Chlorine-doped reduced graphene oxide nanosheets as an efficient and stable electrode for supercapacitor in acidic medium

Salt-Induced Doping and Templating of Laser-Induced Graphene Supercapacitors

The use of inexpensive and widely available CO₂ lasers to selectively irradiate polymer films and form a graphene foam, termed laser-induced graphene (LIG), has incited significant research attention. The simple and rapid nature of the approach and the high conductivity and porosity of LIG have motivated its widespread application in electrochemical energy storage devices such as batteries and supercapacitors. However, nearly all high-performance LIG-based supercapacitors reported to date are prepared from costly, petroleum-based polyimide (Kapton, PI). Herein, we demonstrate that incorporating microparticles of inexpensive, non-toxic, and widely abundant sodium salts such as NaCl and Na₂SO₄ into poly(furfuryl alcohol) (PFA) resins enables the formation of high-performance LIG. The embedded particles aid in carbonization and act as a template for pore formation. While increasing both the carbon yield and surface area of the electrodes, the salt also dopes the LIG formed with S or Cl. The combination of these effects results in a two- to four-order-of-magnitude increase in device areal capacitance, from 8 μF/cm² for PFA/no salt at 5 mV/s to up to 80 mF/cm² for some PFA/20% Na₂SO₄ samples at 0.05 mA/cm², significantly higher than that of PI-based devices and most other LIG precursors.

Production of chlorine-containing functional group doped graphene powders using Yucel's method as anode materials for Li-ion batteries

In this study, the one-step electrochemical preparation of chlorine doped and chlorine-oxygen containing functional group doped graphene-based powders was carried out by Yucel's method, with the resultant materials used as anode materials for lithium (Li)-ion batteries. Cl atoms and ClO x (x = 2, 3 or 4) groups, confirmed by X-ray photoelectron spectroscopy analysis, were covalently doped into the graphene powder network to increase the defect density in the graphene framework and improve the electrochemical performance of Li-ion batteries. The microscopic properties of the Cl-doped graphene powder were investigated by scanning electron microscopy and transmission electron microscopy (TEM) analyses. TEM analysis showed that the one-layer thickness of the graphene was approximately 0.33 nm. Raman spectroscopy analysis was carried out to determine the defect density of the graphene structures. The G peak obtained in the Raman spectra is related to the formation of sp2 hybridized carbons in the graphene-based powders. The 2D peak seen in the spectra shows that the synthesized graphene-based powders have optically transparent structures. In addition, the number of sp2 hybridized carbon rings was calculated to be 22, 19, and 38 for the Cl-GP1, Cl-GP2, and Cl-GOP samples, respectively. As a result of the charge/discharge tests of the electrodes as anodes in Li-ion batteries, Cl-GP2 exhibits the best electrochemical performance of 493 mA h g-1 at a charge/discharge current density of 50 mA g-1.

Pyrolysis of Porous Organic Polymers under a Chlorine Atmosphere to Produce Heteroatom-Doped Microporous Carbons

Three types of cross-linked porous organic polymers (either oxygen-, nitrogen-, or sulfur-doped) were carbonized under a chlorine atmosphere to obtain chars in the form of microporous heteroatom-doped carbons. The studied organic polymers constitute thermosetting resins obtained via sol-gel polycondensation of resorcinol and five-membered heterocyclic aldehydes (either furan, pyrrole, or thiophene). Carbonization under highly oxidative chlorine (concentrated and diluted Cl2 atmosphere) was compared with pyrolysis under an inert helium atmosphere. All pyrolyzed samples were additionally annealed under NH3. The influence of pyrolysis and additional annealing conditions on the carbon materials' porosity and chemical composition was elucidated.

High-voltage and long-lasting aqueous chlorine-ion battery by virtue of "water-in-salt" electrolyte

Chloride-ion battery (CIB) is regarded as a promising electrochemical storage device due to their high theoretical volumetric capacities, low cost, and high abundance. However, low-cycle life limits its application in the energy storage field. Herein, we report a rechargeable CIB composed of a "water-in-salt" electrolyte, a zinc anode, and a carbon cathode (graphene, carbon nanotubes, carbon black). These cathodes exhibit initial reversible specific capacities of 136, 108, and 102 mAh g-1, respectively. Especially, a reversible discharge capacity of 95 mAh g-1 was retained after 2000 cycles when graphene is used as the cathode. Such high cycling stability was first reported in CIBs. Furthermore, the use of "water-in-salt" electrolytes has improved the discharge platform of aqueous CIBs to 2.6V. The charge and discharge mechanism of the carbon cathode was investigated by TEM, FTIR, Raman, and XPS, proving the chloride ions reversible absorption/desorption in carbon cathodes.

Design of organic/inorganic nanocomposites for ultrasensitive electrochemical detection of a cancer biomarker protein

A new type of nanocomposite composed of carboxylated single-walled carbon nanotubes (CNTs-COOH), reduced graphene oxide (rGO), bovine serum albumin-Ag hybride (Ag@BSA), and poly(3,4-ethylenedioxythiophene) (PEDOT) was fabricated to develop an ultrasensitive electrochemical platform for the detection of carcinoembryonic antigen (CEA) as a model of biomarkers. Two steps are involved for the fabrication of the organic/inorganic nanocomposites. The Ag@BSA nanoflowers were first synthesized to be doped with CNTs-COOH and rGO followed by the adsorption of PEDOT resulting in CNTs-COOH/rGO/Ag@BSA/PEDOT. The as-prepared nanocomposites were then deposited onto an Au electrode together with subsequent immobilization of CEA antibody (anti-CEA) to construct the electrochemical immunosensor. This unique structure and composition of the developed immunosensor can expect an excellent electrochemical response. The immunosensor offers a linear relationship between the electrochemical responses and the CEA concentrations from 0.002 to 50 ng∙mL^-1 with a detection limit of 1 × 10^-4 ng∙mL^-1. Moreover, the ultrasensitive immunoassay can detect CEA in real human serum samples, and the results are comparable to those obtained from the commercial ELISA. Therefore, this strategy can monitor diseases, offer clinical diagnosis, and may be valuable for the development of new biomedical devices.

An ionic liquid-modified reduced graphene oxide electrode material with favourable electrochemical properties

The supercapacitor assembled by a RGO–IL material showed an outstanding energy density (50.19 W h kg⁻¹) and could light an LED for 30 s.

Thermally reduced fluorographenes as efficient electrode materials for supercapacitors

There is an urgent need for a simple and up-scalable method for the preparation of supercapacitor electrode materials due to increasing global energy consumption worldwide. We have discovered that fluorographene exhibits great potential for the development of new kinds of supercapacitors aimed at practical applications. We have shown that time control of isothermal reduction of fluorographite at 450 °C under a hydrogen atmosphere led to the fine-tuning of fluorine content and electronic properties of the resulting fluorographene derivatives. Charge transfer resistances (R_ct) of the thermally reduced fluorographenes (TRFGs) were decreased with respect to the pristine fluorographene; however, the R_ctvs. time-of-reduction plot showed a v-shaped profile. The specific capacitance vs. time-of-reduction of TRFG followed the v-shaped trend, which could be the result of the decreasing content of sp³ carbons and increasing content of structural defects. An optimized material exhibited values of specific capacitance up to 539 F g^-1 recorded at a current density of 0.25 A g^-1 and excellent cycling durability with 100% specific capacitance retention after 1500 cycles in a three-electrode configuration and 96.7% of specific capacitance after 30 000 cycles in a two-electrode setup.

Polymer-Based Synthetic Routes to Carbon-Based Metal-Free Catalysts

Carbons are increasingly important as possible alternatives to expensive metal catalysts owing to the wide range of chemical properties they can exhibit and the growing set of synthetic routes available to produce them. This progress report discusses the process of making catalytic carbons from polymeric precursors, focusing on mechanisms of carbonization and how the polymer structures and synthetic procedures affect the resulting carbons. In considering what is necessary to move laboratory catalytic carbons to industrial and commercial applications, the cost and complexity to produce them are a considerable challenge to overcome. Industrially produced carbons are typically made from biopolymers such as lignin while many of the catalytic carbons studied in literature are from synthetic polymers. Thus, studying polymer-derived carbons can provide insights into the carbonization process and the properties of catalytic carbons, which can subsequently be translated to improve biopolymer-derived carbons in an economical way. Aspects of polymer carbonization discussed include carbonization mechanisms, effects of crosslinkers, polymer microstructure, heteroatom control, and effects of nanostructuring.

Superior one-pot synthesis of a doped graphene oxide electrode for a high power density supercapacitor

The facile one-pot synthesis of sulfur-doped reduced graphene oxide results in a high powder density and easily reproducible electrode material.

Facile electrosynthesis of nano flower like metal-organic framework and its nanocomposite with conjugated polymer as a novel and hybrid electrode material for highly capacitive pseudocapacitors

The [Cu(btec)_0.5DMF] (H₄btec=1,2,4,5-benzenetetracarboxylate acid) was electrosynthesized on the graphite working electrode by applying catholic potential. The [Cu(btec)_0.5DMF] grows on a graphite surface which results from the coordination of 1,2,4,5-benzenetetracarboxylate anions with Cu²⁺ cations. The electrosynthesized [Cu(btec)_0.5DMF] was characterized by X-ray diffraction, scanning electron microscopy. Furthermore, POAP/Cu(btec)_0.5DMF nanocomposite film electrosynthesized on the surface of the carbon paste electrode by cyclic voltammetry. Different electrochemical methods including galvanostatic charge-discharge experiments, cyclic voltammetry and electrochemical impedance spectroscopy are carried out in order to investigate the performance of the system. This work introduces new nanocomposite materials for electrochemical redox capacitors with advantages including ease synthesis, high active surface area and stability in an aqueous electrolyte.