Enhancing the photocatalytic activity of bulk g-C3N4 by introducing mesoporous structure and hybridizing with graphene

A phosphonium ionic liquid conjugated magnetic graphitic carbon nitride nanocomposite: an effective sample pretreatment tool for selenium separation and determination

We established an innovative and easy-to-use methodology for selenium (Se) extraction and determination from real water samples utilizing a magnetic nanocomposite adsorbent (MNC-SPE) aided by an inductively coupled plasma mass spectrometry (ICP-MS) approach. The MNC-SPE adsorbent was fabricated by hybridizing Fe3O4 nanoparticles on the surface of carbon nitride nanosheets (GCN NSs) that were coated with 1-hexyl-3-methylimidazolium hexafluorophosphate ionic liquid (P-IL). A variety of techniques were used to thoroughly analyze the structural and chemical characteristics of MNC-SPE, and appear to have a great number of diverse active surface functional units (imidazole ring and -NH3+). In order to optimize the key factors affecting the Se extraction, parameters including the adsorbent dosage, contact time, eluent type, eluent volume, eluent time, and reusability of adsorbent were extensively studied. The proposed approach was validated under the optimal reaction conditions, and it showed good linearity between 0.15 and 100 pg μL-1 with a significant R2 value (R2 = 0.9994) toward Se metal. Besides, the Se limit of detection (LOD) and limit of quantification (LOQ) are 0.063 pg μL-1 and 0.147 pg μL-1, respectively. Further, by utilizing tap and river water samples, the applicability of the validated method was tested; the approach showed high Se recovery values in the range of 87.6-115.5% for the spiked real-world samples and the interday and intraday precision (RSD%) values of the approach were 4.8% (n = 6). The MNC-SPE can be regenerated and reused for four consecutive extraction-desorption cycles by employing 0.5 M NaOH eluent.

Graphitic carbon nitride (g-C3N4)-assisted materials for the detection and remediation of hazardous gases and VOCs

Graphitic carbon nitride (g-C3N4)-based materials are attracting attention for their unique properties, such as low-cost, chemical stability, facile synthesis, adjustable electronic structure, and optical properties. These facilitate the use of g-C3N4 to design better photocatalytic and sensing materials. Environmental pollution by hazardous gases and volatile organic compounds (VOCs) can be monitored and controlled using eco-friendly g-C3N4- photocatalysts. Firstly, this review introduces the structure, optical and electronic properties of C3N4 and C3N4 assisted materials, followed by various synthesis strategies. In continuation, binary and ternary nanocomposites of C3N4 with metal oxides, sulfides, noble metals, and graphene are elaborated. g-C3N4/metal oxide composites exhibited better charge separation that leads to enhancement in photocatalytic properties. g-C3N4/noble metal composites possess higher photocatalytic activities due to the surface plasmon effects of metals. Ternary composites by the presence of dual heterojunctions improve properties of g-C3N4 for enhanced photocatalytic application. In the later part, we have summarised the application of g-C3N4 and its assisted materials for sensing toxic gases and VOCs and decontaminating NOx and VOCs by photocatalysis. Composites of g-C3N4 with metal and metal oxide give comparatively better results. This review is expected to bring a new sketch for developing g-C3N4-based photocatalysts and sensors with practical applications.

Recent advances in photocatalytic self-cleaning performances of TiO2-based building materials

TiO₂-based photocatalytic building materials can keep the building surface clean, and have decontamination, antibacterial effects and so on, which greatly reduces the maintenance cost and the risk of cleaning work, and these materials have great application potential in pollution and carbon reduction in the future. However, due to the wide band gap of TiO₂, the low utilization of solar energy and the instability of super hydrophilicity have always been the difficulties in the field of photocatalysis. Based on the relevant research of TiO₂-based photocatalytic materials in recent years, this review summarizes the modification strategies that can effectively improve the photocatalytic activity of TiO₂-based photocatalytic materials. At the same time, the influence of complex environmental factors and substrate properties on the self-cleaning behavior of TiO₂-based building materials was analyzed. This paper aims to provide effective guidance for the future application of TiO₂-based photocatalysts in the construction field, improve people's understanding of photocatalytic building materials (PBM) and photocatalytic self-cleaning characteristics, and provide more possibilities for the extensive application of photocatalysis technology in the construction field, as well as to promote the realization of global carbon neutrality and other strategic goals of pollution and carbon reduction.

Construction of Waste Chalk Powder into mpg-C3N4-CaSO4 as an Efficient Photocatalyst for Dye Degradation under UV-Vis Light and Sunlight

In this article, we present the synthesis of calcium sulfate nanoparticles (CaSO₄ NPs) from waste chalk powder by the calcination method. These CaSO₄ NPs were utilized for the construction of a mesoporous graphitic carbon nitride-calcium sulfate (mpg-C₃N₄-CaSO₄) photocatalyst. Synthesized materials were confirmed by several characterization techniques. The photocatalytic performance of the synthesized samples was tested by the degradation of methylene blue (MB) in the presence of both UV-vis light and sunlight. The efficiency of photocatalytic degradation of MB dye using the optimized mpg-C₃N₄-CaSO₄-2 composite reached 91% within 90 min in the presence of UV-vis light with superb photostability and recyclability after five runs compared to individual mpg-C₃N₄ and CaSO₄ NPs and reached 95% within 120 min under sunlight. Histotoxicological studies on fish liver and ovary indicated that the dye containing the solution damaged the structure of the liver and ovary tissues, whereas the photodegraded solution of MB was found to be less toxic and caused negligible alterations in their typical structure similar to the control group.

Environmentally sustainable implementations of two-dimensional nanomaterials

Rapid advancement in nanotechnology has led to the development of a myriad of useful nanomaterials that have novel characteristics resulting from their small size and engineered properties. In particular, two-dimensional (2D) materials have become a major focus in material science and chemistry research worldwide with substantial efforts centered on their synthesis, property characterization, and technological, and environmental applications. Environmental applications of these nanomaterials include but are not limited to adsorbents for wastewater and drinking water treatment, membranes for desalination, and coating materials for filtration. However, it is also important to address the environmental interactions and implications of these nanomaterials in order to develop strategies that minimize their environmental and public health risks. Towards this end, this review covers the most recent literature on the environmental implementations of emerging 2D nanomaterials, thereby providing insights into the future of this fast-evolving field including strategies for ensuring sustainable development of 2D nanomaterials.

Valorization of Waste Tungsten Filament into mpg-C3N4-WO3 Photocatalyst: A Sustainable e-Waste Management and Wastewater Treatment

The waste of tungsten filament materials in the environment is one of the reasons for environmental pollution, and it is very dangerous to animals and plants. To date, not much attention has been given to its utility or recyclability. Herein, the present work reported the synthesis of tungsten trioxide nanoparticles (WO₃ NPs) by the utilization of cost-free waste tungsten filament by a simple calcination method. A mesoporous graphitic carbon nitride-tungsten trioxide (mpg-C₃N₄-WO₃) composite designed from the WO₃ NPs produced from tungsten filament waste and thiourea as a carbon and nitrogen precursor by a one-step calcination method. The synthesized samples were characterized and confirmed by different characterization techniques. The photocatalytic behavior of the synthesized mpg-C₃N₄-WO₃ composite was assessed, with respect to the effect of initial pH, amount of photocatalyst, dye concentration, and reaction time, as well for the degradation of Methylene Blue (MB) dye under sunlight. The best photocatalytic performance (92%) was achieved using mpg-C₃N₄-WO₃ with experimental condition ([photocatalyst] = 100 mg/L, [MB]₀ = 10 mg/L, pH 8, and time = 120 min) under sunlight irradiation with excellent photostability than that of isolated mpg-C₃N₄ and WO₃ NPs. The histotoxicological studies also showed that the photodegraded products of MB were found to be nontoxic and did not structurally changes in the gill architecture as well as brain tissues of freshwater fish Labeo rohita.

Evaluation of a photoelectrochemical platform based on strontium titanate, sulfur doped carbon nitride and palladium nanoparticles for detection of SARS-CoV-2 spike glycoprotein S1

This work aims to develop a photoelectrochemical (PEC) platform for detection of SARS-CoV-2 spike glyprotein S1. The PEC platform is based on the modification of a fluorine-doped tin oxide (FTO) coated glass slide with strontium titanate (SrTiO₃ or ST), sulfur-doped carbon nitride (g-C₃N₄-S or CNS) and palladium nanoparticles entrapped in aluminum hydroxide matrix (PdAlO(OH) or PdNPs). The PEC platform was denoted as PdNPs/CNS/ST/FTO and it was characterized by SEM, TEM, FTIR, DRX, and EIS. The PEC response of the PdNPs/CNS/ST/FTO platform was optimized by evaluating the effects of the concentration of the donor molecule, the nature of the buffer, pH, antibody concentration, potential applied to the working electrode, and incubation time. The optimized PdNPs/CNS/ST/FTO PEC platform was modified with 5 μg mL^-1 of antibody for determination of SARS-CoV-2 spike glycoprotein S1. A decrease in the photocurrent was observed with an increase in the concentration of SARS-CoV-2 from 1 fg mL^-1 to 1000 pg mL^-1 showing that the platform is a promising alternative for the detection of S1 protein from SARS-CoV-2. The designed PEC platform exhibited recovery percentages of 96.20% and 109.65% in artificial saliva samples.

The Growth of Extended Melem Units on g-C3N4 by Hydrothermal Treatment and Its Effect on Photocatalytic Activity of g-C3N4 for Photodegradation of Tetracycline Hydrochloride under Visible Light Irradiation

In this work, the growth of extended tri-s-triazine units (melem units) on g-C₃N₄ (CN) by hydrothermal treatment and its effect on the photodegradation efficiency of tetracycline hydrochloride (TC) is investigated. The CN-180-x and CN-200-6 samples were prepared using different hydrolysis times and temperatures, and they were characterized by multiple physicochemical techniques. In addition, their photodegradation performance was evaluated under visible light irradiation. Compared to the CN, CN-180-6 possesses remarkable photocatalytic degradation efficiency at 97.17% towards TC removal in an aqueous solution. The high visible-light-induced photo-reactivity of CN-180-6 directly correlates to charge transfer efficiency, numerous structural defects with a high specific surface area (75.0 m² g^-1), and sufficient O-functional groups over g-C₃N₄. However, hydrothermal treatment at a higher temperature or during a longer time additionally induces the growth of extended melem units on the surface of g-C₃N₄, resulting in the inhibition of the charge transfer. In addition, the superoxide radical is proven to be generated from photoexcited reaction and plays a key role in the TC degradation.

Multi-layered g-C3N4 as a Fluorescent Probe for Hg2+ Detection

Hg²⁺ is one of the most toxic heavy metal ions that exist in the environment and it forms large numbers of toxic binary compounds. Accurate and rapid detection of the concentration of heavy metal ions is a prerequisite technology to achieve pollution control and prevention. Fluorescent probes have attracted extensive attention because of their high sensitivity, prominent precision, convenient and fast visualization of heavy metals. Herein, we report multi-layered graphitic carbon nitride via a simple thermopolymerization treatment as a very effectual fluorescent probe for sensitive and selective detection of Hg²⁺ with a limit of detection as low as 1.14 nM.

Facile Synthesis of Porous g-C3N4 with Enhanced Visible-Light Photoactivity

Porous graphitic carbon nitride (g-C₃N₄) was prepared by dicyandiamide and urea via the pyrolysis method, which possessed enhanced visible-light-driven photocatalytic performance. Its surface area was increased from 17.12 to 48.00 m²/g. The porous structure not only enhanced the light capture capacity, but also accelerated the mass transfer ability. The Di (Dicyandiamide)/Ur (Urea) composite possessed better photocatalytic activity for Rhodamine B in visible light than that of g-C₃N₄. Moreover, the Di/Ur-4:5 composite showed the best photoactivity, which was almost 5.8 times that of g-C₃N₄. The enhanced photocatalytic activity showed that holes and superoxide radical played a key role in the process of photodegradation, which was ascribed to the enhanced separation of photogenerated carriers. The efficient separation of photogenerated electron-hole pairs may be owing to the higher surface area, O dopant, and pore volumes, which can not only improve the trapping opportunities of charge carriers but also the retarded charge carrier recombination. Therefore, it is expected that the composite would be a promising candidate material for organic pollutant degradation.

Nanostructure Engineering of Graphitic Carbon Nitride for Electrochemical Applications

Graphitic carbon nitride with ordered two-dimensional structure displays multiple properties, including tunable structure, suitable bandgap, high stability, and facile synthesis. Many achievements on this material have been made in photocatalysis, but the advantages have not yet been fully explored in electrochemical fields. The bulk structure with low conductivity impedes charge-transfer kinetics during electrochemical processes. Excessive nitrogen content leads to insufficient charge transfer, while bulk structures produce tortuous channels for mass transport. Some attempts have been made to address these issues by nanostructure engineering, such as ultrathin structure design, heterogeneous composition, defect engineering, and morphology control. These structure-engineered nanomaterials have been successfully applied in electrochemical fields, including ionic actuators, flexible supercapacitors, lithium-ion batteries, and electrochemical sensors. Herein, a timely review on the latest advances in graphitic carbon nitride through various engineering strategies for electrochemical applications has been summarized. A perspective on critical challenges and future research directions is highlighted for graphitic carbon nitride in electrochemistry on the basis of existing research works and our experimental experience.

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

γ-Ray-Assisted Synthesis of a Pt-Sn Bimetallic Composite Loaded on Graphene-Graphitic Carbon Nitride Hybrid: A Cocktail Electrocatalyst for the Methanol Oxidation Reaction

The composite of Pt with transition metals is viewed as the most promising anode material for direct methanol fuel cell (DMFC) applications. Besides the decrease in the Pt loading, these multimetallic structures help in circumventing CO poisoning issues associated with a Pt catalyst. Herein, we prepared and loaded Pt-Sn bimetallic nanoparticles on an electron-rich and stable substrate consisting of graphitic nitride (GCN) and graphene oxide (GO)/reduced graphene oxide (r-GO) hybrid composites. The γ-radiolysis method was employed for coreduction of metal salts to deposit the binary composite of metal nanoparticles over the substrates. These structures were tested as the anode material for the methanol oxidation reaction (MOR). Among various possible combinations, Pt-Sn-loaded rGO-GCN (Pt-Sn/rGO-GCN) demonstrated the current density of ca. 2.4 A/mg_Pt. To the best of our knowledge, this value is among the highest ones, reported for similar systems in the acidic pH. Furthermore, these composites demonstrated excellent stability in the repeated cycle test. The improved performance is associated to the plenty of -OH groups provided by the Sn counterpart and a large number of adsorption sites from the electron-reached GCN counterpart.

Synthesis of Novel Kaolin-Supported g-C3N4/CeO2 Composites with Enhanced Photocatalytic Removal of Ciprofloxacin

Herein, novel ternary kaolin/CeO₂/g-C₃N₄ composite was prepared by sol-gel method followed by hydrothermal treatment. The self-assembled 3D “sandwich” structure consisting of kaolin, CeO₂ and g-C₃N₄ nanosheets, was systematically characterized by appropriate techniques to assess its physicochemical properties. In the prerequisite of visible-light irradiation, the removal efficiency of ciprofloxacin (CIP) over the kaolin/CeO₂/g-C₃N₄ composite was about 90% within 150 min, 2-folds higher than those of pristine CeO₂ and g-C₃N₄. The enhanced photocatalytic activity was attributed to the improved photo-induced charge separation efficiency and the large specific surface area, which was determined by electrochemical measurements and N₂ physisorption methods, respectively. The synergistic effect between the kaolin and CeO₂/g-C₃N₄ heterostructure improved the photocatalytic performance of the final solid. The trapping and electron paramagnetic resonance (EPR) experiments demonstrated that the hole (h⁺) and superoxide radicals (•O₂⁻) played an important role in the photocatalytic process. The photocatalytic mechanism for CIP degradation was also proposed based on experimental results. The obtained results revealed that the kaolin/CeO₂/g-C₃N₄ composite is a promising solid catalyst for environmental remediation.

Sunlight assisted degradation of a pollutant dye in water by a WO3@g-C3N4 nanocomposite catalyst

A series of WO₃@g-C₃N₄ nanocomposites were prepared by following a facile, cost-effective chemical rote and characterized by different techniques. They are promising photocatalyst with high potential for solar light harvesting and environmental remediation.

Recent Development of Photocatalysts Containing Carbon Species: A Review

Undoubtedly, carbon-based (nano)composites can be promising photocatalysts with improved photocatalytic activity due to the coupling effect from the incorporation of carbon species. In this mini-review, we focus on the recent development of photocatalysts based on carbon-based (nano)composites. TiO2 is well-known as a typical photocatalyst. Special attention is paid to the various types of carbon–TiO2 composites such as C-doped TiO2, N–C-doped TiO2, metal–C-doped TiO2, and other co-doped C/TiO2 composites. Various synthetic strategies including the solvothermal/hydrothermal method, sol–gel method, and template-directed method are reviewed for the preparation of carbon-based TiO2 composites. C/graphitic carbon nitride (g-C3N4) composites and ternary C-doped composites are also summarized and ascribed to the unique electronic structure of g-C3N4 and the synergistic effect of the ternary interfaces, respectively. In the end, we put forward the future perspective of the photocatalysts containing carbon species based on our knowledge.

Highly enhanced visible-light photocatalytic NOx purification and conversion pathway on self-structurally modified g-C3N4 nanosheets

The unmodified graphitic carbon nitride (g-C₃N₄) suffers from low photocatalytic activity because of the unfavourable structure. In the present work, we reported a simple self-structural modification strategy to optimize the microstructure of g-C₃N₄ and obtained graphene-like g-C₃N₄ nanosheets with porous structure. In contrast to traditional thermal pyrolysis preparation of g-C₃N₄, the present thermal condensation was improved via pyrolysis of thiourea in an alumina crucible without a cover, followed by secondary heat treatment. The popcorn-like formation and layer-by-layer thermal exfoliation of graphene-like porous g-C₃N₄ was proposed to explain the formation mechanism. The photocatalytic removal performance of both NO and NO₂ with the graphene-like porous g-C₃N₄ for was significantly enhanced by self-structural modification. Trapping experiments and in-situ diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) measurement were conducted to detect the active species during photocatalysis and the conversion pathway of g-C₃N₄ photocatalysis for NO_x purification was revealed. The photocatalytic activity of graphene-like porous g-C₃N₄ was highly enhanced due to the improved charge separation and increased oxidation capacity of the O₂^- radicals and holes. This work could not only provide a novel self-structural modification for design of highly efficient photocatalysts, but also offer new insights into the mechanistic understanding of g-C₃N₄ photocatalysis.

Synthesis, Characterization, and Photocatalytic Properties of Bamboo Charcoal/TiO₂ Composites Using Four Sizes Powder

Visible-light-active bamboo biochar/TiO₂ composites were fabricated by the calcination method using C₁₆H₃₆O₄Ti as the titanium source and bamboo powder with different sizes as the carbon source. The TiO₂ nanoparticles were observed to disperse onto the surface of bamboo biochar fiber. The sizes of the bamboo powder played an important role in the microstructures and the properties of bamboo biochar/TiO₂ composites. The bamboo biochar/TiO₂ composites displayed the photocatalytic activities both under visible light irradiation and UV irradiation. The adsorption isotherms better fitted Freundlich isotherm models and the photodegradation reactions followed pseudo-first-order kinetics. Bamboo charcoal/TiO₂ composites exhibited high stability after up to four cycles. This research could pave the way for high-value applications of biomass in the environmental field.

An intelligent dual stimuli-responsive photosensitizer delivery system with O2-supplying for efficient photodynamic therapy

The effects of photodynamic therapy (PDT) are limited by the hypoxic tumor microenvironment (TME). In this paper, a new type of biocompatible multifunctional photosensitizer delivery system was fabricated to relieve tumor hypoxia and improve the efficacy of PDT. The photosensitizer hematoporphyrin monomethyl ether (HMME) and catalase (CAT) were encapsulated in the pores of mesoporous graphitic-phase carbon nitride nanosheets (mpg-C₃N₄). Next, hyaluronic (HA) was coated on the surface of the mpg-C₃N₄ via an amide linkage to construct the tumor-targeting HAase/CAT dual activatable and mpg-C₃N₄/HMME response photosensitizer delivery system (HA@mpg-C₃N₄-HMME/CAT). Upon intravenous injection, HA@mpg-C₃N₄-HMME/CAT shows high tumor accumulation owing to the tumor-targeting HA coating. Meanwhile, CAT within mpg-C₃N₄ could trigger decomposition of endogenic TME H₂O₂ to increase oxygen supply in-situ to relieve tumor hypoxia. This effect together with mpg-C₃N₄/HMME dual response is able to dramatically improve PDT efficiency. The hypoxia status of tumors was evaluated in vivo to demonstrate the success of the O₂-supplying. And the in vitro and in vivo results showed the excellent therapeutic effect of the HA@mpg-C₃N₄-HMME/CAT photosensitizer delivery system. O₂-supplying PDT may enable the enhancement of traditional PDT and future PDT design.

Improved visible light photocatalytic activity of rGO–Fe3O4–NiO hybrid nanocomposites synthesized byin situfacile method for industrial wastewater treatment applications

In situsurfactant free synthesis of rGO–Fe₃O₄–NiO hybrid nanocomposite for improving photocatalytic degradation of synthetic dyes (MR and CV) and real industrial dye wastewater.

Low-temperature fabrication of Bi25FeO40/rGO nanocomposites with efficient photocatalytic performance under visible light irradiation

Bismuth ferrite/reduced graphene oxide (Bi₂₅FeO₄₀/rGO) nanocomposites have been synthesized by a hydrothermal method, followed by a simple room temperature liquid phase process.

Synthesis of mesoporous SiO2/Cu2O–graphene nanocomposites and their highly efficient photocatalytic performance for dye pollutants

A mesoporous SiO₂/Cu₂O–graphene composite, a novel material, was successfully synthesized using a self-assembly method with tetraethyl orthosilicate (TEOS).

V. V, V. N. R, Mathew S. A quaternary TiO2/ZnO/RGO/Ag nanocomposite with enhanced visible light photocatalytic performance

Synthesis and photocatalytic application of a quaternary TiO₂/ZnO/RGO/Ag nanocomposite under visible light.

Graphene in Photocatalysis: A Review

In recent years, heterogeneous photocatalysis has received much research interest because of its powerful potential applications in tackling many important energy and environmental challenges at a global level in an economically sustainable manner. Due to their unique optical, electrical, and physicochemical properties, various 2D graphene nanosheets-supported semiconductor composite photocatalysts have been widely constructed and applied in different photocatalytic fields. In this review, fundamental mechanisms of heterogeneous photocatalysis, including thermodynamic and kinetics requirements, are first systematically summarized. Then, the photocatalysis-related properties of graphene and its derivatives, and design rules and synthesis methods of graphene-based composites are highlighted. Importantly, different design strategies, including doping and sensitization of semiconductors by graphene, improving electrical conductivity of graphene, increasing eloectrocatalytic active sites on graphene, strengthening interface coupling between semiconductors and graphene, fabricating micro/nano architectures, constructing multi-junction nanocomposites, enhancing photostability of semiconductors, and utilizing the synergistic effect of various modification strategies, are thoroughly summarized. The important applications including photocatalytic pollutant degradation, H₂ production, and CO₂ reduction are also addressed. Through reviewing the significant advances on this topic, it may provide new opportunities for designing highly efficient 2D graphene-based photocatalysts for various applications in photocatalysis and other fields, such as solar cells, thermal catalysis, separation, and purification.

Monolayer g-C3N4 Fluorescent Sensor for Sensitive and Selective Colorimetric Detection of Silver ion from Aqueous Samples

Rapid and sensitive detection of heavy-metal ions in natural water environments worldwide is urgently needed because of their severe threats to human health. In the present work, monolayer graphite-like flake C3N4 (g-C3N4) materials were applied as a new fluorescent sensor for the detection of trace silver ion in aqueous solution. The thickness of synthesized g-C3N4 was 0.45 nm and obtained by exfoliating twice with ultrasonic. With the presence of ethylene diamine tetraacetic acid as a screening agent, the highly sensitive sensor reached a low detection limit of 52.3 nmol/L for silver (I) ion and there was no disturbance when silver (I) ion coexisted with other metal ions in water samples. Under the optimal conditions, the monolayer g-C3N4 was successfully used to detect trace silver (I) ion in different environmental water and drinking water samples.

An overview of the modification of g-C3N4 with high carbon containing materials for photocatalytic applications

This review highlights the recent trends in modifying g-C₃N₄ with high carbon containing materials for H₂ production and pollutant degradation.

Isotype heterostructure of bulk and nanosheets of graphitic carbon nitride for efficient visible light photodegradation of methylene blue

Isotype heterostructure of bulk and nanosheets of graphitic carbon nitride with effective band gap of 2.62 eV and charge carrier mean lifetime of 21 ns exhibits an efficient visible light photocatalysis.

Efficient visible-light photocatalytic oxidation of gaseous NO with graphitic carbon nitride (g-C3N4) activated by the alkaline hydrothermal treatment and mechanism analysis

In this paper, an enhanced visible-light photocatalytic oxidation (PCO) of NO (∼ 400 ppm) in the presence of the graphitic carbon nitride (g-C3N4) treated by the alkaline hydrothermal treatment is evaluated. Various g-C3N4 samples were treated in different concentrations of NaOH solutions and the sample treated in 0.12 mol L(-1) of NaOH solution possesses the largest BET specific surface area as well as the optimal ability of the PCO of NO. UV-vis diffuse reflection spectra (DRS) and photoluminescence (PL) spectra were also conducted, and the highly improved photocatalytic performance is ascribed to the large specific surface area and high pore volume, which provides more adsorption and active sites, the wide visible-light adsorption edge and the narrow band gap, which is favorable for visible-light activation, as well as the decreased recombination rate of photo-generated electrons and holes, which could contribute to the production of active species. Fluorescence spectra and a trapping experiment were conducted to further the mechanism analysis of the PCO of NO, illustrating that superoxide radicals (O2(-)) play the dominant role among active species in the PCO of NO.

Nanocomposites of AgInZnS and graphene nanosheets as efficient photocatalysts for hydrogen evolution

In this study, AgInZnS-reduced graphene (AIZS-rGO) nanocomposites with tunable band gap absorption and large specific surface area were synthesized by a simple hydrothermal route, which showed highly efficient photocatalytic hydrogen evolution under visible-light irradiation. The relationships between their crystal structures, morphology, surface chemical states and photocatalytic activity have been explored in detail. Importantly, the AIZS-rGO nanocomposites with 0.02 wt% of graphene exhibited the highest hydrogen production rate of 1.871 mmol h(-1) g(-1), which was nearly 2 times the hydrogen production rate when using pure AIZS nanoparticles as the photocatalyst. This high photocatalytic H2-production activity was attributed predominantly to the incorporation of graphene sheets, which demonstrated an obvious influence on the structure and optical properties of the AIZS nanoparticles. In the AIZS-rGO nanocomposites, graphene could not only serve as an effective supporting layer but also is a recombination center for conduction band electrons and valence band holes. It is believed that this kind of graphene-based material would attract much attention as a promising photocatalyst with a high efficiency and a low cost for photocatalytic H2 evolution and facilitates their application in the environmental protection field.

New insights into how RGO influences the photocatalytic performance of BiOIO3/RGO nanocomposites under visible and UV irradiation

Reduced graphene oxide (RGO) has been demonstrated to be effective in enhancing the photocatalytic activity of various semiconductors. However, an important issue that has been overlooked is the role of RGO in UV-induced photocatalysis of RGO-based nanocomposites. In the present work, novel BiOIO3/RGO nanocomposites were prepared by a simple one-pot hydrothermal method, during which BiOIO3 nanoplates were formed in situ on RGO sheets resulting from partial reduction of RGO. The two components of the composite displayed intimate interfacial contact. The as-prepared BiOIO3/RGO nanocomposites exhibited highly enhanced visible photocatalytic activity, relative to that of pure BiOIO3, toward removal of NO from air. However, the BiOIO3/RGO nanocomposites showed only slightly increased photocatalytic activity, relative to pure, under UV irradiation. The limited enhancement of UV activity can be ascribed to the fact that BiOIO3 would be expected to compete with RGO with regard to absorption and utilization of UV light. Evidence shows that RGO can act as a semiconductor rather than a photosensitizer or electron reservoir in BiOIO3/RGO nano-composites. In addition, the active species responsible for photoactivity have been investigated by a DMPO spin-trapping electron spin resonance technique. Photo-generated holes were found to be the main active species inducing the photo-oxidation of NO under visible light, whereas holes and OH radicals are considered to be responsible for photo-activity under UV light. This work points to BiOIO3/RGO nano-composites as new and efficient visible light photocatalysts for environmental remediation applications, and also as a source of new insights into the pivotal role of RGO in photocatalysis of RGO-based nanocomposites under visible as well as UV light.