Simple expressions for diffusion coefficient determination of adsorption within spherical and cylindrical absorbents using direct simulation method

Kinetic study of time-dependent fixation of UVI on biochar

Biochar, a by-product from the production of biofuel and syngas by gasification, was tested as a material for adsorption and fixation of U^VI from aqueous solutions. A batch experiment was conducted to study the factors that influence the adsorption and time-dependent fixation on biochar at 20°C, including pH, initial concentration of U^VI and contact time. Uranium (U^VI) adsorption was highly dependent on pH but adsorption on biochar was high over a wide range of pH values, from 4.5 to 9.0, and adsorption strength was time-dependent over several days. The experimental data for pH>7 were most effectively modelled using a Freundlich adsorption isotherm coupled to a reversible first order kinetic equation to describe the time-dependent fixation of U^VI within the biochar structure. Desorption experiments showed that U^VI was only sparingly desorbable from the biochar with time and isotopic dilution with ²³³U^VI confirmed the low, or time-dependent, lability of adsorbed ²³⁸U^VI. Below pH 7 the adsorption isotherm trend suggested precipitation, rather than true adsorption, may occur. However, across all pH values (4.5-9) measured saturation indices suggested precipitation was possible: autunite below pH 6.5 and either swartzite, liebigite or bayleyite above pH 6.5.

Injectable in situ forming drug delivery system based on poly(epsilon-caprolactone fumarate) for tamoxifen citrate delivery: Gelation characteristics, in vitro drug release and anti-cancer evaluation

The present study deals with the preparation and characterization of an injectable and in situ forming drug delivery system based on photocrosslinked poly(epsilon-caprolactone fumarate) (PCLF) networks loaded with tamoxifen citrate (TC). Networks were made of PCLF macromers, a photoinitiation system (comprising initiator and accelerator) and the active ingredient N-vinyl-2-pyrrolidone (NVP) as a crosslinker and reactive diluent. Shrinkage behavior, equilibrium swelling and sol fraction ratios of photocrosslinked PCLF gels were determined as functions of NVP content. It was shown that the crosslinking is facilitated up to a certain concentration of NVP and most of NVP remained unreacted above this value. In vitro drug release, biocompatibility evaluation and activity against MCF-7 breast cancer cell line were also investigated. Accurate but simple bipartite expressions were also derived that enable rapid determination of effective diffusion coefficients of TC in photocrosslinked PCLF/NVP disks. Cytotoxicity assay showed that while the photocrosslinked PCLF network with optimum NVP content exhibits no significant cytotoxicity against MCF-7 and L929 cell lines, 40-60% of the MCF-7 cells were killed after incubation with TC-loaded devices.

A robust volumetric apparatus and method for measuring high pressure hydrogen storage properties of nanostructured materials

A volumetric apparatus to measure hydrogen adsorption and desorption at room temperature and up to 100 atm has been constructed and studied for accuracy, reproducibility, and stability. The design principles are presented and considerable attention to detail is given to examine the effects of diurnal temperature changes in the manifold and helium adsorption by carbon-based adsorbents during free volume measurement. A heuristic for helium correction is derived from a model with a basis in literature and verified through calculation of adsorbent density. Several materials with well-known hydrogen capacities are studied to examine reproducibility. The microporous carbon AX-21 is studied to examine the effects of pressure step size and approach to equilibrium caused by gas mixing and the Joule-Thomson effect. Hydrogen spillover on a hybrid material, Pt on templated carbon, is examined for several loadings of metal. Kinetics of both physisorption and spillover are compared via the diffusion time constant (D/R(2)) estimated by fitting models for pore and surface diffusion to time-dependent adsorption profiles. No concentration dependence was found for pore diffusion; however, the surface diffusion time constant was shown to decrease with respect to increasing hydrogen concentration.

Effective diffusion coefficient determination within cylindrical granules of adsorbents using a direct simulation method

Analytical expressions for solute adsorption kinetics within porous carbon cylindrical granules of adsorbents with a one point formula for effective diffusion coefficient determination are available based on the assumption that solute transport is the rate limiting step and that it follows Fick's Second Law. Here the first practical application of this theory is provided with an initial, estimated diffusion coefficient refined by fitting calculated kinetic adsorption curves to experimental data determined for activated carbons. In an ideal experiment, experimental error (noise) is negligible, and no data refinement is needed. However, real experimental data are always more or less noise contaminated. Where such noise is significant, a simulation method offers the best value for effective diffusion coefficient. For this specific system, surface modification, pH and temperature effects on adsorption kinetics were analysed quantitatively as a basis of determining effective diffusion coefficients through the porous structure.

Sensor biocompatibility: final frontier in bioanalytical measurement

Chemical and biosensors operate as direct sample contact systems; as such, the response of the biomatrix to their presence is as important as their response to the targeted analyte. There needs to be greater research emphasis on the response of biofluids to sensors because of the impact on sensor performance. Mainly, this is the result of deposited biolayers through the adsorption of colloids and proteins, followed by a more complex surface-active system: whole cells. Sensor surface engineering and controlled sample presentation through fluidics are likely to be able to mitigate some of these effects. Overall there needs to be a convergence with rapidly evolving research strategies in biomaterials if sensors are to make the full transition from the laboratory to the real world.

Bipartite expressions for diffusional mass transport in biomembranes

Analytical expressions for solute diffusion through a membrane barrier for different initial and boundary conditions are available in the literature. The three commonest initial and boundary conditions are for a membrane without solute respectively immersed in a solution of constant concentration, immersed in such a solution for one side but with the other side isolated, and immersed in such a solution for one side and with the other side kept at zero concentration. The physical quantities for the first two initial and boundary conditions are concentration and average concentration (the total solute entering the membrane) with amperometric current (flux) and solute that permeates through the membrane (charge passed) for the third initial and boundary condition. Expressions for these methods in the literature are inconvenient for practical applications because of the infinite mathematical series required. An investigation of convergence of these expressions was therefore carried out. Simple but accurate bipartite expressions for these methods were constructed and provided theoretical support for studies on mass transport characterization of biomembranes. As a specific application, these expressions enabled a direct fit of the simulated observables to experimental values to obtain diffusion coefficients. For these initial and boundary conditions and corresponding physical quantities, simple one point methods for diffusion coefficient estimation are also suggested. These latter diffusion coefficients can be initial values for numerical fit methods.