Well encapsulated Mn3O4 octahedra in graphene nanosheets with much enhanced Li-storage performances

The effects of calcination on the electrochemical properties of manganese oxides

Three different crystalline forms of Mn3O4 were successfully prepared by a liquid phase method with different additives. Using XRD, SEM, EDS, BET, compacted density and electrochemical analysis, the effects of different additives on the morphology, phase composition, surface characteristics, specific surface area, electrochemical and other physical and chemical properties of manganese oxides were investigated. The results showed that the rod type Mn3O4 was prepared by mixing ammonia water and anhydrous ethanol in a 1 : 1 ratio and an appropriate amount of cetylmethyl ammonium bromide as the additive. The rod-type Mn3O4 showed a maximum specific surface area of 63.87 m2 g-1 and has the advantages of low compaction density, no introduction of other impurities, and high adsorption potential. It also has excellent electrochemical performance and an impedance of 240 Ω. The specific capacity was as high as 666.5 mA h g-1 at 1C current density and 382.2 mA h g-1 after 200 cycles. The results also showed that the electrochemical performance of Mn2O3 prepared at 700 °C from the rod-type Mn3O4 was the best. When it was used as the anode material of a lithium-ion battery, it showed a high specific capacity of 712.1 mA h g-1 after 200 cycles. Therefore, the rod-type Mn2O3 material has the characteristics of high capacity, low cost and environmental friendliness and is a promising candidate anode material for lithium-ion batteries.

Coupling of Mn2O3 with Heteroatom-Doped Reduced Graphene Oxide Aerogels with Improved Electrochemical Performances for Sodium-Ion Batteries

Currently, efforts to address the energy needs of large-scale power applications have expedited the development of sodium-ion (Na-ion) batteries. Transition-metal oxides, including Mn₂O₃, are promising for low-cost, eco-friendly energy storage/conversion. Due to its high theoretical capacity, Mn₂O₃ is worth exploring as an anode material for Na-ion batteries; however, its actual application is constrained by low electrical conductivity and capacity fading. Herein, we attempt to overcome the problems related to Mn₂O₃ with heteroatom-doped reduced graphene oxide (rGO) aerogels synthesised via the hydrothermal method with a subsequent freeze-drying process. The cubic Mn₂O₃ particles with an average size of 0.5-1.5 µm are distributed to both sides of heteroatom-doped rGO aerogels layers. Results indicate that heteroatom-doped rGO aerogels may serve as an efficient ion transport channel for electrolyte ion transport in Mn₂O₃. After 100 cycles, the electrodes retained their capacities of 242, 325, and 277 mAh g^-1, for Mn₂O₃/rGO, Mn₂O₃/nitrogen-rGO, and Mn₂O₃/nitrogen, sulphur-rGO aerogels, respectively. Doping Mn₂O₃ with heteroatom-doped rGO aerogels increased its electrical conductivity and buffered volume change during charge/discharge, resulting in high capacity and stable cycling performance. The synergistic effects of heteroatom doping and the three-dimensional porous structure network of rGO aerogels are responsible for their excellent electrochemical performances.

Enhanced Electrochemical Performances of Mn3O4/Heteroatom-Doped Reduced Graphene Oxide Aerogels as an Anode for Sodium-Ion Batteries

Owing to their high theoretical capacity, transition-metal oxides have received a considerable amount of attention as potential anode materials in sodium-ion (Na-ion) batteries. Among them, Mn₃O₄ has gained interest due to the low cost of raw materials and the environmental compatibility. However, during the insertion/de-insertion process, Mn₃O₄ suffers from particle aggregation, poor conductivity, and low-rate capability, which, in turn, limits its practical application. To overcome these obstacles, we have successfully prepared Mn₃O₄ nanoparticles distributed on the nitrogen (N)-doped and nitrogen, sulphur (N,S)-doped reduced graphene oxide (rGO) aerogels, respectively. The highly crystalline Mn₃O₄ nanoparticles, with an average size of 15-20 nm, are homogeneously dispersed on both sides of the N-rGO and N,S-rGO aerogels. The results indicate that the N-rGO and N,S-rGO aerogels could provide an efficient ion transport channel for electrolyte ion stability in the Mn₃O₄ electrode. The Mn₃O₄/N- and Mn₃O₄/N,S-doped rGO aerogels exhibit outstanding electrochemical performances, with a reversible specific capacity of 374 and 281 mAh g^-1, respectively, after 100 cycles, with Coulombic efficiency of almost 99%. The interconnected structure of heteroatom-doped rGO with Mn₃O₄ nanoparticles is believed to facilitate fast ion diffusion and electron transfer by lowering the energy barrier, which favours the complete utilisation of the active material and improvement of the structure's stability.

A metal-organic-framework approach to engineer hollow bimetal oxide microspheres towards enhanced electrochemical performances of lithium storage

Nanosized electrode materials with a hollow structure, larger specific surface area, and lower energy density as well as more void space are widely adopted for high-performance lithium-ion batteries. In this work, we obtained bimetal-organic frameworks of Fe/Mn-MOF-74 with a hollow microsphere morphology via a facile one-step microwave method and further used it to fabricate hollow Fe-Mn-O/C microspheres. Endowed with the metal-organic-framework-derived carbon-coated nanoparticle-assembled hollow structure with hierarchical porous characteristics and synergistic effects between two different metal species, the Fe-Mn-O/C electrode exhibits outstanding electrochemical performances as the anode of lithium-ion batteries. It achieves improved cycling performance (1294 mA h g-1 after 200 cycles at 0.1 A g-1) and good rate capability (722, 604, and 521 mA h g-1 at 0.2, 0.5 and 1 A g-1). The smart design of a hollow morphology with uniform two metal species can promote the synthesis of multimetal oxides and their carbon composites, as well as their further potential application for energy-storage.

In Situ Synthesis of Mn3 O4 Nanoparticles on Hollow Carbon Nanofiber as High-Performance Lithium-Ion Battery Anode

The practical applications of Mn₃ O₄ in lithium-ion batteries are greatly hindered by fast capacity decay and poor rate performance as a result of significant volume changes and low electrical conductivity. It is believed that the synthesis of nanoscale Mn₃ O₄ combined with carbonaceous matrix will lead to a better electrochemical performance. Herein, a convenient route for the synthesis of Mn₃ O₄ nanoparticles grown in situ on hollow carbon nanofiber (denoted as HCF/Mn₃ O₄ ) is reported. The small size of Mn₃ O₄ particles combined with HCF can significantly alleviate volume changes and electrical conductivity; the strong chemical interactions between HCF and Mn₃ O₄ would improve the reversibility of the conversion reaction for MnO into Mn₃ O₄ and accelerate charge transfer. These features endow the HCF/Mn₃ O₄ composite with superior cycling stability and rate performance if used as the anode for lithium-ion batteries. The composite delivers a high discharge capacity of 835 mA h g^-1 after 100 cycles at 200 mA g^-1 , and 652 mA h g^-1 after 240 cycles at 1000 mA g^-1 . Even at 2000 mA g^-1 , it still shows a high capacity of 528 mA h g^-1 . The facile synthetic method and outstanding electrochemical performance of the as-prepared HCF/Mn₃ O₄ composite make it a promising candidate for a potential anode material for lithium-ion batteries.