Electrochemical performance of 2D polyaniline anchored CuS/Graphene nano-active composite as anode material for lithium-ion battery

A novel hollow flower shaped Cu9S8 antibacterial agent for removing sulfonamide in water environment: effects of composite with magnetic biochar, differential adsorption, and mechanism study

In this study, hollow nanoflower spherical Cu9S8 and Cu9S8/Fe3O4@BC with adsorption and antibacterial properties was prepared by coprecipitation and solvothermal method, respectively. The adsorption results showed that the Cu9S8 exhibited excellent adsorption performance on sulfonamide antibiotics (SAs), especially for sulfamethoxazole (SMZ). The optimal addition amount of Cu9S8 is 0.2 g, which results in a maximum adsorption capacity of 33.4 mg/g for SMZ within 120 min. The fitting results of adsorption and desorption kinetics and thermodynamics, as well as the conditions such as pH value and ionic strength were compared. It was found that different interactions led to the differential adsorption of SAs by Cu9S8. The desorption experiment further elucidated its adsorption mechanism. The large desorption capacity indicates that SAs on Cu9S8 can be further recovered and treated. The auto-deposition characteristics of Cu9S8 and the hysteresis loop of Cu9S8/Fe3O4@BC were studied to effectively recover Cu9S8 from aquatic environments. Additionally, more than 99% of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) were exterminated by Cu9S8 and Cu9S8/Fe3O4@BC within 20 min. The above results suggested that the hollow nanoflower spherical Cu9S8 and Cu9S8/Fe3O4@BC composite materials can provide a new strategy for solving pollution problems and waste treatment.

Carboxymethyl cellulose-based photothermal film: A sustainable packaging with high barrier and tensile strength for food long-term antibacterial protection

Traditional packaging materials feed the growing global food protection. However, these packaging materials are not conducive to environment and have not the ability to kill bacteria. Herein, a green and simple strategy is reported for food packaging protection and long-term antibacterial using carboxymethylcellulose-based photothermal film (CMC@CuS NPs/PVA) that consists of carboxymethyl cellulose (CMC) immobilized copper sulfide nanoparticles (CuS NPs) and polyvinyl alcohol (PVA). With satisfied oxygen transmittance (0.03 cc/m2/day) and water vapor transmittance (163.3 g/m2/day), the tensile strength, tear strength and burst strength reached to 3401.2 N/m, 845.7 mN and 363.6 kPa, respectively, which could lift 4.5 L of water. The composite film had excellent photothermal conversion efficiency and photothermal stability. Under the irradiation of near infrared (NIR), it can rapidly heated up to 197 °C within 25 s. The antibacterial analysis showed that the inhibition rate of composite film against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) could all reach >99 %. Furthermore, the synthesized CuS NPs was well immobilized and the residual rate of copper kept 98.7 % after 10 days. Noticeably, the composite film can preserve freshness of strawberries for up to 6 days. Therefore, the composite film has potential application for food antibacterial protection.

Codelivery of CuS and DOX into Deep Tumors with Size and Charge-Switchable PAMAM Dendrimers for Chemo-photothermal Therapy

Accurate targeting of therapeutic agents to specific tumor tissues, especially via deep tumor penetration, has been an effective strategy in cancer treatments. Here, we described a flexible nanoplatform, pH-responsive zwitterionic acylsulfonamide betaine-functionalized fourth-generation PAMAM dendrimers (G4-AB), which presented multiple advantages for chemo-photothermal therapy, including template synthesis of ultrasmall copper sulfide (CuS) nanoparticles and further encapsulation of doxorubicin (DOX) (G4-AB-DOX/CuS), long-circulating performance by a relatively large size and zwitterionic surface in a physiological environment, combined size shrinkage, and charge conversions via pH-responsive behavior in an acidic tumor microenvironment (TME). Accordingly, high tumor penetration and positive cell uptake for CuS and DOX have been determined, which triggered an excellent combination treatment under near-infrared irradiation in comparison to the monochemotherapy system and irresponsive chemo-photothermal system. Our study represented great promise in constructing multifunctional carriers for the effective delivery of photothermal nanoparticles and drugs in chemo-photothermal therapy.

2D/2D Cs0.32 WO3 /CuS Nano-Heterojunctions for Simultaneous High-Efficiency Solar Desalination, Photocatalytic Decontamination, and Electricity Generation

Desalination and power generation through solar energy harvesting is a crucial technology that can effectively address freshwater shortages and energy crises. However, owing to the complexity of the actual water environment, the thermal output capability of the photothermal material and the functional integration of the evaporation system need urgent improvement, to obtain high-quality fresh water and sufficient electricity. Herein, a 2D/2D cesium tungsten bronze/copper sulfide (2D/2D Cs0.32 WO3 /CuS) nano-heterojunction is developed and it is loaded into a cellulose-based hybrid hydrogel to construct a multifunctional evaporator. Benefiting from the more nonradiative recombination centers from deep-level defects, as well as shorter carrier migration distances and higher redox potentials in the Cs0.32 WO3 /CuS nano-heterojunction, this evaporator has a significant improvement in thermal output capacity, enabling both super-efficient seawater evaporation (4.22 kg m-2 h-1 ) and photodegradation of organic pollutants (removal rate ≈ 99%). Moreover, the evaporator exhibits long-term stability and sustainable self-cleaning property against salt accumulation. Remarkably, the thermoelectric module based on the Cs0.32 WO3 /CuS nano-heterojunction shows promising electricity generation performance (4.85 W m-2 ), which can power small appliances durably and stably, exceeding previously reported similar devices. This 2D/2D heterojunction-based solar evaporation system will provide a more reliable solution for efficient and sustainable freshwater-electricity co-generation in resource-limited areas.

Development of hierarchical copper sulfide-carbon nanotube (CuS-CNT) composites and utilization of their superior carrier mobility in efficient charge transport towards photodegradation of Rhodamine B under visible light

In this work, the synthesis of visible light sensitive copper sulfide (CuS) nanoparticles and their composites with carbon nanotubes (T-CuS) via a solvothermal technique is reported. The synthesized nanoparticles (NPs) and their composites were significantly characterized by powder X-ray diffraction (PXRD), scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis spectroscopy, photoluminescence (PL) spectroscopy and thermogravimetric analysis (TGA). The effect of carbon nanotubes (CNTs) on the crystallinity, microstructures, photo-absorption, photo-excitation, thermal stability and surface area of CuS was investigated. The current-voltage (I vs. V) characteristics of both CuS and T-CuS based Schottky diodes were measured to determine the charge transport parameters like photosensitivity, conductivity, mobility of charge carriers, and transit time. The photocatalytic performance of bare CuS and T-CuS in the decomposition of Rhodamine B dye was studied using a solar simulator. The T-CuS composite showed higher photocatalytic activity (94%) compared to bare CuS (58%). The significance of charge carrier mobility in transferring photo-induced charges (holes and electrons) through complex networks of composites and facilitating the photodegradation process is explained. Finally, the reactive species responsible for the Rhodamine B degradation were also identified.

CuSe2 Nanocubes Enabling Efficient Sodium Storage

As the most promising candidate for lithium-ion batteries (LIBs), the electrochemical performance of sodium-ion batteries (SIBs) is highly dependent on the electrode materials. Copper selenides have established themselves as potential anode materials for SIBs due to their high theoretical capacity and good conductivity. However, the poor rate performance and fast capacity fading are the major challenges to their practical application in SIBs. Herein, single-crystalline CuSe₂ nanocubes (CuSe₂ NCs) are successfully synthesized via a solvothermal method. As an anode of SIBs, the CuSe₂ NCs render an almost 100% initial Coulombic efficiency, an outstanding long cycle life, e.g., 380 mA h g^-1 after 1700 cycles at 10 A g^-1, and an unprecedented rate performance of 344 mA h g^-1 at 50 A g^-1. Ex situ X-ray diffraction (XRD) patterns reveal the crystalline transformation of energy-storage materials, and the density functional theory (DFT) conclusion suggests that fast and stable ion diffusion kinetics enhances their electrochemical performance upon sodiation/desodiaton. The investigation into the mechanism provides a theoretical basis for subsequent practical applications.

Vacancy engineering in Co-doped CuS1-x with fast Electronic/Ionic migration kinetics for efficient Lithium-Ion batteries

Slow Li ion diffusion kinetics and disordered migration of electrons are two most crucial obstacles to be resolved in electrode material design for higher rate capability of Li-ion batteries. Herein, the Co-doped CuS_1-x with abundant high active S vacancies is proposed to accelerate the electronic and ionic diffusion during the energy conversion process, because contraction of Co-S bond can cause the expansion of atomic layer spacing, thus promoting the Li ion diffusion and directional electron migration parallel to the Cu₂S₂ plane, and also induce the increasing of active sites to improve the Li⁺ adsorption and electrocatalytic conversion kinetics. Especially, the electrocatalytic studies and plane charge density difference simulations demonstrate that electron transfer near the Co site is more frequent, which is conducive to more rapid energy conversion and storage. Those S vacancies formed by Co-S contraction in CuS_1-x structure obviously increase Li ion adsorption energy in Co-doped CuS_1-x to 2.21 eV, higher than the 2.1 eV for CuS_1-x and 1.88 eV for CuS. Taking these advantages, the Co-doped CuS_1-x as anode of Li-ion batterie shows an impressive rate capability of 1309 mAh·g^-1 at 1A g^-1, and long cycling stability (retaining 1064 mAh·g^-1 capacity after 500 cycles). This work provides new opportunities for the design of high-performance electrode material for rechargeable metal-ion batteries.

Emerging 2D Copper-Based Materials for Energy Storage and Conversion: A Review and Perspective

2D materials have shown great potential as electrode materials that determine the performance of a range of electrochemical energy technologies. Among these, 2D copper-based materials, such as Cu-O, Cu-S, Cu-Se, Cu-N, and Cu-P, have attracted tremendous research interest, because of the combination of remarkable properties, such as low cost, excellent chemical stability, facile fabrication, and significant electrochemical properties. Herein, the recent advances in the emerging 2D copper-based materials are summarized. A brief summary of the crystal structures and synthetic methods is started, and innovative strategies for improving electrochemical performances of 2D copper-based materials are described in detail through defect engineering, heterostructure construction, and surface functionalization. Furthermore, their state-of-the-art applications in electrochemical energy storage including supercapacitors (SCs), alkali (Li, Na, and K)-ion batteries, multivalent metal (Mg and Al)-ion batteries, and hybrid Mg/Li-ion batteries are described. In addition, the electrocatalysis applications of 2D copper-based materials in metal-air batteries, water-splitting, and CO₂ reduction reaction (CO₂ RR) are also discussed. This review also discusses the charge storage mechanisms of 2D copper-based materials by various advanced characterization techniques. The review with a perspective of the current challenges and research outlook of such 2D copper-based materials for high-performance energy storage and conversion applications is concluded.

Reduced Graphene Oxide-Wrapped Novel CoIn2S4 Spinel Composite Anode Materials for Li-ion Batteries

In this study, we proposed a novel CoIn₂S₄/reduced graphene oxide (CoIn₂S₄/rGO) composite anode using a hydrothermal method. By introducing electronic-conductive reduced graphene oxide (rGO) to buffer the extreme volume expansion of CoIn₂S₄, we prevented its polysulfide dissolution during the lithiation/de-lithiation processes. After 100 cycles, the pristine CoIn₂S₄ electrode demonstrated poor cycle performance of only 120 mAh/g at a current density of 0.1 A/g. However, the composition-optimized CoIn₂S₄/rGO composite anode demonstrated a reversible capacity of 580 mAh/g for 100 cycles, which was an improvement of 4.83 times. In addition, the ex situ XRD measurements of the CoIn₂S₄/rGO electrode were conducted to determine the reaction mechanism and electrochemical behavior. These results suggest that the as-synthesized CoIn₂S₄/rGO composite anode is a promising anode material for lithium ion batteries.

A core/shell nanogenerator achieving pH-responsive nitric oxide release for treatment of infected diabetic wounds

Nitric oxide is critical for eliminating infection and promoting regeneration in diabetic wounds. However, clinical uses of nitric oxide are limited by its high activity and lack of specificity in targeting infections. Herein, we develop an intelligent nitric oxide nanogenerator comprising isosorbide dinitrate (ISDN)-coated copper sulfide (CuS)/calcium carbonate (CaCO₃) core/shell nanoparticles (CuS@CaCO₃-ISDN) to target the acidic microenvironment of the infected diabetic wounds. Meaningfully, triggered by acid decomposition of CaCO₃, this nanogenerator can achieve a responsive and accelerated release of nitric oxide from ISDN through enzyme-mimicking redox processes that involve CuS nanoparticles and then inactivate biofilm bacteria through the pathways of oxidative stress and disruption of adenosine triphosphate (ATP)-related energy metabolism. Moreover, after eliminating the infection, the pH-responsive release of nitric oxide can promote the proliferation of blood vessels and tissue regeneration and accelerate diabetic wound closure. This study expands the use of nitric oxide donors in wound treatment by developing the enzyme-mimicking release strategy, and the pH-responsive core/shell nanogenerator is promising for a variety of anti-infection therapeutic applications.

Synthesis, Characterization, and Antibacterial Potential of Poly(o-anisidine)/BaSO4 Nanocomposites with Enhanced Electrical Conductivity

The poly(o-anisidine)/BaSO4 nanocomposites were prepared by oxidative polymerization of o-anisidine monomer with BaSO4 filler for the potential antibacterial properties of the composite materials. To achieve the optimal and tunable properties of the nanocomposites, the ratio of BaSO4 filler was changed at the rates of 1%, 3%, 5%, 7%, and 10% with respect to matrix. Different analytical techniques, i.e., FTIR and UV-visible spectroscopy, were employed for functional identification and optical absorption of the poly(o-anisidine)/BaSO4 nanocomposites. The FTIR data revealed the significant interaction between POA and BaSO4, as well as the good absorption behavior of the UV-visible spectra. The conducting properties were controllable by varying the load percentage of the BaSO4 filler. Furthermore, different bacterial strains, i.e., Pseudomonas aeruginosa (Gram-negative) and Staphylococcus aureus (Gram-positive), were used to evaluate the antibacterial activity of the POA/BaSO4 nanocomposites. The largest zones of inhibition 0.8 and 0.9 mm were reached using 7% and 10% for Staphylococcus aureus and Pseudomonas aeruginosa, respectively.

NIR-regulated dual-functional silica nanoplatform for infected-wound therapy via synergistic sterilization and anti-oxidation

Nature-derived bioactive components and photothermal synergistic therapy bring potential strategies for fighting bacterial infection and accelerating would healing by virtue of their excellent therapeutic efficiencies and ignorable side effects, where photothermal property not only acts as sterilization energy but also as a doorkeeper to control the natural component release. Herein, by integrating the excellent antibacterial property of cinnamaldehyde (CA) and the outstanding photothermal performance of copper sulfide nanoparticles (CuS NPs), a multifunctional nanoplatform of SiO₂ @CA@CuS nanospheres (NSs) is constructed with silica nanosphere (SiO₂ NSs) as carrier. SiO₂ @CA@CuS NSs exhibit photothermal property, bacterial absorption capacity, extraordinary antibacterial activity and antioxidant property. Mechanism characteriazation and antibacterial experiment indicate that positive charged SiO₂ @CA@CuS can adhere to the negative charged surface of bacteria, and quickly kill bacteria through the synergistic action of the released CA and heat produced under near infrared light (NIR) irradiation at 980 nm. The sterilization efficiencies for Escherichia coli (E. coli) and S. aureus reach 99.86% and 99.84%, respectively. Furthermore, NIR-regulated SiO₂ @CA@CuS perform great biocompatibility, as well as effective effects for accelerating S. aureus-infected wound healing at a low photothermal temperature (45 °C) relying on synergistic sterilization and anti-oxidation.

An insight into the sodium-ion and lithium-ion storage properties of CuS/graphitic carbon nitride nanocomposite

Metal sulfides are gaining prominence as conversion anode materials for lithium/sodium ion batteries due to their higher specific capacities but suffers from low stability and reversibility issues. In this work, the electrochemical properties of CuS anode material has been successfully enhanced by its composite formation using graphitic carbon nitride (g-C3N4). The CuS nanoparticles are distributed evenly in the exfoliated g-C3N4 matrix rendering higher electronic conductivity and space for volume alterations during the repeated discharge/charge cycles. The 0.8CuS:0.2g-C3N4 composite when used as an anode for lithium ion coin cell exhibits a reversible capacity of 478.4 mA h g-1 at a current rate of 2.0 A g-1 after a run of 1000 cycles which is better than that reported for CuS composites with any other carbon-based matrix. The performance is equally impressive when 0.8CuS:0.2g-C3N4 composite is used as an anode in a sodium ion coin cell and a reversible capacity of 408 mA h g-1 is obtained at a current rate of 2.0 A g-1 after a run of 800 cycles. A sodium ion full cell with NVP cathode and 0.8CuS:0.2g-C3N4 composite anode has been fabricated and cycled for 100 runs at a current rate of 0.1 A g-1. It can be inferred that the g-C3N4 matrix improves the ion transfer properties, alleviates the volume alteration happening in the anode during the discharge/charge process and also helps in preventing the leaching of polysulfides generated during the electrochemical process.

Simplified Route for Deposition of Binary and Ternary Bismuth Sulphide Thin Films for Solar Cell Applications

For photovoltaic applications, undoped and Ni2+ doped Bi2S3 thin films were chemically deposited onto glass substrates at room temperature. Elemental diffraction analysis confirmed the successful Ni2+ incorporation in the range of 1.0 to 2.0 at. %, while X-ray Diffraction analysis revealed that orthorhombic crystal lattice of Bi2S3 was conserved while transferring from binary to ternary phase. Scanning electron microscopy images reported homogeneous and crack-free morphology of the obtained films. Optoelectronic analysis revealed that the bandgap value was shifted from 1.7 to 1.1 eV. Ni2+ incorporation also improved the carrier concentration, leading to higher electrical conductivity. Resultant optoelectronic behavior of ternary Bi2−x NixS3 thin films suggests that doping is proved to be an effectual tool to optimize the photovoltaic response of Bi2S3 for solar cell applications.

Designing a novel visible-light-driven heterostructure Ni-ZnO/S-g-C3N4 photocatalyst for coloured pollutant degradation

In this study, photocorrosion of ZnO is inhibited by doping Ni in the ZnO nanostructure and electron-hole recombination was solved by forming a heterostructure with S-g-C3N4. Ni is doped into ZnO NPs from 0 to 10% (w/w). Among the Ni-decorated ZnO NPs, 4% Ni-doped ZnO NPs (4NZO) showed the best performance. So, 4% Ni-ZnO was used to form heterostructure NCs with S-g-C3N4. NZO NPs were formed by the wet co-precipitation route by varying the weight percentage of Ni (0-10% w/w). Methylene blue (MB) was used as a model dye for photocatalytic studies. For the preparation of the 4NZO-x-SCN nanocomposite, 4NZO NPs were formed in situ in the presence of various concentrations of S-g-C3N4 (10-50% (w/w)) by using the coprecipitation route. The electron spin resonance (ESR) and radical scavenger studies showed that O2 - and OH free radicals were the main reactive species that were responsible for MB photodegradation.

A surface-engineering-assisted method to synthesize recycled silicon-based anodes with a uniform carbon shell-protective layer for lithium-ion batteries

Yolk-shell silicon/carbon composite encapsulated by uniform carbon shell (Si@C) are becoming an effective method to mitigate volume-related issues of Si-based anodes and maintain an excellent performance for lithium-ion batteries (LIBs). However, a uniform carbon shell in Si@C is difficult to guarantee. Herein, a facile surface-engineering-assisted strategy is described to prepare Si@C composite with low-cost modified recycled waste silicon powders (RWSi) as core coated by a uniform carbon shell-protective layer derived from the pyrolysis of poly (methyl methacrylate) (PMMA) as carbon source (m-RWSi@PMMA-C). In this process, surface-engineering is performed with silane coupling agent kh550 to functionalize the RWSi particles via a silanization reaction, guaranteeing a uniform PMMA coating which will be transformed into carbon shell-protective layer after carbonization. The m-RWSi@PMMA-C electrode delivers an optimal discharge capacity of 1083 mAhg^-1 at 200 mAg^-1 after 200 cycles with an initial capacity of 3176.2 mAhg^-1 and a high initial Coulombic efficiency (ICE) of 75.6%. Based on these results, the recycled silicon-based anode with a uniform carbon shell-protective layer displays great application potential and it also brings a new perspective on silicon-based anodes via surface-engineering method for LIBs.

3D Hierarchical Nanocrystalline CuS Cathode for Lithium Batteries

Conductive and flexible CuS films with unique hierarchical nanocrystalline branches directly grown on three-dimensional (3D) porous Cu foam were fabricated using an easy and facile solution processing method without a binder and conductive agent for the first time. The synthesis procedure is quick and does not require complex routes. The structure and morphology of the as-deposited CuS/Cu films were characterized by X-ray diffraction and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy and transmission electron spectroscopy, respectively. Pure crystalline hexagonal structured CuS without impurities were obtained for the most saturated S solution. Electrochemical testing of CuS/Cu foam electrodes showed a reasonable capacity of 450 mAh·g⁻¹ at 0.1 C and excellent cyclability, which might be attributed to the unique 3D structure of the current collector and hierarchical nanocrystalline branches that provide fast diffusion and a large surface area.

One-Pot Synthesis and High Electrochemical Performance of CuS/Cu1.8S Nanocomposites as Anodes for Lithium-Ion Batteries

CuS and Cu_1.8S have been investigated respectively as anodes of lithium-ion batteries because of their abundant resources, no environment pollution, good electrical conductivity, and a stable discharge voltage plateau. In this work, CuS/Cu_1.8S nanocomposites were firstly prepared simultaneously by the one-pot synthesis method at a relatively higher reaction temperature 200 °C. The CuS/Cu_1.8S nanocomposites anodes exhibited a high initial discharge capacity, an excellent reversible rate capability, and remarkable cycle stability at a high current density, which could be due to the nano-size of the CuS/Cu_1.8S nanocomposites and the assistance of Cu_1.8S. The high electrochemical performance of the CuS/Cu_1.8S nanocomposites indicated that the Cu_xS nanomaterials will be a potential lithium-ion battery anode.

Modified QuEChERS extraction method followed by simultaneous quantitation of nine multi-class pesticides in human blood and urine by using GC-MS

Organophosphate, carbamate and pyrethroid pesticides are the most common insecticides used worldwide. They may cause chronic poisoning in farmers and acute poisoning in homicidal or suicidal cases. The determination of trace levels of these pesticides in human blood and urine is very challenging. This study focuses on a simultaneous quantitation method that was developed and validated for multi-class nine pesticides belonging to organophosphate, carbamate and pyrethroid classes in human blood and urine. Target pesticides were extracted from blood and urine using a modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) extraction method. Capillary column DB-35 ms (15 m × 0.25 mm, 0.25 µm) was used for chromatography with a 0.079 ml/min flow rate of carrier gas at constant pressure mode. Quantitation of sulfotep, phorate, carbofuran, chlorpyriphos, profenophos, triazophos, pyriproxyfen, lambda-cyhalothrin and permethrin was performed by mass spectrometer equipped with electron impact ionization source using selected ion monitoring (SIM) mode. The lower and upper limits of quantitation for all nine pesticides were 0.01 mg/L and 2.0 mg/dL respectively. The proposed method was proved to be simple, fast, sensitive, and robust. It has been applied to the analysis of 9 pesticides samples.

Designing novel morphologies of l-cysteine surface capped 2D covellite (CuS) nanoplates to study the effect of CuS morphologies on dye degradation rate under visible light

Novel CuS@l-Cys NPs are designed by a hydrothermal route. The effects of synthetic parameters on the morphologies of CuS@l-Cys NPs were investigated. CuS@l-Cys NPs exhibit an enhanced dye degradation rate under visible light.

MOF-Derived CuS@Cu-BTC Composites as High-Performance Anodes for Lithium-Ion Batteries

The CuS(x wt%)@Cu-BTC (BTC = 1,3,5-benzenetricarboxylate; x = 3, 10, 33, 58, 70, 99.9) materials are synthesized by a facile sulfidation reaction. The composites are composed of octahedral Cu₃ (BTC)₂ ·(H₂ O)₃ (Cu-BTC) with a large specific surface area and CuS with a high conductivity. The as-prepared CuS@Cu-BTC products are first applied as the anodes of lithium-ion batteries (LIBs). The synergistic effect between Cu-BTC and CuS components can not only accommodate the volume change and stress relaxation of electrodes but also facilitate the fast transport of Li ions. Thus, it can greatly suppress the transformation process from Li₂ S to polysulfides by improving the reversibility of the conversion reaction. Benefiting from the unique structural features, the optimal CuS(70 wt%)@Cu-BTC sample exhibits a remarkably improved electrochemical performance, showing an over-theoretical capacity up to 1609 mAh g^-1 after 200 cycles (100 mA g^-1 ) with an excellent rate-capability of ≈490 mAh g^-1 at 1000 mA g^-1 . The outstanding LIB properties indicate that the CuS(70 wt%)@Cu-BTC sample is a highly desirable electrode material candidate for high-performance LIBs.

Electrochemical study of specially designed graphene-Fe3O4-polyaniline nanocomposite as a high-performance anode for lithium-ion battery

In this work, an anode material with improved thermal stability, charge capacity, charge capacity retention, energy density, cyclic performance, operation safety, reversible capacity, and rate capability was synthesized for battery applications. The graphene-magnetite-polyaniline (Gr-Fe3O4-PANI) nanocomposites (NCs) are believed to deliver outstanding performance owing to the collective effect of the layered graphene (Gr) and magnetite (Fe3O4) hollow rods (HRs), as well as the better conductivity of polyaniline (PANI). The Gr-Fe3O4-PANI NCs easily enable the insertion and deinsertion of Li+, the passage of ions in the electrode, fast kinetics of Li+, and low volume expansion. Gr-Fe3O4-PANI NC was prepared by polymerizing aniline in the presence of already prepared Fe3O4 HRs, then dispersing in Gr. Fe3O4 HRs were synthesized by a hydrothermal route. Electrochemical properties were investigated by galvanostatic charge-discharge analysis and cyclic voltammetry. A lithium-ion battery (LIB) based on the Gr-Fe3O4-PANI exhibited a superior reversible current capacity of 1214 mA h g-1, excellent power capability, low volume expansion, high cycling stability and 99.6% coulombic efficiency over 250 cycles.

Facile fabrication of CuS microflower as a highly durable sodium-ion battery anode

CuS micro-flower was synthesized by dealloying and adopted as an anode in SIB with high rate and stable cycle performances.

Preparation and characterization of flexible lithium iron phosphate/graphene/cellulose electrode for lithium ion batteries

In this work, a free-standing flexible composite electrode was prepared by vacuum filtration method with LiFePO₄, graphene and nanofibrillated cellulose (NFC). Compared with the pure LiFePO₄ electrode, the resulting flexible composite (LiFePO₄/graphene/NFC) electrode showed excellent mechanical flexibility, and possessed an enhanced initial discharge capacity of 151 mA h/g (0.1 C) and a good capacity retention rate with only 5% loss after 60 cycles due to suitable electrolyte wettability at the interface. Furthermore, the NFC and graphene formed a three-dimensional conductive framework, which provided high-speed electron conduction in the composite and reduced electrode polarization during charging-discharging processes. Moreover, the composite electrode could endure bending tests up to 1000 times, highlighting preferable mechanical strength and durability. These results demonstrated that the as-fabricated electrodes could be applied as flexible electrodes with an embedded power supply.