Influences of properties of protein and adsorption surface on removal kinetics of protein adsorbed on metal surface by H2O2-electrolysis treatment

Reactive Oxygen Species Formed by Metal and Metal Oxide Nanoparticles in Physiological Media—A Review of Reactions of Importance to Nanotoxicity and Proposal for Categorization

Diffusely dispersed metal and metal oxide nanoparticles (NPs) can adversely affect living organisms through various mechanisms and exposure routes. One mechanism behind their toxic potency is their ability to generate reactive oxygen species (ROS) directly or indirectly to an extent that depends on the dose, metal speciation, and exposure route. This review provides an overview of the mechanisms of ROS formation associated with metal and metal oxide NPs and proposes a possible way forward for their future categorization. Metal and metal oxide NPs can form ROS via processes related to corrosion, photochemistry, and surface defects, as well as via Fenton, Fenton-like, and Haber–Weiss reactions. Regular ligands such as biomolecules can interact with metallic NP surfaces and influence their properties and thus their capabilities of generating ROS by changing characteristics such as surface charge, surface composition, dissolution behavior, and colloidal stability. Interactions between metallic NPs and cells and their organelles can indirectly induce ROS formation via different biological responses. H₂O₂ can also be generated by a cell due to inflammation, induced by interactions with metallic NPs or released metal species that can initiate Fenton(-like) and Haber–Weiss reactions forming various radicals. This review discusses these different pathways and, in addition, nano-specific aspects such as shifts in the band gaps of metal oxides and how these shifts at biologically relevant energies (similar to activation energies of biological reactions) can be linked to ROS production and indicate which radical species forms. The influences of kinetic aspects, interactions with biomolecules, solution chemistry (e.g., Cl⁻ and pH), and NP characteristics (e.g., size and surface defects) on ROS mechanisms and formation are discussed. Categorization via four tiers is suggested as a way forward to group metal and metal oxide NPs based on the ROS reaction pathways that they may undergo, an approach that does not include kinetics or environmental variations. The criteria for the four tiers are based on the ability of the metallic NPs to induce Fenton(-like) and Haber–Weiss reactions, corrode, and interact with biomolecules and their surface catalytic properties. The importance of considering kinetic data to improve the proposed categorization is highlighted.

Sustainable and feasible reagent-free electro-Fenton via sequential dual-cathode electrocatalysis

Electro-Fenton processes aim at producing oxidizing radicals with fewer added chemicals and residues but are still unable to completely eliminate both. This study demonstrates that a reagent-free electro-Fenton process that runs solely on oxygen and electricity can be achieved by sequential dual-cathode electrocatalysis. H₂O₂ is produced on an electrodeposited PEDOT on carbon cloth (PEDOT/CC) cathode and subsequently converted to hydroxyl radicals on a stainless-steel-mesh cathode. The dual-cathode system demonstrates efficient decolorization and total organic carbon (TOC) removal toward organic dyes at optimized cathodic potentials of -0.9 V for PEDOT/CC and -0.8 V for the stainless-steel mesh. The sequential dual-cathode process also displays high reusability, no iron leaching, high removal efficiency using air instead of oxygen, and low installation and operation costs. This work demonstrates a preeminent and commercially viable example of pollution control rendered by the "catalysis instead of chemical reagent" philosophy of green chemistry.

Titanium and Protein Adsorption: An Overview of Mechanisms and Effects of Surface Features

Titanium and its alloys, specially Ti6Al4V, are among the most employed materials in orthopedic and dental implants. Cells response and osseointegration of implant devices are strongly dependent on the body-biomaterial interface zone. This interface is mainly defined by proteins: They adsorb immediately after implantation from blood and biological fluids, forming a layer on implant surfaces. Therefore, it is of utmost importance to understand which features of biomaterials surfaces influence formation of the protein layer and how to guide it. In this paper, relevant literature of the last 15 years about protein adsorption on titanium-based materials is reviewed. How the surface characteristics affect protein adsorption is investigated, aiming to provide an as comprehensive a picture as possible of adsorption mechanisms and type of chemical bonding with the surface, as well as of the characterization techniques effectively applied to model and real implant surfaces. Surface free energy, charge, microroughness, and hydroxylation degree have been found to be the main surface parameters to affect the amount of adsorbed proteins. On the other hand, the conformation of adsorbed proteins is mainly dictated by the protein structure, surface topography at the nano-scale, and exposed functional groups. Protein adsorption on titanium surfaces still needs further clarification, in particular concerning adsorption from complex protein solutions. In addition, characterization techniques to investigate and compare the different aspects of protein adsorption on different surfaces (in terms of roughness and chemistry) shall be developed.

Adsorption Properties of Arc Produced Multi Walled Carbon Nanotubes for Bovine Serum Albumin

In this study, adsorption properties of arc produced Multi Walled Carbon Nanotubes (MWNT) were investigated for Bovine Serum Albumin (BSA) in aqueous phase. Solution pH, adsorbent amount and temperature effects were examined on protein adsorption. The results show that, the temperature and the adsorbent amount both increase the BSA adsorption, whereas the solution pH has a decreasing effect. The equilibrium behavior of protein adsorption was examined by Langmuir and Freundlich isotherms. The monolayer adsorption capacities at 40 °C for solution pH 4 and 5 were determined as 139.5 and 127.2 mg g−1, respectively, which were much higher than the BSA adsorption capacities of various metal oxides investigated in our previous studies. The adsorption rate data were compared by the pseudo-first and the second-order kinetics equations. Evaluation of the experimental kinetics data have shown that the adsorption of BSA by MWNT followed the pseudo-first-order kinetics. The pseudo-first order adsorption rate constants at pH 4 and 5 decreased with an increase in temperature which results in a decrease in diffusion rate of BSA molecules across the external boundary layer, and favors the sorption process. The adsorption behavior of protein by carbon nanotubes was explained also using the zeta potential measurements. The adsorption capacity decreased with increasing pH due to the electrostatic repulsions. The thermodynamic parameters evaluated to predict the nature of adsorption confirmed the non-spontaneous and endothermic behaviour of the BSA/MWNT adsorption process. Adsorption standard enthalpy values were found as ∆H0=59.5 kJ mol−1 and ∆H0=14.3 kJ mol−1 for pH 4 and 5, respectively indicating that the protein molecules are adsorbed electrostatically on the carbon nanotubes.

Electrolysis-assisted sonication for removal of proteinaceous contamination from surgical grade stainless steel

BACKGROUND

Current methods used for the detection of residual proteinaceous contamination vary in sensitivity and specificity. This is of concern because it increases the risk for transmission of neurodegenerative diseases such as spongiform encephalopathies.

AIM

To determine the effectiveness of electrolysis-assisted sonication (EAS) for removing residual proteinaceous contamination from surgical grade stainless steel.

METHODS

EAS was used to clean surgical grade 316L stainless steel that had been contaminated with the protein bovine serum albumin. Using nitrogen, an abundant element in proteins, as a marker for the presence of protein, X-ray photoelectron spectroscopy (XPS) was used to quantify the amount of protein remaining on the substrate surface. Cathodic, anodic and dual polarization modes of EAS were investigated using 0.1% NaCl solution (w/v, in deionized water) as the electrolyte medium and 13 V as the polarization voltage.

FINDING

EAS under dual polarization was found to be the most effective method for removing the residual protein layer down to an estimated XPS detection limit of 10 ng/cm(2). Surface roughness and hardness of the stainless steel remained unchanged following EAS treatment, indicating that the procedure does not compromise the material's properties.

CONCLUSION

This relatively inexpensive and quick method of cleaning medical devices using an easily accessible salt-based electrolyte solution may offer a cost-effective strategy for cleaning medical and dental devices made of stainless steel in the future.

Biomolecule-biomaterial interaction: a DFT-D study of glycine adsorption and self-assembly on hydroxylated Cr2O3 surfaces

The adsorption of glycine, the building block of amino acids, on hydroxylated (0001)-Cr2O3 model surfaces, representing the stainless steel passive film surface, was modeled by means of the GGA + U method. The roles of glycine coverage and surface termination (hydroxylated Cr- and O-terminated surfaces) on the adsorption mode and self-assembly properties were explored. The hydroxylated Cr-terminated Cr2O3 surface, which presents two types of (H)OH groups exhibiting different acidic character, is more reactive than the hydroxylated O-terminated surface, where one single type of OH group is present, for all adsorption modes and coverages considered. Outer sphere adsorption occurs in the zwitterion form, stabilized at low coverage through H-bond formation with coadsorbed water molecules, and at the monolayer coverage by glycine self-assembling. The OH substitution by glycinate is favored on the hydroxylated Cr-terminated surface and not on the O-terminated one. The inclusion of dispersion forces does not change the observed tendencies. An atomistic thermodynamics approach suggests that outer sphere adsorption is thermodynamically favored over inner sphere adsorption in the whole domain of glycine concentration. The obtained SAM's free energies of formation are rationalized in a model considering the balance between sublimation and solvation free energies, and extrapolated to other amino acids, to predict the SAMs formation above hydroxylated surfaces. It is found that hydrophobic AA tend to self-assemble at the surface, whereas hydrophilic ones do not.