Visible light-induced surfactant-free emulsion polymerization using camphorquinone/tertiary amine as the initiating system for the synthesis of amine-functionalized colloidal nanoparticles

Visible-Light Initiated Dispersion Photopolymerization of Styrene

Polystyrene (PS) particles were synthesized in ethanol/water mixture by dispersion polymerization using visible light irradiation, with either a N-heterocyclic carbene borane-based photoinitiating system (PIS) or a disulfide. With the full PIS and poly(ethylene glycol) methyl ether methacrylate (PEGMA) as stabilizer, the size distributions were broad and the amount of PEGMA had a strong impact on the experiment reproducibility. The addition of a base solved the problem, leading to faster polymerizations, narrower size distributions and larger particles. With the disulfide as sole PIS, bigger and narrowly distributed PS particles were again formed. Quantitative conversion was achieved in each system, with particle size ranging between 100 and 350 nm. The use of poly(N-vinylpyrrolidone) as stabilizer led to significantly larger particles, up to 1.2 μm, with narrow size distributions. The production of such large latex particles by photoinitiated polymerizations is unprecedented.

Green synthesis of quaternized chitosan nanogel using emulsion-photopolymerization as redox-responsive drug carrier

We report the green synthesis of trimethyl chitosan-functionalized poly(2-hydroxyethyl methacrylate) (PHEMA-TMC) nanogels via surfactant-free emulsion photopolymerization. TMC, a quaternized derivative of chitosan, was synthesized through methylation of chitosan, resulting in quaternary and tertiary amine groups as the main substitution products. TMC tertiary amine moiety and riboflavin (RF) acted as a redox photo-initiating system to generate free radicals for the polymerization under light irradiation. The effects of polymerization parameters such as irradiation time, concentrations of TMC and RF were investigated using MBA as crosslinker. Under the optimal condition of 1 % TMC, 4 % HEMA, 0.8 μM RF, 5 % MBA, and 4 h of polymerization time, the cationic PHEMA-TMC nanogel was synthesized with 76 % monomer conversion and an average diameter of about 106 nm. Moreover, the disulfide-crosslinked PHEMA-TMC nanogel was also synthesized using the disulfide dimethacrylate crosslinker, which exhibited a redox-induced degradation and release of encapsulated melatonin, potentially useful as a redox-responsive drug delivery carrier.

Molecular structure-tuned stability and switchability of CO2-responsive oil-in-water emulsions

HYPOTHESIS

Pseudo-Gemini surfactants (PGS) possessing switchable and recyclable features have drawn increasing attention on generating high-performance CO₂-responsive emulsions for wide range and versatile applications. However, there is a lack of fundamental understanding on how the molecular structure of PGS affects the stability and switchability of emulsions. We hypothesize that the length and type of the spacer in PGS play a decisive role in controlling interfacial and switching properties.

EXPERIMENTS

Two series of PGS with different spacers were prepared through electrostatic association between amines and oleic acid. The interfacial activity and CO₂-responsive properties of corresponding emulsions were systematically investigated by well-designed experiments and molecular dynamics simulations.

FINDINGS

Increasing the spacer length to allow the bent configuration leads to more tight arrangement of oleic molecules, consequently improving the interfacial activity. In addition, the introduction of amino group into the spacer dramatically promotes CO₂ response of resulting PGS due to ehanced migration of the spacer from the interface to the aqueous phase after CO₂ addition. These results are inspiring in designing controllable CO₂-responsive emulsions for a wide range of industrial applications (e.g., enhanced oil recovery and oil-contaminated soil remediation).

Preparation of ultrasmall nanogels by facile emulsion-free photopolymerization at 532 nm

Nanogels have been widely prepared and characterized in recent years due to their unique advantages. Here, an effective, original, and facile method of emulsion-free photopolymerization at 532 nm without surfactant was developed to prepare nanogels based on poly(ethylene glycol) diacrylate (PEGDA). The 532 nm continuous laser with symmetrical energy distribution like a three-dimensional shape of a straw hat was used to control the reaction region. The self-emulsification of PEGDA in water was studied and PEGDA micelles were directly cross-linked by controlling the laser energy. The number of micelles participating in the microreaction region and the double bond crosslinking between micellar aggregates and inside micelles were reasonably regulated. The size of the nanogels could be effectively modulated by controlling reaction parameters including laser power, monomer concentration, initiator concentration, and reaction time. Finally, ultrasmall nanogels with around 30 nm in size were prepared by balancing double bond crosslinking between micellar aggregates and inside micelles.

Synthesis and Characterization of Dental Nanocomposite Resins Filled with Different Clay Nanoparticles

Nanotechnology comprises a promising approach towards the update of dental materials.The present study focuses on the reinforcement ofdental nanocomposite resins with diverse organomodified montmorillonite (OMMT) nanofillers. The aim is to investigate whether the presence of functional groups in the chemical structure of the nanoclay organic modifier may virtually influence the physicochemical and/or the mechanical attitude of the dental resin nanocomposites. The structure and morphology of the prepared materials were investigated by means of wide angle X-ray diffraction and scanning electron microscopy analysis. Fourier transform infrared spectroscopy was used to determine the variation of the degree of conversion over time. Measurements of polymerization shrinkage and mechanical properties were conducted with a linear variable displacement transducer apparatus and a dynamometer, respectively. All the obtained nanocomposites revealed intercalated structures and most of them had an extensive filler distribution into the polymer matrix. Polymerization kinetics werefound to be influenced by the variance of the clay organomodifier, whilenanoclays with vinyl groups considerably increased the degree of conversion. Polymerization shrinkage was almost limited up to 50% by incorporating nanoclays. The absence of reactive groups in the OMMT structure may retain setting contraction atlow levels. An enhancement of the flexural modulus was observed, mainly by using clay nanoparticles decorated with methacrylated groups, along with a decrease in the flexural strength at a high filler loading. The overall best performance was found for the nanocomposites with OMMTs containing double bonds. The significance of the current work relies on providing novel information about chemical interactions phenomena between nanofillers and the organic matrix towards the improvement of dental restorative materials.

Simple one-pot syntheses of water-soluble bis(acyl)phosphane oxide photoinitiators and their application in surfactant-free emulsion polymerization

The sodium salt of the new bis(mesitoyl)phosphinic acid (BAPO-OH) can be prepared in a very efficient one-pot synthesis. It is well soluble in water and hydrolytically stable for at least several weeks. Remarkably, it acts as an initiating agent for the surfactant-free emulsion polymerization (SFEP) of styrene to yield monodisperse, spherical nanoparticles. Time-resolved electron paramagnetic resonance (TR-EPR) and chemically induced electron polarisation (CIDEP) indicate preliminary mechanistic insights.