phase separation procedure (ATPS) combined with ultrahigh-performance liquid chromatography quadrupole-Orbitrap high-resolution mass spectrometry (UHPLC-Q-Orbitrap). Noncovalent interactions including van der Waals force, hydrogen bonding, and hydrophobic effect were determined to be staple interactions between the sulfonamide metabolites and sheep serum albumin by fluorescence spectroscopy and molecular docking technology, and an 80% acetonitrile-water solution/(NH₄)₂SO₄ was used as ATPS in order to release combined sulfonamide metabolites and minimize the influence of sheep serum albumin. Sulfonamide metabolites in the matrix were screened based on a mechanism of mass natural loss and core structure followed by identification combined with the pharmacokinetic. The developed strategy was validated according to EU standard 2002/657/EC with CCα ranging from 0.07 to 0.98 μg kg^-1, accuracy recovery with 84-107%, and RSDs lower than 8.9%. Eighty seven goat meat samples were used for determination of 26 sulfonamides and 8 potential metabolites. On the basis of the established innovative process, this study has successfully implemented the comprehensive detection of sulfonamide metabolites, including N⁴-acetylated substitution, N⁴-hydroxylation, 4-nitroso, azo dimers, oxidized nitro, N⁴ monoglucose conjugation, β-d-glucuronide, and N-4-aminobenzenesulfonyl metabolites, which were shown to undergo oxidation, hydrogenation, sulfation, glucuronidation, glucosylation, and O-aminomethylation.

Nanohybrid magnetic composite optosensing probes for the enrichment and ultra-trace detection of mafenide and sulfisoxazole

Nanohybrid magnetic optosensing probes were designed and fabricated to enrich and detect ultra-trace levels of mafenide and sulfisoxazole simultaneously. The probes combined the high affinity of MIL-101 and the sensitivity of graphene quantum dots (GQDs) and cadmium telluride quantum dots (CdTe QDs) with the selectivity and rapid separation provided by a magnetic molecularly imprinted polymer (MMIP). Since the MIL101-MMIP-GQD and MIL101-MMIP-CdTe QD probes produced high fluorescence emission intensities at 435 and 572 nm, respectively, mafenide and sulfisoxazole could be simultaneously detected. Quantitative analysis was based on fluorescence quenching produced by binding between target molecules and imprinted recognition cavities. In the optimal experimental condition, emission intensity was quenched linearly with increasing analyte concentration from 0.10 to 25.0 μg L^-1. Limit of detection was 0.10 μg L^-1 for mafenide and sulfisoxazole. The developed optosensor was applied to detect ultra-trace amounts of mafenide and sulfisoxazole in bovine milk. Recoveries of mafenide and sulfisoxazole in spiked bovine milk ranged from 80.4 to 97.9% with RSDs <5% and the analysis results agreed well with HPLC analysis. The proposed probes provided excellent sensitivity, selectivity, ease and convenience of use.

Validation of a universal and highly sensitive two-dimensional liquid chromatography-tandem mass spectrometry methodology for the quantification of pyrazinamide, ethambutol, protionamide, and clofazimine in different biological matrices

A novel and potent anti-tuberculosis drug combination pyrazinamide (PZA), ethambutol (EMB), protionamide (PTO), and clofazimine (CFZ) that rapidly kills Mycobacterium tuberculosis (Mtb) in the lungs has been identified using the artificial-intelligence-enabled parabolic response surface approach. A universal and highly sensitive two-dimensional liquid chromatography-tandem mass spectrometry (2D-LC-MS/MS) method for the simultaneous determination of PZA, EMB, PTO, and CFZ in various biological samples in different states (liquid samples: plasma, bile, and urine; solid samples: tissue and feces) using simple pretreatment was established and validated. For the first dimension of this column-switching arrangement, the automated purification and enrichment of the drugs were achieved on a Polar-RP column. The subsequent analytical separation was performed on an Agilent Zorbax SB-Aq column, and the total loop time was 7.5 min. The positive-ionization mode with multiple reaction monitoring was used for detection. The sensitivity was good with no carry-over detected, and the lower limit of quantification ranged from 100 to 500 pg/mL. This quantification method was fully validated and proved to be robust in accordance with US Food and Drug Administration guidelines. High recoveries (85.3-111.4%) and accuracies (92.1-109.3%), together with high precision values (0.5-13.8%), were verified in all matrices. All standard curves showed favorable linearities with r2 > 0.995. This validated method was applied to study plasma pharmacokinetics, tissue distribution, and excretion in Sprague-Dawley rats after oral administration of the drug combination.

NH2-MIL-53(Al) Polymer Monolithic Column for In-Tube Solid-Phase Microextraction Combined with UHPLC-MS/MS for Detection of Trace Sulfonamides in Food Samples

In this study, a novel monolithic capillary column based on a NH2-MIL-53(Al) metal-organic framework (MOF) incorporated in poly (3-acrylamidophenylboronic acid/methacrylic acid-co-ethylene glycol dimethacrylate) (poly (AAPBA/MAA-co-EGDMA)) was prepared using an in situ polymerization method. The characteristics of the MOF-polymer monolithic column were investigated by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffractometry, Brunauer-Emmett-Teller analysis, and thermogravimetric analysis. The prepared MOF-polymer monolithic column showed good permeability, high extraction efficiency, chemical stability, and good reproducibility. The MOF-polymer monolithic column was used for in-tube solid-phase microextraction (SPME) to efficiently adsorb trace sulfonamides from food samples. A novel method combining MOF-polymer-monolithic-column-based SPME with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) was successfully developed. The linear range was from 0.015 to 25.0 µg/L, with low limits of detection of 1.3-4.7 ng/L and relative standard deviations (RSDs) of < 6.1%. Eight trace sulfonamides in fish and chicken samples were determined, with recoveries of the eight analytes ranging from 85.7% to 113% and acceptable RSDs of < 7.3%. These results demonstrate that the novel MOF-polymer-monolithic-column-based SPME coupled with UHPLC-MS/MS is a highly sensitive, practical, and convenient method for monitoring trace sulfonamides in food samples previously extracted with an adequate solvent.