Quantitative analysis of protein adsorption on a planar surface by Fourier transform infrared spectroscopy: lysozyme adsorbed on hydrophobic silicon-containing polymer

Terminal Deuterium Atoms Protect Silicon from Oxidation

In recent years, the hybrid silicon-molecular electronics technology has been gaining significant attention for applications in sensors, photovoltaics, power generation, and molecular electronics devices. However, Si-H surfaces, which are the platforms on which these devices are formed, are prone to oxidation, compromising the mechanical and electronic stability of the devices. Here, we show that when hydrogen is replaced by deuterium, the Si-D surface becomes significantly more resistant to oxidation when either positive or negative voltages are applied to the Si surface. Si-D surfaces are more resistant to oxidation, and their current-voltage characteristics are more stable than those measured on Si-H surfaces. At positive voltages, the Si-D stability appears to be related to the flat band potential of Si-D being more positive compared to Si-H surfaces, making Si-D surfaces less attractive to oxidizing OH- ions. The limited oxidation of Si-D surfaces at negative potentials is interpreted by the frequencies of the Si-D bending modes being coupled to that of the bulk Si surface phonon modes, which would make the duration of the Si-D excited vibrational state significantly less than that of Si-H. The strong surface isotope effect has implications in the design of silicon-based sensing, molecular electronics, and power-generation devices and the interpretation of charge transfer across them.

Lysozyme-Immobilized Polyethersulfone Membranes with Satisfactory Hemocompatibility and High Enzyme Activity for Endotoxin Removal

Endotoxin adsorption has received extensive attention in the field of blood purification. However, developing highly efficient endotoxin adsorbents with excellent hemocompatibility remains challenging. In this study, we propose a new approach for developing the functional polyethersulfone (PES) membrane to remove endotoxins. First, the PES polymer is grafted with polyethylene glycol methyl acrylate (PEG-MA) in a homogeneous phase system via γ irradiation, and PES-g-PEG can be directly used to prepare the membrane by the phase inversion method. Then, polydopamine (PDA) is coated as an adhesive layer onto a PES-g-PEG membrane in an alkaline aqueous solution, and lysozyme (Lyz) is covalently immobilized with PDA through the Schiff base reaction. Lysozyme acts as an affinity adsorption ligand of endotoxin through charge and hydrophobic action. Our study reveals that the PEG branched chain and the PDA coating on the PES membrane can maintain the secondary structure of lysozyme, and thus, the immobilized Lyz can maintain high activity. The adsorption capacity of endotoxins for the PES-g-PEG/PDA/Lyz membrane is 1.28 EU/mg, with an equilibrium adsorption time of 6 h. Therefore, the PES-g-PEG/PDA/Lyz membrane shows great potential application in the treatment of endotoxemia.

Solid-Supported Assembly Composed of n-Octyl-β-D-glucopyranoside and 1,2-Dioleoyl-sn-glycero-3-phosphocholine in Equilibrium with Its Ambient Aqueous Solution System Including Dispersed Assembly

In the last few decades, the preparation of solid-supported lipid bilayers by immersing a solid substrate in an aqueous solution where the lipid is dissolved with the aid of a surfactant, followed by dilution of the solution, has been reported. In this study, we attempted to interpret the evolution of supported surfactant/lipid assemblies towards the supported lipid bilayer in terms of a phase equilibrium between the supported assembly phase and its ambient solution system consisting of the dispersed surfactant/lipid assembly phase and the bulk solution phase comprising monomeric surfactant and lipid. We characterized the supported assembly formed on hydrophilized Ge or mica substrates in equilibrium with aqueous solutions containing various concentrations of the nonionic surfactant, n-octyl-β-D-glucopyranoside (OG) and the amphoteric phospholipid, 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), using interaction-force-profile measurements by atomic force microscopy (AFM), and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). We also investigated the ambient solution system using equilibrium dialysis to obtain the partition equilibrium profile of OG between the bulk solution and dispersed assembly phases in the micellar or vesicular states. These studies indicate that the properties of the supported assembly depend on the composition of the dispersed assembly and concentration of monomerically dissolved OG. Further, a type of micellar-bilayer state transition occurs in the supported assembly, roughly synchronized with that in the dispersed assembly.

Mid-infrared spectroscopy for protein analysis: potential and challenges

Mid-infrared (MIR) spectroscopy investigates the interaction of MIR photons with both organic and inorganic molecules via the excitation of vibrational and rotational modes, providing inherent molecular selectivity. In general, infrared (IR) spectroscopy is particularly sensitive to protein structure and structural changes via vibrational resonances originating from the polypeptide backbone or side chains; hence information on the secondary structure of proteins can be obtained in a label-free fashion. In this review, the challenges for IR spectroscopy for protein analysis are discussed as are the potential and limitations of different IR spectroscopic techniques enabling protein analysis. In particular, the amide I spectral range has been widely used to study protein secondary structure, conformational changes, protein aggregation, protein adsorption, and the formation of amyloid fibrils. In addition to representative examples of the potential of IR spectroscopy in various fields related to protein analysis, the potential of protein analysis taking advantage of miniaturized MIR systems, including waveguide-enhanced MIR sensors, is detailed.

Protein PEGylation attenuates adsorption and aggregation on a negatively charged and moderately hydrophobic polymer surface

Covalent grafting of poly(ethylene glycol) chains to proteins ("PEGylation") is emerging as an effective technique to increase the in vivo circulation time and efficacy of protein drugs. PEGylated protein adsorption at a variety of solid/aqueous interfaces is a critical aspect of their manufacture, storage, and delivery. A special category of block copolymer, PEGylated proteins have one or more water-soluble linear polymer (PEG) blocks and a single globular protein block that each exert distinct intermolecular and surface interaction forces. We report the impact of PEGylation on protein adsorption at the interface between aqueous solutions and solid films of poly(lactide-co-glycolide) (PLG), a moderately hydrophobic and negatively charged polymer. Using the model protein lysozyme with controlled degrees of PEGylation, we employ total internal reflection fluorescence techniques to measure adsorption isotherms, adsorption reversibility, and the extent of surface-induced aggregation. Lysozyme PEGylation reduces the extent of protein adsorption and surface-induced aggregation and increases the reversibility of adsorption compared to the unconjugated protein. Results are interpreted in terms of steric forces among grafted PEG chains and their effects on protein-protein interactions and protein orientation on the surface.

Mechanism of hen egg white lysozyme adsorption on a charged solid surface

The mechanism of hen egg white lysozyme (HEWL) adsorption on a negatively charged, hydrophilic surface has been studied using atomistic molecular dynamics (MD) simulation. Sixteen 90 ns trajectories provide adequate data to allow a detailed description of the adsorption process to be formulated. Two distinct adsorption sites have been identified. The main one is located on the N,C-terminal protein face and comprises Arg128 (the crucial one), supplemented by Arg125, Arg5, and Lys1; the minor one is used accidentally and contains only Arg68. Adsorption of this protein is driven by electrostatics, where the orientation of the protein dipole moment defines the direction of protein movement. The diffusion range on the surface depends on protein side-chain penetration through the surface water layers. This is facilitated by the long-range electric field of the charged surface, which can align polar side chains to be perpendicular to the surface. A simulation of adsorption onto a neutral ionic surface shows no such surface water layer penetration. Therefore, protein flexibility is seen to be an important factor, and to adsorb the HEWL has to adjust its structure. Nevertheless, at a flat surface only a slight loss of α-helical content is required. The adsorbed HEWL molecule is oriented between side-on and end-on ways, where the angle between the protein long axis (which mostly approximates the dipole moment) and the surface varies between 45° and 90°. Simulations with targeted mutations confirm the picture that emerges from these studies. The active site is located on the opposite face to the main adsorption site; hence, the activity of the immobilized HEWL should not be affected by the surface interactions. Our results provide a detailed insight into the adsorption mechanism and protein mobility at the surface. This knowledge will aid the proper interpretation of experimental results and the design of new experiments and functional systems.

AFM study of adsorption of protein A on a poly(dimethylsiloxane) surface

In this paper, the morphology and kinetics of adsorption of protein A on a PDMS surface is studied by AFM. The results of effects of pH, protein concentration and contact time of the adsorption reveal that the morphology of adsorbed protein A is significantly affected by pH and adsorbed surface concentration, in which the pH away from the isoelectric point (IEP) of protein A could produce electrical repulsion to change the protein conformation, while the high adsorbed surface protein volume results in molecular networks. Protein A can form an adsorbed protein film on PDMS with a maximum volume of 2.45 x 10(-3) microm(3). This work enhances our fundamental understanding of protein A adsorption on PDMS, a frequently used substrate component in miniaturized immunoassay devices.

A Novel ATR-FTIR Approach for Characterisation and Identification of Ex Situ Immobilised Species

We demonstrate a novel method to analyse ex situ prepared protein chips by attenuated total reflection Fourier IR spectroscopy (ATR-FTIR), which circumvents tedious functionalisation steps of internal reflection elements (IREs), and simultaneously allows for complementary measurements by other analytical techniques. This concept is proven by utilising immobilised metal affinity capture (IMAC) chips containing about 10 mum thick films of copolymers coated with nitrilotriacetic acid (NTA) groups, which originally was manufactured for surface enhanced laser desorption ionisation (SELDI) spectrometry. Three immobilisation steps were analysed by ATR-FTIR spectroscopy: 1) NTA complexation with nickel(II) ions 2) binding of two histidine (His)-tagged synthetic peptides of 25 (25-His6) and 48 (48-His6) amino acids to the NTA-groups and 3) attachment of a ligand, mesyl amide, to the surface-bound 48-His6. Despite interference from H(2)O, both amide I and II were well resolved. Utilising peptide adsorption in the thick copolymer matrix yields a high saturation peptide concentration of approximately 100 mg mL(-1) and a dissociation constant of 116+/-11 muM, as determined by a detailed analysis of the Langmuir adsorption isotherm. The mesyl amide ligand was directly seen in the raw ATR-FTIR spectrum with specific peaks in the fingerprint region at 1172 and 1350 cm(-1). Several aspects of the fine structure of the amide I band of the peptide were analysed: influences from secondary structure, amino side chains and competing contamination product. We believe that this approach has great potential as a stand-alone or complementary analytical tool for determination of the chemical composition of functionalised surfaces. We emphasise further that with this approach no chemical treatment of IREs is needed; the chips can be regenerated and reused, and applied in other experimental set-ups.

Aggregation of lysozyme and of poly(ethylene glycol)-modified lysozyme after adsorption to silica

Surface-induced aggregation is a common instability during protein storage, delivery and purification. This aggregation can lead to the formation of fibrils rich in intermolecular beta-sheet structure. Techniques to probe surface-clustering are limited. Here we use protein intrinsic fluorescence and thioflavin T probe fluorescence in a total internal reflection fluorescence (TIRF) sampling geometry to simultaneously monitor the kinetics of adsorption and aggregation for chicken egg lysozyme on a silica surface. We observe a slow surface-induced aggregation process that continues well after the lysozyme adsorption kinetics have plateaued. The rate of surface-induced aggregation is independent of the lysozyme concentration in solution. Consistent with the clustering observed via thioflavin T fluorescence, infrared amide I band spectra also show a 1.5-fold increase in intermolecular beta-sheet content upon lysozyme adsorption. Tryptophan emission spectra show no evidence for any tertiary structural change upon adsorption. Furthermore, we observe that the covalent modification of lysozyme with a single poly(ethylene glycol) (PEG) grafted chain does not inhibit aggregation on the surface, but a second PEG graft significantly inhibits the intermolecular beta-sheet formation.

Modes of conformational changes of proteins adsorbed on a planar hydrophobic polymer surface reflecting their adsorption behaviors

Infrared spectra of hen egg white lysozyme and bovine serum albumin (BSA) adsorbed on a solid poly tris(trimethylsiloxy)silylstyrene (pTSS) surface in D2O solution were measured using attenuated total reflection (ATR) Fourier transform infrared spectroscopy. From the area and shape of the amide I' band of each spectrum, the adsorption amount and the secondary structure were determined simultaneously, as a function of adsorption time. We could show that the average conformation for all the adsorbed lysozyme molecules was solely determined by the adsorption time, and independent of the bulk concentration, while the adsorption amount increased with the bulk concentration as well as the adsorption time. These results suggest that lysozyme molecules form discrete assemblies on the surface, and that the surface assemblies grow over several hours to have a definite architecture independent of the adsorption amount. As for BSA, the extent of the conformational change was solely determined by the adsorption amount, regardless of the bulk concentration and the adsorption time. These differences in the adsorption properties of lysozyme and BSA may reflect differences in their conformational stabilities.