Electrochemical co-preparation of cobalt sulfide/reduced graphene oxide composite for electrocatalytic activity and determination of H2O2 in biological samples

Voltammetric determination of hydrogen peroxide at decorated palladium nanoparticles/poly 1,5-diaminonaphthalene modified carbon-paste electrode

In this work, palladium nanoparticles (PdNPs)/p1,5-DAN/ carbon paste electrode (CPE) and p1,5-DAN/CPE sensors have been developed for determination of hydrogen peroxide. Both sensors showed a highly sensitive and selective electrochemical behaviour, which were derived from a large specific area of poly 1,5 DAN and super excellent electroconductibility of PdNPs. PdNPs/p1,5-DAN/CPE exhibited excellent performance over p1,5-DAN/CPE. Thus, it was used for detecting hydrogen peroxide (H2O2) with linear ranges of 0.1 to 250 µM and 0.2 to 300 µM as well as detection limits (S/N = 3) of 1.0 and 5.0 nM for square wave voltammetry (SWV) and cyclic voltammetry (C.V) techniques, respectively. The modified CPE has good reproducibility, adequate catalytic activity, simple synthesis and stability of peak response during H2O2 oxidation on long run that exceeds many probes. Both reproducibility and stability for H2O2 detection are attributable to the PdNPs immobilized on the surface of p1,5-DAN/CPE. The modified CPE was used for determining H2O2 in real specimens with good stability, sensitivity, and reproducibility.

Polyethyleneimine-assisted formation of Ag-SiO2 hybrid microspheres for H2O2 sensing and SERS applications

Herein, we report a simple, cost-effective, and eco-friendly approach for producing polyethyleneimine (PEI)-assisted silver nanoparticle-supported silica microspheres through evaporation-induced assembly (EIA). The silica-PEI microspheres obtained through EIA consisted of highly trapped PEI molecules owing to their electrosorption onto oppositely charged silica colloids. The trapped PEI molecules in the microspheres played a crucial role in linking silver ions to form silver ion-PEI complexes, which were then reduced to form silver nanoparticles. Further, the complex interactions between PEI and silica colloids led to enhanced porosity in the microspheres, enabling the efficient adsorption of Ag ions. The characterization of the Ag-SiO2 microspheres was carried out using various techniques, including field-emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), and Fourier transform infrared (FTIR) spectroscopy, which confirmed the successful formation of Ag nanoparticles on microspheres, and a plausible formation mechanism is elucidated. The Ag-SiO2 microspheres exhibited good sensing properties for hydrogen peroxide (H2O2), with an estimated limit of detection of 1.08 mM and a sensitivity of 0.033 μA mM-1 mm-2. The microspheres were also used as a surface-enhanced Raman scattering (SERS) substrate, which demonstrated high sensitivity in detecting rhodamine 6G down to a concentration of 2 × 10-6 M. The present approach elucidates a promising alternative to conventional methods that face challenges, such as scalability issues, complex and cumbersome synthesis procedures, and the use of strong reducing agents. With the potential for industrial-level scalability, this method offers a viable strategy for producing Ag-SiO2 microspheres with possible applications in biomedical and sensing technologies.

Recent Developments and Perspectives of Cobalt Sulfide-Based Composite Materials in Photocatalysis

Photocatalysis, as an inexpensive and safe technology to convert solar energy, is essential for the efficient utilization of sustainable renewable energy sources. Earth-abundant cobalt sulfide-based composites have generated great interest in the field of solar fuel conversion because of their cheap, diverse structures and facile preparation. Over the past 10 years, the number of reports on cobalt sulfide-based photocatalysts has increased year by year, and more than 500 publications on the application of cobalt sulfide groups in photocatalysis can be found in the last three years. In this review, we initially summarize the four common strategies for preparing cobalt sulfide-based composite materials. Then, the multiple roles of cobalt sulfide-based cocatalysts in photocatalysis have been discussed. After that, we present the latest progress of cobalt sulfide in four fields of photocatalysis application, including photocatalytic hydrogen production, carbon dioxide reduction, nitrogen fixation, and photocatalytic degradation of pollutants. Finally, the development prospects and challenges of cobalt sulfide-based photocatalysts are discussed. This review is expected to provide useful reference for the construction of high-performance cobalt sulfide-based composite photocatalytic materials for sustainable solar-chemical energy conversion.

Electrophoretic Deposition of Co3O4 Particles/Reduced Graphene Oxide Composites for Efficient Non-Enzymatic H2O2 Sensing

In this work, the facile fabrication of Co₃O₄ particles/reduced graphene oxide (Co₃O₄/rGO) composites on Indium tin oxide (ITO) slide was achieved by an electrophoretic deposition and annealing process. The deposition time and ratio of the precursors were optimized. Structural characterization and chemical composition investigation indicated successful loading of Co₃O₄ particles on graphene sheets. When applied as a non-enzymatic H₂O₂ sensor, Co₃O₄/rGO showed significant electrocatalytic activity, with a wide linear range (0.1-19.5 mM) and high sensitivity (0.2247 mA mM^-1 cm^-2). The good anti-interference ability, reproducibility, and long-term stability of the constructed sensor were also presented. The application of Co₃O₄/rGO in real sample analysis was evaluated in human urine sample with satisfactory results, indicating the feasibility of the sensor in physiological and medical applications.

Hybridization of Co3S4 and Graphitic Carbon Nitride Nanosheets for High-performance Nonenzymatic Sensing of H2O2

The development of efficient H₂O₂ sensors is crucial because of their multiple functions inside and outside the biological system and the adverse effects that a higher concentration can cause. This work reports a highly sensitive and selective non-enzymatic electrochemical H₂O₂ sensor achieved through the hybridization of Co₃S₄ and graphitic carbon nitride nanosheets (GCNNS). The Co₃S₄ is synthesized via a hydrothermal method, and the bulk g-C₃N₄ (b-GCN) is prepared by the thermal polycondensation of melamine. The as-prepared b-GCN is exfoliated into nanosheets using solvent exfoliation, and the composite with Co₃S₄ is formed during nanosheet formation. Compared to the performances of pure components, the hybrid structure demonstrates excellent electroreduction towards H₂O₂. We investigate the H₂O₂-sensing performance of the composite by cyclic voltammetry, differential pulse voltammetry, and amperometry. As an amperometric sensor, the Co₃S₄/GCNNS exhibits high sensitivity over a broad linear range from 10 nM to 1.5 mM H₂O₂ with a high detection limit of 70 nM and fast response of 3 s. The excellent electrocatalytic properties of the composite strengthen its potential application as a sensor to monitor H₂O₂ in real samples. The remarkable enhancement of the electrocatalytic activity of the composite for H₂O₂ reduction is attributed to the synergistic effect between Co₃S₄ and GCNNS.

Nickel Cobalt Telluride Nanorods for Sensing the Hydrogen Peroxide in Living Cells

In this study, we report about the preparation of nickel cobalt telluride nanorods (NiCoTe NRs) by the hydrothermal method using ascorbic acid and cetyltrimethylammonium bromide as reducing agents. The NiCoTe NRs (NCT 1 NRs) were characterized through use of different methods. The nonlinear optical measurements were carried out using Z-scan techniques. The results give the nonlinear absorption that arises from the combined two photon absorption and free carrier absorption. NCT 1 has an excellent electrocatalytic activity toward hydrogen peroxide with a sensitivity of 3464 μA mM^-1 cm^-2, a wide linear range of 0.002-1835 μM, and the lower detection limit of 0.02 μM, and the prepared electrode was strong in sensing in vivo H₂O₂ free from raw 264.7 cells. Therefore, the binary transition metal chalcogenide based nanostructures have promising potential in live cell biosensing applications.

Recent Advances in Electrochemical Sensing of Hydrogen Peroxide (H2O2) Released from Cancer Cells

Cancer is by far the most common cause of death worldwide. There are more than 200 types of cancer known hitherto depending upon the origin and type. Early diagnosis of cancer provides better disease prognosis and the best chance for a cure. This fact prompts world-leading scientists and clinicians to develop techniques for the early detection of cancer. Thus, less morbidity and lower mortality rates are envisioned. The latest advancements in the diagnosis of cancer utilizing nanotechnology have manifested encouraging results. Cancerous cells are well known for their substantial amounts of hydrogen peroxide (H₂O₂). The common methods for the detection of H₂O₂ include colorimetry, titration, chromatography, spectrophotometry, fluorimetry, and chemiluminescence. These methods commonly lack selectivity, sensitivity, and reproducibility and have prolonged analytical time. New biosensors are reported to circumvent these obstacles. The production of detectable amounts of H₂O₂ by cancerous cells has promoted the use of bio- and electrochemical sensors because of their high sensitivity, selectivity, robustness, and miniaturized point-of-care cancer diagnostics. Thus, this review will emphasize the principles, analytical parameters, advantages, and disadvantages of the latest electrochemical biosensors in the detection of H₂O₂. It will provide a summary of the latest technological advancements of biosensors based on potentiometric, impedimetric, amperometric, and voltammetric H₂O₂ detection. Moreover, it will critically describe the classification of biosensors based on the material, nature, conjugation, and carbon-nanocomposite electrodes for rapid and effective detection of H₂O₂, which can be useful in the early detection of cancerous cells.

Construction of a Label-Free Electrochemical Immunosensor Based on Zn-Co-S/Graphene Nanocomposites for Carbohydrate Antigen 19-9 Detection

Nanocomposites of the binary transition metal sulfide Zn-Co-S/graphene (Zn-Co-S@G) were synthesized through a one-step hydrothermal method. They may be useful in the construction of an electrochemical immunosensor for carbohydrate antigen 19-9 (CA19-9) detection. Zn-Co-S dot-like nanoparticles uniformly covered the surface of graphene to form an interconnected conductive network, ensuring strong interaction between transition metal sulfide and graphene, which can expose numerous electroactive sites leading to the improvement of the amplified electrochemical signal toward a direct reduction of H2O2. Thus, the construction of an electrochemical immunosensor using Zn-Co-S@G nanocomposites showed outstanding sensing properties for detecting CA19-9. The constructed electrochemical immunosensor exhibited a good linear relationship in the range of 6.3 U·mL-1-300 U·mL-1, with the limit of detection at 0.82 U·mL-1, which makes it a promising candidate for an electrochemical immunosensor.

Gold nanoparticles plated porous silicon nanopowder for nonenzymatic voltammetric detection of hydrogen peroxide

A voltammetric approach was developed for the selective and sensitive determination of hydrogen peroxide using Au plated porous silicon (PSi) nanopowder modified glassy carbon electrode (GCE). The AuNPs-PSi hybrid structure was synthesized via stain etching procedure followed by an immersion plating method to deposit AuNPs onto PSi via a simple galvanic displacement reaction with no external reducing agent to convert Au³⁺ to Au⁰. The as-fabricated AuNPs-PSi catalyst was successfully characterized by XRD, Raman, FTIR, XPS, SEM, TEM and EDS techniques. Well crystalline nature of the as-fabricated hybrid structure with AuNPs size ranging from 5 to 40 nm was observed. The specific surface area and total pore volume for both PSi and AuNPs plated PSi were evaluated using N₂ adsorption isotherm technique. Cyclic voltammetry and electrochemical impedance spectroscopy techniques were applied to investigate the catalytic efficiency of AuNPs-PSi modified electrode compared to pure PSi/GCE and unmodified GCE. The sensing performance of the active material modified GCE was thoroughly examined with linear sweep voltammetry (LSV) and square wave voltammetry (SWV) techniques. The AuNPs-PSi/GCE exhibited a remarkable linear dynamic range between 2.0 and 13.81 mM (for LSV) and 0.5-6.91 mM for (SWV) with high sensitivity and low detection limit of 10.65 μAmM^-1cm^-2 and 14.84 μM for LSV, whereas 10.41 μAmM^-1cm^-2 and 15.16 μM using SWV techniques, respectively. The fabricated sensor electrode showed excellent anti-interfering ability in the presence of several common biomolecules as well as demonstrated good operational stability and reproducibility with low relative standard deviation. Moreover, the modified electrode showed acceptable recovery of H₂O₂ in a real sample analysis. Thus, the developed AuNPs-PSi hybrid nanomaterial represents an excellent electrocatalyst for the efficient detection and quantification of H₂O₂ by the electrochemical approach.

Biosensors Based on Advanced Sulfur-Containing Nanomaterials

In recent years, sulfur-containing nanomaterials and their derivatives/composites have attracted much attention because of their important role in the field of biosensor, biolabeling, drug delivery and diagnostic imaging technology, which inspires us to compile this review. To focus on the relationships between advanced biomaterials and biosensors, this review describes the applications of various types of sulfur-containing nanomaterials in biosensors. We bring two types of sulfur-containing nanomaterials including metallic sulfide nanomaterials and sulfur-containing quantum dots, to discuss and summarize the possibility and application as biosensors based on the sulfur-containing nanomaterials. Finally, future perspective and challenges of biosensors based on sulfur-containing nanomaterials are briefly rendered.

Sonochemical synthesis of gum guar biopolymer stabilized copper oxide on exfoliated graphite: Application for enhanced electrochemical detection of H2O2 in milk and pharmaceutical samples

A novel and cost-effective synthesis of biopolymer-based organic and inorganic composite materials have received substantial attention in a broad range application including electroanalysis of small molecules. In this perspective, we report the synthesis of gum guar (guar) biopolymer stabilized cupric oxide decorated on exfoliated graphite (GR-guar/CuO) composite. Different physicochemical characterization methods were used to confirm the successful exfoliation of graphite and formation of the GR-guar/CuO composite. A simple sonochemical method has been used for the preparation of guar stabilized exfoliated graphite (GR-guar). The flower-like CuO on GR-guar and guar stabilized CuO (CuO-guar) composites were synthesized using a hydrothermal method. Cyclic voltammetric studies revealed that the GR-guar/CuO composite modified screen-printed carbon electrode (SPCE) had enhanced electro-reduction ability towards H₂O₂ than GR-guar and pristine graphite/CuO-guar modified SPCEs. Under optimized experimental conditions, the GR-guar/CuO composite modified electrode detects H₂O₂ in the response ranges from 0.02 to 1296.6 µM. The sensor shows a lower detection limit of 5.8 nM with high sensitivity. The as-prepared GR-guar/CuO composite sensor is highly reproducible and had excellent selectivity and practicality towards the detection of H₂O₂. Consequently, the fabricated sensor can be used for the accurate detection of H₂O₂ in real samples.

Rational design and facile synthesis of binary metal sulfides VS2-SnS2 hybrid with functionalized multiwalled carbon nanotube for the selective detection of neurotransmitter dopamine

In this work, we report a sensitive and selective electrochemical sensor for the detection of dopamine (DA) neurotransmitter based on VS₂-SnS₂/f-MWCNT hybrids. Herein, the binary metal sulfide (VS₂-SnS₂) was synthesized via single step hydrothermal route and hybrids with f-MWCNT via the ultrasonication process. The as-prepared VS₂-SnS₂/f-MWCNT hybrids were characterized through the FESEM, EDX and elemental mapping, TEM, XPS, Raman and XRD techniques. The electrochemical performance and catalytic activity of the modified electrodes were probed using electrochemical impedance spectra (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Interestingly, DPV results exhibits an appreciable linear range from 0.025 to 1017 μM and LOD of 0.008 μM. The selectivity study was performed to prove the high selectivity of the VS₂-SnS₂/f-MWCNT hybrids modified electrode. Furthermore, the practical applicability of the DA sensor was scrutinized in human serum sample and rat brain sample.

Electrospun CuO-ZnO nanohybrid: Tuning the nanostructure for improved amperometric detection of hydrogen peroxide as a non-enzymatic sensor

Hydrogen peroxide (H₂O₂) is a by-product of some biochemical processes which is catalyzed by enzymes such as glucose oxidase (GOx), cholesterol oxidase (ChoOx), etc and its overproduction in living cells can trigger cancer growth and various diseases. Therefore, H₂O₂ sensing is of great importance in the determination of diseases as well as industries and environmental health plans. We produced ZnO-CuO nanofibers by electrospinning method for non-enzymatic electrochemical H₂O₂ sensing. The sensing properties of the carbon paste electrode (CPE) modified with ZnO (0.3 wt%)/CuO (0.7 wt%) nanofibers (named as ZnO3-CuO7) for detection of H₂O₂ were explored in phosphate-buffered saline (PBS) at pH ∼ 7.4 solution. The ZnO3-CuO7 nanofiber exhibited the lowest charge transfer resistance and the highest electrocatalytic performance among other modified electrodes for detection of H₂O₂ and considered as an optimized sample. The effect of scan rate and H₂O₂ concentration in the reduction process were also investigated by cyclic voltammetry (CV) and the mechanism for the electrochemical reaction of H₂O₂ at the surface of the optimized electrode was studied. The diffusion coefficient of H₂O₂ and the catalytic rate constant were evaluated by chronoamperometry as 1.65 × 10^-5 cm² s^-1 and 6 × 10³ cm³ mol^-1 s^-1, respectively. Furthermore, amperometric detection of H₂O₂ with a low detection limit of 2.4 µM and a wide linear range of 3 to 530 µM were obtained. Meanwhile, the optimized electrode displayed no recognizable response towards some biomolecules such as ascorbic acid, uric acid, dopamine and glucose. The obtained results confirmed that the modified electrode shows high sensitivity and selectivity as a H₂O₂ biosensor with improved reproducibility and stability.

A review on graphene-based nanocomposites for electrochemical and fluorescent biosensors

Biosensors with high sensitivity, selectivity and a low limit of detection, reaching nano/picomolar concentrations of biomolecules, are important to the medical sciences and healthcare industry for evaluating physiological and metabolic parameters.