Synthesis of a hierarchical SnS2 nanostructure for efficient adsorption of Rhodamine B dye

SnO2/Sn with core-shell structure Schottky heterojunctions loaded in graphene to promote electrochemical reaction kinetics and enable efficient lithium-ion storage

The stannic oxide (SnO2) anode expands in volume during cycling causing a decrease in reversible capacity. In this work, we generated a spherical SnO2/Sn heterojunction with core-shell structure composites encapsulated by graphene (SnO2/Sn/G) in situ using a simple one-step hydrothermal and subsequent annealing process. SnO2/Sn heterojunction nanospheres dispersed in a porous graphene framework accelerate the diffusion kinetics of electrons and ions. In addition, the structure plays a key role in mitigating large volume changes and nanostructure agglomeration. As a result, SnO2/Sn/G exhibits excellent performance as an anode material for lithium-ion batteries (LIBs), maintaining a reversible specific capacity of 720.6 mA h g-1 even after 600 cycles at a current density of 0.5 A g-1.

Snowflake-like Metastable Wurtzite CuGaS2/MoS2 Composite with Superior Electrochemical HER Activity

In the present work, we report the synthesis of wurtzite CuGaS₂ and its composite with MoS₂ and explored their efficacy toward two important applications, viz. electrocatalytic hydrogen evolution reaction (HER) and adsorption of Rhodamine B dye. The CuGaS₂ was synthesized via a low-temperature ethylenediamine-mediated solvothermal method. The obtained products were characterized by various techniques such as X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy to ascertain the phase formation, surface morphology, and elemental oxidation states. The electrocatalytic activity of the wurtzite CuGaS₂ and CuGaS₂/MoS₂ composites toward HER was investigated, wherein the CuGaS₂/MoS₂ composite exhibited superior activity when compared to the pristine sample with a small Tafel slope of 56.2 mV dec^-1 and an overpotential value of -464 mV at the current density of 10 mA cm^-2. On the other hand, the synthesized CuGaS₂ also showed an impressive adsorption behavior toward Rhodamine B dye with 99% adsorption in 60 min, which is relatively better than that observed with the composite material.

Equilibrium, Kinetic, and Thermodynamic Studies on Adsorption of Rhodamine B from Aqueous Solutions Using Oxidized Mesoporous Carbons

Oxidized mesoporous carbon C_SBA-15, obtained by the hard method, was applied to remove rhodamine B from the aqueous system. The process of carbon oxidation was performed using 0.5 and 5 M of nitric (V) acid solution at 70 and 100 °C. Functionalization of mesoporous carbon with HNO₃ solutions led to reduction in the surface area, pore volume, and micropore area, however, it also led to an increased number of oxygen functional groups of acidic character. The functional groups probably are located at the entrance of micropores, in this way, reducing the values of textural parameters. Isotherms of rhodamine B adsorption indicate that the oxidation of mesoporous carbons resulted in an increase in the effectiveness of the removal of this dye from aqueous solutions. The influence of temperature, pH, and contact time of mesoporous material/rhodamine B on the effectiveness of dye removal was tested. The process of dye adsorption on the surfaces of the materials studied was established to be most effective at pH 12 and at 60 °C. Kinetic studies of the process of adsorption proved that the equilibrium state between the dye molecules and mesoporous carbon materials is reached after about 1 h. The adsorption kinetics were well fitted using a pseudo-second-order model. The most effective in rhodamine B removal was the sample C_SBA-15-5-100, containing the greatest number of oxygen functional groups of acidic character. The Langmuir model best represented equilibrium data.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

SnS2 Nanoparticles and Thin Film for Application as an Adsorbent and Photovoltaic Buffer

Energy consumption and environmental pollution are major issues faced by the world. The present study introduces a single solution using SnS₂ for these two major global problems. SnS₂ nanoparticles and thin films were explored as an adsorbent to remove organic toxic materials (Rhodamine B (RhB)) from water and an alternative to the toxic cadmium sulfide (CdS) buffer for thin-film solar cells, respectively. Primary characterization tools such as X-ray photoelectron spectroscopy (XPS), Raman, X-ray diffraction (XRD), and UV-Vis-NIR spectroscopy were used to analyze the SnS₂ nanoparticles and thin films. At a reaction time of 180 min, 0.4 g/L of SnS₂ nanoparticles showed the highest adsorption capacity of 85% for RhB (10 ppm), indicating that SnS₂ is an appropriate adsorbent. The fabricated Cu(In,Ga)Se₂ (CIGS) device with SnS₂ as a buffer showed a conversion efficiency (~5.1%) close to that (~7.5%) of a device fabricated with the conventional CdS buffer, suggesting that SnS₂ has potential as an alternative buffer.

Hydrothermally synthesized nanocrystalline photoactive SnS2 thin films: effect of surface directing agents

In the present work, we have synthesized tin disulphide (SnS2) thin films via a facile, low cost, single-step hydrothermal route using various surface directing agents.

Defect-rich, negatively-charged SnS2 nanosheets for efficient photocatalytic Cr(VI) reduction and organic dye adsorption in water

Nanostructures of layered materials have gained increasing attention in photocatalytic and water-treatment processes. Herein, we report on sub-30 nm SnS₂ nanosheets (NSs) which can perform photocatalytic reduction of Cr(VI) to Cr(III) quite efficiently on one hand, while removes large quantities of toxic organic dye molecules by choosing an adsorption mode of operation over photo-degradation on the other hand, unlike most other SnS₂ nanostructures. The NSs have a highly extended crystallinity growing perpendicular to the (001) lattice direction but exhibit poor X-ray diffraction for the 10 l (1 = 1,2,3…) lattice planes. With such defects, the NSs have a narrow bandgap of 2.21 eV and exhibit a significant photocurrent density at near band-edge illumination. Cr(VI) photo-reduction using the SnS₂ NSs follows a first-order reaction kinetics (rate constant of 0.10 min-1), five-fold higher than commercial TiO₂ (P-25). Furthermore, the NSs adsorb Rhodamine B dye molecules from an aqueous solution by forming a monolayer of dye molecules following a pseudo-second-order kinetic model and exhibit an adsorption capacity of ∼ 53.28 mg/g. We show that the NSs have a Zeta potential of ∼ -22 eV and preferably adsorb cationic dyes only. Thus the SnS₂ NSs can be effective for Cr(VI) contaminated waste-water treatment in a photocatalytic manner and can also act as a potential adsorbent for polluting dye molecules either in the presence or absence of sunlight. While both these activities are known for SnS₂ as well as other materials, the competitive nature of the two mechanisms while each of them is a possibility has never been investigated. Therefore, besides the high activities, the study highlights the presence of different active sites on the material surface that can respond preferentially to either inorganic or organic impurities.

Facile synthesis of the crescent-like SnS nanocrystals capped by polyvinyl pyrrolidone and its performance of adsorbing dyes

With using Sn²⁺ as tin source, l-cysteine as sulphur source and polyvinyl pyrrolidone (PVP, M_w = 1300000) as surfactant, a novel three-dimensional and crescent-like SnS nanocrystal (NCs) was successfully synthesized in a one-pot hydrothermal method. The as-prepared SnS NCs displayed uniform crescent-like morphological structure, and demonstrated excellent efficiency for the adsorption of cationic dyes such as rhodamine B (RhB) and methylene blue (MB). Kinetic analysis indicated that the adsorption process followed the pseudo second-order model, and the maximum capacity of the SnS NCs to adsorb MB was determined by Langmuir equation to be 252 mg⋅g^-1 at 298 K. The pH dependence of SnS NCs on the adsorption of cationic dyes and the characterization of zeta potential jointly suggested the existence of electrostatic attraction in the process. Overall, this study showed that electrostatic field of functional groups and the capping of PVP could significantly enhance the adsorption performance of the SnS NCs, and also provides a novel insight into the development of highly efficient inorganic adsorbents for cationic dyes.

Direct synthesis of nitrogen-doped mesoporous carbons from triazine-functionalized resol for CO2 uptake and highly efficient removal of dyes

In this study we synthesized a triazine-formaldehyde phenolic resin as a nitrogen-containing resol (N-resol) through the condensation of 2,4,6-tris(4-hydroxyphenyl)triazine and formaldehyde. We then used this N-resol as a carbon and nitrogen atom source, mixing it with a diblock copolymer of PEO-b-PCL as the soft template, for the direct synthesis of N-doped mesoporous carbons. Interestingly, the self-assembled N-resol/PEO-b-PCL blends underwent a mesophase transition from cylinder to gyroid and back again to cylinder structures upon increasing the N-resol concentration (i.e., cylinder at 50/50; gyroid at 60/40; cylinder at 70/30). After removing the soft template at 700 °C, the resultant N-doped mesoporous carbons possessed high N atom contents (up to 13 wt%) and displayed gyroid and cylinder nanostructures. The synthesized N-doped mesoporous carbons exhibited excellent CO₂ uptake capacities (up to 72 and 150 mg g^-1 at 298 and 273 K, respectively). Furthermore, the N-doped mesoporous gyroid carbon structure displayed high adsorption capacities toward organic dyes in water. The maximum adsorption capacities of rhodamine B and methylene blue in water reached as high as 204.08 and 308.64 mg g^-1, respectively; furthermore, these N-doped mesoporous carbons also maintained up to 98 % of their maximum adsorption capacities within 45 min.

Rational Design of Layered SnS2 on Ultralight Graphene Fiber Fabrics as Binder-Free Anodes for Enhanced Practical Capacity of Sodium-Ion Batteries

Generally, the practical capacity of an electrode should include the weight of non-active components such as current collector, polymer binder, and conductive additives, which were as high as 70 wt% in current reported works, seriously limiting the practical capacity. This work pioneered the usage of ultralight reduced graphene fiber (rGF) fabrics as conductive scaffolds, aiming to reduce the weight of non-active components and enhance the practical capacity. Ultrathin SnS2 nanosheets/rGF hybrids were prepared and used as binder-free electrodes of sodium-ion batteries (SIBs). The interfused graphene fibers endow the electrode a porous, continuous, and conductive network. The in situ phase transformation from SnO2 to SnS2 could preserve the strong interfacial interactions between SnS2 and graphene. Benefitting from these, the designed binder-free electrode delivers a high specific capacity of 500 mAh g-1 after 500 cycles at a current rate of 0.5 A g-1 with almost 100% Coulombic efficiency. Furthermore, the weight percentage of SnS2 in the whole electrode could reach up to 67.2 wt%, much higher than that of common electrode configurations using Cu foil, Al foil, or carbon cloth, significantly highlighting the ultralight characters and advantages of the rGF fabrics for using as binder-free electrodes of SIBs.

N-Doped Carbon Aerogels Obtained from APMP Fiber Aerogels Saturated with Rhodamine Dye and Their Application as Supercapacitor Electrodes

We developed an efficient and environmentally friendly strategy for synthesizing an N-doped carbon aerogel by the carbonization of an alkaline peroxide mechanical pulp (APMP) fiber aerogel saturated with rhodamine B (RB) dyes. The APMP aerogel was prepared via cellulose extraction, sol-gel, and freeze drying. The resulting aerogel had a high adsorption capacity (250 mg g−1) and a fast adsorption rate (within 30 s) towards RB dyes. The saturated aerogel was used as a starting material for further carbonization to prepare N-doped carbon aerogels. SEM studies showed that the 3D network structure of the APMP aerogels was well preserved after RB adsorption and carbonization. The prepared carbon aerogel exhibited a graphitized structure, and N (2.15%) was doped at pyridinic N and pyrrolic N sites in the 3D carbon network. The specific capacitance of the N-doped carbon aerogel reached 185 F g−1 at a current density of 1 A g−1, which is higher than carbon aerogels (155 F g−1).

A comprehensive review of applications of magnetic graphene oxide based nanocomposites for sustainable water purification

With the rapid growth of industrialization, water bodies are polluted with heavy metals and toxic pollutants. In pursuit of removal of toxic pollutants from the aqueous environment, researchers have been developed many techniques. Among these techniques, magnetic separation has caught research attention, as this approach has shown excellent performance in the removal of toxic pollutants from aqueous solutions. However, magnetic graphene oxide based nanocomposites (MGO) possess unique physicochemical properties including excellent magnetic characteristics, high specific surface area, surface active sites, high chemical stability, tunable shape and size, and the ease with which they can be modified or functionalized. As results of their multi-functional properties, affordability, and magnetic separation capability, MGO's have been widely used in the removal of heavy metals, radionuclides and organic dyes from the aqueous environment, and are currently attracting much attention. This paper provides insights into preparation strategies and approaches of MGO's utilization for the removal of pollutants for sustainable water purification. It also reviews the preparation of magnetic graphene oxide nanocomposites and primary characterization instruments required for the evaluation of structural, chemical and physical functionalities of synthesized magnetic graphene oxide nanocomposites. Finally, we summarized some research challenges to accelerate the synthesized MGO's as adsorbents for the treatment of water pollutants such as toxic and radioactive metal ions and organic and agricultural pollutants.

Design of GO–Ag-functionalized Fe3O4@CS composite for magnetic adsorption of rhodamine B

In this study, a novel magnetic composite (Fe₃O₄@CS/GO/Ag) modified with chitosan (CS), graphene oxide (GO) and Ag nanoparticles (Ag NPs) was successfully prepared as an efficient adsorbent for detection of rhodamine B (RB) combined with a fluorescence technique. The properties of the magnetic composite were confirmed by field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and vibrating sample magnetometry. The components of Fe₃O₄@CS/GO/Ag endowed it with excellent extraction performance and convenient operation. The main parameters affecting extraction and desorption efficiency were all investigated systematically. Under the optimized experimental conditions, the proposed method showed linear ranges (0.2–6.0 μg L⁻¹) with R² = 0.9992. The limits of detection (LODs) and quantification (LOQs) were 0.05 and 0.2 μg L⁻¹ (n = 3), respectively. Fe₃O₄@CS/GO/Ag exhibited outstanding extraction efficiency for RB, compared with CS-coated Fe₃O₄ nanoparticles (Fe₃O₄@CS) and GO-modified Fe₃O₄@CS (Fe₃O₄@CS/GO). The applicability of the proposed method was investigated by analyzing four real samples (waste water, soft drink, shampoo, and red pencil) and the spiked recoveries ranged between 94% and 97% with RSD ranging from 3% to 6%, which showed that the proposed method had satisfactory practicability and operability.

A novel magnetic composite modified with chitosan, graphene oxide and Ag nanoparticles, was successfully prepared as an efficient adsorbent for detection of rhodamine B combining with fluorescence technique.

Alkylammonium thiostannate inorganic/organic hybrids as high-performance photocatalysts with a decoupled adsorption–photodegradation mechanism

For traditional photocatalysts, the adsorption and successive surface reaction constitute a coupled and integrated process, owing to the limited number of catalytic active centres available. An attempt to boost the photocatalytic performance to optimize the adsorption and surface reaction process may be performed by exploring various photocatalyst infrastructures. Herein, we use a facile solvothermal method to synthesize a series of layered alkylammonium thiostannate hybrids, namely (baH)₂Sn₃S₇, (haH)₂Sn₃S₇ and (oaH)₂Sn₃S₇ (ba = butylamine, ha = hexylamine, oa = octylamine). The hybrids showed broad UV-visible light absorption with appropriate band gaps. The inorganic/organic amphiphilic infrastructure of these hybrids enables them to exhibit prominent ion-exchange properties for Rhodamine B, with a large capacity over a wide pH range (1–11). And the adsorbed Rhodamine B is photodegraded within 30 minutes. A mechanistic study indicates that the adsorption and photodegradation steps are performed at the organic and inorganic layers within these hybrids, respectively, which are decoupled and independent. We conclude that the high-performance integrated adsorption–photodegradation ability is a consequence of the lipophilicity of intercalated alkylammonium and the photocatalysis performance of the 2D [Sn₃S₇]_n²ⁿ⁻ monolayers.

For traditional photocatalysts, the adsorption and successive surface reaction constitute a coupled and integrated process, owing to the limited number of catalytic active centres available.

Optimization and modeling of methyl orange adsorption onto polyaniline nano-adsorbent through response surface methodology and differential evolution embedded neural network

Presence of pigments and dyes in water bodies are growing tremendously and pose as toxic materials and have severe health effects on human and aquatic creatures. Treatments methods for removal of these toxic dyes along with other pollutants are growing in different dimensions, among which adsorption was found a cheaper and efficient method. In this study, the performance of polyaniline-based nano-adsorbent for removal of methyl orange (MO) dye from wastewater in a batch adsorption process is studied. Along with this to minimize the number of experiments and obtain optimal conditions, a multivariate predictive model based on response surface methodology (RSM) is developed. This is compared with data-driven modeling using the artificial neural network (ANN) which is integrated with differential evolution optimization (DEO) for prediction of the adsorption of MO. The interactive effects on MO removal efficiency with respect to independent process variables were investigated. The fit of the predictive model was found to good enough with R² = 0.8635. The optimal ANN architecture with 5-12-1 topology resulted in higher R² and lower RMSE of 0.9475 and 0.1294 respectively. Pearson's Chi-square measure which provides a good measurement scale for weighing the goodness of fit is found to be 0.005 and 0.038 for RSM and ANN-DEO respectively, and other statistical metrics evaluated in this study further confirms that the ANN-DEO is very superior over RSM for model predictions.

Preparation of magnesium silicate/carbon composite for adsorption of rhodamine B

The surface area and pore structure, electrostatic interaction and functional groups are the main adsorption mechanisms.