Novel molecularly imprinted polymer based on β-cyclodextrin@graphene oxide: Synthesis and application for selective diphenylamine determination

Molecularly Imprinted Electrochemical Sensor Based on α-Cyclodextrin Inclusion Complex and MXene Modification for Highly Sensitive and Selective Detection of Alkylresorcinols in Whole Wheat Foods

Authenticating whole wheat foods poses a significant challenge for both the grain industry and consumers. Alkylresorcinols (ARs), serving as biomarkers of whole wheat, play a crucial role in assessing the authenticity of whole wheat foods. Herein, we introduce a novel molecularly imprinted electrochemical sensor with modifications involving a molecularly imprinted polymer (MIP) and MXene nanosheets, enabling highly sensitive and selective detection of ARs. Notably, we specifically chose 5-heneicosylresorcinol (AR21), the predominant homologue in whole wheat, as the template molecule. α-Cyclodextrin and acrylamide served as dual functional monomers, establishing a robust multiple interaction between the MIP and AR21. As a result, the sensor exhibited a wide linear range of 0.005 to 100 μg·mL-1 and a low detection limit of 2.52 ng·mL-1, demonstrating exceptional selectivity and stability. When applied to commercial whole wheat foods, the assay achieved satisfactory recoveries and accuracy, strongly validating the practicality and effectiveness of this analytical technique.

Voltammetric nano-molar range quantification of agrochemical pesticide using needle-like strontium pyrophosphate embedded on sulfur doped graphitic carbon nitride electrocatalyst

The development of a viable sensor for agrochemical pesticides requires the assessment of trace levels. To achieve this, we developed a diphenylamine (DPA) sensor using needle-like strontium pyrophosphate embedded in sulfur-doped graphitic carbon nitride (SrPO/SCN). We obtained needle-like SrPO/SCN nanocomposite through co-precipitation followed by ultrasonication. The formation of the SrPO/SCN nanocomposite was verified through FT-IR, XRD, XPS, SEM-EDX, and HR-TEM analyses. Additionally, we explored their electrochemical behavior towards DPA using differential pulse voltammetry (DPV) and cyclic voltammetry (CV). The SrPO/SCN nanocomposite-modified electrode exhibited a higher anodic peak current (15.47 µA) than those of the other modified and unmodified electrodes. Under optimal experimental conditions, SrPO/SCN/GCE demonstrated a good limit of detection (0.009 µmol/L), dynamic linear range (0.05-98 µmol/L), and sensitivity (0.36 µAµM-1cm-2). Furthermore, the developed sensor exhibited excellent reproducibility, selectivity, and stability, and successfully detected DPA in real samples, including pear and apple samples, with good recoveries.

Assessing the greenification potential of cyclodextrin-based molecularly imprinted polymers for pesticides detection

Cyclodextrins, with their unparalleled attributes of eco-friendliness, natural abundance, versatile utility, and facile functionalization, make a paramount contribution to the field of molecular imprinting. Leveraging the unique properties of cyclodextrins in molecularly imprinted polymers synthesis has revolutionized the performance of molecularly imprinted polymers, resulting in enhanced adsorption selectivity, capacity, and rapid extraction of pesticides, while also circumventing conventional limitations. As the concern for food quality and safety continues to grow, the need for standard analytical methods to detect pesticides in food and environmental samples has become paramount. Cyclodextrins, being non-toxic and biodegradable, present an attractive option for greener reagents in imprinting polymers that can also ensure environmental safety post-application. This review provides a comprehensive summary of the significance of cyclodextrins in molecular imprinting for pesticide detection in food and environmental samples. The recent advancements in the synthesis and application of molecularly imprinted polymers using cyclodextrins have been critically analyzed. Furthermore, the current limitations have been meticulously examined, and potential opportunities for greenification with cyclodextrin applications in this field have been discussed. By harnessing the advantages of cyclodextrins in molecular imprinting, it is possible to develop highly selective and efficient methods for detecting pesticides in food and environmental samples while also addressing the challenges of sustainability and environmental impact.

La-doped NiWO4 coupled with reduced graphene oxide for effective electrochemical determination of diphenylamine

Diphenylamine (DPA) is a harmful pesticide widely used to control post-harvest scald of fruits. In this study, rapid and sensitive determination of DPA was realized by the development of an effective electrochemical sensor, which was fabricated by coupling La-doped NiWO4 nanoparticles (La/NiWO4) with reduced graphene oxide (rGO), and the obtained rGO/La/NiWO4 nanocomposite was modified on glassy carbon electrodes (GCEs). The morphologies, structures and compositions were well characterized, and the effects of La doping and the introduction of rGO on the crystal structure and electrochemical performance were discussed. The incorporation of both La and rGO was found to enhance the active surface area and improve conductivity, resulting in the enhanced electrocatalytic performance of rGO/La/NiWO4/GCE, including a wide linear range (0.01-500 μM), a low detection limit (0.0058 μM) and high sensitivity (1.778 μA μM-1 cm-2). The fabricated sensor was further used for DPA detection in fresh apple extract to evaluate its practicality and demonstrated excellent recoveries ranging from 99.52 to 104.70%.

One-pot synthesis of ion-imprinted three-dimensional porous material based on graphene oxide for the selective adsorption of copper(II)

Molecularly imprinted polymers (MIPs) are synthetic polymers with predetermined selectivity for a given analyte. One major problem associated with MIPs is the inaccessibility of a large fraction of the recognition sites that remain buried within the polymeric matrix. To address this problem, the high selectivity imparted by the imprinting technique and the porosity of three-dimensional (3D) graphene oxide (GO)-based porous materials were utilized in this work to prepare a 3D GO-based Cu(II)-ion-imprinted material (hereafter denoted as IIM) via one-pot reactions of GO, chitosan (CS), and glutaraldehyde in the presence of Cu(II). Results of equilibrium binding experiments show that IIM has a high template-ion binding capacity (1.75 mmol g^-1) and good imprinting factor (2.19). Further, results of selectivity tests indicate that IIM has a high Cu(II)-recognition ability. IIM also has a fast binding rate and satisfactory reusability. In addition, the Langmuir isotherm model was well fitted with the experimental data, indicating the monolayer adsorption of Cu(II) ions. The present work provided a convenient approach to prepare 3D GO-based imprinted materials that are promising for enrichment or recycling of target compounds from wastewater.

Recent Advances in Ionic Liquids and Ionic Liquid-Functionalized Graphene: Catalytic Application and Environmental Remediation

Applications of ionic liquids (ILs) for the modification physicochemical properties of porous materials have been extensively studied with respect to various applications based on the understanding and development of properties of ILs. In this review, IL–graphene composites are discussed and provided a perspective of composites of IL. IL has been used as a medium to improve the dispersibility of graphene, and the resulting composite material shows excellent performance in gas separation and catalysis during environmental treatment. The applications of ILs and IL–functionalized graphene are discussed in detail with the actual environmental issues, and the main challenges and opportunities for possible future applications are summarized.

Graphene Oxide Molecularly Imprinted Polymers as Novel Adsorbents for Solid-Phase Microextraction for Selective Determination of Norfloxacin in the Marine Environment

In this study, a novel sample pretreatment strategy of solid-phase microextraction using graphene oxide molecularly imprinted polymers as adsorbents coupled with high-performance liquid chromatography was developed to detect norfloxacin in the marine environment. As a carrier, the imprinted polymers were synthesized by precipitation polymerization with graphene oxide. Compared with graphene oxide non-imprinted polymers, the graphene oxide molecularly imprinted polymers exhibited higher adsorption capacity towards norfloxacin. The synthesized polymeric materials were packed into a molecularly imprinted solid-phase microextraction cartridge, and critical parameters affecting the extraction process were optimized. Under the optimized molecular imprinted solid-phase microextraction condition, the proposed method was applied to the analysis of norfloxacin for seawater and fish with satisfactory recovery (90.1–102.7%) and low relative standard deviation (2.06–5.29%, n = 3). The limit of detection was 0.15 μg L⁻¹ and 0.10 μg kg⁻¹ for seawater and fish, respectively. The study revealed that the proposed molecularly imprinted solid-phase microextraction represents an attractive sample pretreatment strategy for the analysis of norfloxacin in the marine environment.

Electrocatalytic detection of noxious antioxidant diphenylamine in fruit samples with support of Cu@nanoporous carbon modified sensor

Herein, the facile synthesis of copper(II) and benzene-1,3,5-tricarboxylate (Cu-BTC) and copper nanoporous carbon (Cu@NPC) for the electrochemical detection of diphenylamine (DPA) was systematically investigated. The Cu-BTC and Cu@NPC materials structural, morphological, and thermal stability were evaluated and confirmed using FE-SEM, HR-TEM, XRD, FT-IR, and TGA. The electrocatalytic behavior of sensor materials was examined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). It is presumed that the structural stability and synergic effect exhibited in Cu@NPC are favorable for enhanced sensitivity and selectivity towards the detection of DPA. The Cu@NPC exhibited a wide linear range (0.09-396.82 μM) and the lowest limit of detection (5 nM). Furthermore, the real sample analysis of the sensor for the detection of DPA in apples and pears confirms its potential capability in practical application.

Green Aspects in Molecularly Imprinted Polymers by Biomass Waste Utilization

Molecular Imprinting Polymer (MIP) technology is a technique to design artificial receptors with a predetermined selectivity and specificity for a given analyte, which can be used as ideal materials in various application fields. In the last decades, MIP technology has gained much attention from the scientific world as summarized in several reviews with this topic. Furthermore, green synthesis in chemistry is nowadays one of the essential aspects to be taken into consideration in the development of novel products. In accordance with this feature, the MIP community more recently devoted considerable research and development efforts on eco-friendly processes. Among other materials, biomass waste, which is a big environmental problem because most of it is discarded, can represent a potential sustainable alternative source in green synthesis, which can be addressed to the production of high-value carbon-based materials with different applications. This review aims to focus and explore in detail the recent progress in the use of biomass waste for imprinted polymers preparation. Specifically, different types of biomass waste in MIP preparation will be exploited: chitosan, cellulose, activated carbon, carbon dots, cyclodextrins, and waste extracts, describing the approaches used in the synthesis of MIPs combined with biomass waste derivatives.

Recent Advances of Molecularly Imprinted Polymers Based on Cyclodextrin

Molecular imprinting polymers (MIPs), generally considered as artificial mimics that are comparable to natural receptor, are polymers with tailor-made specific recognition sites complementary to the template molecules in shape and size. As a class of supramolecular compounds, cyclodextrins (CDs) are flourishing in the field of molecular imprinting with their unique structural properties. This review presents recent advances in application of MIPs based on CDs during the past five years. The discussion is grouped according to the different role of CDs in MIPs, that is, functional monomer, carrier modifier, etc. Main focus is the application of CD-based MIP on sample preparation, detection, and sensing. Additionally, drug delivery with CD-based MIP is also briefly discussed. Finally, challenges and future prospects of application of CDs in MIP are elaborated.

[Research progress in application of immobilized ionic liquid materials to separation by solid-phase extraction]

Ionic liquids are low-temperature molten salts with almost no vapor pressure, and they are composed of organic cations and inorganic anions. Ionic liquids are characterized by the properties of good chemical stability, high solubility, designable structure, high conductivity and so on. The physicochemical properties of an ionic liquid depend on the nature and size of the cation and anion, which confer unique characteristics; hence, these reagents are also termed "designed extractants." As a new class of green solvents, ionic liquids are potential replacements to traditional volatile organic solvents used for extraction; for this reason, ionic liquids have attracted the attention of scientists. Research on the methods of preparation and applications of ionic liquids is being diversified, and they are extensively used in catalytic chemistry, photoelectron chemistry, materials chemistry, analytical chemistry, etc. By functional guiding design, the structures of ionic liquids, especially the imidazole ring cations, can be easily grafted with active groups such as hydroxyl, amino, carboxyl, and cyano groups, so that interactions between the ionic liquids and target molecules can be promoted via the formation of π-π bonds, hydrogen bonds, ionic bonds, and van der Waals forces. In addition, ionic liquids can be readily immobilized on solid carriers by physical or chemical means in order to obtain a new solid material with ionic liquids embedded internally or decorated on the surface. Furthermore, ionic liquids could be converted into ionic liquid-immobilized composite materials by impregnation, grafting, etc. The resulting composites not only suffer minimal loss of ionic liquids but also retain the typical characteristics of the ionic liquids and solid materials, thus showing improved mass transfer performance and better adsorption performance. Immobilized materials are characterized by high enrichment efficiency, high adsorption capacity, good stability, and strong extraction selectivity, as well as the presence of numerous recognition sites and high utilization rate of ionic liquids. In recent years, they have been widely used as solid-phase extraction adsorption materials for the separation of small organic molecules. This review introduces common immobilization methods and the characteristics of ionic liquid-immobilized materials, as well as their application in solid-phase extraction. In this paper, methods for the immobilization of ionic liquids with solid carriers such as silica gel, molecular sieves, molecularly imprinted polymers, graphene oxide, and magnetic nanomaterials are summarized, and the application of ionic liquid-immobilized materials in solid-phase extraction is reviewed. The target substances include alkaloids, flavonoids, polyphenols, and other natural active components as well as common drug molecules, organic pesticides, and other organic small molecular compounds. The properties, applications, and separation mechanisms of ionic liquids immobilized with various carriers are systematically introduced. Literature survey shows that the distribution of the binding active sites of ionic liquid-immobilized materials to the target molecules is more uniform, which increases the adsorption capacity of the materials. The adsorption efficiency of ionic liquid-immobilized materials is related to the type of ionic liquid, amount of adsorption material, concentration of the sample solution, adsorption temperature, solution pH, flow rate of the eluent, and type and amount of the eluting solvent. The existing disadvantages of ionic liquids, such as simple structures, insufficient basic theoretical research, and unsatisfactory extraction degree in complex matrixes would also be discussed. The corresponding solutions would be presented with the aim of providing guidance for the application of ionic liquid-immobilized materials in the separation and analysis of targets in complex matrices, thus paving the way for a new direction in the field of extraction and separation.

Chemical binding of horseradish peroxidase enzyme with poly beta-cyclodextrin and its application as molecularly imprinted polymer for the monitoring of H2 O2 in human plasma samples

In this study, a selective and sensitive molecular imprinting-based electrochemical sensors, for horseradish peroxidase (HRP) entrapment was fabricated using electro polymerization of ß-Cyclodextrin (ß-CD) on the surface of glassy carbon electrode. Poly beta-cyclodextrin P(ß-CD) provide efficient surface area for self-immobilization of HRP as well as improve imprinting efficiency. The proposed imprinted biosensor successfully utilized for detection of HRP with excellent analytical results which linear range is 0.1 mg/mL to 10 ng/mL with LOD of 2.23 ng/mL. Furthermore, electrocatalytical activity of the prepared biosensor toward the reduction of hydrogen peroxide was investigated in the ranges of 1 to 15 μM with a detection limit of 0.4 μM by using chronoamperometry technique. The developed biosensor was used for the detection of hydrogen peroxide in unprocessed human plasma sample.

Selective extraction and detection of norfloxacin from marine sediment and seawater samples using molecularly imprinted silica sorbents coupled with HPLC

A simple, sensitive and effective method was developed and validated for selective adsorption and quantitation of norfloxacin (NFX) from marine sediments and seawater samples using the novel molecularly imprinted silica polymers as sorbents followed by high-performance liquid chromatographic analysis with diode array detection (HPLC-DAD). The imprinted particles were characterized by different techniques and the molecular recognition for NFX was also investigated. Several parameters affecting the extraction efficiency of molecularly imprinted solid-phase extraction (MISPE) process were optimized. Three sediment and seawater samples from Weihai bay in China were analyzed and the results show that satisfactory recoveries (77.2-98.7%) were achieved in seawater samples with low relative standard deviation (RSD) values less than 6.89% (n = 3), and the recoveries in sediments were in the range of 75.5-91.7%. The limits of detection are respectivley 2 μg L^-1 in seawater samples and 5 μg kg^-1 in sediments.

Modeling rapid and selective capture of nNOS–PSD-95 uncouplers from Sanhuang Xiexin decoction by novel molecularly imprinted polymers based on metal–organic frameworks

Novel and highly selective molecularly imprinted polymers based on the surface of metal–organic frameworks, NH₂-MIL-101(Cr) (MIL@MIP_S), were successfully fabricated to capture neuronal nitric oxide synthase–postsynaptic density protein-95 (nNOS–PSD-95) uncouplers from Sanhuang Xiexin Decoction (SXD) for stroke treatment. The resultant polymers were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and X-ray diffraction. The performance tests revealed that MIL@MIPs had a large binding capacity, fast kinetics, and excellent selectivity. Then the obtained polymers were satisfactorily applied to solid-phase extraction coupled with high-performance liquid chromatography to selectively capture nNOS–PSD-95 uncouplers from SXD. Furthermore, the biological activities of components obtained from SXD were evaluated in vivo and in vitro. As a consequence, the components showed a potent neuroprotective effect from the MTS assay and uncoupling activity from the co-immunoprecipitation experiment. In addition, the anti-ischemic stroke assay in vivo was further investigated to determine the effect of reducing infarct size and ameliorating neurological deficit by the active components. Therefore, this present study contributes a valuable new method and new tendency to selectively capture active components for stroke treatment from SXD and other natural medicines.

Novel MIL@MIPs were prepared to rapidly capture nNOS–PSD-95 uncouplers from Sanhuang Xiexin decoction, coupled with SPE and HPLC.

Simple sonochemical synthesis of lanthanum tungstate (La2(WO4)3) nanoparticles as an enhanced electrocatalyst for the selective electrochemical determination of anti-scald-inhibitor diphenylamine

In this work, lanthanum tungstate (La₂(WO₄)₃) nanoparticles (NPs) were synthesized by facile sonochemical method (elmasonic P, under-sonication 37/100 kHz, ~60 W energy) and utilized as an electrode material for the selective and sensitive electrochemical determination of anti-scald inhibitor diphenylamine (DPA). The synthesized La₂(WO₄)₃ NPs were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDAX), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) analyses. The results revealed that the sonochemically synthesized La₂(WO₄)₃ nanoparticles were with high crystallinity and uniformly distributed nanoparticles like structure. The as-prepared lanthanum tungstate NPs exhibited an excellent electrocatalytic behavior for DPA determination with the lowest detection limit of 0.0024 µM, wide linear range response of 0.01-58.06 µM and a remarkable sensitivity of 1.021 µA µM^-1 cm^-2. Furthermore, La₂(WO₄)₃ NPs showed a good recovery to DPA in apple juice sample. Besides, the electrochemical mechanism of the DPA oxidation reaction was provided in detail.

Highly selective separation and detection of cyromazine from seawater using graphene oxide based molecularly imprinted solid-phase extraction

A novel molecularly imprinted polymer based on graphene oxide was prepared as a solid-phase extraction adsorbent for the selective adsorption and extraction of cyromazine from seawater samples. The obtained graphene oxide molecularly imprinted polymer and non-imprinted polymer were nanoparticles and characterized by scanning electron microscopy. The imprinted polymer showed higher adsorption capacity and better selectivity than non-imprinted polymer, and the maximum adsorption capacity was 14.5 mg/g. The optimal washing and elution solvents for molecularly imprinted solid phase extraction procedure were 2 mL of acetonitrile/water (80:20, v/v) and methanol/acetic acid (70:30, v/v), respectively. The recoveries of cyromazine in the spiked seawater samples were in the range of 90.3-104.1%, and the relative standard deviation was <5% (n = 3) under the optimal procedure and detection conditions. The limit of detection of the proposed method was 0.7 μg/L, and the limit of quantitation was 2.3 μg/L. Moreover, the imprinted polymer could keep high adsorption capacity for cyromazine after being reused six times at least. Finally, the synthesized graphene oxide molecularly imprinted polymer was successfully used as a satisfied sorbent for high selectivity separation and detection of cyromazine from seawater coupled with high-performance liquid chromatography.

Comments on "Novel molecularly imprinted polymer based on β-cyclodextrin@graphene oxide: Synthesis and application for selective diphenylamine determination"

This comment mainly deals with a mistake of applying pseudo-first-order kinetic model for testing the kinetic behaviors of adsorption.

Electrochemical sensing of free radical antioxidant diphenylamine cations (DPAH˙+) with carbon interlaced nanoflake-assembled MgxNi9−xS8 microspheres

The detection and control of free radical antioxidant diphenylamine cations (DPAH˙⁺), a typical organic industrial waste water byproduct, is important for environmental safety and protection.

Ultrasound-assisted synthesis of two-dimensional layered ytterbium substituted molybdenum diselenide nanosheets with excellent electrocatalytic activity for the electrochemical detection of diphenylamine anti-scald agent in fruit extract

Metal chalcogenides with large active sites have been received great attention as an excellent catalyst due to their hierarchical structural properties. Here, we have demonstrated the synthesis of ytterbium-doped molybdenum selenide (YbMoSe₂) in the form of two-dimensional nanosheets by using a simple ultrasonic method. The formation of the crystal phase of prepared YbMoSe₂ nanosheets was studied by using the selective characterization techniques. The reported HRTEM confirmed that the introduction of heterogeneous spin of Yb with MoSe₂ creates the lattice distortion. Thus, the active sites can be increased by creating the lattice distortion on the basal plane of the metal chalcogenides nanosheets. The band gap study was carried out by using UV-visible spectrometer and demonstrated the decreasing band gap of MoSe₂ from 1.30 eV to 1.15 eV due to the Yb substitution/doping. The increasing active sites with decreasing band gap facilitate an excellent electronic conductivity and electrochemical activity. Furthermore, the electrocatalytic activity of YbMoSe₂ modified glassy carbon electrode (YbMoSe₂/GCE) toward the sensing of diphenylamine (DPA) anti-scald agent. As expected, YbMoSe₂/GCE showed a high level of electrochemical activity with a low limit of detection (0.004 µM) and excellent sensitivity (11.4 µA µM^-1 cm^-2) towards the detection of DPA. In addition, the superior selectivity, stability, and reproducibility of YbMoSe₂/GCE also were recorded. The beneficial electrochemical activity of YbMoSe₂/GCE offered the more advantages to detection of DPA in the food sample also.

An ionic liquid functionalized graphene adsorbent with multiple adsorption mechanisms for pipette-tip solid-phase extraction of auxins in soybean sprouts

A new ionic liquid functionalized graphene-pipette-tip solid-phase extraction method coupled with high-performance liquid chromatography was established for the simultaneous extraction and determination of three auxins in soybean sprouts. The graphene adsorbent, with multiple adsorption mechanisms, was first synthesized by functional modification of pentafluorobenzyl imidazolium bromide ionic liquid through thiol-ene click chemistry. The ionic liquid was applied to prevent the aggregation of graphene; it also imbued graphene with the ability for π-π interactions, ionic exchange, electrostatic interactions, as well as hydrogen bonding (which is stronger than the interaction between water and analytes), by augmenting the adsorption mechanisms between the adsorbent and analytes. Under optimized conditions, linearity was achieved in the ranges 0.03-5.00 µg/g for indole-3-acetic acid and 1-naphthaleneacetic acid and 0.09-5.00 µg/g for 2,4-dichlorophenoxyacetic acid, with a detection limit of 0.004-0.026 µg/g; this adsorbent has been successfully applied for the determination of auxins in soybean sprouts.

Chemiluminescence determination of furazolidone in poultry tissues and water samples after selective solid phase microextraction using magnetic molecularly imprinted polymers

For the first time, a selective extraction method combined with chemiluminescence was developed for the determination of FZD in various samples.