Simultaneous determination of polybrominated diphenyl ethers and hydroxylated analogues in human serum using high-performance liquid chromatography-inductively coupled plasma mass spectrometry

Chemical contaminants in blood and their implications in chronic diseases

Artificial chemical products are widely used and ubiquitous worldwide and pose a threat to the environment and human health. Accumulating epidemiological and toxicological evidence has elucidated the contributions of environmental chemical contaminants to the incidence and development of chronic diseases that have a negative impact on quality of life or may be life-threatening. However, the pathways of exposure to these chemicals and their involvements in chronic diseases remain unclear. We comprehensively reviewed the research progress on the exposure risks of humans to environmental contaminants, their body burden as indicated by blood monitoring, and the correlation of blood chemical contaminants with chronic diseases. After entering the human body through various routes of exposure, environmental contaminants are transported to target organs through blood circulation. The application of the modern analytical techniques based on human plasma or serum specimens is promising for determining the body burden of environmental contaminants, including legacy persistent organic pollutants, emerging pollutants, and inorganic elements. Furthermore, their body burden, as indicated by blood monitoring correlates with the incidence and development of metabolic syndromes, cancers, chronic nervous system diseases, cardiovascular diseases, and reproductive disorders. On this basis, we highlight the urgent need for further research on environmental pollution causing health problems in humans.

Update of the risk assessment of polybrominated diphenyl ethers (PBDEs) in food

The European Commission asked EFSA to update its 2011 risk assessment on polybrominated diphenyl ethers (PBDEs) in food, focusing on 10 congeners: BDE-28, -47, -49, -99, -100, -138, -153, -154, -183 and ‑209. The CONTAM Panel concluded that the neurodevelopmental effects on behaviour and reproductive/developmental effects are the critical effects in rodent studies. For four congeners (BDE-47, -99, -153, -209) the Panel derived Reference Points, i.e. benchmark doses and corresponding lower 95% confidence limits (BMDLs), for endpoint-specific benchmark responses. Since repeated exposure to PBDEs results in accumulation of these chemicals in the body, the Panel estimated the body burden at the BMDL in rodents, and the chronic intake that would lead to the same body burden in humans. For the remaining six congeners no studies were available to identify Reference Points. The Panel concluded that there is scientific basis for inclusion of all 10 congeners in a common assessment group and performed a combined risk assessment. The Panel concluded that the combined margin of exposure (MOET) approach was the most appropriate risk metric and applied a tiered approach to the risk characterisation. Over 84,000 analytical results for the 10 congeners in food were used to estimate the exposure across dietary surveys and age groups of the European population. The most important contributors to the chronic dietary Lower Bound exposure to PBDEs were meat and meat products and fish and seafood. Taking into account the uncertainties affecting the assessment, the Panel concluded that it is likely that current dietary exposure to PBDEs in the European population raises a health concern.

Miniaturized method for the quantification of persistent organic pollutants and their metabolites in HepG2 cells: assessment of their biotransformation

Biotransformation can greatly influence the accumulation and, subsequently, toxicity of substances in living beings. Although traditionally these studies to quantify metabolization of a compound have been carried out with in vivo species, currently, in vitro test methods with very different cell lines are being developed for their evaluation. However, this is still a very limited field due to multiple variables of a very diverse nature. So, an increasing number of analytical chemists are working with cells or other similar biological samples of very small size. This makes it necessary to address the development of analytical methods that allow determining their concentration both inside the cells and in their exposure medium. The aim of this study is to develop a set of analytical methodologies for the quantification of polycyclic aromatic hydrocarbons, PAHs (phenanthrene, PHE), and polybrominated diphenyl ethers, PBDEs (2,2',4,4'-tetrabromodiphenyl ether, BDE-47), and their major metabolites in cells and their exposure medium. Analytical methodologies, based on miniaturized ultrasound probe-assisted extraction, gas chromatography-mass spectrometry-microelectron capture detector (GC-MS-µECD), and liquid chromatography-fluorescence detector (LC-FL) determination techniques, have been optimized and then applied to a biotransformation study in HepG2 at 48 h of exposure. Significant concentrations of the major metabolites of PHE (1-OH, 2-OH, 3-OH, 4-OH-, and 9-OH-PHE) and BDE-47 (5-MeO-, 5-OH-, and 3-OH-BDE-47) were detected and quantified inside the cells and in the exposure medium. These results provide a new method for determination and improve information on the metabolization ratios for a better knowledge of the metabolic pathways and their toxicity.

Online solid-phase extraction based on size-controllable spherical covalent organic framework for efficient determination of polybrominated diphenyl ethers in foods

An analytical method of microspheric brominated covalent organic framework (Br-COF)-online solid-phase extraction integrated with high-performance liquid chromatography (online SPE-HPLC) was proposed for efficiently enriching six polybrominated diphenyl ethers (PBDEs) in foods. The Br-COF microspheres were facilely prepared with uniformity and dispersion by a size-controllable synthesis at the room temperature. Attributed to multiple interactions of the halogen bonding, Van der Waals forces, hydrophobic interaction along with size-matching effect, Br-COF performed satisfactory extraction capacity for PBDEs compared with commercial adsorbents. Five primary influencing factors were optimized, including loading solvent, loading flow rate, elution solvent, elution flow rate and elution volume. Under the optimal parameters, the implement displayed excellent linear ranges (0.5-500 ng mL^-1) and low detection limits (0.01-0.05 ng mL^-1). The relative recoveries in six spiked food samples ranged from 87.8 to 119.7 % with relative standard deviations below 10 %. This research estabished a promising platform for quantitatively determining trace PBDEs in complex foods.

Bioaccumulation and Biotransformation of BDE-47 Using Zebrafish Eleutheroembryos (Danio rerio)

Polybrominated diphenyl ethers (PBDEs) are well-known endocrine disrupting chemicals identified as organic persistent pollutants. Their metabolites OH-BDE and MeO-BDE have been reported to be potentially more toxic than the postulated precursor PBDEs. One of the most predominant congeners of PBDEs in the environment is BDE-47, due to its high presence in industrially used mixtures. In the present study, the bioaccumulation and biotransformation of BDE-47 into its major metabolites is evaluated using zebrafish (Danio rerio) eleutheroembryos adapting a previously developed alternative method to bioconcentration official guideline Organisation for Economic Co-ordination and Development 305, which reduces the animal suffering, time, and cost. For the simultaneous determination of BDE-47 and its metabolites in larvae and exposure medium, and considering the polarity difference of the analytes and the small sample size, the development of a validated analytical method is a step to ensure quality results. In the present study, an ultrasound-assisted extraction followed by a solid phase extraction dispersive clean-up step and gas chromatography-mass spectrometry-microelectron capture detector (GC-MS-μECD) with a previous derivatization process was optimized and validated. Bioconcentration factors (BCFs) were calculated using a first-order one-compartment toxicokinetic model. The profiles found show rapid absorption in the first hours of larval development and great bioaccumulative capacity, finding BCFs of 7294 ± 899 and 36 363 ± 5702 at nominal concentrations of 10 and 1 μg L^-1 , respectively. Metabolization studies show increasing concentrations of the metabolites BDE-28, 2'-OH-BDE-28, and 5-MeO-BDE-47 throughout the exposure time. The results obtained show the feasibility of the method for bioaccumulation and open up the possibility of metabolic studies with zebrafish eleutheroembryos, which is a very underdeveloped field without official testing or regulation. Environ Toxicol Chem 2023;42:835-845. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Sheathed in-situ room-temperature growth covalent organic framework solid-phase microextraction fiber for detecting ultratrace polybrominated diphenyl ethers from environmental samples

The extraction performance of solid-phase microextraction (SPME) fiber is significantly influenced by coating materials and fabricating process. It is urgently needed for fabricating robust SPME fiber with facile preparation methods. Herein, a novel polyimide (PI) @ covalent organic framework (COF) synthesized by 1,3,5-Tris (4-aminophenyl) benzene (TPB) and 2,5-dimethoxyterephthalaldehyde (DMTP) fiber, named PI@TPB-DMTP fiber, was successfully fabricated with facile method at room temperature. Firstly, a COF crystals TPB-DMTP was in situ grown on stainless steel fiber, where the COF crystals was synthesized by the Schiff-base reaction between TPB and DMTP. Subsequently, the COF coating was covered with an ultrathin layer of PI through a simple dip-coating method to improve the fiber stability. By coupled PI@TPB-DMTP SPME fiber with gas chromatography-negative chemical ion-mass spectrometry (GC-NCI-MS), a sensitive analytical method was established for the determination of ultratrace polybrominated diphenyl ethers (PBDEs) in water sample. To achieve the best efficiency and sensitivity for the analysis of PBDEs, six potential influencing factors in extraction step and desorption step were optimized. Under optimized conditions, the established method showed high enhancement factors of 1470-3555, wide linear range of 0.05-100 ng L^-1, low detection limits of 0.0083-0.0190 ng L^-1, good repeatability for intra-day in the range of 3.71%-7.62% and inter-day in the range of 5.12%-8.81%, good reproducibility in the range of 6.83%-9.21%. The satisfactory recovery was ranged from 79.2% to 117.3% in determining real water samples. The excellent experimental performance was mainly attributed to the large specific surface area of TPB-DMTP, as well as the high permeability of porous PI film. The results demonstrated that the COF-based fiber showed great potential for analysis of PBDEs in complex environmental samples.

Aspartic acid assisted one-step synthesis of stable CsPbX3@Asp-Cs4PbX6 by in situ growth in NH2-MIL-53 for ratiometric fluorescence detection of 4-bromophenoxybenzene

A molecularly imprinted ratiometric fluorescent sensor was synthesized for the detection of 4-bromophenoxybenzene (BDE-3) based on perovskite quantum dots and metal organic framework. First, aspartic acid (Asp) was introduced during the synthesis of perovskite CsPbX₃ for the formation of a core-shell structure of CsPbX₃@Asp-Cs₄PbX₆. Due to the protection of the shell layer Cs₄PbX₆, the stability of the core CsPbX₃ was improved significantly. Compared to CsPb(BrI)₃, the ultraviolet and thermal stabilities of CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ were increased by 26 times and 32 times, respectively, and, compared to CsPbBr₃, these stabilities of CsPbBr₃@Asp-Cs₄PbBr₆ were increased by 3 times and 13 times, respectively. The water stabilities of CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ and CsPbBr₃@Asp-Cs₄PbBr₆ were greatly improved too. Then, a ratiometric fluorescence sensor was constructed by in situ growth of CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ in metal organic framework (NH₂-MIL-53) for the detection of BDE-3, in which the orange fluorescence of CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ (614 nm) was regarded as the reference signal and the cyan fluorescence of NH₂-MIL-53 (494 nm) was used as the fluorescence response signal. To improve the selectivity of the sensor, the molecular imprinting polymer (MIP) was modified on the NH₂-MIL-53 and an imprinting factor of 3.17 was obtained. Under 365 nm light excitation, the fluorescent response signal at 494 nm was quenched gradually by BDE-3 in the range 11.4 to 68.5 nmol/L, while the reference signal at 614 nm remained unchanged. The limit of detection and limit of quantification were 3.35 and 11.2 nmol/L, respectively, and the fluorescent color of the sensor changed gradually from cyan to green to orange, which illustrated that the developed sensor has an ability to recognize BDE-3 specifically, a good anti-interference ability, and a sensitively visual detection ability. Moreover, the sensor was successfully applied to the BDE-3 detection in polyethylene terephthalate plastic bottle, polyvinyl chloride plastic bag, and circuit board with satisfactory recoveries (96.3-108.1%) and low relative standard deviations (5%). The preparation processes of NH₂-MIL-53, NH₂-MIL-53-CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆, and the MIP-NH₂-MIL-53-CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ composites.

Effective enrichment and detection of trace polybrominated diphenyl ethers in water samples based on magnetic covalent organic framework nanospheres coupled with chromatography-mass spectrometry

Novel core shell structured magnetic covalent organic frameworks were synthesized at room temperature and first applied in water samples for the enrichment of trace polybrominated diphenyl ethers (PBDEs) through magnetic solid-phase extraction. The prepared materials were characterized through transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometer and X-ray photoelectron spectroscopy. During adsorption, the parameters affecting extraction and desorption efficiency were further optimized. Combined gas chromatography and mass spectrometry (GC/MS) revealed that high enrichment factors (275-292), low limits of detection (0.12-0.38 ng·L-1), wide linear ranges (0.5-1000 ng·L-1), and good reproducibility (intra-day 1.40%-4.31% and inter-day 5.14%-9.12%) were obtained under optimal conditions. The method successfully detected PBDEs in different water samples.