Immobilization of liposomes onto quartz crystal microbalance to detect interaction between liposomes and proteins

Classification of binding property of amyloid β to lipid membranes: Membranomic research using quartz crystal microbalance combined with the immobilization of lipid planar membranes

A biomembrane-related fibrillogenesis of Amyloid β from Alzheimer' disease (Aβ) is closely related to its accumulation behavior. A binding property of Aβ peptides from Alzheimer' disease to lipid membranes was then classified by a quartz crystal microbalance (QCM) method combined with an immobilization technique using thiol self-assembled membrane. The accumulated amounts of Aβ, Δfmax, was determined from the measurement of the maximal frequency reduction using QCM. The plots of Δfmax to Aβ concentration gave the slope and saturated value of Δfmax, (Δfmax)sat that are the parameters for binding property of Aβ to lipid membranes. Therefore, the Aβ-binding property on lipid membranes was classified by the slope and (Δfmax)sat. The plural lipid system was described as X + Y where X = L1, L1/L2, and L1/L2/L3. The slope and (Δfmax)sat values plotted as a function of mixing ratio of Y to X was classified on a basis of the lever principle (LP). The LP violation observed in both parameters resulted from the formation of the crevice or pothole, as Aβ-specific binding site, generated at the boundary between ld and lo phases. The LP violation observed only in the slope resulted from glycolipid-rich domain acting as Aβ-specific binding site. Furthermore, lipid planar membranes indicating strong LP violation favored strong fibrillogenesis. Especially, lipid planar membranes indicating the LP violation only in the slope induced lateral aggregated and spherulitic fibrillar aggregates. Thus, the classification of Aβ binding property on lipid membranes appeared to be related to the fibrillogenesis with a certain morphology.

Recent advances in liposome development for studying protein-lipid interactions

Protein-lipid interactions are crucial for various cellular biological processes like intracellular signaling, membrane transport, and cytoskeletal dynamics. Therefore, studying these interactions is essential to understand and unravel their specific functions. Nevertheless, the interacting proteins of many lipids are poorly understood and still require systematic study. Liposomes are the most well-known and familiar biomimetic systems used to study protein-lipid interactions. Although liposomes have been widely used for studying protein-lipid interactions in classical methods such as the co-flotation assay (CFA), co-sedimentation assay (CSA), and flow cytometric assay (FCA), an overview of their current applications and developments in high-throughput methods is not yet available. Here, we summarize the liposome development in low and high-throughput methods to study protein-lipid interactions. Besides, a constructive comment for each platform is presented to stimulate the advancement of these technologies in the future.

Glycolipids improve the stability of liposomes: The perspective of bilayer membrane structure

The storage and thermal stability of liposomes, which are amphiphilic carriers, cause very large challenges. However, glycolipid modification may be a potential method to improve the stability of liposomes. In this study, the mechanism by which tilapia head glycolipids improve the stability of liposomes was studied. The head groups of glycolipids and liposomes have a strong interaction (K_a = 633.650 M^-1), mainly due to hydrogen bonds, which promote the formation of microstructure domains between glycolipids and liposomes. In addition, glycolipids caused the bilayer structure of liposomes to rearrange, resulting in an increase in the phase transition temperature, tight arrangement of membrane molecules, and increase in membrane thickness (from 2.4 nm to 3.5 nm). Novelty, the formation of microstructure domains helped prevent the liposomes membrane structure from being disrupted during storage and heat. Therefore, glycolipid modification improved the stability of liposomes. This study can provide new insights into the development of high-stability liposomes.

Quartz crystal microbalance sensor for the detection of collagen model peptides based on the formation of triple helical structure

Collagen is a major structural protein, and abnormalities in collagen structure can lead to several connective tissue diseases such as osteoporosis. We report the preparation of a collagen sensor using a synthetic peptide as proof of concept for detecting the collagen like peptides. The synthetic peptide 9-fluorenylmethyloxycarbonyl (Fmoc)-(prolyl-prolyl-glycine)₇-OH was coupled to thiazolidine, which gets adsorbed on metal surfaces. Fmoc-(prolyl-prolyl-glycine)₇-thiazolidine was immobilized on the surface of a quartz crystal microbalance (QCM) electrode used as a sensor probe. The collagen model peptide (prolyl-prolyl-glycine)₁₀ could be detected, and the model peptide was directly adsorbed onto the surface of the electrode and was not removed by washing with hot water. Additionally, it was proved that the sensitivity of the probe could be enhanced to nanogram order by immobilizing the blocking reagent, Fmoc-prolyl-prolyl-glycine, within the gap of sensor probes on the electrode. The detectable mass of the model peptide decreased as the probe gap became narrower because of self-association of the probes. Moreover, the sensitivity of sensor probes also decreases as the gap between the probes becomes wider. Therefore, the optimum distance between the immobilized probes was determined from the simulation based on the experimental values. The association rate of the model peptide with sensor probes could be quantitatively determined when the distance between the probes was optimum, and this result suggested that most sensor probes could form a triple helical structure with the model peptide.

Biochemistry strategies for label-free optical sensor biofunctionalization: advances towards real applicability

Label-free biosensors, and especially those based on optical transducers like plasmonic or silicon photonic systems, have positioned themselves as potential alternatives for rapid and highly sensitive clinical diagnostics, on-site environmental monitoring, and for quality control in foods or other industrial applications, among others. However, most of the biosensor technology has not yet been transferred and implemented in commercial products. Among the several causes behind that, a major challenge is the lack of standardized protocols for sensor biofunctionalization. In this review, we summarize the most common methodologies for sensor surface chemical modification and bioreceptor immobilization, discussing their advantages and limitations in terms of analytical sensitivity and selectivity, reproducibility, and versatility. Special focus is placed on the suggestions of innovative strategies towards antifouling and biomimetic functional coatings to boost the applicability and reliability of optical biosensors in clinics and biomedicine. Finally, a brief overview of research directions in the area of device integration, automation, and multiplexing will give a glimpse of the future perspectives for label-free optical biosensors.

The importance of nanoparticle physicochemical characterization for immunology research: What we learned and what we still need to understand

Physicochemical characterization of nanoparticles intended for immunology research is important as it helps explain the observed immunological effects. More importantly, it relates the physicochemical properties with the immunological properties to draw meaningful conclusions. There are many physicochemical parameters, with each having numerous analytical techniques and instrumentation to measure them. Thus, where to begin can be challenging even for the experienced scientist. This paper aims to provide guidance to the immunology scientist on how best to characterize their nanoparticles. A step-by-step guide for the physicochemical characterization of liposomal formulations, based on the FDA's guidance for industry for Liposome Drug Products, is provided. Eight critical quality attributes have been identified and for each, the methodology and the physicochemical questions one should consider are discussed. This chapter also addresses common physicochemical characterization mistakes and concludes with a perspective on the type of measurements needed to address current physicochemical characterization gaps and challenges.

Acoustic Immunosensing of Exosomes Using a Quartz Crystal Microbalance with Dissipation Monitoring

Exosomes are endocytic lipid-membrane bound bodies with the potential to be used as biomarkers in cancer and neurodegenerative disease. The limitations and scarcity of current exosome characterization approaches have led to a growing demand for translational techniques, capable of determining their molecular composition and physical properties in physiological fluids. Here, we investigate label-free immunosensing, using a quartz crystal microbalance with dissipation monitoring (QCM-D), to detect exosomes by exploiting their surface protein profile. Exosomes expressing the transmembrane protein CD63 were isolated by size-exclusion chromatography from cell culture media. QCM-D sensors functionalized with anti-CD63 antibodies formed a direct immunoassay toward CD63-positive exosomes in 75% v/v serum, exhibiting a limit-of-detection of 2.9 × 108 and 1.4 × 108 exosome sized particles (ESPs)/mL for frequency and dissipation response, respectively, i.e., clinically relevant concentrations. Our proof-of-concept findings support the adoption of dual-mode acoustic analysis of exosomes, leveraging both frequency and dissipation monitoring for use in bioanalytical characterization.

Effect of saturation in phospholipid/fatty acid monolayers on interaction with amyloid β peptide

The effect of the saturation of fatty acid (FA) in 1,2-dimyristoyl-sn-glycero-3-phosphocoline (DMPC)/FA membrane on the interaction between lipid membrane and amyloid β monomer was investigated by using the Langmuir monolayer technique. The surface pressure (Π)-mean molecular area (A) isotherms and fluorescent measurements reveal that DMPC and octadecanoic acid (stearic acid, SA) molecules were somewhat miscible in the mixed membrane, which was maintained to homogeneous gel phase by enhance of the intermolecular hydrophobic interactions because of the all trans acyl chains. On the other hand, DMPC and 9Z,12Z-octadecadienoic acid (linoleic acid, LA) molecules were considered to be well miscible in the mixed membrane, where the membrane partially transferred from gel phase to liquid-crystalline phase. The Π-A isotherms of the monolayers on amyloid β-peptide (Aβ) solution indicated that Aβ monomers tend to be inserted into the saturated acyl chain region of monolayers at low surface pressure and that the Aβ monomers were then extruded from the monolayer at higher surface pressure. It was observed that behaviors of Aβ monomers at higher surface pressure depended on membrane microstructures. In the DMPC/SA monolayers, Aβ aggregated and then was extruded from monolayers at about 20 mN m^-1 of surface pressure irrespective of the SA proportion. On the other hand, in the DMPC/LA monolayers, Aβ, which favors to interact with DMPC, is dispersed in the monolayer even at high surface pressure because DMPC and LA molecules were well miscible in the monolayer.

Chitosan-coated microvesicles: Effect of polysaccharide-phospholipid affinity on decafluorobutane dissolution

The stability of perfluorinated microvesicles is mainly determined by the presence of interfacial materials and their ability to hinder the gas component diffusibility into the bloodstream. The goal of this study is to increase the persistence of the gaseous-core by introducing chitosan-coated 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) microvesicles, reducing gas diffusion from microvesicles, and increasing for a long time ultrasonic signals. Our hypothesis was based on the irreversible adhesion of chitosan towards DSPC head groups observed in thin-films models. This affinity enhanced the stabilization of gaseous-core microvesicles, in which the polysaccharide effectively reduced the phospholipid phase transition enthalpy from 383±5.5Jmg(-1) for plain to 150±9.7Jmg(-1) for chitosan-coated microvesicles, providing a more stable structure that diminished the gaseous component lost and provided the persistence of intense (19)F-NMR signals after 48h, twice as long compared to plain samples. As a result, stronger and long-lasting ultrasonic signals were produced by the more stable chitosan-containing microvesicles, thus, presenting great potential to increase the diagnostic and therapeutic applications of perfluorocarbon carries.

Minimal synthetic cells to study integrin-mediated adhesion

To shed light on cell-adhesion-related molecular pathways, synthetic cells offer the unique advantage of a well-controlled model system with reduced molecular complexity. Herein, we show that liposomes with the reconstituted platelet integrin αIIb β3 as the adhesion-mediating transmembrane protein are a functional minimal cell model for studying cellular adhesion mechanisms in a defined environment. The interaction of these synthetic cells with various extracellular matrix proteins was analyzed using a quartz crystal microbalance with dissipation monitoring. The data indicated that integrin was functionally incorporated into the lipid vesicles, thus enabling integrin-specific adhesion of the engineered liposomes to fibrinogen- and fibronectin-functionalized surfaces. Then, we were able to initiate the detachment of integrin liposomes from these surfaces in the presence of the peptide GRGDSP, a process that is even faster with our newly synthesized peptide mimetic SN529, which specifically inhibits the integrin αIIb β3 .

Tethering of spherical DOTAP liposome gold nanoparticles on cysteamine monolayer for sensitive label free electrochemical detection of DNA and transfection

Construction of spherical liposomes is critical for developing tools for targeted gene and drug delivery applications in biotechnology and medicine, however, it has been demonstrated only in solution phase until now. Spherical liposome tethering on pristine thiol monolayer on gold transducer and its application to label free DNA sensing and transfection has rarely been reported. Here, we report tethering of spherical 1,2-dioleoyltrimethylammoniumpropane liposome-gold nanoparticle (DOTAP-AuNP) on amine terminated monolayer by simple electrostatic interaction on gold transducer for the first time. Cuddling of cationic liposome by AuNP prevents spherical vesicle fusion in both liquid and solid phases, an essential criterion required for gene and drug delivery applications. The spherical nature of DOTAP-AuNPs on a gold surface is confirmed electrochemically using both [Fe(CN)6](3-/4-) and [Ru(NH3)6](3+) redox probes. Atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), dynamic light scattering (DLS) and ultraviolet-visible (UV) spectroscopic techniques confirm the robust nature of spherical liposome-AuNPs on solid and in liquid phases. The surface is applied for label free DNA hybridization and single nucleotide polymorphism detections sensitively and selectively without signal amplification. The lowest target DNA concentration detected is 100 attomole. DNA transfection is made simply by dropping E. coli cells on DOTAP-AuNP-DNA immobilized transducer surface. The difference between the fluorescent image of transfected E. coli and the differential interference contrast image of E. coli cells by confocal laser scanning microscopy (CLSM) confirms the efficiency and simplicity of the transfection method developed in terms of reduced cost and reagents.

DPPG Liposomes Adsorbed on Polymer Cushions: Effect of Roughness on Amount, Surface Composition and Topography

The adsorption of intact liposomes onto solid supports is a fundamental issue when preparing systems with encapsulated biological molecules. In this work, the adsorption kinetic of 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt) liposomes onto cushions prepared from commom polyelectrolytes by the layer-by-layer technique was investigated with the main objective of finding the surface conditions leading to the adsorption of intact liposomes. For this purpose, different cushion surface roughnesses were obtained by changing the number of cushion bilayers. The adsorbed amount per unit area was measured through quartz crystal microbalance, surface morphology was characterized by atomic force microscopy, and the surface composition was assessed by X-ray photoelectron spectroscopy. The results show that (1) the amount of adsorbed lipids depends on the number of cushion bilayers, (2) the cushions are uniformly covered by the adsorbed lipids, and (3) the surface morphology of polymer cushions tunes liposome rupture and its adsorption kinetics. The fraction of ruptured liposomes, calculated from the measured amount of adsorbed lipids, is a function of surface roughness together with other surface morphology parameters, namely the dominating in-plane spatial feature size, the fractal dimension, and other textural features as well as amplitude and hybrid parameters.

Study of in situ adsorption kinetics of polyelectrolytes and liposomes using quartz crystal microbalance: Influence of experimental layout

Quartz Crystal Microbalance (QCM) is a widely used technique to characterize adsorption/desorption phenomena at the solid/liquid interface. However, the obtained adsorption/desorption kinetics curves are often not reproducible and present some noise and long term fluctuations. In this work, the accuracy of a commercial QCM to measure the adsorbed amount of polyelectrolytes and biological molecules was evaluated in terms of experimental QCM configurations with respect to quality, stability, and reproducibility of the measured data. Evaluation consisted in comparing the adsorption kinetics curves of the cationic polyelectrolyte poly(ethyleneimine) and the anionic 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (sodium salt) liposomes, when setting the quartz crystal surface in stationary horizontal open, stationary horizontal closed, stationary vertical open, continuous vertical closed, and stationary vertical closed measuring configuration. For this last configuration, a new cell was designed and implemented. The analysis of the kinetics curves revealed that horizontal modes are more unstable when subjected to fostering noise due to the mechanical vibrations and lead to resonance frequency shift. This shift is caused by the measurement of non-adsorbed molecules which are deposited on the quartz crystal due to gravity force. The vertical modes proved to be more reproducible and reliable.

Construction of spherical liposome on solid transducers for electrochemical DNA sensing and transfection

Cationic 1,2-dioleoyl trimethyl ammonium propane (DOTAP) and neutral 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) are anchored on cysteamine (cyst), mercaptopropionic acid (MPA) monolayer (thiol monolayers) modified on an individual gold transducer. DOTAP and DOPE are mixed with gold nanoparticle (AuNP) to form spherical liposome-AuNP. The electrochemical behaviors of the surface attached DOTAP-AuNP and DOPE-AuNP in presence of [Fe(CN)6](3-/4-) depend on the method of layer formation. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and ultraviolet (UV)-visible spectroscopic techniques are used to characterize the liposome-AuNP nanocomposite. The studies indicate stability of spherical liposome-AuNP on the gold transducer. Label-free DNA hybridization detection on these surfaces reveals different detection limits. Confocal laser scanning microscopy (CLSM) is used to confirm the cell transfection.

Gold surface supported spherical liposome-gold nano-particle nano-composite for label free DNA sensing

Immobilization of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) liposome-gold nano-particle (DOPE-AuNP) nano-composite covalently on 3-mercaptopropionic acid (MPA) on gold surface is demonstrated for the first time for electrochemical label free DNA sensing. Spherical nature of the DOPE on the MPA monolayer is confirmed by the appearance of sigmoidal voltammetric profile, characteristic behavior of linear diffusion, for the MPA-DOPE in presence of [Fe(CN)(6)](3-/4-) and [Ru(NH(3))(6)](3+) redox probes. The DOPE liposome vesicle fusion is prevented by electroless deposition of AuNP on the hydrophilic amine head groups of the DOPE. Immobilization of single stranded DNA (ssDNA) is made via simple gold-thiol linkage for DNA hybridization sensing in the presence of [Fe(CN)(6)](3-/4-). The sensor discriminates the hybridized (complementary target hybridized), un-hybridized (non-complementary target hybridized) and single base mismatch target hybridized surfaces sensitively and selectively without signal amplification. The lowest target DNA concentration detected is 0.1×10(-12)M. Cyclic voltammetry (CV), electrochemical impedance (EIS), differential pulse voltammetry (DPV) and quartz crystal microbalance (QCM) techniques are used for DNA sensing on DOPE-AuNP nano-composite. Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), Atomic Force Microscopy (AFM), Dynamic Light Scattering (DLS) and Ultraviolet-Visible (UV) spectroscopic techniques are used to understand the interactions between the DOPE, AuNP and ssDNA. The results indicate the presence of an intact and well defined spherical DOPE-AuNP nano-composite on the gold surface. The method could be applied for fabrication of the surface based liposome-AuNP-DNA composite for cell transfection studies at reduced reagents and costs.

Surface-bound cytomimetic assembly based on chemoselective and biocompatible immobilization and further modification of intact liposome

A surface-bound cytomimetic assembly based on chemically selective and biocompatible immobilization and further modification of intact liposome is described. Liposomes carrying PEG-triphenylphosphine were chemoselectively immobilized onto azide-modified glass slides through Staudinger ligation, followed by modification with azide-modified lactose as a model biomolecule through Staudinger ligation to afford the surface-bound cytomimetic assembly. The intact liposome immobilized and modified and its protein binding activity were confirmed by fluorescence imaging, fluorescent dye releasing kinetics, and AFM techniques. The resultant surface-bound cytomimetic assembly showed sustained stability and fluorescent dye releasing kinetics and specific protein binding activity. The reported method provides a robust platform for preparation of a complex immobilized liposome system with multifunctional components, which mimics the cell surface in both geographical and content features and thus will find important biomedical applications.

Liposome characterization by quartz crystal microbalance measurements and atomic force microscopy

This chapter reviews liposome characterization by quartz crystal microbalance (QCM) measurements and atomic force microscopy (AFM). In many studies, AFM imaging is simply used to image liposomes with resolution often that does not allow morphological analysis. Although liposome size can be obtained by processing AFM images, it is found that liposomes flatten upon surface adsorption or immobilization. Liposome stability and stiffness have been characterized by using AFM imaging or AFM force measurements, although the latter method, using a microsphere attached on the AFM cantilever, seems more appropriate to limit liposome damage and to obtain more quantitative analysis, such as the Young's modulus. Investigation of liposome layers by QCM revealed that liposomes can be detected from a combined analysis of frequency and bandwidth shifts. However, QCM by itself provides only limited information on liposomes. QCM can be used to assess the presence of a layer and also to discriminate between rigid and viscoelastic ones. Liposome properties have been derived from QCM curves, but often this requires making hypotheses that are difficult to assess. AFM and QCM analyses need to be combined with other techniques to provide complementary information.

Biosensor-based evaluation of liposomal binding behavior

Biosensors can be regarded as analytical devices that transform biologically given facts, such as the appearance of physiological substrates, or biological recognition processes of ligands and receptors into detectable signals without the need of further labeling. This chapter introduces acoustic wave sensors as mass-sensitive tools to investigate the liposomal binding behavior onto simulated biological surfaces. These sensors do not only allow for quantification of the liposomal binding intensity, but further analytical readings give insight into the liposomal appearance at the binding site, e.g., deformation or fusion. Since the liposomal behavior at the target binding site might have strong impact on therapeutic effects, a prediction of liposomal appearance and a controlled modulation thereof appear possible with the help of biosensors.Here, the function of a quartz crystal microbalance (QCM) and the bio-functionalization of quartz sensors are reported for a series of liposomal binding experiments. Liposomes containing biotin as model ligands were selected to evaluate their binding to avidin-modified sensors. The data, representing binding intensity and liposome deformation, are explained with respect to the role of binding strength and lipid composition for liposomal behavior.

Impact of phospholipid bilayer saturation on amyloid-beta protein aggregation intermediate growth: a quartz crystal microbalance analysis

Evidence that membrane-associated amyloid aggregate growth can impart membrane damage represents one possible mechanism for the neurodegeneration associated with deposited amyloid-beta protein (Abeta) aggregates in the brains of Alzheimer's disease (AD) patients. This potential pathogenic event necessitates an understanding of the impact that cellular membrane composition may have on Abeta aggregate growth. In the current study, a quartz crystal microbalance (QCM) was employed to examine the growth of Abeta(1-40) aggregation intermediates on supported phospholipid bilayers (SPBs) assembled at the crystal surface. These surface-specific measurements illustrate that zwitterionic SPBs selectively bind aggregated but not monomeric protein, and these bound aggregates are capable of supporting nonsaturable reversible growth via monomer addition. Growth-capable Abeta(1-40) aggregation intermediates more readily bind SPBs composed of phospholipids with a greater degree of carbon saturation. Furthermore, kinetic analysis afforded by the quantitative real-time QCM measurements reveals that SPBs with greater saturation also better support the growth of bound Abeta(1-40) aggregation intermediates as a result of the slower dissociation of bound monomer rather than more efficient recognition between aggregate and monomeric protein. These findings correlate with epidemiological and experimental evidence that links increased dietary intake of polyunsaturated fatty acids to a reduced risk of AD.

Calcein permeation across phosphatidylcholine bilayer membrane: effects of membrane fluidity, liposome size, and immobilization

The permeation of calcein across the phospholipid bilayer membrane is a key phenomenon in the detection system using liposomes as a sensor unit. The behavior of the calcein release from the liposome was analyzed by a first-order kinetic to obtain the permeability coefficient, Ps [cm/s]. The Ps value for the neutral liposome, prepared by zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), was found to depend on both the diameter of liposome and the temperature. The membrane fluidity of the POPC liposome, evaluated by the hydrophobic probe, 1-(4-trimethyl-aminophenyl)-6-diphenyl-1,3,5-hexatriene, was also dependent on the liposome diameter and the temperature. The Ps values for various neutral liposomes under gel phase or liquid-crystalline phase were correlated with their membrane fluidity, although some data were a little scattered, possibly due to the lamellarity. It is therefore considered that the membrane fluidity dominates the permeability of calcein across the neutral phospholipid membrane. Based on the above results, the Ps value for liposomes immobilized on the solid surface is discussed.

Sensing Escherichia coli O157:H7 via frequency shift through a self-assembled monolayer based QCM immunosensor

By means of the specific immuno-recognition and ultra-sensitive mass detection, a quartz crystal microbalance (QCM) biosensor for Escherichia coli O157:H7 detection was developed in this work. As a suitable surfactant, 16-mercaptohexadecanoic acid (MHDA) was introduced onto the Au surface of QCM, and then self-assembled with N-hydroxysuccinimide (NHS) raster as a reactive intermediate to provide an active interface for the specific antibody immobilization. The binding of target bacteria with the immobilized antibodies decreased the sensor's resonant frequency, and the frequency shift was correlated to the bacterial concentration. The stepwise assembly of the immunosensor was characterized by means of the electrochemical techniques. Using the immersion-dry-immersion procedure, this QCM biosensor could detect 2.0x10(2) colony forming units (CFU)/ml E. coli O157:H7. In order to reduce the fabrication time, a polyelectrolyte layer-by-layer self-assembly (LBL-SA) method was adopted for fast construction. Finally, the reproducibility of this biosensor was discussed.

Construction of nanogold hollow balls with dendritic surface as immobilized affinity support for protein adsorption

This contribution introduced the construction of nanosize gold hollow balls (NGB) with dendritic surface as the immobilized affinity support for aflatoxin B(1) antibody (anti-AFB(1)) adsorption, as a model protein, in biorecognition interface. The interaction between nanogold hollow balls and anti-AFB(1) was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and quartz crystal microbalance (QCM) technique. The deposited mass of anti-AFB(1) on the nanogold hollow ball-modified electrodes was more than that on the nanogold particle-modified electrodes via QCM analysis. The cyclic voltammogram tends to be more irreversible with anti-AFB(1) concentration increased. The antigen-antibody interaction was examined by using the nanogold hollow ball-modified QCM probes. Experimental results show that the developed protein assay system is sensitive to the concentration of AFB(1) as low as 0.05 ng mL(-1). Thus, the nanogold hollow ball is a useful matrix, and can be used as the immobilized affinity support for the adsorption of other proteins.

Fluorescence Study of the Fluidity and Cooperativity of the Phase Transitions of Zwitterionic and Anionic Liposomes Confined in Sol−Gel Glasses

The current work makes use of different fluorescent reporter molecules and fluorescent spectroscopic techniques to characterize the thermotropic, physical, and dynamical properties of large unilamellar liposomes formed from either 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) or 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-glycerol] (DMPG) encapsulated in sol-gel matrixes. In particular, cooperativity of the phase transition is analyzed from steady-state fluorescence anisotropy of 1,6-diphenyl-1,3,5-hexatriene (DPH), the interfacial properties are studied by measuring the spectral shift of Laurdan, and the structural organization (heterogeneity) of the lipid bilayer is determined from the fluorescence lifetime of trans-parinaric acid (t-PnA). In addition, information regarding order and dynamical properties in the bulk hydrophobic core is obtained from time-resolved fluorescence anisotropy of t-PnA and 3-(4-(6-phenyl)-1,3,5-hexatrienyl)-phenylpropionic acid (PA-DPH). The spectroscopic study reveals that upon encapsulation, the basic thermodynamic properties as well as the fluidity of the lipid bilayer practically remain intact for DMPG liposomes but not for DMPC liposomes, whose lipid bilayer exhibits large gel-fluid heterogeneity. On the basis of these experimental results, electrostatic interactions between phospholipid polar heads and the porous surface of the host matrix seem to play a capital role for the preservation of the structural integrity of encapsulated bilayer.