Magnetic core-shell ZnFe2O4/ZnS nanocomposites for photocatalytic application under visible light

Novel PDI-NH/PDI-COOH Supramolecular Junction for Enhanced Visible-Light Photocatalytic Phenol Degradation

The development of efficient and environmentally friendly photocatalysts is crucial for addressing global energy and environmental challenges. Perylene diimide, an organic supramolecular material, holds great potential for applications in mineralized phenol. In this study, through the integration of different mass ratios of unmodified perylenimide (PDI-NH) into the self-assembly of amino acid-substituted perylenimide (PDI-COOH), a novel supramolecular organic heterojunction (PDICOOH/PDINH) was fabricated. The ensuing investigation focuses on its visible-light mineralized phenol properties. The results show that the optimal performance is observed with a composite mass fraction of 10%, leading to complete mineralization of 5 mg/L phenol within 5 h. The reaction exhibits one-stage kinetics with rate constants 13.80 and 1.30 times higher than those of PDI-NH and PDI-COOH, respectively. SEM and TEM reveal a heterogeneous interface between PDI-NH and PDI-COOH. Photoelectrochemical and Kelvin probe characterization confirm the generation of a built-in electric field at the interface, which is 1.73 times stronger than that of PDI-COOH. The introduction of PDI-NH promotes π-π stacking of PDI-COOH, while the built-in electric field facilitates efficient charge transfer at the interface, thereby enhancing phenol decomposition. The finding demonstrates that supramolecular heterojunctions have great potential as highly effective photocatalysts for environmental remediation applications.

Unveiling the multifaceted applications of magnetically responsive chitosan capped ZnS QDs for sensing and annihilation of pharmaceutical drugs

The persistence of active pharmaceutical ingredients in water bodies has lead to detrimental impacts on public health as well as deteriorated aquatic resources at breakneck pace. To address this, highly fluorescent chitosan capped ZnS QDs (CZS QDs) were integrated with nickel ferrite nanoparticles (NF NPs) through ultrasonic assisted method to yield a series of magnetically responsive CZS-xNF nanohybrids (x = 5, 10, 15 and 20 wt% of NF). The successful fabrication of nanohybrids were affirmed through various techniques such as Fourier transform infra-red spectroscopy (FT-IR), powder X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS), high resolution transmission electron microscopy (HRTEM), vibrating sample magnetometer (VSM) and diffused reflectance spectroscopy (DRS). The dual applicability of CZS-xNF nanohybrid was witnessed for the detection of pharmaceutical waste by fluorescence sensing and their concomitant annihilation via visible light driven photodegradation reactions. The developed nanohybrid showed exceptional selectivity towards tetracycline antibiotics, with ultra-low limit of detection of 0.53 μM for tetracycline (TC) and 0.30 μM for minocycline (MC), respectively. The fluorescent sensor was also analysed for trace level detection of tetracyclines in real water samples that showed satisfactory recoveries of 90-106%, depicting practical applicability of sensor. Additionally, the excellent photocatalytic features of synthesized nanohybrid prompted their use in photodegradation of TC and MC and a superior photocatalytic performance was achieved in comparison to CZS QDs. The enhanced photocatalytic performance of CZS-xNF nanohybrid can be attributed to type-I charge transfer mechanism, which resulted in efficient charge separation and reduced photo-induced recombination rate of charge carriers. The nanohybrids were recyclable up to four cycles after being utilized in sensing and photocatalysis, thus offering a promising strategy for environmental remediation through synchronized sensing and extirpation of pharmaceutical waste.

Synthesis of magnetic graphene-like carbon nitride-cobalt ferrite (g-C3N4/CoFe2O4) nanocomposite for sonocatalytic remediation of toxic organic dyes

A novel magnetic g-C₃N₄/CoFe₂O₄ nanocomposite was successfully synthesized by a simple hydrothermal method and applied as a new graphene-like carbon nitride-based sonocatalyst for sonodegradation of pollutant dyes. The as-prepared samples were characterized by using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflectance spectroscopy (DRS), BET surface area measurements and photoluminescence (PL) spectroscopy. The results indicate that the nanocomposite sample is composed of spherical CoFe₂O₄ nanoparticles adhered to g-C₃N₄ naosheets. The g-C₃N₄/CoFe₂O₄ nanocomposites were used as a new magnetically separable sonocatalyst in H₂O₂-assisted sonodegradation of methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes in aqueous media. The results showed complete degradation (ca. 100%) of dyes within short times (30-35 min). The sonocatalytic activity of graphitic carbon nitride (g-C₃N₄) was greatly enhanced with CoFe₂O₄ modification. Trapping experiments indicated that the g-C₃N₄/CoFe₂O₄ nanocomposites serves as a generator of hydroxyl radical (˙OH) via activation of H₂O₂ for degradation of dyes under ultrasound irradiation. Furthermore, the magnetic sonocatalyst can be separated from solution by an external magnet and reused several times without observable loss of activity. The possible mechanism of sonocatalytic activity was also proposed according to experimental results.

A Facile Microwave Hydrothermal Synthesis of ZnFe2O4/rGO Nanocomposites for Supercapacitor Electrodes

As a typical binary transition metal oxide, ZnFe₂O₄ has attracted considerable attention for supercapacitor electrodes due to its high theoretical specific capacitance. However, the reported synthesis processes of ZnFe₂O₄ are complicated and ZnFe₂O₄ nanoparticles are easily agglomerated, leading to poor cycle life and unfavorable capacity. Herein, a facile microwave hydrothermal process was used to prepare ZnFe₂O₄/reduced graphene oxide (rGO) nanocomposites in this work. The influence of rGO content on the morphology, structure, and electrochemical performance of ZnFe₂O₄/rGO nanocomposites was systematically investigated. Due to the uniform distribution of ZnFe₂O₄ nanoparticles on the rGO surface and the high specific surface area and rich pore structures, the as-prepared ZnFe₂O₄/rGO electrode with 44.3 wt.% rGO content exhibits a high specific capacitance of 628 F g^-1 and long cycle life of 89% retention over 2500 cycles at 1 A g^-1. This work provides a new process for synthesizing binary transition metal oxide and developing a new strategy for realizing high-performance composites for supercapacitor electrodes.

Rational design of direct Z-scheme magnetic ZnIn2S4/ZnFe2O4 heterojunction toward enhanced photocatalytic wastewater remediation

The rationally designed heterojunction photocatalysts with magnetic semiconductors and easy recyclability have received considerable attention due to their great advantages in practical application. In our work, a series of ZnIn2S4/ZnFe2O4 Z-scheme heterojunction photocatalysts with superior magnetic properties were synthesized by a gentle chemical bath method and utilized for the effective photodegradation and Cr(VI) reduction under irradiation. Systematic evaluation experiments revealed that the derived ZnIn2S4/ZnFe2O4 photocatalysts exhibited enhanced photocatalytic efficiency for RhB degradation and Cr(VI) reduction as compared with pristine ZnIn2S4 and ZnFe2O4, which was primarily due to the close contact interface and the formation of Z - scheme charge transfer mechanism between ZnFe2O4 rods and ZnIn2S4 nanosheets. Moreover, the as-synthesized photocatalyst could be easily recycled with a remarkable photocatalytic performance because of its magnetic separation characteristic. The present work opens up a vast prospect for the design of highly efficient and magnetically separable photocatalysts for environmental remediation.

Construction of a p-n heterojunction based on magnetic Mn0.6Zn0.4Fe2O4 and ZnIn2S4 to improve photocatalytic performance

To improve the photocatalytic performance of Mn_0.6Zn_0.4Fe₂O₄ (MZFO) and ZnIn₂S₄ (ZIS) for organic pollutants, the p-n MZFO@ZIS heterojunctions with different weight percentage (10 ~ 40%) of MZFO are constructed from spent batteries and added indium ion via a green bioleaching and hydrothermal method. Structural, optical, and photocatalytic properties for the heterojunctions are investigated systematically by XRD, FT-IR, SEM-EDX, TEM, BET, VB-XPS, UV-vis DRS, PL, etc. The results confirm that p-n junction significantly improves the visible light adsorption and the separation efficiency of photogenerated carriers. Specifically, MZFO-25%@ZIS shows the highest photodegradation performance toward Congo red (CR), and its reactive kinetic constant is about 9.6, 7.8, and 7.0 times higher than that of P25 TiO₂, MZFO, and ZIS, respectively, and MZFO-25%@ZIS still possesses a high reusability and simple magnetic separation after 5 cycles of reuse. The radical trapping experiments and electronic paramagnetic resonance (EPR) tests show that ·O₂^-, ·OH, and h⁺ are the most important active substance for degrading CR. The pathways for the CR degradation are further proposed based on the intermediate analysis. DFT + U calculations confirm that the high charge density of Zn-O, Fe-O, and Zn-S bonds in the MZFO and ZIS molecules provides the electrons for the sufficient production of free radicals. This work also provides a novel high value-added strategy for the green utilization of spent batteries.

Chlorophyll sensitized and salicylic acid functionalized TiO2 nanoparticles as a stable and efficient catalyst for the photocatalytic degradation of ciprofloxacin with visible light

Developing efficient and stable visible light active photocatalyst has significant environmental applications. Though dye sensitization of TiO₂ nanoparticles with natural chlorophyll pigments can potentially impart visible light activity, their long-term stability is a major concern. We investigated the functionalization of TiO₂ with salicylic acid, and subsequent sensitization with chlorophylls to improve the catalyst stability for the photocatalytic degradation of Ciprofloxacin (CPX) under visible light. A significant improvement in the degradation efficiency and catalyst stability was observed for five reuse cycles. Further, an optimum CPX degradation of ∼75% was achieved with 0.75 g L^-1 catalyst dosage of 0.1 chl/0.1 SA-TiO₂, initial pH of 6, and 10 ppm of initial CPX for a visible light exposure of 2 h. The degradation followed the pseudo-second-order kinetics. In addition, the ciprofloxacin degradation was reduced in the wastewater matrix system due to the presence of other scavenging species such as chlorides, sulphates, and alkalinity. Significant reduction in the toxicity of degradation compounds after the photocatalytic degradation was observed in comparison to parent CPX. Further, the degradation pathway and plausible mechanism of degradation of CPX were also proposed.

Chiral recognition of tryptophan enantiomers with UV-Vis spectrophotometry approach by using L-cysteine modified ZnFe2O4 nanoparticles in the presence of Cu2

Amino acids play a very important role in the fields of pharmacy and biochemistry, and the identification of amino acid enantiomers has become a research hotspot. In this study, chiral nanomaterials ZnFe₂O₄-L-Cys (Cys = cysteine) were prepared by the mechanical stirring method and characterizad by different kinds of techniques. The effect of pH and Cu²⁺ on the recognition of tryptophan by chiral nanomaterials ZnFe₂O₄-L-Cys was further explored by ultraviolet-visible spectroscopy. The experimental results show that when the pH of the recognition environment is neutral, ZnFe₂O₄-L-Cys can be used as chiral selectors for tryptophan enantiomers in the presence of Cu²⁺ and the absorbance of L-Trp is always stronger than D-Trp within a certain concentration range, which provides a novel and convenient way for the chiral recognition of tryptophan enantiomers.

Structural, optical and photocatalytic properties of magnetic recoverable Mn0.6Zn0.4Fe2O4@Zn0.9Mn0.1O heterojunction prepared from waste Mn-Zn batteries

Green, simple and high value-adding technology is crucial for realizing waste batteries recycling. In this work, the magnetically recyclable Mn_0.6Zn_0.4Fe₂O₄@Zn_0.9Mn_0.1O (MZFO@ZMO) heterojunctions are prepared from waste Mn-Zn batteries via a green bioleaching and sample co-precipitation method. The as-prepared catalysts with different Zn_0.9Mn_0.1O weight percentage (25%, 50% and 75%) have been comprehensively characterized in structure, optics, photoelectrochemistry and photocatalytic activity. Characterization results indicate that MZFO@ZMO heterojunctions with the core-shell structure, demonstrates excellent absorption intensity in the visible light region, outperforming that of individual ZnO and Zn_0.9Mn_0.1O. Especially, the staggered bandgap alignment of Mn_0.6Zn_0.4Fe₂O₄ and Zn_0.9Mn_0.1O greatly enhances electron transfer and charge separation in the binary heterojunction system. The optimized MZFO@50%-ZMO shows the highest photodegradation performance toward methylene blue (MB) under the visible light irradiation, with a 99.7% of photodegradation efficiency of 20 mg L^-1 of MB within 90 min, and its reactive kinetic constants is about 7.2, 10.8 and 21.7 times higher than that of Zn_0.9Mn_0.1O, P25 TiO₂ and Mn_0.6Zn_0.4Fe₂O₄, respectively. The MB photocatalytic mechanism is investigated in the scavenger and 5,5-dimethylpyrroline-N-oxide (DMPO) spin-trapping electron spin resonance (ESR) experiments, and h⁺ and *O₂^- are identified as the major active species for MB degradation. In addition, MZFO@50%-ZMO also exhibits a good reusability and high magnetic separation properties after six successive cycles. This new material indicates the advantages of low costs, simple reuse and great potential in application.

Green synthesis of magnetically recyclable Mn0.6Zn0.4Fe2O4@Zn1-xMnxS composites from spent batteries for visible light photocatalytic degradation of phenol

Magnetic binary heterojunctions are a kind of promising photocatalysts due to their high catalytic activity and easy magnetic separation; however, their synthesis may involve high costs or secondary environmental impacts. In this work, the magnetically recyclable Mn_0.6Zn_0.4Fe₂O₄@Zn_1-xMn_xS (MZFO@Zn_1-xMn_xS, x = 0.00-0.07) photocatalysts are synthesized from spent batteries via a green biocheaching and egg white-assisted hydrothermal method. The as-synthesized photocatalysts have been comprehensively characterized in phase, morphology, texture, optics, photoelectrochemistry and photocatalytic activity. Characterization results indicate that the desired core-shell structure MZFO@Zn_1-xMn_xS composites are successfully synthesized, theirs absorption intensity in the visible light region is greatly enhanced compared to Zn_1-xMn_xS. In addition, doped Mn²⁺ in ZnS host lattice and the staggered bandgap alignment of MZFO and Zn_1-xMn_xS greatly enhances electron transfer and charge separation in the binary heterojunction system. The optimized MZFO@Zn_0.95Mn_0.05S shows the highest photodegradation performance toward phenol under the visible light irradiation, with a complete degradation of 25 mg L^-1 of phenol within 120 min, and its reactive kinetic constants is about 5.2 and 13.3 times higher than that of pure Zn_0.95Mn_0.05S and MZFO, respectively. Furthermore, the mechanism and pathways for the degradation of phenol are proposed. In addition, MZFO@Zn_0.95Mn_0.05S also exhibits a good reusability and high magnetic separation properties after 5 successive cycles. This new material has the advantages of low costs, simple reuse and great potential in application.

Fabrication of Z-scheme magnetic MoS2/CoFe2O4 nanocomposites with highly efficient photocatalytic activity

MoS₂ thin nanosheets decorated with CoFe₂O₄ nanoparticles have been successfully synthesized via a simple hydrothermal method. The nanocomposites are characterized by XRD, TEM, HRTEM, BET, XPS, UV-Vis DRS, PL and magnetic property analysis. The Z-scheme mechanism at the interface of MoS₂ and CoFe₂O₄ is formed. When the mass ratio of MoS₂ and CoFe₂O₄ is 1:3, the MoS₂/CoFe₂O₄ nanocomposites present excellent photocatalytic performance. The degradation rate of rhodamine B (RhB) and congo red (CR) is 93.80% and 94.43% in 90 and 50 min, respectively, under visible light irradiation. The highly photocatalytic activity could be mainly ascribed to the formed Z-scheme mechanism which facilitates the separation of photoinduced electron-hole pairs. Besides, the MoS₂ thin nanosheets not only provide the most active sites for photocatalytic reactions, but also act as the backing material for CoFe₂O₄ nanoparticles to effectively disperse and avoid the magnetic aggregation. Moreover, the MoS₂/CoFe₂O₄ nanocomposites present a good recyclability and the degradation rate of RhB and CR is still beyond 82% after seven runs. In addition, the nanocomposites can be easily separated by an external magnet.

A core–shell metal–organic-framework (MOF)-based smart nanocomposite for efficient NIR/H2O2-responsive photodynamic therapy against hypoxic tumor cells

In this work, core–shell MOF-based smart nanocomposite UCNPs/MB@ZIF-8@catalase has been constructed for bio-imaging and efficient NIR/H₂O₂-responsive photodynamic therapy against hypoxic tumor cells.