Heteroatom-rich porous organic polymers constructed by benzoxazine linkage with high carbon dioxide adsorption affinity

Construction of Benzoxazine-linked One-Dimensional Covalent Organic Frameworks Using the Mannich Reaction

Covalent polymerization of organic molecules into crystalline one-dimensional (1D) polymers is effective for achieving desired thermal, optical, and electrical properties, yet it remains a persistent synthetic challenge for their inherent tendency to adopt amorphous or semicrystalline phases. Here we report a strategy to synthesize crystalline 1D covalent organic frameworks (COFs) composing quasi-conjugated chains with benzoxazine linkages via the one-pot Mannich reaction. Through [4+2] and [2+2] type Mannich condensation reactions, we fabricated stoichiometric and sub-stoichiometric 1D covalent polymeric chains, respectively, using doubly and singly linked benzoxazine rings. The validity of their crystal structures has been directly visualized through state-of-the-art cryogenic low-dose electron microscopy techniques. Post-synthetic functionalizations of them with a chiral MacMillan catalyst produce crystalline organic photocatalysts that demonstrated excellent catalytic and recyclable performance in light-driven asymmetric alkylation of aldehydes, affording up to 94 % enantiomeric excess.

Robust Nitrogen-Doped Microporous Carbon via Crown Ether-Functionalized Benzoxazine-Linked Porous Organic Polymers for Enhanced CO2 Adsorption and Supercapacitor Applications

Nitrogen-doped carbon materials, characterized by abundant microporous and nitrogen functionalities, exhibit significant potential for carbon dioxide capture and supercapacitors. In this study, a class of porous organic polymer (POP) were successfully synthesized by linking Cr-TPA-4BZ-Br4 and tetraethynylpyrene (Py-T). The model benzoxazine monomers of Cr-TPA-4BZ and Cr-TPA-4BZ-Br4 were synthesized using the traditional three-step method [involving CH═N formation, reduction by NaBH4, and Mannich condensation]. Subsequently, the Sonogashira coupling reaction connected the Cr-TPA-4BZ-Br4 and Py-T monomers, forming Cr-TPA-4BZ-Py-POP. The successful synthesis of Cr-TPA-4BZ-Br4 and Cr-TPA-4BZ-Py-POP was confirmed through various analytical techniques. After verifying the successful synthesis of Cr-TPA-4BZ-Py-POP, carbonization and KOH activation procedures were conducted. These crucial steps led to the formation of poly(Cr-TPA-4BZ-Py-POP)-800, a carbon material with a structure akin to graphite. In practical applications, poly(Cr-TPA-4BZ-Py-POP)-800 exhibited a noteworthy CO2 adsorption capacity of 4.4 mmol/g, along with specific capacitance values of 397.2 and 159.2 F g-1 at 0.5 A g-1 (measured in a three-electrode cell) and 1 A g-1 (measured in a symmetric coin cell), respectively. These exceptional dual capabilities stem from the optimal ratio of heteroatom doping. The outstanding performance of poly(Cr-TPA-4BZ-Py-POP)-800 microporous carbon holds significant promise for addressing contemporary energy and environmental challenges, making substantial contributions to both sectors.

Selective Capturing of the CO2 Emissions Utilizing Ecological (3-Mercaptopropyl)trimethoxysilane-Coated Porous Organic Polymers in Composite Materials

Capturing carbon dioxide (CO2) is still a major obstacle in the fight against climate change and the reduction of greenhouse gas emissions. To address this problem, we employed a simple Friedel-Crafts alkylation to investigate the effectiveness of porous organic polymers (POPs) based on triphenylamine (TPA) and trihydroxy aryl terms derived from chloranil (CH), designated as TPA-CH POP. We then treated the TPA-CH POP with (3-mercaptopropyl)trimethoxysilane (3-MPTS), forming a TPA-CH POP-SH nanocomposite to enhance CO2 capture. Utilizing FTIR, solid-state NMR, SEM, TEM, along with XPS techniques, the molecular makeup, morphological characteristics, as well as physical features of TPA-CH POP and the TPA-CH POP-SH nanocomposite were thoroughly explored. Upon scorching to 800 °C, the TPA-CH POP-SH nanocomposite demonstrated more thermal durability over TPA-CH POP, achieving a char yield of up to 71.5 wt.%. The TPA-CH POP-SH nanocomposite displayed a 2.5-times better CO2 capture, as well as a comparable adsorption capacity of 48.07 cm3 g-1 at 273 K. Additionally, we found that the TPA-CH POP-SH nanocomposite exhibited an improved CO2/nitrogen (N2) selectivity versus the original TPA-CH POP. Typical enthalpy changes for CO2 capture were somewhat increased by the 3-MPTS coating, indicating greater binding energies between CO2 molecules and the adsorbent surface. Our outcomes demonstrate that a TPA-CH POP composite coated with MPTS is a viable candidate for effective CO2 capture uses. Our findings encourage the investigation of different functional groups and optimization strategies.

Harmonizing Between Chemical Functionality and Surface Area of Porous Organic Polymeric Nanotraps for Tuning Carbon Dioxide Capture

The energy sector has demonstrated significant enthusiasm for investigating post-combustion CO2 capture, storage, and separation. However, the practical application of current porous adsorbents is impeded by challenges related to cost competitiveness, stability, and scalability. Intregation of heteroatoms in the porous organic polymers (POPs) dispense it more susceptible for CO2 adsorption to attenuate green house gases. In this regard, two hydroxy rich hypercrosslinked POPs, namely Ph/Tt-POP have been developed by one-pot condensation polymerization using a facile synthetic strategy. The high surface areas of both the Ph/Tt-POP (1057 and 893 m2g-1, respectively), and the heteroatom functionality in the POP framework instigated us to explore our material for CO2 adsorption study. The CO2 uptake capacities in Ph/Tt-POP are found to be 2.45 and 2.2 mmol g-1, at 273 K respectively. Further, in-situ static 13C NMR experiment shows that CO2 molecules in Tt-POP appear to be less mobile than those in Ph-POP which probably due to the presence of triazine functional groups along with high abundant -OH groups in the Tt-POP framework. An in-depth study of the CO2 adsorption mechanism by density functional theory (DFT) calculations also shows that CO2 adsorption at the cages formed by two benzyl rings represents the most stable interaction and CO2 molecule is more favorably adsorbed on the Ph-POP with the more negative interaction energies values compared to that of Tt-POP. Further, Non-covalent interaction (NCI) plot reveals that CO2 molecules adsorb more on the Ph-POP than Tt-POP, which can be explain by hydrogen bond formation in case of Tt-POP repeating units turning aside CO2 molecule to interact with the Ph component. Overall, our present study reflects the comprising effects of surface area of the solid adsorbents as well as their functionality can be beneficial for developing efficient hypercrosslinked porous polymers as solid CO2 adsorbent.

Elucidating the Role of Atomically Dilute Copper Centers Impregnating a Phosphamide Polymer for the Preferential Hydrogen Evolution Reaction over CO2 Reduction

Organic polymers have attracted considerable interest in designing a multifunctional electrocatalyst. However, the inferior electro-conductivity of such metal-free polymers is often regarded as a shortcoming. Herein, a nitrogen- and phosphorus-rich polymer with phosphamide functionality (PAP) in the repeating unit has been synthesized from diaminopyridine (DAP) and phenylphosphonic dichloride (PPDC) precursors. The presence of phosphamide oxygen and pyridine nitrogen in the repeating unit of PAP leads to the coordination of the CuII ion and the incorporation of 3.29 wt % in the polymer matrix (Cu30@PAP) when copper salt is used to impregnate the polymer. Combined with a spectroscopic, microscopic, and DFT study, the coordination and geometry of copper in the PAP matrix has been established to be a distorted square planar CuII in a N2O2 ligand environment where phosphamide oxygen and pyridine nitrogen of the PAP coordinate to the metal center. The copper incorporation in the PAP modulates its electrocatalytic activity. On the glassy carbon electrode, PAP shows inferior activity toward the hydrogen evolution reaction (HER) in 0.5 M H2SO4 while 3 wt % copper incorporation (Cu30@PAP) significantly improves the HER performance with an overpotential of 114 mV at 10 mA cm-2. The notable electrochemical activity with Cu30@PAP occurs due to the impregnation of Cu(II) in PAP, improved electro-kinetics, and better charge transfer resistance (Rct). When changing the electrolyte from H2SO4 to CO2-saturated bicarbonate solution at nearly neutral pH, PAP shows HER as the dominant pathway along with the partial reduction of CO2 to formate. Moreover, the use of Cu30@PAP as an electrolcatalyst could not alter the predominant HER path, and only 20% Faradaic efficiency for the CO2 reduced products has been achieved. Post-chronoamperometric characterization of the recovered catalyst suggests an unaltered valence state of the copper ion and the intact chemical structure of PAP. DFT studies unraveled that the copper sites of Cu30@PAP promote water adsorption while phosphamide-NH of the PAP can weakly hold the CO2 adduct via a hydrogen bonding interaction. A detailed calculation has pointed out that the tetra-coordinated copper centers present in the PAP frame are the reactive sites and that the formation of the [CuI-H] intermediate is the rate-limiting step for both HER and its competitive side reaction, i.e., CO2 reduction to formate or CO formation. The high proton concentration in the electrolyte of pH < 7 leads to HER as the predominant pathway. This combined experimental and theoretical study has highlighted the crucial role of copper sites in electrocatalysis, emphasizing the plausible reason for electrocatalytic selectivity.

Nitrogen-Rich Porous Organic Polymers from an Irreversible Amine-Epoxy Reaction for Pd Nanocatalyst Carrier

Nitrogen-rich porous organic polymers were fabricated through a nonreversible ring-opening reaction from polyamines and polyepoxides (PAEs). The epoxide groups reacted with both primary and secondary amines provided by the polyamines at different epoxide/amine ratios with polyethylene glycol as the solvent to form the porous materials. Fourier-transform infrared spectroscopy confirmed the occurrence of ring opening between the polyamines and polyepoxides. The porous structure of the materials was confirmed through N₂ adsorption-desorption data and scanning electron microscopy images. The polymers were found to possess both crystalline and noncrystalline structures, as evidenced by X-ray diffraction and high-resolution transmission electron microscopy (HR-TEM) results. The HR-TEM images revealed a thin, sheet-like layered structure with ordered orientations, and the lattice fringe spacing measured from these images was consistent with the interlayer of the PAEs. Additionally, the selected area electron diffraction pattern indicated that the PAEs contained a hexagonal crystal structure. The Pd catalyst was fabricated in situ onto the PAEs support by the NaBH₄ reduction of the Au precursor, and the size of the nano-Pd was about 6.9 nm. The high nitrogen content of the polymer backbone combined with Pd noble nanometals resulted in excellent catalytic performance in the reduction of 4-nitrophenol to 4-aminophenol.

Novel Carbazole-Based Porous Organic Polymer for Efficient Iodine Capture and Rhodamine B Adsorption

A new porous organic polymer (CTF-CAR), which takes carbazole as the electron-rich center unit and thiophenes as the auxiliary group, has been synthesized through catalyst-free Schiff-base polymerization. At the same time, the structure, thermal stability, morphology, and other basic properties of the polymer were analyzed by IR, NMR, TGA, and SEM. Then, CTF-CAR was applied to iodine capture and rhodamine B adsorption. Due to its strong electron donor ability and abundant heteroatom binding sites, which have a positive effect on the interaction between the polymer network and adsorbates, CTF-CAR exhibits high uptake capacities for iodine vapor and rhodamine B as 2.86 g g-1 and 199.7 mg g-1, respectively. The recyclability test also confirmed that it has good reusability. We found that this low-cost and catalyst-free synthetic porous organic polymer has great potential for the treatment of polluted water and iodine capture.

Facile preparation of oxygen-rich porous polymer microspheres from lignin-derived phenols for selective CO2 adsorption and iodine vapor capture

Lignin is a natural O-containing aromatic amorphous polymers from the residues of biorefinery and industrial papermaking, it can derive lots of aromatic phenol chemicals used as industrial raw materials by an efficient depolymerization, and then produce synthetic polymers. Here, we selected six aromatic units from the liquid products of lignin depolymerization, and tried to prepare diversified O-rich hyper-cross-linked polymers (HCPs) by one-pot Friedel-Crafts alkylation reaction for CO₂ and iodine vapor capture. HCP1, HCP2, and HCP3 microspheres possessed similar porous structure with Brunauer-Emmett-Teller (BET) surface areas (S_BET) of 14.1-20.6 m²/g and high O content (26.34-30.68 wt%), while HCP4, HCP5, and HCP6 were composed of many bulks with 3D networks structure, and showed larger S_BET of 15.4-246.9 m²/g and relatively low O content (18.48-26.38 wt%). The results indicated that the chemical position and quantities of substituent groups (methoxy and alkyl) into lignin-derived units had evident impact on their morphology and textural parameters. These HCPs exhibited considerable CO₂ uptake (64.1 mg/g) and selectivity (35.2) at 273 K， and high iodine vapor uptake (192.3 wt%). Moreover, the performance analysis implied that the S_BET and pore volume of these HCPs had not played the dominated roles in the CO₂ and I₂ adsorption, while their pore size distribution, O-functional groups, and electron density will be more important for the capture of the both. This study will offer a facile synthesis of O-rich polymer microsphere adsorbents based on the green and sustainable lignin.

Ethynylene-linked multifunctional benzoxazines: effect of ethynylene group and packing on thermal behavior

Benzoxazine is a promising next-generation thermosetting resin featuring catalyst-free curing, high thermal stability, and low volume shrinkage upon curing. Mono-, di- and tri-functional benzoxazines, 3-(4-(phenylethynyl)phenyl)-3,4-dihydro-2H-[1,3]benzoxazine (1), 1,4-bis((4-(2H-3(4H)-[1,3]benzoxazinyl)phenyl)ethynyl)benzene (2) and 1,3,5-tris((4-(2H-3(4H)-[1,3]benzoxazinyl)phenyl)ethynyl)benzene...

Solvent-free synthesis of a formaldehyde-free benzoxazine monomer: study of its curing acceleration effect for commercial benzoxazine

A new 2-substituted benzoxazine bearing a phenol was blended with commercial benzoxazine for improving curing and thermomechanical properties.

Conjugated microporous organic polymer as fluorescent chemosensor for detection of Fe3+ and Fe2+ ions with high selectivity and sensitivity

A conjugated microporous organic polymer (TPA-Bp) comprised of triphenylamine (TPA) and 2,2'-bipyridine-5,5'-diformaldehyde (Bp) was prepared via the Schiff-base reaction under ambient conditions. TPA-Bp is an amorphous and microporous spherical nanoparticle with very high stability. TPA-Bp suspension in DMF displayed strong fluorescence emission and selective fluorescence quenching response towards Fe³⁺ and Fe²⁺ ions. The fluorescence intensity of TPA-Bp at 331 nm presents linear relationship with the concentrations of both Fe³⁺ and Fe²⁺ with low detection limits of 1.02 × 10^-5 M for Fe³⁺ and 5.37 × 10^-6 M for Fe²⁺. The results of X-ray photoelectron spectroscopy (XPS) and Fourier Transform infrared spectroscopy (FTIR) confirm the selective coordination of N atoms of pyridine unit with Fe ions. The fluorescence quenching of TPA-Bp upon the addition of Fe³⁺/Fe²⁺ ions can be attributed to the absorption competition quenching (ACQ) mechanism and the energy transfer between TPA-Bp and Fe³⁺/Fe²⁺ ions. This work demonstrates that the conjugated microporous polymers are promising candidates as luminescent sensor for detection of the special analytes in practical applications.

Microporous Carbon and Carbon/Metal Composite Materials Derived from Bio-Benzoxazine-Linked Precursor for CO2 Capture and Energy Storage Applications

There is currently a pursuit of synthetic approaches for designing porous carbon materials with selective CO2 capture and/or excellent energy storage performance that significantly impacts the environment and the sustainable development of circular economy. In this study we prepared a new bio-based benzoxazine (AP-BZ) in high yield through Mannich condensation of apigenin, a naturally occurring phenol, with 4-bromoaniline and paraformaldehyde. We then prepared a PA-BZ porous organic polymer (POP) through Sonogashira coupling of AP-BZ with 1,3,6,8-tetraethynylpyrene (P-T) in the presence of Pd(PPh3)4. In situ Fourier transform infrared spectroscopy and differential scanning calorimetry revealed details of the thermal polymerization of the oxazine rings in the AP-BZ monomer and in the PA-BZ POP. Next, we prepared a microporous carbon/metal composite (PCMC) in three steps: Sonogashira coupling of AP-BZ with P-T in the presence of a zeolitic imidazolate framework (ZIF-67) as a directing hard template, affording a PA-BZ POP/ZIF-67 composite; etching in acetic acid; and pyrolysis of the resulting PA-BZ POP/metal composite at 500 °C. Powder X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller (BET) measurements revealed the properties of the as-prepared PCMC. The PCMC material exhibited outstanding thermal stability (Td10 = 660 °C and char yield = 75 wt%), a high BET surface area (1110 m2 g-1), high CO2 adsorption (5.40 mmol g-1 at 273 K), excellent capacitance (735 F g-1), and a capacitance retention of up to 95% after 2000 galvanostatic charge-discharge (GCD) cycles; these characteristics were excellent when compared with those of the corresponding microporous carbon (MPC) prepared through pyrolysis of the PA-BZ POP precursors with a ZIF-67 template at 500 °C.

Benzoxazine Porous Organic Polymer as an Efficient Solid-Phase Extraction Adsorbent for the Enrichment of Chlorophenols from Water and Honey Samples

Porous organic polymers have gained great research interest in the field of adsorption. A benzoxazine porous organic polymer (BoxPOP) constructed from p-phenylenediamine, 1,3,5-trihydroxybenzene and paraformaldehyde was fabricated and explored as an adsorbent for solid-phase extraction (SPE) of four chlorophenols from water and honey samples. Under the optimized SPE conditions, the response linearity for the analysis of the SPE extract of the chlorophenols by high performance liquid chromatography-diode array detector was observed in the range of 0.2-40.0 ng mL-1 for water samples and 5.0-400.0 ng g-1 for honey samples. The method detection limits of the analytes were 0.06-0.08 ng mL-1 for water samples and 1.5-2.0 ng g-1 for honey samples. The recoveries of the analytes from fortified water and honey samples ranged from 84.8 to 119.0% with the relative standard deviations below 8.4%. The results indicate that the prepared BoxPOP is an effective adsorbent for the chlorophenols. The established method provides an alternative approach for the determination of chlorophenols in real samples.

Understanding the role of soft linkers in designing hepatzine-based polymeric frameworks as heterogeneous (photo)catalyst

The emerging class of heptazine-based polymeric materials has shown potential candidature as photocatalyst materials for hydrogen evolution. At the same time, they have shown promising application as solid base materials to catalyse various organic transformations. Thus, the material design rationale needs to be developed around the heptazine-based polymeric frameworks in order to specifically design task specific materials. Herein, we utilised controlled reaction conditions to synthesize the desired polymeric networks with trichloroheptazine as precursor. Material design strategy employed nitrogen rich [tris(2-aminoethylamine) and hydrazine] as soft linkers to understand the effect on band structure of developed heptazine-based polymeric networks. The developed polymeric networks were explored as platform to study systematically the effect on their respective photophysical properties and understand their surface basicity. The framework having aminoalkyl linker showed superior activity in photocatalysis as well as heterogeneous base catalysis. Further, model catalysts revealed the importance of N-atoms as active basic sites in these systems.

Ultrastable conductive microporous covalent triazine frameworks based on pyrene moieties provide high-performance CO2 uptake and supercapacitance

Two pyrene-functionalized CTFs through ionothermal treatment TCNPy in the presence of molten zinc chloride at 500 °C, which displayed high-performance CO₂ uptake and supercapacitance.

Triazinetriamine-derived porous organic polymer-supported copper nanoparticles (Cu-NPs@TzTa-POP): an efficient catalyst for the synthesis of N-methylated products via CO2 fixation and primary carbamates from alcohols and urea

Copper nanoparticles incorporated triazinetriamine derived porous organic polymer based catalyst was synthesized for catalytic production N-methylated amines and primary carbamates.

Polysilazane as a new foaming agent to prepare high-strength, low-density epoxy foam

Polysilazane (PSN2) was used as chemical foaming agent to prepare epoxy foam for the first time. Using the new foaming agent, epoxy foams with high strength and low density were successfully prepared. The density of epoxy foam can be tuned from 0.321 to 0.151 g cm^-3 by changing the content of PSN2 from 2.50 to 7.50 wt%, with the compressive strength varied from 7.39 to 1.25 MPa. The morphology, porosity, mechanical property, thermal conductivity and adhesive property of foams with different polysilazane content were investigated. Besides, the effect of polyamine curing agent and surfactant on foams was also investigated to optimize the as-prepared epoxy foam.

Tetraphenylethene-decorated functional polybenzoxazines: post-polymerization synthesis via benzoxazine–isocyanide chemistry and application in probing and catalyst fields

Benzoxazine–isocyanide chemistry (BIC) was utilized to construct functional polybenzoxazines via a post-polymerization protocol, and the application of corresponding polymers was investigated.

Hydrothermal preparation of hierarchical ZIF-L nanostructures for enhanced CO2 capture

A zeolitic imidazolate framework (ZIF-L) with hierarchical morphology was synthesized through hydrothermal method. The hierarchical product consists of ZIF-L leaves with length of several micrometers, width of 1 ∼ 2 μm and thickness of ∼300 nm cross connected symmetrically. It was found that the hydrothermal temperature is crucial for the formation of such hierarchical nanostructure. The formation mechanism was investigated to be a secondary crystal growth process. The hierarchical ZIF-L has larger surface area compared with the two-dimensional (2D) ZIF-L leaves. Subsequently, the hierarchical ZIF-L exhibited enhanced CO₂ adsorption capacity (1.56 mmol·g^-1) as compared with that of the reported two-dimensional ZIF-L leaves (0.94 mmol·g^-1). This work not only reveals a new strategy for the formation of hierarchical ZIF-L nanostructures, but also supplies a potential material for CO₂ capture.