Enhanced removal of trace Cr(VI) from neutral and alkaline aqueous solution by FeCo bimetallic nanoparticles

Removal and reduction mechanism of Cr (VI) in Leersia hexandra Swartz constructed wetland-microbial fuel cell coupling system

Cr (VI) is extremely harmful to both the environment and human health, and it can linger in the environment for a very long period. In this research, the Leersia hexandra Swartz constructed wetland-microbial fuel cell (CW-MFC) system was constructed to purify Cr (VI) wastewater. By comparing with the constructed wetland (CW) system, the system electricity generation, pollutants removal, Cr enrichment, and morphological transformation of the system were discussed. The results demonstrated that the L. hexandra CW-MFC system promoted removal of pollutants and production of electricity of the system. The maximum voltage of the system was 499 mV, the COD and Cr (VI) removal efficiency was 93.73% and 97.00%. At the same time, it enhanced the substrate and L. hexandra ability to absorb Cr and change it morphologically transformation. Additionally, the results of XPS and XANES showed that the majority of the Cr in the L. hexandra and substrate was present as Cr (III). In the L. hexandra CW-MFC system, Geobacter also functioned as the primary metal catabolic reducing and electrogenic bacteria. As a result, L. hexandra CW-MFC system possesses the added benefit of removing Cr (VI) while producing energy compared to the traditional CW system.

Cobalt/Iron Bimetallic Biochar Composites for Lead(II) Adsorption: Mechanism and Remediation Performance

The performance of nano-zero-valent iron for heavy metal remediation can be enhanced via incorporation into bimetallic carbon composites. However, few economical and green approaches are available for preparing bimetallic composite materials. In this study, novel Co/Fe bimetallic biochar composites (BC@Co/Fe-X, where X = 5 or 10 represents the CoCl2 concentration of 0.05 or 0.1 mol L-1) were prepared for the adsorption of Pb2+. The effect of the concentration of cross-linked metal ions on Pb2+ adsorption was investigated, with the composite prepared using 0.05 mol L-1 Co2+ (BC@Co/Fe-5) exhibiting the highest adsorption performance. Various factors, including the adsorption period, Pb2+ concentration, and pH, affected the adsorption of Pb2+ by BC@Co/Fe-5. Further characterisation of BC@Co/Fe-5 before and after Pb2+ adsorption using methods such as X-ray diffraction and X-ray photoelectron spectroscopy suggested that the Pb2+ adsorption mechanism involved (i) Pb2+ reduction to Pb0 by Co/Fe, (ii) Co/Fe corrosion to generate Fe2+ and fix Pb2+ in the form of PbO, and (iii) Pb2+ adsorption by Co/Fe biochar. Notably, BC@Co/Fe-5 exhibited excellent remediation performance in simulated Pb2+-contaminated water and soil with good recyclability.

Ultrasonic-assisted preparation of interlaced layered hydrotalcite (U-Fe/Al-LDH) for high-efficiency removal of Cr(VI): Enhancing adsorption-coupled reduction capacity and stability

Cr(VI) contamination in aquatic systems has been a challenge for environmental science researchers. To environmental-friendly, stable, and efficiently remove Cr (VI), a novel layered double hydroxide was prepared through the ultrasonic-assisted co-precipitation method. The ultrasonic-assisted step prevented the Fe²⁺ oxidation, improved the morphology and performance, and finally, the adsorption-coupled reduction capacity and stability were enhanced. By adding U-Fe/Al-LDH (1.0 g/L) for Cr(VI) (100 mg/L), the removal rate reached 82.24%. The removal data were well fitted by the pseudo-second-order kinetic and Langmuir isotherm model. Using U-Fe/Al-LDH can be performed over a wide pH range (2-10), with a theoretical maximum removal capacity of 118.65 mg/g. The Cr(VI) with high toxicity was adsorbed and reduced to low-toxicity Cr(III). In the final phase, stable Cr(III) complex precipitates were generated. After 30 days, the dynamic leaching amounts of total Cr in used U-Fe/Al-LDH-2 were 0.1052 mg/L. Combined with the results of the influence experiment of coexisting anions and oxidants and the SO₄^2- release experiment, the stability of the removal effect and the safety of U-Fe/Al-LDH were proved. In conclusion, U-Fe/Al-LDH-2 is a promising remediation agent and a feasible Cr(VI) removal method for the practical remediation.

Immobilization of chromium enhanced by arbuscular mycorrhizal fungi in semi-aquatic habitats with biochar addition

Arbuscular mycorrhizal fungi (AMF) exhibit great potential in heavy-metal immobilization in semi-aquatic habitats. Under high heavy-metal stress, however, the role of AMF is limited, and the detoxification mechanism of AMF in heavy metals' stabilization remains unclear. This study investigated the effects of AMF on a wetland plant (Iris pseudacorus) and chromium (Cr) immobilization at different water depths in semi-aquatic habitats with biochar addition. Results showed that AMF increased the physiological and photosynthetic functions in I. pseudacorus under Cr exposures. Besides, AMF alleviated the accumulation of reactive oxygen species and lipid peroxidation by enhancing the antioxidant enzyme activities. AMF and biochar significantly decreased Cr concentrations in outlet water and increased Cr accumulation in I. pseudacorus. Besides, biochar also vastly improved Cr accumulation in the substrate under the fluctuating water depth. AMF reduced Cr bioavailability in the substrate, with Cr (Ⅵ) concentrations and acid-soluble forms of Cr decreased by 0.3-64.5% and 19.0-40.8%, respectively. Micro-proton-induced X-ray emission was used to determine element localization and revealed that AMF improved the nutrients uptake by wetland plants and inhibited Cr translocation from roots to shoots. Overall, this study demonstrated that the interaction between AMF and biochar could significantly enhance the immobilization of high Cr concentrations in semi-aquatic habitats.

Atomic Hydrogen in Electrocatalytic Systems: Generation, Identification, and Environmental Applications

Electrochemical reduction has emerged as a viable technology for the removal of a variety of organic contaminants from water. Atomic hydrogen (H*) is the primary species generated in electrochemical reduction processes. In this work, identification and quantification for H* are reviewed with a focus on methods used to generate H* at different positions. Additionally, we present recently developed proposals for the surface chemistry mechanisms of H* on the most commonly used cathodes as well as the use of H* in standard electrochemical reactors. The proposed reaction pathways in different H* systems for environmental applications are also discussed in detail. As shown in this review, the key hurdles facing H* reduction technologies are related to i) the establishment of systematic and practical synthetic methods; ii) the development of effective identification approaches with high specificity; and, iii) an in-depth exploration of the H* reaction mechanism to better understand the reaction process of H*.

Magnetic MnFe2O4/ZnFe-LDH for Enhanced Phosphate and Cr (VI) Removal from Water

Due to the layered structure and recycling characteristics, magnetic MnFe2O4/ZnFe-LDH was prepared by co-precipitation. In this study, we intensively explored MnFe2O4/ZnFe-LDH for water purification compared with the ZnFe-LDH. The morphological and structural characteristics of the obtained products were systematically characterized. MnFe2O4/ZnFe-LDH exhibits the maximum adsorption capacity of 94.52 mg/g for phosphate and 49.03 mg/g for Cr (VI), respectively, which is superior to that of the ZnFe-LDH, indicating that the magnetic MnFe2O4 effectively enhanced adsorption performance. Meanwhile, the mechanism of adsorption of phosphate and Cr (VI) was briefly studied, where the metal center ion in MnFe2O4/ZnFe-LDH and between layers of SO42- serves as capture sites for phosphate and Cr (VI) removal. Furthermore, the MnFe2O4/ZnFe-LDH can be used for magnetic recycled and still maintained excellent removal efficiency (70%) for phosphate and Cr (VI) after five adsorption-desorption cycles. This work could open a new vista of designing magnetic novel adsorbents in environmental remediation.

Improved performance and applicability of copper-iron bimetal by sulfidation for Cr(VI) removal

The reactivity of zero-valent iron (ZVI) for the Cr(VI) removal in groundwater is mainly limited by the formation of a passivation layer during its application in permeable reactive barrier (PRB). A kind of sulfidated copper-iron bimetal (S-ZVICu) with high reactivity for Cr(VI) removal was prepared by depositing FeS_x onto copper modified ZVI via a one-pot method. The surface characteristic, reactivity and Cr(VI) removal performance of S-ZVICu were investigated. It was found that S-ZVICu had a Cr(VI) removal capacity as high as 67.5 mg/g and little risk of secondary contaminant of Cu(II). The optimal Cu/Fe mass ratio and S/Fe molar ratio were 0.0125 and 0.084, respectively. The S-ZVICu exhibited great superiority of Cr(VI) removal compared with ZVI, sulfidated ZVI (SZVI) and coper-iron bimetal (ZVICu). Mineralogy and morphology analysis showed that S-ZVICu had a hierarchical structure of Fe⁰/Cu⁰/FeS_x, which could effectively reduce the risk of secondary contaminant of copper ions. The mechanism analysis suggested that the copper and FeS_x successively plated on the surface of ZVI played a dual role in promoting the corrosion of zero-valent iron, and was facilitated to electron transfer between Fe⁰, Cu⁰, FeS_x and Cr(VI). In addition, the loose FeS_x layer had a positive effect on alleviating the oxidation of ZVI in air, which was helpful in maintaining the reactivity of S-ZVICu in the air. S-ZVICu is an environmentally friendly material for sustainable and effective removal of Cr(VI) in groundwater.

Enhanced removal of antibiotic resistance genes by nanoscale iron-cobalt particles modified with Ginkgo biloba L. leaf: Combining Illumina MiSeq sequencing and oligotyping analysis

The addition of second metal (Co) to nanoscale iron particles (NIPs) is an attractive strategy to improve catalytic capacity. However, the nanoparticles tend to form chain-like aggregates. In this study, bacterial 16S rRNA gene, antibiotic resistance genes (ARGs) and mobile genetic elements (MGEs) from secondary effluent were significantly removed by Ginkgo biloba L. modified nanoscale iron-cobalt particles (GNICPs). When the Co loading, initial pH value, DO and dosage were 10%, 7.33, 8.94 mg/L and 1.12 g/L, some ARGs and MGEs could be reduced below the detection limit at the 2nd or 3rd cycle. Illumina MiSeq sequencing demonstrated that negative correlations were found between ARGs and reaction time/cycles. The predicted microbial functions by FAPROTAX database indicated GNICPs were effective in eliminating human_pathogens_all. Furthermore, oligotyping revealed all ARGs and MGEs were positively correlated with oligotype 10, which indicated GNICPs removed oligotype 10 easily.

Polyethylene glycol-stabilized bimetallic nickel–zero valent iron nanoparticles for efficient removal of Cr(vi)

In order to solve the agglomeration of nanoscale zero-valent iron (nZVI) and improve its performance in pollutant treatment, polyethylene glycol-stabilized nickel modified nZVI (Ni/Fe–PEG) was synthesized by a liquid-phase reduction method and used to treat Cr(vi) solution for the first time.

Removal of Cr(VI) from wastewater by artificial zeolite spheres loaded with nano Fe-Al bimetallic oxide in constructed wetland

In order to solve the problems of poor adsorption capacity and low stability in treating heavy metal wastewater with traditional constructed wetland (CW) fillers, a new type of filler, artificial zeolite spheres loaded with nano Fe-Al bimetallic oxide (hereinafter referred to as composite zeolite spheres), was prepared for Cr(VI) removal from wastewater. The results indicated that nano Fe-Al bimetallic oxide was an effective material for Cr(VI) removal with the maximal removal efficiency of 84.9% at initial Cr(VI) concentration of 20 mg/L (pH = 3). The micro-reactor experiment further verified that composite zeolite spheres had better removal performance on Cr(VI) than traditional filler. Fourier-transform infrared (FT-IR), X-ray diffractometry (XRD) and X-Ray photoemission spectroscopy (XPS) results demonstrated that -OH groups reduced Cr(VI) to Cr(III), and then the Cr(III) was removed by forming Cr_xFe_1-x(OH)₃ precipitation with Fe(III) or formed Cr(OH)₃ precipitation with Al-OH through the ion exchange. This study provided an effective approach for treating Cr(VI) wastewater by using a new composite zeolite in constructed wetlands (CWs).

Cellulose-based adsorbents loaded with zero-valent iron for removal of metal ions from contaminated water

Sawdust loaded with zero-valent iron (S-ZVI) was prepared using a liquid phase reduction method for removing heavy metal ions from contaminated water. Surface chemistry and morphology of adsorbents were characterized with Fourier transform infrared (FT-IR) spectrometry, X-ray diffraction (XRD), scanning electron microscopy (SEM), SEM-mapping, EDX, and X-ray photoelectron spectrum (XPS). The results demonstrated that the zero-valent iron was successfully loaded onto the sawdust. The impact of various factors such as pH, initial metal ion concentration, temperature, and contact time on the removal capability of the adsorbents was systematically investigated. The equilibrium adsorption data showed that the adsorption of arsenic ions and Cr(III) followed the Langmuir model well, and the maximum adsorption reached 111.37 and 268.7 mg/g in an aqueous solution system. In addition, the adsorption kinetics was more accurately described by the pseudo-second-order model, suggesting the domination of chemical adsorption. Meanwhile, the results on recyclability indicated that the high performance of S-ZVI on the removal of arsenic ions was well maintained after three regeneration cycles. The adsorption mechanism revealed in this work suggested that S-ZVI improved the dispersion of ZVI by minimizing the agglomeration, thus leading to highly effective adsorption via chelation, electrostatic interaction, and redox reaction.

Remediation of heavy metals polluted environment using Fe-based nanoparticles: Mechanisms, influencing factors, and environmental implications

Environmental pollution by heavy metals (HMs) has raised considerable attention due to their toxic impacts on plants, animals and human beings. Thus, the environmental cleanup of these toxic (HMs) is extremely urgent both from the environmental and biological point of view. To remediate HMs-polluted environment, several nanoparticles (NPs) such as metals and its oxides, carbon materials, zeolites, and bimetallic NPs have been documented. Among these, Fe-based NPs have emerged as an effective choice for remediating environmental contamination, due to infinite size, high reactivity, and adsorption properties. This review summarizes the utilization of various Fe-based NPs such as nano zero-valent iron (NZVI), modified-NZVI, supported-NZVI, doped-NZVI, and Fe oxides and hydroxides in remediating the HMs-polluted environment. It presents a comprehensive elaboration on the possible reaction mechanisms between the Fe-based NPs and heavy metals, including adsorption, oxidation/reduction, and precipitation. Subsequently, the environmental factors (e.g., pH, organic matter, and redox) affecting the reactivity of the Fe-based NPs with heavy metals are also highlighted in the current study. Research shows that Fe-based NPs can be toxic to living organisms. In this context, this review points out the environmental hazards associated with the application of Fe-based NPs and proposes future recommendations for the utilization of these NPs.

Effect of pH, temperature and co-existing anions on the Removal of Cr(VI) in groundwater by green synthesized nZVI/Ni

Nanoscale zero-valent iron/nickel (GT-nZVI/Ni) was prepared by green synthesis technology using green tea extracts in this study. The obtained material was characterized by Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and BET analyses. Batch experiments were carried out to investigate the effect of pH, initial concentration of Cr(VI), temperature and co-existing anions(CO₃^2-, HCO₃^-, SO₄^2- and NO₃^-) on the removal efficiency of Cr(VI) in groundwater. Results showed that 100% Cr(VI) was removed from the aqueous solution containing 5 mg L^-1 of Cr(VI) in 30 min when pH value was 5 and reaction temperature was 303 K. Temperature and pH value had a significant effect of reduction rate of Cr(VI). The presence of co-existing anions (CO₃^2-, HCO₃^-, SO₄^2- and NO₃^-) inhibited the removal of Cr(VI) by GT-nZVI/Ni and the most significant one was CO₃^2-, the removal efficiency of Cr(VI) decreased to 52.9% when the concentration of CO₃^2- was 10 mmol L^-1. The adsorption behavior of Cr(VI) fitted better with Langmuir-Hinshelwood first order reaction kinetic model. Thermodynamic studies indicated the process was spontaneous and endothermic(ΔG°<0, ΔS°>0, ΔH°>0). Therefore, this study provides a reference for further research of GT-nZVI/Ni and practical application of GT-nZVI/Ni in groundwater treatment.

Enhanced Catalytic Dechlorination of 1,2-Dichlorobenzene Using Ni/Pd Bimetallic Nanoparticles Prepared by a Pulsed Laser Ablation in Liquid

Bimetallic nanoparticles (NPs) exhibit advantageous electrical, optical, and catalytic properties. Among the various NP synthesis methods, pulsed laser ablation in liquid (PLAL) is currently attracting much attention because of its simplicity and versatility. In this study, a pulsed laser was used to produce nickel/palladium (Ni/Pd) bimetallic NPs in methanol and deionized water. The morphological and optical properties of the resulting Ni/Pd bimetallic NPs were characterized. The synthesized Ni/Pd bimetallic NPs were used for the dechlorination of 1,2-dichlorobenzene (1,2-DCB) under various conditions. The dechlorination rates of 1,2-DCB while using single (Ni and Pd) and bimetallic (Ni powder/Pd and Ni/Pd) NPs were investigated. The results showed that the Ni/Pd bimetallic NPs with 19.16 wt.% Pd exhibited much enhanced degradation efficiency for 1,2-DCB (100% degradation after 30 min). Accordingly, the results of enhanced the degradation of 1,2-DCB provide plausible mechanism insights into the catalytic reaction.

FeCo nanoparticles-embedded carbon nanofibers as robust peroxidase mimics for sensitive colorimetric detection of l-cysteine

A simple and low cost detection of l-cysteine is essential in the fields of biosensors and medical diagnosis. In this study, we have developed a simple electrospinning, followed by calcination process to prepare FeCo nanoparticles embedded in carbon nanofibers (FeCo-CNFs) as an efficient peroxidase-like mimic for the detection of l-cysteine. FeCo nanoparticles are uniformly dispersed within CNFs, and their diameters are highly influenced by the calcination temperature. The calcination temperature also influences the peroxidase-like catalytic activity, and the maximum activity is achieved at a calcination temperature of 550 °C. Owing to the high catalytic activity of the as-prepared FeCo-CNFs, a colorimetric technique for the rapid and accurate determination of l-cysteine has been developed. The detection limit is about 0.15 μM with a wide linear range from 1 to 20 μM. In addition, a high selectivity for the detection of l-cysteine over other amino acids, glucose and common ions is achieved. This study provides a simple, rapid and sensitive sensing platform for the detection of l-cysteine, which is a promising candidate for potential applications in biosensing, medicine, environmental monitoring.

The first morphologically controlled synthesis of a nanocomposite of graphene oxide with cobalt tin oxide nanoparticles

In the present research, the degradation and decolorization of Reactive Black 5 synthetic dye at 30 ppm concentration under sun irradiation in the presence of a newly synthesized graphene based cobalt tin oxide nanocomposite were investigated. These nanoparticles were synthesized by a simple hydrothermal approach using precursor chloride salt i.e., stannous chloride and cobalt chloride and then adsorbed on the surface of RGO by a solvothermal process by changing the condition. The newly synthesized product was subjected to various instrumentation to study the morphology and other properties. X-ray powder diffraction analysis (XRD) explained the structural composition and various parameters of the product, which were further verified by Vesta software. The surface morphology of the product was analyzed by scanning electron microscopy (SEM) and it was observed that the size of each cube was approximately 5–10 μm from every face of the cube. Transmission electron microscopy (TEM) explained that the nanoparticles were within the range of 100–250 nm. These synthesized nanocubes were used in one more application, which was the investigation of the fuel efficiency in the presence of different concentrations of newly synthesized nanocomposites as a catalyst. The efficiency of kerosene oil was investigated by studying different parameters: the flash point, fire point, specific gravity, cloud point, pour point, and calorific value at increasing dosages of catalyst (0, 30, 60 and 90 ppm). It was observed that the values of these parameters changed significantly by changing the concentration of the catalyst dosage. The effect of the nanoparticles on the degradation of the RB 5 azo dye showed the highest removal percentage at the largest value of catalyst dosage, which was 0.70 mg ml⁻¹ with the highest value of 3 ml of hydrogen peroxide.

Tin cobalt hydroxide nanoparticles were synthesized by a simple hydrothermal technique. A graphene based cobalt tin oxide nanocomposite was synthesized by a solvothermal method.

Effective Removal of Chromium(III) from Low Concentration Aqueous Solution Using a Novel Diazene/Methoxy-Laced Coordination Polymer

In this study, a novel coordination polymer [CdL₂(H₂O)0.5]n (1), [HL = 4-(2-(4-((pyridin-3-yl)methoxy)phenyl)diazenyl)benzoic acid] was fabricated via an in situ ligand transformation reaction under solvothermal conditions. The as-prepared polymer exhibited a selectivity and efficiency for Cr(III) removal with a high uptake capacity of 106.13 mg·g-1. Interestingly, even in the low concentration (0.02⁻0.20 ppm), it still performs a relatively high efficiency (≥ 92.5%) towards the removal of Cr(III) in aqueous solution. Remarkably, it also presents good selectivity and high efficiency (93.3%) for Cr(III) removal in the presences of interfering metal ions. The good removal performance for Cr(III) was demonstrated to be a structure-dependent chemical process between polymer and Cr(III) involving the diazene and methoxy groups in polymer 1, which happened not only on the surfaces of the adsorbent but also in the pores of polymer, giving rise to a strong affinity toward Cr(III) adsorption. The possible adsorption mechanism of Cr(III) was proposed and systematically verified by FT-IR, scanning electron microscope (SEM), atomic force microscope (AFM) and energy dispersive spectrometer (EDS) measurements.

Three-dimensional honeycomb-like structured zero-valent iron/chitosan composite foams for effective removal of inorganic arsenic in water

A facile freeze-drying method was presented to fabricate three dimensional (3D) honeycomb-like structured nanoscale zero-valent iron/chitosan composite foams (ICCFs) for effective removal of inorganic arsenic in water. It was found that freezing temperature has important influence on the formation of 3D network structure of ICCFs. The ICCFs obtained at freeze temperature of -80°C exhibits oriented porous structure with good mechanical property than that at -20°C, thus improved excellent removal capability of As(III) and As(V) up to 114.9mgg(-1) and 86.87mgg(-1), respectively. Further, the adsorption kinetics of ICCFs on As(III) and As(V) can be described by pseudo-second order model and their adsorption isotherms follow Langmuir adsorption model. The superior removal performance of ICCFs on As(III) and As(V) can be ascribed to its oriented porous structure with abundant adsorption active sites resulted from nZVI and O, N-containing functional groups in ICCFs. Importantly, it was found that the O, N-containing functional groups of chitosan in ICCFs can adequately bind with the dissolved Fe(3+) ions from oxidation of nZVI to form Fe(3+)-Chitosan complex during removal of As(III) and As(V), thus effectively avoiding the dissolved Fe(3+) ions into solution to produce secondary pollution. A possible adsorption-coupled reduction mechanism of ICCFs on As(III) and As(V) was also proposed based on the experimental results. We believe that this work would be helpful to develop low-cost and abundant chitosan-based materials as high performance adsorbents for environmental remediation applications.