First-in-Human Evaluation of a Novel Polymer-Free Drug-Filled Stent

Controlling release from encapsulated drug-loaded devices: insights from modeling the dissolution front propagation

Dissolution of drug from its solid form to a dissolved form is an important consideration in the design and optimization of drug delivery devices, particularly owing to the abundance of emerging compounds that are extremely poorly soluble. When the solid dosage form is encapsulated, for example by the porous walls of an implant, the impact of the encapsulant drug transport properties is a further confounding issue. In such a case, dissolution and diffusion work in tandem to control the release of drug. However, the interplay between these two competing processes in the context of drug delivery is not as well understood as it is for other mass transfer problems, particularly for practical controlled-release considerations such as an encapsulant layer around the drug delivery device. To address this gap, this work presents a mathematical model that describes controlled release from a drug-loaded device surrounded by a passive porous layer. A solution for the drug concentration distribution is derived using the method of eigenfunction expansion. The model is able to track the dissolution front propagation, and predict the drug release curve during the dissolution process. The utility of the model is demonstrated through comparison against experimental data representing drug release from a cylindrical drug-loaded orthopedic fixation pin, where the model is shown to capture the data very well. Analysis presented here reveals how the various geometrical and physicochemical parameters influence drug dissolution and, ultimately, the drug release profile. It is found that the non-dimensional initial concentration plays a key role in determining whether the problem is diffusion-limited or dissolution-limited, whereas the nature of the problem is largely independent of other parameters including diffusion coefficient and encapsulant thickness. We expect the model will prove to be a useful tool for those designing encapsulated drug delivery devices, in terms of optimizing the design of the device to achieve a desired drug release profile.

A novel glycyrrhizin acid-coated stent reduces neointimal formation in a rabbit iliac artery model

Introduction: Most drug-eluting stents (DESs) inhibit intimal hyperplasia but impair re-endothelialization. This study aimed to evaluate in vivo strut coverage and neointimal growth in a new glycyrrhizin acid (GA)-eluting stent. Methods: New Zealand White rabbits (n = 20) with atherosclerotic plaques were randomly divided into three groups based on implanted iliac artery stents: bare-metal stents (BMSs), rapamycin-eluting stents, and GA-eluting stents. After the in vivo intravascular ultrasound (IVUS) assessment at 28 days, the vessels were harvested for scanning electron microscopy (SEM) and histology. After 4 weeks of follow-up, the stent and external elastic lamina (EEL) areas were compared among the groups. Results: The rapamycin- or GA-eluting stents significantly reduced the neointimal area compared with BMSs, though GA-eluting stents had the lowest reduction. There were more uncovered struts for rapamycin-eluting stents than those for GA-eluting stents and bare-metal stents. The endothelial nitric oxide synthase (eNOS) expression in GA-eluting stents was much higher than that in BMSs and rapamycin-eluting stents, even though the endothelial coverage between struts was equivalent between BMSs and GA-eluting stents. Moreover, GA-eluting stents markedly promoted re-endothelialization and improved arterial healing compared to rapamycin-eluting stents in a rabbit atherosclerotic model. Conclusion: In conclusion, the novel GA-coated stent used in this study inhibited intimal hyperplasia and promoted re-endothelialization.

The path to a hemocompatible cardiovascular implant: Advances and challenges of current endothelialization strategies

Cardiovascular (CV) implants are still associated with thrombogenicity due to insufficient hemocompatibility. Endothelialization of their luminal surface is a promising strategy to increase their hemocompatibility. In this review, we provide a collection of research studies and review articles aiming to summarize the recent efforts on surface modifications of CV implants, including stents, grafts, valves, and ventricular assist devises. We focus in particular on the implementation of micrometer or nanoscale surface modifications, physical characteristics of known biomaterials (such as wetness and stiffness), and surface morphological features (such as gratings, fibers, pores, and pits). We also review how biomechanical signals originating from the endothelial cell for surface interaction can be directed by topography engineering approaches toward the survival of the endothelium and its long-term adaptation. Finally, we summarize the regulatory and economic challenges that may prevent clinical implementation of endothelialized CV implants.

A prospective, multicentre first-in-man study of the polymer-free ultrathin-strut BIOrapid stent (BIOVITESSE)

BACKGROUND

Polymer-free drug-coated stents aim to avoid the inflammatory potential of durable polymers, thereby improving the long-term safety profile, and allowing a shorter duration of dual antiplatelet therapy.

AIMS

The BIOVITESSE study was conducted to assess the safety and clinical performance of the BIOrapid polymer-free coronary stent system coated with a novel highly lipophilic sirolimus derivate.

METHODS

BIOVITESSE was a prospective, multicentre, first-in-man study that enrolled subjects with de novo coronary lesions in two cohorts of 33 patients each. The primary endpoint of the first cohort was strut coverage at one month as assessed by optical coherence tomography. The primary endpoint of the second cohort was late lumen loss at nine-month follow-up.

RESULTS

Patients were on average 63 years old (range: 42-87) and 12% had diabetes. The 66 patients had 70 lesions with an average lesion length of 12.5±5.4 mm. Predilatation was performed in 91.4% and post-dilatation in 87.1% lesions; device success was obtained in 97.4%. At one month, 95.2±5.6% (95% CI: 93.2-97.2) of struts were covered and at nine months, in-stent late lumen loss was 0.31±0.30 mm (95% CI: 0.20-0.42) and in-segment late lumen loss was 0.20±0.29 mm. Two target lesion failures occurred (3.1%): one at day 1 (to cover an asymptomatic stent edge dissection), and one at day 288 post-procedure for restenosis. No stent thrombosis was reported during the 12-month study duration.

CONCLUSIONS

The BIOrapid stent system exhibited an excellent safety profile, high strut coverage at one-month, and moderate angiographic efficacy according to the late lumen loss at nine-month angiographic follow-up.

Applying Principles of Regenerative Medicine to Vascular Stent Development

Stents are a widely-used device to treat a variety of cardiovascular diseases. The purpose of this review is to explore the application of regenerative medicine principles into current and future stent designs. This review will cover regeneration-relevant approaches emerging in the current research landscape of stent technology. Regenerative stent technologies include surface engineering of stents with cell secretomes, cell-capture coatings, mimics of endothelial products, surface topography, endothelial growth factors or cell-adhesive peptides, as well as design of bioresorable materials for temporary stent support. These technologies are comparatively analyzed in terms of their regenerative effects, therapeutic effects and challenges faced; their benefits and risks are weighed up for suggestions about future stent developments. This review highlights two unique regenerative features of stent technologies: selective regeneration, which is to selectively grow endothelial cells on a stent but inhibit the proliferation and migration of smooth muscle cells, and stent-assisted regeneration of ischemic tissue injury.

Drug-eluting stents for the treatment of coronary artery disease: A review of recent advances

INTRODUCTION

Percutaneous coronary intervention is a widely used procedure for the treatment of coronary artery disease to relieve narrowing or occlusion and improve blood supply. Although only balloon angioplasty was performed in the early period, coronary stents were developed later and coronary drug-eluting stents were introduced to decrease in-stent restenosis, which is related to the proliferation and migration of vascular smooth muscle cells.

AREAS COVERED

The drug-eluting stents are composed of a metallic or polymeric platform, specific drug, and polymers or coating for drug release. In this article, the recent advances in drug-eluting stent technologies for the treatment of coronary artery disease and adjunctive antiplatelet therapy after drug-eluting stent implantation will be reviewed.

EXPERT OPINION

The need for further advances in drug-eluting stents or fully bioresorbable coronary scaffolds still exists to improve patient survival or clinical outcomes. The use for different actions or of combinations of drugs with several actions can be potential. Technological refinement and progress in manufacturing to improve mechanical integrity are needed, particularly for fully bioresorbable scaffolds. For antiplatelet therapy after stenting, clinical bleeding reduction strategies, such as a shortened duration of dual-antiplatelet therapy, are in progress.

How Does Fluid Flow Influence Drug Release from Drug Filled Implants?

Drug-filled implants (DFIs) have emerged as an innovative approach to control the delivery of drugs. These devices contain the drug within the structure of the implant itself and avoid the need to include additional drug carrier materials such as a polymers, which are often associated with inflammation and delayed healing/tissue regeneration at the implant site. One common feature of in vitro experiments to generate drug release profiles is stirring or agitation of the release medium. However, the influence of the resulting fluid flow on the rate of drug release from DFIs has yet to be quantified. In this paper we consider two DFIs, which although similar in shape and size, employ different strategies to control the release of drug: a porous pin with pores on the order of μm and a pin drilled with orifices of the order of mm. We develop a multiphysics mathematical model of drug release from these DFIs, subject to fluid flow induced through stirring and show that fluid flow greatly influences the drug release profile for the orifice pin, but that the porous pin drug release profile is relatively insensitive to flow. We demonstrate that drug release from the porous pin may adequately be described through a simplified radial 1D dissolution-diffusion model, while a 3D dissolution-advection-diffusion model is required to describe drug release from the orifice pin. A sensitivity analysis reveals that that the balance of reaction-advection-diffusion in terms of key nondimensional numbers governs the overall drug release. Our findings potentially have important implications in terms of devising the most relevant experimental protocol for quantifying drug release from DFIs.

Comparison of Net Clinical Benefit Between Clopidogrel and Ticagrelor Following Percutaneous Coronary Intervention in Patients in China With Acute Coronary Syndrome

INTRODUCTION

The objective of the present study was to evaluate the difference in net clinical benefit of clopidogrel plus aspirin compared with ticagrelor plus aspirin after 12 months in patients in mainland China with acute coronary syndrome (ACS) undergoing percutaneous coronary intervention (PCI) with newer-generation drug-eluting stents (DESs).

METHODS

In this multicenter, retrospective, real-world study, the data were sourced from three databases: BRIC-ACS(I) study, COSTIC study, and 301 Hospital PCI patient database from January 2014 to October 2017. The primary endpoint of the study was net adverse clinical and cerebral events (NACCE) comprised of all-cause death, non-fatal myocardial infarction (MI), non-fatal stroke or Bleeding Academic Research Consortium (BARC) type ≥ 2 (excluding BARC type = 4) bleeding, whereas the secondary end point was evaluation of major adverse cardiovascular events (MACE) and BARC type ≥ 2 bleeding events.

RESULTS

A total of 7862 ACS patients were included in the final analysis, of whom propensity score matching (PSM) analysis yielded 2165 patients in each cohort. After PSM analysis, cumulative incidence of NACCE was significantly lower with clopidogrel and aspirin than with ticagrelor and aspirin [117 (5.4%) vs. 180 (8.3%), P < 0.001] at 12 months. Effect estimates showed reduced risk of NACCE occurrence in patients treated with clopidogrel and aspirin [adjusted hazard ratio (aHR): 0.61, 95% CI 0.48-0.77, P < 0.001]. Incidence of bleeding was significantly lower in the clopidogrel cohort than in the ticagrelor cohort (aHR: 0.48, 95% CI 0.35-0.66, P < 0.001). Clopidogrel and aspirin therapy was comparable to ticagrelor and aspirin in reducing the incidence of MACE after PSM analysis.

CONCLUSION

In Chinese ACS patients who underwent PCI with second-generation DESs, outpatient use of clopidogrel dual antiplatelet therapy (DAPT) was associated with reduction in NACCE and bleeding.

Healing and early stent coverage after ultrathin strut biodegradable polymer-coated sirolimus-eluting stent implantation: SiBi optical coherence tomography study

AIMS

The aim of SiBi study was to evaluate the early vascular healing and neointimal coverage after implantation of ultrathin (60 μm) biodegradable polymer-coated Tetriflex (Sahajanand Medical Technologies Pvt. Ltd., Surat, India) sirolimus-eluting stent (SES) using optical coherence tomography (OCT) at 4 to 6 weeks after implantation.

METHODS

SiBi was a single-center, observational, investigator-initiated study. From January 15, 2018 to April 15, 2018, total 29 consecutive patients who had consented and underwent OCT examination at 4-6 weeks after Tetriflex SES implantation were enrolled. All OCT images were analyzed at an independent core laboratory by analysts who were blinded to patient and procedural information.

RESULTS

Of 29 patients, four patients were excluded, as those OCT images were technically inadequate for analysis. Therefore, 25 patients were included in final OCT analysis. Average OCT analysis was performed after 35.3 ± 5 days of Tetriflex implantation. Total 14,024 stent struts in 1,520 cross sections were analyzed. Strut tissue coverage was observed in 91.26 ± 5.53% of struts and malapposed struts were seen in 0.89 ± 1.67%. The mean neointimal hyperplasia (NIH) thickness on the covered struts was 50 ± 30 μm.

CONCLUSION

A large percentage of struts were found to be covered with thin layer of NIH evenly distributed along the stent length at around 1 month from stent implantation. The results of this pilot study serve as ethical and scientific backbone to conduct an adequately powered clinical trial to evaluate outcomes of short dual-antiplatelet therapy in context of ultrathin strut stent.

Exosome-eluting stents for vascular healing after ischaemic injury

Drug-eluting stents implanted after ischaemic injury reduce the proliferation of endothelial cells and vascular smooth muscle cells and thus neointimal hyperplasia. However, the eluted drug also slows down the re-endothelialization process, delays arterial healing and can increase the risk of late restenosis. Here we show that stents releasing exosomes derived from mesenchymal stem cells in the presence of reactive oxygen species enhance vascular healing in rats with renal ischaemia-reperfusion injury, promoting endothelial cell tube formation and proliferation, and impairing the migration of smooth muscle cells. Compared with drug-eluting stents and bare-metal stents, the exosome-coated stents accelerated re-endothelialization and decreased in-stent restenosis 28 days after implantation. We also show that exosome-eluting stents implanted in the abdominal aorta of rats with unilateral hindlimb ischaemia regulated macrophage polarization, reduced local vascular and systemic inflammation, and promoted muscle tissue repair.

Cardiovascular Stents: A Review of Past, Current, and Emerging Devices

One of the leading causes of morbidity and mortality worldwide is coronary artery disease, a condition characterized by the narrowing of the artery due to plaque deposits. The standard of care for treating this disease is the introduction of a stent at the lesion site. This life-saving tubular device ensures vessel support, keeping the blood-flow path open so that the cardiac muscle receives its vital nutrients and oxygen supply. Several generations of stents have been iteratively developed towards improving patient outcomes and diminishing adverse side effects following the implanting procedure. Moving from bare-metal stents to drug-eluting stents, and recently reaching bioresorbable stents, this research field is under continuous development. To keep up with how stent technology has advanced in the past few decades, this paper reviews the evolution of these devices, focusing on how they can be further optimized towards creating an ideal vascular scaffold.

The role of intracoronary imaging in translational research

Atherosclerotic cardiovascular disease is a key public health concern worldwide and leading cause of morbidity, mortality and health economic costs. Understanding atherosclerotic plaque microstructure in relation to molecular mechanisms that underpin its initiation and progression is needed to provide the best chance of combating this disease. Evolving vessel wall-based, endovascular coronary imaging modalities, including intravascular ultrasound (IVUS), optical coherence tomography (OCT) and near-infrared spectroscopy (NIRS), used in isolation or as hybrid modalities, have been advanced to allow comprehensive visualization of the pathological substrate of coronary atherosclerosis and accurately measure temporal changes in both the vessel wall and plaque characteristics. This has helped further our appreciation of the natural history of coronary artery disease (CAD) and the risk for major adverse cardiovascular events (MACE), evaluate the responsiveness to conventional and experimental therapeutic interventions, and assist in guiding percutaneous coronary intervention (PCI). Here we review the use of different imaging modalities for these purposes and the lessons they have provided thus far.

Modern Stents: Where Are We Going?

Coronary artery stenting is the treatment of choice for patients requiring coronary angioplasty. We describe the major advancements with this technology. There have been significant developments in the design of stents and adjunctive medical therapies. Newer-generation drug-eluting stents (DES) have almost negligible restenosis rates and, when combined with proper anti-platelet treatment and optimal deployment, a low risk of stent thrombosis. The introduction of newer-generation DES with thinner stent struts, novel durable or biodegradable polymer coatings, and new antiproliferative agents has further improved the safety profile of early-generation DES. In parallel the effectiveness has been kept, with a significant reduction in the risk of target lesion revascularization compared with the early-generation DES. However, to date, the development of completely bioresorbable vascular scaffolds has failed to achieve further clinical benefits and has been associated with increased thrombosis. Newer-generation DES-including both durable polymer as well as biodegradable polymer-have become the standard of care in all patient and lesion subsets, with excellent long-term results.

A novel biofunctionalizing peptide for metallic alloy

OBJECTIVES

Improving biocompatibility of metallic alloy biomaterials has been of great interest to prevent implant associated-diseases, such as stent thrombosis. Herein a simple and efficient procedure was designed to biofunctionalize a biomaterial surface by isolating a SUS316L stainless steel binding peptide.

RESULTS

After three rounds of phage panning procedure, 12 mer peptide (SBP-A; VQHNTKYSVVIR) was identified as SUS316L-binding peptide. The SBP-A peptide formed a stable bond to a SUS316L modified surface and was not toxic to HUVECs. The SBP-A was then used for anti-ICAM antibody modification on SUS316L to construct a vascular endothelial cell-selective surface. The constructed surface dominantly immobilized vascular endothelial cells to smooth muscle cells, demonstrating that the SBP-A enabled simple immobilization of biomolecules without disturbing their active biological function.

CONCLUSIONS

The SUS316L surface was successfully biofunctionalized using the novel isolated peptide SBP-A, showing its potential as an ideal interface molecule for stent modification. This is the first report of material binding peptide-based optimal surface functionalization to promote endothelialisation. This simple and efficient biofunctionalization procedure is expected to contribute to the development of biocompatible materials.

Short-term stent coverage of second-generation zotarolimus-eluting durable polymer stents: Onyx one-month optical coherence tomography study

Introduction

To date the early strut coverage with the second-generation durable-polymer ONYX zotarolimus-eluting stent (O-ZES) is unknown.

Aim

Optical coherence tomography (OCT) assessed the strut coverage of O-ZES at thirty-day follow-up.

Material and methods

OCT was performed after implantation and at 1-month follow-up in 15 patients treated with O-ZES.

Results

Mean patient age was 67 ±7 years (73% males). The clinical presentation consisted of acute coronary syndromes (n = 13) and stable coronary disease (n = 2). Four (26%) patients had diabetes. OCT analysis was performed at baseline and 1-month follow-up in all stents. 378 cross-sections with 3582 struts were assessed at baseline and 3661 at follow-up. At follow-up, 88% struts were covered by tissue with a median thickness 37.91 μm (IQR: 22.32–64.15). Median in-stent area obstruction by neointima was 2.64% (IQR: 1.70–4.84). From the total stent covered area, 92.3% showed complete strut coverage. Homogeneous tissue was observed in 74% of cases. There were no differences in minimal lumen area (5.07 ±1.08 mm² vs. 4.81 ±0.94 mm², p = 0.125) or minimal stent area (4.95 ±1.22 mm² vs. 4.92 ±0.99 mm²) at baseline and at follow-up. There were no differences in the rate of strut malapposition (4.3% vs. 5.7%, p = 0.417). For all stents, malapposition volume was 47.9 mm³ at baseline and 51.7 mm³ at follow-up, giving the late acquired stent malapposition volume of 3.8 mm³.

Conclusions

The second-generation durable polymer O-ZES showed favorable vessel healing at 30-day OCT follow-up.

Current concepts regarding drug dosing for peripheral stents

Drug-eluting stent (DES) are the mainstay therapy for the treatment of coronary artery disease. Stent design and drug-elution strategies have evolved over the years leading to the last generation DES which shows optimal safety and efficacy outcome. Peripheral arteries have different mechanical and biological features and the lessons learned from the coronary field have been difficult to introduce into the development of peripheral vascular technologies. First, due to its complex biomechanical behavior the use of metallic stents is limited in some vascular segments (i.e., distal superficial fermoral artery [SFA]). Also, peripheral vascular atherosclerosis is different containing higher levels of plaque burden and calcium. Finally, peripheral arterial disease tends to be more aggressive including longer lesions and higher incidence of total chronic occlusion. In general terms, restenosis in the peripheral vascular territory is more aggressive and occurs at a later time (~12 months) requiring a different pharmacokinetic profile compared to coronary technologies. Several strategies have been evaluated in the peripheral arteries raging from the bare metal stent to the drug coated balloon and drug eluting stent with outcome varying depending on the different field of application (i.e. SFA and below-the-knee). Results coming from the clinical trial are encouraging but further studies and direct comparison among the different technologies are demanded to determine the best therapy for peripheral vascular disease.

Biodegradable-Polymer Versus Polymer-Free Drug-Eluting Stents for the Treatment of Coronary Artery Disease

BACKGROUND/PURPOSE

Biodegradable-polymer (BP) and polymer-free (PF) drug eluting stents (DES) were developed to reduce the risk of delayed arterial healing observed with durable-polymer (DP) platforms. Although trials demonstrate BP-DES and PF-DES are non-inferior to DP-DES, there is limited data directly comparing these technologies. We performed a meta-analysis to assess the efficacy and safety of BP-DES versus PF-DES for the treatment of coronary artery disease.

METHODS/MATERIALS

Electronic searches were performed identifying randomized trials comparing BP-DES with PF-DES. Co-primary efficacy endpoints were target vessel revascularization (TVR), target lesion revascularization (TLR) and angiographic in-stent late lumen loss (LLL). Co-secondary safety endpoints were all-cause death, myocardial infarction (MI) and stent thrombosis (ST).

RESULTS

Of 208 studies, 5 met inclusion criteria including 1975 patients. At mean follow-up (14 ± 5 months), BP-DES were associated with significantly reduced rates of TVR (OR 0.58, 95%CI 0.37-0.92, p = 0.02), TLR (4.7% vs 9.5%) (OR 0.48, 95%CI 0.31-0.75, p = 0.001) and in-stent LLL (pooled mean difference -0.20 mm, 95%CI -0.24 to -0.16, p < 0.001). There was no difference in safety, including all-cause death (OR 1.24, 95%CI 0.68-2.28, p = 0.48), MI (OR 0.92, 95%CI 0.54-1.56, p = 0.75) or ST (OR 1.58, 95%CI 0.67-3.73, p = 0.30).

CONCLUSIONS

These data suggests that BP-DES are more efficacious when compared with PF-DES for the treatment of CAD.

Non-polymer drug-eluting coronary stents

Cardiovascular complications are leading causes of most fatalities. Coronary artery disease and surgical failures contribute to the death of the majority of patients. Advanced research in the field of medical devices like stents has efficiently resolved these problems. Clinically, drug-eluting stents have proven their efficacy and safety compared to bare metal stents, which have problems of in-stent restenosis. However, drug-loaded stents coated with polymers have shown adverse effects related to the stability and deterioration of the polymer coating over time. This results in late stent thrombosis and immunogenicity. These reasons laid the foundation for the development of non-polymeric drug-eluting stents. This review focuses on non-polymer drug-eluting stents loaded with different drugs like anti-inflammatory agents, anti-thrombotic, anti-platelet agents, immune suppressants and others. Surface modification techniques on stents like crystalline coating; microporous, macroporous, and nanoporous coatings; and chemically modified self-assembled monolayers are described in detail. There is also an update on clinically approved products and those under development.

The Newest Generation of Drug-eluting Stents and Beyond

There has been a great evolution in the development of coronary stents in order to avoid both restenosis and thrombosis. Improvements have led to improvements in the design and conformation of metallic or resorbable structures, with an adequate balance between trackability and radial force, the development of antiproliferative drugs and the polymers to control release and allow adequate endothelialisation and an optimal duration of the antiplatelet regimen. Some suggestions are provided about the ideal characteristics of future coronary stents.

Coronary balloon angioplasty, stents, and scaffolds

Since the first coronary angioplasty on Sept 16, 1977, the field of percutaneous coronary intervention has evolved rapidly. Now marking its 40th anniversary, percutaneous coronary intervention has become one of the most common medical procedures worldwide. Much of this progress has been due to the iteration and improvement of angioplasty technologies. Balloon angioplasty was limited by unpredictable procedural outcomes due to vessel dissection and recoil, and a high rate of restenosis. The introduction of stents resulted in more stable early results and lower rates of restenosis, although early stent thrombosis and neointimal hyperplasia causing vessel renarrowing were key limitations. Drug-eluting stents delivering antiproliferative agents significantly lowered the rates of restenosis, permitting widespread use of percutaneous coronary intervention in more advanced and complex disease. Although fully bioresorbable scaffolds have the potential to further improve long-term outcomes, they have not yet achieved results equivalent to those of conventional metallic drug-eluting stents in the early years after implantation. Progress in catheter technology did not occur in isolation, and the success of percutaneous coronary intervention is also due to important advances in intracoronary imaging, and adjunct pharmacotherapy-each of which is reviewed in other papers in this Series.