Rutile TiO2 nanocrystals with exposed {3 3 1} facets for enhanced photocatalytic CO2 reduction activity

Enhancing photocatalytic CO2 reduction with TiO2-based materials: Strategies, mechanisms, challenges, and perspectives

The concentration of atmospheric CO2 has exceeded 400 ppm, surpassing its natural variability and raising concerns about uncontrollable shifts in the carbon cycle, leading to significant climate and environmental impacts. A promising method to balance carbon levels and mitigate atmospheric CO2 rise is through photocatalytic CO2 reduction. Titanium dioxide (TiO2), renowned for its affordability, stability, availability, and eco-friendliness, stands out as an exemplary catalyst in photocatalytic CO2 reduction. Various strategies have been proposed to modify TiO2 for photocatalytic CO2 reduction and improve catalytic activity and product selectivity. However, few studies have systematically summarized these strategies and analyzed their advantages, disadvantages, and current progress. Here, we comprehensively review recent advancements in TiO2 engineering, focusing on crystal engineering, interface design, and reactive site construction to enhance photocatalytic efficiency and product selectivity. We discuss how modifications in TiO2's optical characteristics, carrier migration, and active site design have led to varied and selective CO2 reduction products. These enhancements are thoroughly analyzed through experimental data and theoretical calculations. Additionally, we identify current challenges and suggest future research directions, emphasizing the role of TiO2-based materials in understanding photocatalytic CO2 reduction mechanisms and in designing effective catalysts. This review is expected to contribute to the global pursuit of carbon neutrality by providing foundational insights into the mechanisms of photocatalytic CO2 reduction with TiO2-based materials and guiding the development of efficient photocatalysts.

Toward a Comprehensive Understanding of Amorphous Photocatalysts: Fundamental Hypotheses and Applications in CO2 Photoreduction

In principle, photocatalytic activity can be precisely controlled with crystalline catalysts. However, an amorphous photocatalyst could be a viable candidate for CO₂ photoreduction to form value-added products. The amorphous phase is currently part of the crystalline material in several ongoing CO₂ photoreduction studies. Additionally, no study indicates the amorphous material required for overall CO₂ photoreduction. This perspective review article highlights fundamental assumptions that are necessary to gain insights and understand the effectiveness of amorphous photocatalysts for CO₂ photoreduction. We start with basic ideas and theories about these materials, including light harvesting, variable coordination number, and the interaction of CO₂ molecules with the amorphous catalytic surface. To understand the prospects of the amorphous photocatalyst, we explore machine learning with EXAFS. Furthermore, we discuss product selectivity and regeneration of photocatalysts in detail. Finally, we briefly review the work in progress on amorphous materials and compare it to that on crystalline ones.

Semiconductor facet junctions for photocatalytic CO2 reduction

Photocatalytic carbon dioxide (CO2) conversion has been recognized as one of the promising strategies for unraveling current environmental and energy problems attributed to the growing fossil fuel consumption of the human society because it can directly harness incident sunlight energy for converting waste CO2 into valuable compounds. Increasing attention has been provoked to the semiconductor facet junction photocatalysts due to their unique feature in enhancing the photogenerated electron–hole pair utilization toward improving the photocatalytic CO2 conversion performance. In the past decade, significant breakthroughs in the semiconductor facet junction photocatalysts for photocatalytic CO2 conversion. In this review, we give a brief introduction on the development and the idea of the semiconductor facet junction photocatalysts. Then, the unique advantages of the semiconductor facet junction photocatalysts for photocatalytic CO2 conversion are summarized. Subsequently, the recent development of semiconductor facet junction photocatalysts in photocatalytic CO2 conversion is overviewed. We end this review by presenting the perspectives and challenges in this field for its future advancement toward practical applications. This review is expected to push forward the development of not only photocatalytic CO2 conversion but also other energy and environmental photocatalytic applications.

Contribution of photocatalytic and Fenton-based processes in nanotwin structured anodic TiO2 nanotube layers modified by Ce and V

In the present work, nanotwin structured TiO₂ nanotube (TNT) layers are prepared by the electrochemical anodization technique to form the anatase phase and by surface modification via spin-coating of Ce and V precursors to form Ce-TNT and V-TNT, respectively. The surface and cross-sectional images by SEM revealed that the nanotubes have an average diameter of ∼130 nm and a length of ∼14 μm. In addition, the TEM images revealed the nanotwin structures of the nanotubes, especially the anatase (001) and (112) twin surfaces, that increase the transport of photogenerated charges. The photoinduced degradation of caffeine (CAF) by TNT, Ce-TNT, and V-TNT led to a degradation extent of 16%, 26% and 33%, respectively, whereas it increased to 26%, 38%, and 46% in the presence of H₂O₂, owing to the involvement of Fenton-based processes (in addition to photocatalysis). The effect of the Fenton-based processes accounts for about 10% of the total degradation extent of CAF. Finally, the mechanism of the photoinduced degradation of CAF was investigated. The main oxidative species were the hydroxyl radicals, and the better efficiency of V-TNT over Ce-TNT and TNT was ascribed to its negative surface, thus improving the interactions with CAF.

The application and improvement of TiO2 (titanate) based nanomaterials for the photoelectrochemical conversion of CO2 and N2 into useful products

In this review, we describe the photoelectrochemical (PEC) transformation of atmospheric species such as carbon dioxide (CO₂) and nitrogen (N₂) into useful industrial products on TiO₂ and TiO₂ composite photoelectrodes.

Green synthesis of boron and nitrogen co-doped TiO2 with rich B-N motifs as Lewis acid-base couples for the effective artificial CO2 photoreduction under simulated sunlight

Boron and nitrogen co-doped Titanium dioxide (TiO₂) nanosheets (BNT) with high surface area of 136.5 m² g^-1 were synthesized using ammonia borane as the green and triple-functional regent, which avoids the harmful and explosive reducing regents commonly used to create surface defects on TiO₂. The decomposition of ammonia borane could incorporate reactive Lewis acid-base (B, N) pairs, together with the as-generated H₂ to create mesoporous structure and rich oxygen vacancies in pristine TiO₂. The BNTs prepared from various ammonia borane loading are evaluated in photoreduction of carbon dioxide (CO₂) with steam under simulated sunlight, achieving about 3.5 times higher carbon monoxide (CO) production than pristine TiO₂ under the same conditions. Steady state and transient optical measurements indicated BNT with reduced band gap, rich defect states and elevated conduction band position could enhance the light harvesting efficiency and promote the charge transfer at the catalyst/CO₂ interface. Density functional theory simulation and in situ FTIR suggest that the Lewis acid-base (B, N) pairs on BNT may very substantially increase the activation of inert CO₂ which facilitates their photoreduction with the hydrogen from the water splitting at the surface defects on TiO₂. Finally, a reaction mechanism of Lewis acid-base assisted CO₂ photoreduction leading to substantially improved performance is proposed.

An In situ Raman study of intermediate adsorption engineering by high-index facet control during the hydrogen evolution reaction

An in situ Raman study of the mechanism of HER catalytic performance enhanced by high-index facets on Ti@TiO₂ nanosheets.

Engineering the Surface/Interface Structures of Titanium Dioxide Micro and Nano Architectures towards Environmental and Electrochemical Applications

Titanium dioxide (TiO₂) materials have been intensively studied in the past years because of many varied applications. This mini review article focuses on TiO₂ micro and nano architectures with the prevalent crystal structures (anatase, rutile, brookite, and TiO₂(B)), and summarizes the major advances in the surface and interface engineering and applications in environmental and electrochemical applications. We analyze the advantages of surface/interface engineered TiO₂ micro and nano structures, and present the principles and growth mechanisms of TiO₂ nanostructures via different strategies, with an emphasis on rational control of the surface and interface structures. We further discuss the applications of TiO₂ micro and nano architectures in photocatalysis, lithium/sodium ion batteries, and Li-S batteries. Throughout the discussion, the relationship between the device performance and the surface/interface structures of TiO₂ micro and nano structures will be highlighted. Then, we discuss the phase transitions of TiO₂ nanostructures and possible strategies of improving the phase stability. The review concludes with a perspective on the current challenges and future research directions.

Amino acid-assisted controlling the shapes of rutile, brookite for enhanced photocatalytic CO2 reduction

Rutile and brookite titania with tunable shape have been synthesized. The investigation results show that the photcatalytic CO₂ reduction activity of rutile increases with increasing percentage of {111} surface and brookite with exposed {210} facets exhibit a notable photocatalytic reduction of CO₂ to methanol.