Investigation of the inner corrosion layer formed in pulse electrodeposition coating on Mg-Sr alloy and corresponding degradation behavior

A review on properties of magnesium-based alloys for biomedical applications

With changing lifestyles, the demand for bone implantation has been increasing day by day. The deficiency of nutritious elements within the human body results in certain diseases like osteoporosis, rickets, and other skeletal disorders; lack of physical activities; and the increasing number of accidents are the primary reasons for bone damage/fracture. Metallic implants made up of chrome steel, cobalt-based alloys, and titanium-based alloys are being majorly used worldwide owing to their high strength and high corrosion resistance which makes them permanent orthopedic bioimplant materials, however, they display a stress-shielding effect and it also requires an implant removal surgery. Thus, these problems can be addressed through the employment of biodegradable materials. Among the available biodegradable metallic materials, Mg alloys have been identified as a prospective orthopedic implant material. These alloys are biodegradable as well as biocompatible, however, they experience a relatively higher rate of degradation limiting their usability as implant material. This study attempts to comprehensively assess the effects of various alloying elements such as Ca, Zn, Sn, Mn, Sr and Rare earth elements (REEs) on the mechanical and degradation behavior (bothin vivoandin vitro) of Mg alloys. Since the microstructure, mechanical properties and degradation response of the Mg alloys are dependent on the processing route, hence detailed processing- property database of different Mg alloys is provided in this paper.

Antibacterial metals and alloys for potential biomedical implants

Metals and alloys, including stainless steel, titanium and its alloys, cobalt alloys, and other metals and alloys have been widely used clinically as implant materials, but implant-related infection or inflammation is still one of the main causes of implantation failure. The bacterial infection or inflammation that seriously threatens human health has already become a worldwide complaint. Antibacterial metals and alloys recently have attracted wide attention for their long-term stable antibacterial ability, good mechanical properties and good biocompatibility in vitro and in vivo. In this review, common antibacterial alloying elements, antibacterial standards and testing methods were introduced. Recent developments in the design and manufacturing of antibacterial metal alloys containing various antibacterial agents were described in detail, including antibacterial stainless steel, antibacterial titanium alloy, antibacterial zinc and alloy, antibacterial magnesium and alloy, antibacterial cobalt alloy, and other antibacterial metals and alloys. Researches on the antibacterial properties, mechanical properties, corrosion resistance and biocompatibility of antibacterial metals and alloys have been summarized in detail for the first time. It is hoped that this review could help researchers understand the development of antibacterial alloys in a timely manner, thereby could promote the development of antibacterial metal alloys and the clinical application.

The current trends of Mg alloys in biomedical applications-A review

Magnesium (Mg) has emerged as an ideal alternative to the permanent implant materials owing to its enhanced properties such as biodegradation, better mechanical strengths than polymeric biodegradable materials and biocompatibility. It has been under investigation as an implant material both in cardiovascular and orthopedic applications. The use of Mg as an implant material reduces the risk of long-term incompatible interaction of implant with tissues and eliminates the second surgical procedure to remove the implant, thus minimizes the complications. The hurdle in the extensive use of Mg implants is its fast degradation rate, which consequently reduces the mechanical strength to support the implant site. Alloy development, surface treatment, and design modification of implants are the routes that can lead to the improved corrosion resistance of Mg implants and extensive research is going on in all three directions. In this review, the recent trends in the alloying and surface treatment of Mg have been discussed in detail. Additionally, the recent progress in the use of computational models to analyze Mg bioimplants has been given special consideration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1970-1996, 2019.

A Retrospective Case Series of Carbon Fiber Plate Fixation of Ankle Fractures

Distal fibula fractures represent a common problem in orthopaedics. When fibula fractures require operative fixation, implants are typically made from stainless steel or titanium alloys. Carbon fiber implants have been used elsewhere in orthopaedics for years, and their advantages include a modulus of elasticity similar to that of bone, biocompatibility, increased fatigue strength, and radiolucency. This study hypothesized that carbon fiber plates would provide similar outcomes for ankle fracture fixation as titanium and steel implants. A retrospective chart review was performed of 30 patients who underwent fibular open reduction and internal fixation (ORIF). The main outcomes assessed were postoperative union rate and complication rate. The nonunion or failure rate for carbon fiber plates was 4% (1/24), and the union rate was 96% (23/24). The mean follow-up time was 20 months, and the complication rate was 8% (2/24). Carbon fiber plates are a viable alternative to metal plates in ankle fracture fixation, demonstrating union and complication rates comparable to those of traditional fixation techniques. Their theoretical advantages and similar cost make them an attractive implant choice for ORIF of the fibula. However, further studies are needed for extended follow-up and inclusion of larger patient cohorts.

LEVELS OF EVIDENCE

Level IV: Retrospective Case series.