'Chocolate' silver nanoparticles: Synthesis, antibacterial activity and cytotoxicity

AgNP Composite Silicone-Based Polymer Self-Healing Antifouling Coatings

Biofouling poses a significant challenge to the marine industry, and silicone anti-biofouling coatings have garnered extensive attention owing to their environmental friendliness and low surface energy. However, their widespread application is hindered by their low substrate adhesion and weak static antifouling capabilities. In this study, a novel silicone polymer polydimethylsiloxane (PDMS)-based poly(urea-thiourea-imine) (PDMS-PUTI) was synthesized via stepwise reactions of aminopropyl-terminated polydimethylsiloxane (APT-PDMS) with isophorone diisocyanate (IPDI), isophthalaldehyde (IPAL), and carbon disulfide (CS2). Subsequently, a nanocomposite coating (AgNPs-x/PDMS-PUTI) was prepared by adding silver nanoparticles (AgNPs) to the polymer PDMS-PUTI. The dynamic multiple hydrogen bonds formed between urea and thiourea linkages, along with dynamic imine bonds in the polymer network, endowed the coating with outstanding self-healing properties, enabling complete scratch healing within 10 min at room temperature. Moreover, uniformly dispersed AgNPs not only reduced the surface energy of the coating but also significantly enhanced its antifouling performance. The antibacterial efficiency against common marine bacteria Pseudomonas aeruginosa (P.sp) and Staphylococcus aureus (S.sp) was reduced by 97.08% and 96.71%, respectively, whilst the diatom settlement density on the coating surface was as low as approximately 59 ± 3 diatom cells/mm2. This study presents a novel approach to developing high-performance silicone antifouling coatings.

SERS analysis, DFT, and solution effects regarding the structural and optical characteristics of folic acid biomolecule adsorbed on a Cu3 metal cluster

The optical characteristics of folic acid (ABP) and metal clusters of copper (Cu3) at various locations were investigated by means of density functional theory (DFT) computations. Mulliken charge analysis and molecular electrostatic potential (MEP) surface show how charge moves from Cu3 to ABP through the various groups. The peak in the UV-Vis spectra of ABP-Cu3 is caused by bonding and anti-bonding orbitals. In both vacuum and aqueous conditions, the polarizability values of ABP-Cu3 cluster are significantly higher than those of pure ABP, indicating a possible enhancement of the nonlinear optical (NLO) effect. Our research investigates the possibility of using ABP adsorbed metal clusters for NLO materials. Surface enhanced Raman scattering (SERS) in the ABP adsorbed metal clusters enhances the vibrational modes of ABP. Adsorption energies are found to be in the range -17.08 to -58.52 kcal/mol in vacuum and -53.34 to -93.44 kcal/mol in aqueous medium for the different configurations for ABP-Cu3. It indicates that metal clusters adsorbed by ABP are stable in the aqueous media. Experimental IR and UV-Vis of ABP is in agreement with theoretically predicted ones.

Assessing cytotoxicity and endoplasmic reticulum stress in human blood-brain barrier cells due to silver and copper oxide nanoparticles

In recent years, it has been generally accepted that metal-based nanoparticles (NPs) may induce stress in the endoplasmic reticulum (ER), a key organelle where protein folding occurs. We examined ER stress in immortalized human cerebral microvascular cells (hCMEC/D3) after exposure to silver-NPs (Ag-NPs)- and copper oxide-NPs (CuO-NPs) induced toxicity at < 10 nm and < 40 nm or < 50 nm diameters, respectively. In cytotoxicity assessments, cells were exposed to different CuO-NPs (5-400 µg/mL) or Ag-NPs (1-10 µg/mL) concentration ranges for 24 h and 72 h, and tetrazole salt reduction assays (EZ4U) were performed. Also, Ag-NP or CuO-NP effects on cell proliferation, apoptosis (caspase 3/7 assays), and ER stress and cell morphology were evaluated. In ER stress assessments, RNA-like endoplasmic reticulum kinase (PERK), activating transcription factor 6 (ATF6), inositol-requiring enzyme 1 (IRE1a), and others stress factor mRNA levels were determined after 24 h treatment using Real-Time PCR. Increased stress sensors (IRE1a, PERK, and ATF6) mRNA levels were observed after exposure to Ag-NPs (< 10 and < 40 nm) or CuO-NPs (< 50 nm). We investigated the expression of tight junction (TJ) proteins (barrier junctions) and showed that both types of NP reduced of OCLN gene expression. Morphological changes were observed after Ag-NP or CuO-NP exposure using holotomographic microscopy. Our data suggest that Ag- and CuO-NPs should undergo future in vitro and in vivo toxicology studies, especially for downstream biomedical application and occupational risk assessments.

Green Synthesis of Narrow-Size Silver Nanoparticles Using Ginkgo biloba Leaves: Condition Optimization, Characterization, and Antibacterial and Cytotoxic Activities

Natural products derived from medicinal plants offer convenience and therapeutic potential and have inspired the development of antimicrobial agents. Thus, it is worth exploring the combination of nanotechnology and natural products. In this study, silver nanoparticles (AgNPs) were synthesized from the leaf extract of Ginkgo biloba (Gb), having abundant flavonoid compounds. The reaction conditions and the colloidal stability were assessed using ultraviolet-visible spectroscopy. X-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy (FTIR) were used to characterize the AgNPs. AgNPs exhibited a spherical morphology, uniform dispersion, and diameter ranging from ~8 to 9 nm. The FTIR data indicated that phytoconstituents, such as polyphenols, flavonoids, and terpenoids, could potentially serve as reducing and capping agents. The antibacterial activity of the synthesized AgNPs was assessed using broth dilution and agar well diffusion assays. The results demonstrate antibacterial effects against both Gram-positive and Gram-negative strains at low AgNP concentrations. The cytotoxicity of AgNPs was examined in vitro using the CCK-8 method, which showed that low concentrations of AgNPs are noncytotoxic to normal cells and promote cell growth. In conclusion, an environmentally friendly approach for synthesizing AgNPs from Gb leaves yielded antibacterial AgNPs with minimal toxicity, holding promise for future applications in the field of biomedicine.

Mycosynthesis of Zinc Oxide Nanoparticles Exhibits Fungal Species Dependent Morphological Preference

Filamentous fungi can synthesize a variety of nanoparticles (NPs), a process referred to as mycosynthesis that requires little energy input, do not require the use of harsh chemicals, occurs at near neutral pH, and do not produce toxic byproducts. While NP synthesis involves reactions between metal ions and exudates produced by the fungi, the chemical and biochemical parameters underlying this process remain poorly understood. Here, the role of fungal species and precursor salt on the mycosynthesis of zinc oxide (ZnO) NPs is investigated. This data demonstrates that all five fungal species tested are able to produce ZnO structures that can be morphologically classified into i) well-defined NPs, ii) coalesced/dissolving NPs, and iii) micron-sized square plates. Further, species-dependent preferences for these morphologies are observed, suggesting potential differences in the profile or concentration of the biochemical constituents in their individual exudates. This data also demonstrates that mycosynthesis of ZnO NPs is independent of the anion species, with nitrate, sulfate, and chloride showing no effect on NP production. These results enhance the understanding of factors controlling the mycosynthesis of ceramic NPs, supporting future studies that can enable control over the physical and chemical properties of NPs formed through this "green" synthesis method.

Quercetin- and caffeic acid-functionalized chitosan-capped colloidal silver nanoparticles: one-pot synthesis, characterization, and anticancer and antibacterial activities

The presented study comprises the one-pot synthesis and the characterization of quercetin- and caffeic acid-functionalized chitosan-capped colloidal silver nanoparticles (Ch/Q- and Ch/CA-Ag NPs), and their antibacterial and anticancer activities. The formation of Ch/Q- and Ch/CA-Ag NPs has been confirmed by ultraviolet-visible (UV-vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and transmission electron microscopy (TEM). The characteristic surface plasmon resonance (SPR) absorption band has been found at 417 and 424 nm for Ch/Q- and Ch/CA-Ag NPs, respectively. The formation of a chitosan shell comprising quercetin and caffeic acid, which surround the colloidal core Ag NPs, was confirmed by UV-vis, and FTIR analyses, and monitored by TEM microscopy. The size of nanoparticles has been determined as 11.2 and 10.3 nm for Ch/Q- and Ch/CA-Ag, respectively. The anticancer activity of Ch/Q- and Ch/CA-Ag NPs has been evaluated against U-118 MG (human glioblastoma) and ARPE-19 (human retinal pigment epithelium) cells. Both NPs showed anticancer activity, but Ch/Q-Ag NPs seemed to be more effective on cancer cell lines (U-118 MG) in comparison to healthy ones (ARPE-19). Furthermore, the antibacterial activity of Ch/Q- and Ch/CA-Ag NPs against Gram-negative (P. aeruginosa and E. coli) and Gram-positive (S. aureus and S. epidermidis) bacteria was determined, and dose-dependent antibacterial effects were found.

Metallic and non-metallic nanoparticles from plant, animal, and fisheries wastes: potential and valorization for application in agriculture

Global agriculture is facing tremendous challenges due to climate change. The most predominant amongst these challenges are abiotic and biotic stresses caused by increased incidences of temperature extremes, drought, unseasonal flooding, and pathogens. These threats, mostly due to anthropogenic activities, resulted in severe challenges to crop and livestock production leading to substantial economic losses. It is essential to develop environmentally viable and cost-effective green processes to alleviate these stresses in the crops, livestock, and fisheries. The application of nanomaterials in farming practice to minimize nutrient losses, pest management, and enhance stress resistance capacity is of supreme importance. This paper explores innovative methods for synthesizing metallic and non-metallic nanoparticles using plants, animals, and fisheries wastes and their valorization to mitigate abiotic and biotic stresses and input use efficiency in climate-smart and stress-resilient agriculture including crop plants, livestock, and fisheries.

Green Route to Produce Silver Nanoparticles Using the Bioactive Flavonoid Quercetin as a Reducing Agent and Food Anti-Caking Agents as Stabilizers

In previous work, the isolated polyphenolic compound (PPC) quercetin was used as a reducing agent in the formation of silver nanoparticles (AgNPs), testing two types of quercetin. This PPC is a bioactive molecule that provides the electrons for the reduction of silver ions to zerovalent silver. The results demonstrated that quercetin in dietary supplement presentation was better than reagent grade quercetin for the synthesis of AgNPs, and the difference between them was that the dietary supplement had microcrystalline cellulose (CM) in its formulation. Therefore, this dietary anti-caking agent was added to the reagent-grade quercetin to validate this previously found improvement. AgNPs were obtained at neutral pH by a green route using quercetin as a reducing agent and microcrystalline cellulose and maltodextrin as stabilizing agents. In addition, different ratios were evaluated to find the optimum ratio. Ultraviolet-Visible spectroscopy (UV-VIS), Atomic Force Microscope (AFM), Z-potential, Dynamic Light Scattering (DLS) and X-ray Powder Diffraction (XRD) were used for characterization. The antibacterial activity of the S. aureus and E. coli agent was tested by the disk diffusion and microdilution method. According to the results, this green synthesis needs the use of food stabilizer when working at pH 7 to maintain AgNPs in the long term. The ideal ratio of reducing the agent:stabilizing agent was 1:2, since with this system stable AgNPs are obtained for 2 months and with improved antimicrobial activity, validating this method was ecologically and economically viable.

Supercritical Fluid-Assisted Fabrication of Pd Nanoparticles/Graphene Using a Choline Chloride-Oxalic Acid Deep Eutectic Solvent for Enhancing the Electrochemical Oxidation of Glycerol

A green method for synthesizing Pd nanoparticles/graphene composites from a choline chloride-oxalic acid deep eutectic solvent (DES) without a reducing agent or a surfactant is reported. Deep eutectic solvents are usually composed of halide salts and hydrogen-bond donors, and many are biocompatible and biodegradable. The merits of deep eutectic solvents include that they serve as reducing agents and dispersants, and Pd nanoparticles are tightly anchored to graphene. The size and dispersion of Pd particles are improved when supercritical carbon dioxide (scCO₂) is used because it has gaslike diffusivity and near-zero surface tension, which results in excellent wettability between the scCO₂ and the carbon surface. The prepared sc-Pd NPs/GR/SPCE shows excellent activity toward glycerol oxidation compared to composites not fabricated by scCO₂ processes. This study demonstrates the potential of using this scCO₂-assisted protocol combined with deep eutectic solvents to further construct nanoparticles/graphene composites.

Application of Metal Nanoparticles for Production of Self-Sterilizing Coatings

Metal nanoparticles (NPs) are increasingly being used in many areas, e.g., industry, pharmacy, and biomedical engineering. NPs can be obtained through chemical and biological synthesis or using physical methods. AgNPs, AuNPs, CuNPs, FeNPs, MgNPs, SnO2NPs, TiO2NPs, and ZnONPs are the most commonly synthesized metal nanoparticles. Many of them have anti-microbial properties and documented activity supported by many tests against some species of pathogenic bacteria, viruses, and fungi. AgNPs, which are used for the production of commercial self-sterilizing packages, are one of the best-explored nanoparticles. Moreover, the EFSA has approved the use of small doses of silver nanoparticles (0.05 mg Ag·kg−1) to food products. Recent studies have shown that metal NPs can be used for the production of coatings to prevent the spread of the SARS-CoV-2 virus, which has caused the global pandemic. Some nanoparticles (e.g., ZnONPs and MgONPs) have the Generally Recognized As Safe (GRAS) status, i.e., they are considered safe for consumption and can be used for the production of edible coatings, protecting food against spoilage. Promising results have been obtained in research on the use of more than one type of nanometals, which prevents the development of pathogen resistance through various mechanisms of inactivation thereof.

The antimicrobial effect of 400 nm femtosecond laser and silver nanoparticles on gram-positive and gram-negative bacteria

Silver nanoparticles are well-known for their antimicrobial effect. However, they are potentially toxic in high doses. We explored the possibility of enhancing the bactericidal effect of low concentrations of silver nanoparticles with blue light femtosecond laser irradiation, since such concentrations are less toxic. The growth dynamics of Pseudomonas aeruginosa, Listeria monocytogenes and methicillin-resistant Staphylococcus aureus grown in pre-synthesized silver nanoparticles were measured with or without pre-irradiation with 50 mW and 400 nm femtosecond laser irradiation. With each bacterium, combined treatment with laser and silver nanoparticles significantly reduced bacterial growth, indicating that this form of treatment could be beneficial in the ongoing efforts to reduce the deleterious effects of antibiotic resistant Gram-positive and Gram-negative bacteria. The combined treatment was more antimicrobial than treatment with silver nanoparticles alone or photo-irradiation alone. P. aeruginosa and L. monocytogenes were more susceptible to the bactericidal effects of silver nanoparticles, and the combination of laser treatment and silver nanoparticles than MRSA.

Silver nanoparticles in endodontics: recent developments and applications

The elimination of endodontic biofilms and the maintenance of a leak-proof canal filling are key aspects of successful root canal treatment. Several materials have been introduced to treat endodontic disease, although treatment success is limited by the features of the biomaterials used. Silver nanoparticles (AgNPs) have been increasingly considered in dental applications, especially endodontics, due to their high antimicrobial activity. For the present study, an electronic search was conducted using MEDLINE (PubMed), the Cochrane Central Register of Controlled Trials (CENTRAL), Google Scholar, and EMBASE. This review provides insights into the unique characteristics of AgNPs, including their chemical, physical, and antimicrobial properties; limitations; and potential uses. Various studies involving different application methods of AgNPs were carefully examined. Based on previous clinical studies, the synthesis, means of obtaining, usage conditions, and potential cytotoxicity of AgNPs were evaluated. The findings indicate that AgNPs are effective antimicrobial agents for the elimination of endodontic biofilms.

Green Synthesized Silver Nanoparticles Immobilized on Activated Carbon Nanoparticles: Antibacterial Activity Enhancement Study and Its Application on Textiles Fabrics

This research aimed to enhance the antibacterial activity of silver nanoparticles (AgNPs) synthesized from silver nitrate (AgNO3) using aloe vera extract. It was performed by means of incorporating AgNPs on an activated carbon nanoparticle (ACNPs) under ultrasonic agitation (40 kHz, 2 × 50 watt) for 30 min in an aqueous colloidal medium. The successful AgNPs synthesis was clarified with both Ultraviolet-Visible (UV-Vis) and Fourier Transform Infrared (FTIR) spectrophotometers. The successful AgNPs-ACNPs incorporation and its particle size analysis was performed using Transmission Electron Microscope (TEM). The brown color suspension generation and UV-Vis's spectra maximum wavelength at around 480 nm confirmed the existence of AgNPs. The particle sizes of the produced AgNPs were about 5 to 10 nm in the majority number, which collectively surrounded the aloe vera extract secondary metabolites formed core-shell like nanostructure of 8.20 ± 2.05 nm in average size, while ACNPs themselves were about 20.10 ± 1.52 nm in average size formed particles cluster, and 48.00 ± 8.37 nm in average size as stacking of other particles. The antibacterial activity of the synthesized AgNPs and AgNPs-immobilized ACNPs was 57.58% and 63.64%, respectively (for E. coli); 61.25%, and 93.49%, respectively (for S. aureus). In addition, when the AgNPs-immobilized ACNPs material was coated on the cotton and polyester fabrics, the antibacterial activity of the materials changed, becoming 19.23% (cotton; E. coli), 31.73% (polyester; E. coli), 13.36% (cotton; S. aureus), 21.15% (polyester; S. aureus).

Synthesis and modification of bio-derived antibacterial Ag and ZnO nanoparticles by plants, fungi, and bacteria

Ag and ZnO nanoparticles (NP) can be prepared by physical, chemical, or eco-friendly methods. The biosynthesis of metal and metal oxide NPs by plants, fungi, and bacteria could be a promising way to obtain biocompatible NPs that have desirable antibacterial activities. However, the uniformity of shape, size, and size distribution of NPs are crucial to producing significant antibacterial results, particularly in physiological conditions such as infected wounds or septicemia. In this review, we discuss recent progress and challenges in the use of novel approaches for the biosynthesis of Ag and ZnO nanoparticles that have antibacterial activities.

Green synthesized Silver Nanoparticles as Silver Lining in Antimicrobial Resistance: A Review

Unprincipled use of antibiotics has led to the antimicrobial resistance (AMR) against mostly available compounds and now become a major cause of concern for the scientific community. However, in the past decade, green synthesized silver nanoparticles (AgNPs) have received greater attention for the development of newer therapies as antimicrobials by virtue of their unique physico-chemical properties. Unlike traditional antibiotics, AgNPs exert their action by acting on multiple mechanisms which make them potential candidates against AMR. Green synthesis of AgNPs using various medicinal plants has demonstrated broader spectrum of action against several microbes in a number of attempts. The present paper provides an insight into the scientific studies that have elucidated the positive role of plant extracts/phytochemicals during green synthesis of AgNPs and their future perspectives. The studies conducted so far seem promising still, a few factors like, the precise mechanism of action of AgNPs, their synergistic interaction with biomolecules, and industrial scalability need to be explored further till effective drug development using green synthesized AgNPs in healthcare systems against AMR is established.

First principle simulation of coated hydroxychloroquine on Ag, Au and Pt nanoparticles

From the first month of the COVID-19 pandemic, the potential antiviral properties of hydroxychloroquine (HCQ) and chloroquine (CQ) against SARS-CoV-2 suggested that these drugs could be the appropriate therapeutic candidates. However, their side effects directed clinical tests towards optimizing safe utilization strategies. The noble metal nanoparticles (NP) are promising materials with antiviral and antibacterial properties that can deliver the drug to the target agent, thereby reducing the side effects. In this work, we applied both the quantum mechanical and classical atomistic molecular dynamics approaches to demonstrate the adsorption properties of HCQ/CQ on Ag, Au, AgAu, and Pt nanoparticles. We found the adsorption energies of HCQ/CQ towards nanoparticles have the following trend: PtNP > AuNP > AuAgNP > AgNP. This shows that PtNP has the highest affinity in comparison to the other types of nanoparticles. The (non)perturbative effects of this drug on the plasmonic absorption spectra of AgNP and AuNP with the time-dependent density functional theory. The effect of size and composition of NPs on the coating with HCQ and CQ were obtained to propose the appropriate candidate for drug delivery. This kind of modeling could help experimental groups to find efficient and safe therapies.

Rapid green synthesis of non-cytotoxic silver nanoparticles using aqueous extracts of 'Golden Delicious' apple pulp and cumin seeds with antibacterial and antioxidant activity

Abstract

A simple, facile and rapid microwave irradiated system was applied to synthesize silver nanoparticles using 'Golden Delicious' apple pulp (Malus domestica) and cumin (Cuminum cyminum) seed extracts. The phytosynthesized AgNPs were characterized by Ultraviolet–Visible Spectroscopy (UV–vis), Fourier transform infrared (FTIR), X-ray Diffraction (XRD) Transmission Electron Microscopy (TEM) and Zeta sizer analysis. In the study, the presence of face-centered cubic crystalline structured metallic silver in AgNPs from apple and cumin extracts and the monodisperse nature of AgNPs with the size distribution range of 5.46–20 nm and 1.84–20.57 nm were confirmed, respectively. This study established an efficient green synthesis approach that created so far, the smallest silver nanoparticles by using these two extracts. According to the results obtained, AgNPs synthesized using both extracts were non-toxic against L929 mouse fibroblast cells, while they were effective against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria with a greater effect on S. aureus. Moreover, AgNPs synthesized through cumin extract exhibited a higher ABTS scavenging ability (96.43 ± 0.78% at 160 μg/mL) in comparison to apple pulp extract mediated AgNPs, while both AgNPs showed lower activity for DPPH (27.84 ± 0.56% and 13.12 ± 0.32% from cumin seed and apple pulp extracts, respectively). In summary, our results suggest the green non-cytotoxic AgNPs synthesized in this study could be a promising template for further biological and clinical applications.

Graphical abstract

Size-Dependent Bioactivity of Silver Nanoparticles: Antibacterial Properties, Influence on Copper Status in Mice, and Whole-Body Turnover

Purpose

The ability of silver nanoparticles (AgNPs) of different sizes to influence copper metabolism in mice is assessed.

Materials and Methods

AgNPs with diameters of 10, 20, and 75 nm were fabricated through a chemical reduction of silver nitrate and characterized by UV/Vis spectrometry, transmission and scanning electronic microscopy, and laser diffractometry. To test their bioactivity, Escherichia coli cells, cultured A549 cells, and C57Bl/6 mice were used. The antibacterial activity of AgNPs was determined by inhibition of colony-forming ability, and cytotoxicity was tested using the MTT test (viability, %). Ceruloplasmin (Cp, the major mammalian extracellular copper-containing protein) concentration and enzymatic activity were measured using gel-assay analyses and WB, respectively. In vitro binding of AgNPs with serum proteins was monitored with UV/Vis spectroscopy. Metal concentrations were measured using atomic absorption spectrometry.

Results

The smallest AgNPs displayed the largest dose- and time-dependent antibacterial activity. All nanoparticles inhibited the metabolic activity of A549 cells in accordance with dose and time, but no correlation between cytotoxicity and nanoparticle size was found. Nanosilver was not uniformly distributed through the body of mice intraperitoneally treated with low AgNP concentrations. It was predominantly accumulated in liver. There, nanosilver was included in ceruloplasmin, and Ag-ceruloplasmin with low oxidase activity level was formed. Larger nanoparticles more effectively interfered with the copper metabolism of mice. Large AgNPs quickly induced a drop of blood serum oxidase activity to practically zero, but after cancellation of AgNP treatment, the activity was rapidly restored. A major fraction of the nanosilver was excreted in the bile with Cp. Nanosilver was bound by alpha-2-macroglobulin in vitro and in vivo, but silver did not substitute for the copper atoms of Cp in vitro.

Conclusion

The data showed that even at low concentrations, AgNPs influence murine copper metabolism in size-dependent manner. This property negatively correlated with the antibacterial activity of AgNPs.

Ultrasmall AgNP-Impregnated Biocompatible Hydrogel with Highly Effective Biofilm Elimination Properties

Ultrasmall silver nanoparticles (AgNPs; size < 3 nm) have attracted a great deal of interest as an alternative to commercially available antibiotics due to their ability to eliminate a wide range of microbial pathogens. However, most of these ultrasmall AgNPs are highly reactive and unstable, as well as susceptible to fast oxidation. Therefore, both the stability and toxicity remain major shortcomings for their clinical application and uptake. To circumvent these problems, we present a novel strategy to impregnate ultrasmall AgNPs into a biocompatible thermosensitive hydrogel that enables controlled release of silver alongside long-term storage stability and highly potent antibacterial activity. The advantage of this strategy lies in the combination of a homogenous dispersion of AgNPs in a hydrogel network, which serves as a sustained-release reservoir, and the unique feature of ultrasmall AgNP size, which provides an improved biofilm eradication capacity. The superior biofilm dispersion properties of the AgNP hydrogel is demonstrated in both single-species and multispecies biofilms, eradicating ∼80% of established biofilms compared to untreated controls. Notably, the effective antibacterial concentration of the formulation shows minimal toxicity to human fibroblasts and keratinocytes. These findings present a promising novel strategy for the development of AgNP hydrogels as an efficient antibacterial platform to combat resistant bacterial biofilms associated with wound infections.

First principle study of silver nanoparticle interactions with antimalarial drugs extracted from Artemisia annua plant

Silver nanoparticles have a great potential in a broad range of applications such as drug-delivery carriers because of their antiviral and antibacterial properties. In this study, the coating properties of silver nanoparticle (size range of 1.6 nm) with three common anti-malarial drugs, Artemisinin, Artemether, and Artesunate have been studied by using the quantum mechanical and classical atomistic molecular dynamics simulation in order to use as the drug delivery to treat malaria and COVID-19 diseases. The optimized structure, frequencies, charge distribution, and the electrostatic potential maps of the three drug molecules were simulated by using the density functional theory (DFT) at the B3LYP/6-311++g(d,p) level of theory. Then, molecular dynamics simulation was used to study the coating of AgNP with each of these drugs. The affinity of interaction was obtained as Artesunate > Artemether > Artemisinin which is in agreement with the DFT results on the adsorption of drugs on the Ag(111) slab.

Nanoengineered Antibacterial Coatings and Materials: A Perspective

This feature article begins by outlining the problem of infection and its implication on healthcare. The initial introductory section is followed by a description of the four distinct classes of antibacterial coatings and materials, i.e., bacteria repealing, contact killing, releasing and responsive, that were developed over the years by our team and others. Specific examples of each individual class of antibacterial materials and a discussion on the pros and cons of each strategy are provided. The article contains a dedicated section focused on silver nanoparticle based coatings and materials, which have attracted tremendous interest from the scientific and medical communities. The article concludes with the author’s view regarding the future of the field.

A review of the antimicrobial potential of precious metal derived nanoparticle constructs

The field of nanotechnology is rapidly growing. The promise of pharmacotherapeutics emerging from this vast field has drawn the attention of many researchers. However, with the increase in the prevalence of antibiotic resistant microorganisms, the manifestations of these promises are needed now more than ever. Many have postulated the antimicrobial potential of nanoparticle constructs derived from precious metals/noble metals nanoparticles (NMNPs), such as silver nanoparticles that show activity against multidrug resistant bacteria. In this review we will evaluate the current studies and explore the data to obtain a clear picture of the potential of these particles and the validity of the claims of drug resistant treatments with NMNPs.

The interplay between size and valence state on the antibacterial activity of sub-10 nm silver nanoparticles

Silver nanoparticles (AgNPs) have attracted enormous interest because of their excellent antibacterial properties, low cytotoxicity and limited evidence for resistance. As a general trend, smaller nanoparticles are considered to have stronger antibacterial activity. In this work we investigate whether this trend is valid for the sub-10 nm region by designing and synthesising three types of sub-10 nm AgNPs (∼1.87, ∼2.93 and ∼6.53 nm) to reveal the influence of size, valence state and structure on the antibacterial potency of AgNPs. We found that NPs with a size of ∼2.93 nm having a high concentration of silver in the first valence state presented the highest bacterial killing potency as well as low cytotoxicity to mammalian cells. The new insights presented in this study open future avenues for the engineering of highly potent silver nanoantibiotics that can be incorporated into future advanced medical devices and therapies capable of protecting patients from infections.

Methylene blue dye removal on silver nanoparticles reduced by Kyllinga brevifolia

Silver nanoparticles (AgNPs) were prepared by reacting Kyllinga brevifolia extract (KBE) with AgNO₃ aqueous solution at room temperature (22 ± 3 °C). The phytochemical constituents in KBE responsible for the reduction process were identified as carbohydrate, protein, and plant sterols (stigmasterol and campesterol). KBE was also found to function as a capping agent for stabilization of AgNPs. The AgNPs were stable at room temperature and had a quasi-spherical shape with an average particle size 22.3 nm. The use of KBE offers not only eco-friendly and non-pathogenic path for AgNPs formation, it also induced rapid formation of the AgNPs. Methylene blue (MB) removal was then done on the AgNPs in the presence of either KBE or NaBH₄. Ninety-three percent removal of MB was achieved with a rate of reaction 0.2663 min^-1 in the solution with KBE+AgNPs (pH 2). However, in NaBH₄+AgNPs system, 100% MB removal was achieved at pH 8-10. The reaction rate was 2.5715 min^-1 indicating a fast removal rate of MB dye. The process of reduction occurs via electron relay effect whereas in KBE+AgNPs system, sedimentation occurred along with the reduction process. Nevertheless, the use of KBE+AgNPs system is preferred as the reducing agent is more benign to the environment.

Nanotoxicity of engineered nanomaterials (ENMs) to environmentally relevant beneficial soil bacteria - a critical review

Deposition of engineered nanomaterials (ENMs) in various environmental compartments is projected to continue rising exponentially. Terrestrial environments are expected to be the largest repository for environmentally released ENMs. Because ENMs are enriched in biosolids during wastewater treatment, agriculturally applied biosolids facilitate ENM exposure of key soil micro-organisms, such as plant growth-promoting rhizobacteria (PGPR). The ecological ramifications of increasing levels of ENM exposure of terrestrial micro-organisms are not clearly understood, but a growing body of research has investigated the toxicity of ENMs to various soil bacteria using a myriad of toxicity end-points and experimental procedures. This review explores what is known regarding ENM toxicity to important soil bacteria, with a focus on ENMs which are expected to accumulate in terrestrial ecosystems at the highest concentrations and pose the greatest potential threat to soil micro-organisms having potential indirect detrimental effects on plant growth. Knowledge gaps in the fundamental understanding of nanotoxicity to bacteria are identified, including the role of physicochemical properties of ENMs in toxicity responses, particularly in agriculturally relevant micro-organisms. Strategies for improving the impact of future research through the implementation of in-depth ENM characterization and use of necessary experimental controls are proposed. The future of nanotoxicological research employing microbial ecoreceptors is also explored, highlighting the need for continued research utilizing bacterial isolates while concurrently expanding efforts to study ENM-bacteria interactions in more complex environmentally relevant media, e.g. soil. Additionally, the particular importance of future work to extensively examine nanotoxicity in the context of bacterial ecosystem function, especially of plant growth-promoting agents, is proposed.

Self-sterilizing antibacterial silver-loaded microneedles

Here we report the development of slef-sterilizing dissolving microneedles, a promising vehicle for vaccine and drug delivery.

Fabrication of magnesium oxide nanoparticles by solvent alteration and their bactericidal applications

MgO nanoparticles are synthesized using water, ethanol and aqueous CTAB solution. The nanoparticles synthesized in ethanol exhibited smallest size, maximum reactive oxygen species generation and maximum antibacterial ability, and low haemolysis.

Biomedical Applications of Silver Nanoparticles: An Up-to-Date Overview

During the past few years, silver nanoparticles (AgNPs) became one of the most investigated and explored nanotechnology-derived nanostructures, given the fact that nanosilver-based materials proved to have interesting, challenging, and promising characteristics suitable for various biomedical applications. Among modern biomedical potential of AgNPs, tremendous interest is oriented toward the therapeutically enhanced personalized healthcare practice. AgNPs proved to have genuine features and impressive potential for the development of novel antimicrobial agents, drug-delivery formulations, detection and diagnosis platforms, biomaterial and medical device coatings, tissue restoration and regeneration materials, complex healthcare condition strategies, and performance-enhanced therapeutic alternatives. Given the impressive biomedical-related potential applications of AgNPs, impressive efforts were undertaken on understanding the intricate mechanisms of their biological interactions and possible toxic effects. Within this review, we focused on the latest data regarding the biomedical use of AgNP-based nanostructures, including aspects related to their potential toxicity, unique physiochemical properties, and biofunctional behaviors, discussing herein the intrinsic anti-inflammatory, antibacterial, antiviral, and antifungal activities of silver-based nanostructures.

Understanding the prospective of nano-formulations towards the treatment of psoriasis

Psoriasis is a consistently recurring, inflammatory, autoimmune disorder of the skin, affecting about 2-5% of the world population. Abundant therapeutic agents are accessible for the treatment of psoriasis. Nevertheless, none of them are entirely secure and effective to treat the disease without compromising patient compliance. Furthermore, already existing drugs are supposed to restrain the ailment and alleviate the sign and symptoms with no complete cure. However, they focus on restraining the disease and alleviating the symptoms without providing an absolute cure. Therefore there remains a vital challenge, to explore a new drug moiety or delivery system which could safely and effectively manage psoriasis without compromising patient compliance. Furthermore, conventional formulations offer reduced benefit/risk ratio of anti-psoriatic drugs, which limits the use of existing conventional formulations. Novel formulations based on nanocarriers are a promising prospect to overcome the limitation of conventional formulations by offering a reduction in dose, dosing frequency, dose-dependent, side effects with enhanced efficacy. Presently nano-formulations have gained widespread application for effective and safe treatment of psoriasis. The present review primarily focuses on conventional therapeutic strategy and recent advances in lipid-based, polymer-based and metallic nano-formulations of a variety of anti-psoriatic drugs. The practicability of various nanocarrier systems including liposomes, nanostructured lipid carriers, ethosomes, solid lipid nanoparticles, nanocapsules, micelles, dendrimers, gold nanoparticles and silver nanoparticles have been discussed in detail. The review also traces related patents to exemplify the role of various nanoparticles in psoriasis treatment. In a nutshell, nano-formulations remain established as a promising modality for treating psoriasis treatment as they propose better penetration, targeted delivery, enhanced safety, and efficacy.

"Chocolate" Gold Nanoparticles-One Pot Synthesis and Biocompatibility

The chemical synthesis of nanoparticles can involve and generate toxic materials. Here, we present for the first time, a one pot direct route to synthesize gold nanoparticles (AuNPs) using natural cacao extract as both a reducing and stabilizing agent. The nanoparticles were characterized by UV-visible spectroscopy (UV-VIS), dynamic light scattering (DLS), and transmission electron microscopy (TEM); and have excellent biocompatibility with human primary dermal fibroblasts.

Effects on cytotoxicity and antibacterial properties of the incorporations of silver nanoparticles into the surface coating of dental alloys

The aim of this study was to research the changes in cytotoxicity and antibacterial properties after silver nanoparticles (AgNPs) were incorporated into the surface coating of dental alloys. AgNPs were attached to cobalt chromium alloys and pure titanium using a hydrothermal method, according to the reaction: AgNO₃+NaBH₄→ Ag+1/2H₂+1/2B₂H₆+NaNO₃. A 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay was used to evaluate the cytotoxicity of the alloys when in contact with osteogenic precursor cells (MC3T3-E1) from mice and mesenchymal stem cells (BMSC) from rats. The antibacterial properties of dental alloys incorporating three different concentrations (10, 4, and 2 μmol/L) of AgNPs were tested on Staphylococcus aureus (SA) and Streptococcus mutans (MS). High cytotoxicity values were observed for all dental alloys that contained 0% of AgNPs (the control groups). The incorporation of AgNPs reduced cytotoxicity values. No significant difference was observed for antibacterial performance when comparing dental alloys containing AgNPs to the respective control groups. The results demonstrated that the cobalt chromium alloys and pure titanium all had cytotoxicity to MC3T3-E1 and BMSC and that the incorporation of AgNPs could reduce this cytotoxicity. The concentrations of AgNPs adopted in this study were found to have no antibacterial action against SA or MS.

Cytotoxicity of Plant-Mediated Synthesis of Metallic Nanoparticles: A Systematic Review

In the field of medicine, nanomaterials, especially those derived using the green method, offer promise as anti-cancer agents and drug carriers. However, the biosafety of metallic nanoparticles used as anti-cancer agents remains a concern. The goal of this systematic review was to compare the cytotoxicity of different plant-mediated syntheses of metallic nanoparticles based on their potency, therapeutic index, and cancer cell type susceptibility in the hopes of identifying the most promising anti-cancer agents. A literature search of electronic databases including Science Direct, PubMed, Springer Link, Google Scholar, and ResearchGate, was conducted to obtain research articles. Keywords such as biosynthesis, plant synthesis, plant-mediated, metallic nanoparticle, cytotoxicity, and anticancer were used in the literature search. All types of research materials that met the inclusion criteria were included in the study regardless of whether the results were positive, negative, or null. The therapeutic index was used as a safety measure for the studied compound of interest. Data from 76 selected articles were extracted and synthesised. Seventy-two studies reported that the cytotoxicity of plant-mediated synthesis of metallic nanoparticles was time and/or dose-dependent. Biosynthesised silver nanoparticles demonstrated higher cytotoxicity potency compared to gold nanoparticles synthesised by the same plants (Plumbago zeylanica, Commelina nudiflora, and Cassia auriculata) irrespective of the cancer cell type tested. This review also identified a correlation between the nanoparticle size and morphology with the potency of cytotoxicity. Cytotoxicity was found to be inversely proportional to nanoparticle size. The plant-mediated syntheses of metallic nanoparticles were predominantly spherical or quasi-spherical, with the median lethal dose of 1⁻20 µg/mL. Nanoparticles with other shapes (triangular, hexagonal, and rods) were less potent. Metallic nanoparticles synthesised by Abutilon inducum, Butea monosperma, Gossypium hirsutum, Indoneesiella echioides, and Melia azedarach were acceptably safe as anti-cancer agents, as they had a therapeutic index of >2.0 when tested on both cancer cells and normal human cells. Most plant-mediated syntheses of metallic nanoparticles were found to be cytotoxic, although some were non-cytotoxic. The results from this study suggest a focus on a selected list of potential anti-cancer agents for further investigations of their pharmacodynamic/toxicodynamic and pharmacokinetic/toxicokinetic actions with the goal of reducing the Global Burden of Diseases and the second leading cause of mortality.

Bactericidal Properties of Plants-Derived Metal and Metal Oxide Nanoparticles (NPs)

Nanoparticles (NPs) are nano-sized particles (generally 1–100 nm) that can be synthesized through various methods. The wide range of physicochemical characteristics of NPs permit them to have diverse biological functions. These particles are versatile and can be adopted into various applications, particularly in biomedical field. In the past five years, NPs’ roles in biomedical applications have drawn considerable attentions, and novel NPs with improved functions and reduced toxicity are continuously increasing. Extensive studies have been carried out in evaluating antibacterial potentials of NPs. The promising antibacterial effects exhibited by NPs highlight the potential of developing them into future generation of antimicrobial agents. There are various methods to synthesize NPs, and each of the method has significant implication on the biological action of NPs. Among all synthetic methods, green technology is the least toxic biological route, which is particularly suitable for biomedical applications. This mini-review provides current update on the antibacterial effects of NPs synthesized by green technology using plants. Underlying challenges in developing NPs into future antibacterials in clinics are also discussed at the present review.

Phytochemical-assisted synthetic approaches for silver nanoparticles antimicrobial applications: A review

Silver nanoparticles (Ag NPs) have recently emerged as promising materials in the biomedical sciences because of their antimicrobial activities towards a wide variety of microorganisms. Nanomaterial-based drug delivery systems with antimicrobial activity are critical as they may lead to novel treatments for cutaneous pathogens. In this review, we explore the recent progress on phytochemical-mediated synthesis of Ag NPs for antimicrobial treatment and associated infectious diseases. We discuss the biological activity of Ag NPs including mechanisms, antimicrobial activity, and antifungal/antiviral effects towards various microorganisms. The advent of Ag NP-based nanocarriers and nano-vehicles is also described for treatment of different diseases, along with the mechanisms of microbial inhibition. Overall, this review will provide a rational vision of the main achievements of Ag NPs as nanocarriers for inhibition of various microbial agents (bacteria, fungus, and virus).

Probiotic-mediated blueberry (Vaccinium corymbosum L.) fruit fermentation to yield functionalized products for augmented antibacterial and antioxidant activity

The aim of this study was to investigate the fermentation of blueberry fruit with selected probiotic bacteria (Bacillus amyloliquefaciens and Lactobacillus brevis) and yeast (Starmerella bombicola) isolated from fermented starfish for the extraction of functionalized products for biomedical applications. All probiotic-based fermented extracts showed augmented antibacterial and antioxidant activity compared to the control. Biochemical parameters of viable cell count, titratable acidity, total phenol, total anthocyanin, total flavonoids, total sugar, and reducing sugar were analyzed during a 0-96 h fermentation period. In addition, Fourier transform infrared (FTIR) spectroscopy was performed to determine the functional groups in the control and fermented extracts and it signifies the presence of alcohol groups, phenol groups, carboxylic acids, and aliphatic amines, respectively. The well diffusion, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) assays determined that the S. bombicola-mediated fermented extract has excellent activity, followed by B. amyloliquefaciens and L. brevis, at a high concentration of 1.0 g/mL fermented extract. The ABTS and DPPH showed significant scavenging activity with IC₅₀ values of (30.52 ± 0.08)/(155.10 ± 0.06) μg/mL, (24.82 ± 0.16)/(74.21 ± 1.26) μg/mL, and (21.81 ± 0.08)/(125.11 ± 0.04) μg/mL for B. amyloliquefaciens, L. brevis, and S. bombicola, respectively. Developing a value-added fermented blueberry product will help circumvent losses because of the highly perishable nature of the fruit.

The role of copper nanoparticles in an etch-and-rinse adhesive on antimicrobial activity, mechanical properties and the durability of resin-dentine interfaces

OBJECTIVES

To evaluate the effect of addition of copper nanoparticles at different concentrations into an etch-and-rinse adhesive (ER) on antimicrobial activity, Knoop microhardness (KHN), in vitro and in situ degree of conversion (DC), as well as the immediate (IM) and 2-year (2Y) resin-dentine bond strength (μTBS) and nanoleakage (NL).

METHODS

Seven experimental ER adhesives were formulated according to the amount of copper nanoparticles incorporated into the adhesives (0 [control], 0.0075 to 1wt.%). We tested the antimicrobial activity of adhesives against Streptococcus mutans using agar diffusion assay after IM and 2Y. The Knoop microhardness and in vitro DC were tested after IM and 2Y. The adhesives were applied to flat occlusal dentine surfaces after acid etching. After resin build-ups, specimens were longitudinally sectioned to obtain beam-like resin-dentine specimens (0.8mm²), which were used for evaluation of μTBS and nanoleakage at the IM and 2Y periods. In situ DC was evaluated at the IM period in these beam-like specimens. Data were submitted to appropriate statistical analyses (α=0.05).

RESULTS

The addition of copper nanoparticles provided antimicrobial activity to the adhesives only in the IM evaluation and slightly reduced the KHN, the in vitro and in situ DC (copper concentrations of 1wt.%). However, KHN increase for all concentrations after 2Y. After 2Y, no significant reductions of μTBS (0.06 to 1% wt.%) and increases of nanoleakage were observed for copper containing adhesives compared to the control group.

CONCLUSION

Copper nanoparticles addition up to 0.5wt.% may provide antimicrobial properties to ER adhesives and prevent the degradation of the adhesive interface, without reducing the mechanical properties of the formulations.

Antibacterial effect of PEO coating with silver on AA7075

In this work, plasma electrolytic oxidation (PEO) coatings were produced on AA7075 using alkaline solution containing silicates compounds and silver micrometric particles in order to give to the coating an antimicrobial effect. In the optic of circular economy, silver chloride derived from the acid pre-treatment of electronic scraps was used as raw material and successively silver powders were synthesized from silver chloride solution using glucose syrup as reducing agent. The coatings were characterized by scanning electron microscope (SEM), X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), potentiodynamic polarization test and antimicrobial tests. The results evidenced that the obtained coatings were homogenous and give to the samples higher corrosion resistance than untreated alloy. The silver particles, found both inside and outside of the pores that characterize the PEO layer, produced an efficacious antimicrobial effect both against E. coli and S. aureus.