Liquid-phase exfoliation of expanded graphites into graphene nanoplatelets using amphiphilic organic molecules

Characterization of polycaprolactone/rGO nanocomposite scaffolds obtained by electrospinning

The incorporation of nanoparticles inside polymeric matrices has led to the development of multifunctional composites necessary to repair human tissues. The addition of nanoparticles may improve the properties of the composite materials such as surface area, mechanical properties, flexibility, hydrophilicity, electrical conductivity, etc. These properties can help in cellular growth, proliferation and/or differentiation. In this work, scaffolds of polycaprolactone (PCL) and reduced graphite oxide (rGO) were built by electrospinning technique. The ratios of rGO/PCL employed were 0.25, 0.5, 0.75 and 1 wt%. Two different voltage setup (10 and 15 kV) and distance of 10 cm were used for electrospinning. Thermal, mechanical, morphological, electrical, porosity and absorption water tests were made to the scaffolds. Samples electrospun at 10 kV with rGO showed improvement in mechanical properties with an increase of 190% of Young's Modulus in comparison with sample without rGO. Furthermore, samples electrospun at 15 kV showed an important deterioration with the addition of rGO but had an increase in the electrical conductivity and porosity. Overall, the addition of 0.75 and 1 wt% of rGO led to a detriment on properties due to formation of aggregates. The voltage on the electrospinning process plays a very important role in the final properties of the nanocomposites scaffolds of PCL-rGO.

Mechanistic Insight into the Chemical Exfoliation and Functionalization of Ti3C2 MXene

MXene, a two-dimensional layer of transition metal carbides/nitrides, showed great promise for energy storage, sensing, and electronic applications. MXene are chemically exfoliated from the bulk MAX phase; however, mechanistic understanding of exfoliation and subsequent functionalization of these technologically important materials is still lacking. Here, using density-functional theory we show that exfoliation of Ti3C2 MXene proceeds via HF insertion through edges of Ti3AlC2 MAX phase. Spontaneous dissociation of HF and subsequent termination of edge Ti atoms by H/F weakens Al-MXene bonds. Consequent opening of the interlayer gap allows further insertion of HF that leads to the formation of AlF3 and H2, which eventually come out of the MAX, leaving fluorinated MXene behind. Density of state and electron localization function shows robust binding between F/OH and Ti, which makes it very difficult to obtain controlled functionalized or pristine MXene. Analysis of the calculated Gibbs free energy (ΔG) shows fully fluorinated MXene to be lowest in energy, whereas the formation of pristine MXene is thermodynamically least favorable. In the presence of water, mixed functionalized Ti3C2Fx(OH)1-x (x ranges from 0 to 1) MXene can be obtained. The ΔG values for the mixed functionalized MXenes are very close in energy, indicating the random and nonuniform functionalization of MXene. The microscopic understanding gained here unveils the challenges in exfoliation and controlling the functionalization of MXene, which is essential for its practical application.

Mechanical, Thermal, and Electrical Properties of Graphene-Epoxy Nanocomposites-A Review

Monolithic epoxy, because of its brittleness, cannot prevent crack propagation and is vulnerable to fracture. However, it is well established that when reinforced—especially by nano-fillers, such as metallic oxides, clays, carbon nanotubes, and other carbonaceous materials—its ability to withstand crack propagation is propitiously improved. Among various nano-fillers, graphene has recently been employed as reinforcement in epoxy to enhance the fracture related properties of the produced epoxy–graphene nanocomposites. In this review, mechanical, thermal, and electrical properties of graphene reinforced epoxy nanocomposites will be correlated with the topographical features, morphology, weight fraction, dispersion state, and surface functionalization of graphene. The factors in which contrasting results were reported in the literature are highlighted, such as the influence of graphene on the mechanical properties of epoxy nanocomposites. Furthermore, the challenges to achieving the desired performance of polymer nanocomposites are also suggested throughout the article.

Chemical Mass Production of Graphene Nanoplatelets in ∼100% Yield

Successful application of graphene is hampered by the lack of cost-effective methods for its production. Here, we demonstrate a method of mass production of graphene nanoplatelets (GNPs) by exfoliation of flake graphite in the tricomponent system made by a combination of ammonium persulfate ((NH4)2S2O8), concentrated sulfuric acid, and fuming sulfuric acid. The resulting GNPs are tens of microns in diameter and 10-35 nm in thickness. When in the liquid phase of the tricomponent media, graphite completely loses its interlayer registry. This provides a ∼100% yield of GNPs from graphite in 3-4 h at room temperature or in 10 min at 120 °C.

Liquid-Phase Exfoliation of Phosphorene: Design Rules from Molecular Dynamics Simulations

The liquid-phase exfoliation of phosphorene, the two-dimensional derivative of black phosphorus, in the solvents dimethyl sulfoxide (DMSO), dimethylformamide (DMF), isopropyl alcohol, N-methyl-2-pyrrolidone, and N-cyclohexyl-2-pyrrolidone is investigated using three molecular-scale "computer experiments". We modeled solvent-phosphorene interactions using an atomistic force field, based on ab initio calculations and lattice dynamics, that accurately reproduces experimental mechanical properties. We probed solvent molecule ordering at phosphorene/solvent interfaces and discovered that planar molecules such as N-methyl-2-pyrrolidone preferentially orient parallel to the interface. We subsequently measured the energy required to peel a single phosphorene monolayer from a stack of black phosphorus and analyzed the role of "wedges" of solvent molecules intercalating between phosphorene sheets in initiating exfoliation. The exfoliation efficacy of a solvent is enhanced when either molecular planarity "sharpens" this molecular wedge or strong phosphorene-solvent adhesion stabilizes the newly exposed phosphorene surfaces. Finally, we examined the colloidal stability of exfoliated flakes by simulating their aggregation and showed that dispersion is favored when the cohesive energy between the molecules in the solvent monolayer confined between the phosphorene sheets is high (as with DMSO) and is hindered when the adhesion between these molecules and phosphorene is strong; the molecular planarity in solvents like DMF enhances the cohesive energy. Our results are consistent with, and provide a molecular context for, experimental exfoliation studies of phosphorene and other layered solids, and our molecular insights into the significant role of solvent molecular geometry and ordering should complement prevalent solubility-parameter-based approaches in establishing design rules for effective nanomaterial exfoliation media.