Facile modification of nanodiamonds with hyperbranched polymers based on supramolecular chemistry and their potential for drug delivery

Enhancing colloidal stability of nanodiamond via surface modification with dendritic molecules for optical sensing in physiological environments

Pre-treatment of diamond surface in low-temperature plasma for oxygenation and in acids for carboxylation was hypothesized to promote the branching density of the hyperbranched glycidol polymer. This was expected to increase the homogeneity of the branching level and suppress interactions with proteins. As a result, composite nanodiamonds with reduced hydrodynamic diameters that are maintained in physiological environments were anticipated. Surfaces of 140-nm-sized nanodiamonds were functionalized with oxygen and carboxyl groups for grafting of hyperbranched dendritic polyglycerol via anionic ring-opening polymerization of glycidol. The modification was verified with Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Dynamic light scattering investigated colloidal stability in pH-diverse (2-12) solutions, concentrated phosphate-buffered saline, and cell culture media. Thermogravimetric analysis of nanodiamonds-protein incubations examined non-specific binding. Fluorescence emission was tested across pH conditions. Molecular dynamics simulations modeled interparticle interactions in ionic solutions. The hyperbranched polyglycerol grafting increased colloidal stability of nanodiamonds across diverse pH, high ionic media like 10 × concentrated phosphate-buffered saline, and physiological media like serum and cell culture medium. The hyperbranched polyglycerol suppressed non-specific protein adsorption while maintaining intensive fluorescence of nanodiamonds regardless of pH. Molecular modelling indicated reduced interparticle interactions in ionic solutions correlating with the improved colloidal stability.

Polymeric Nanoparticles for Drug Delivery

The recent emergence of nanomedicine has revolutionized the therapeutic landscape and necessitated the creation of more sophisticated drug delivery systems. Polymeric nanoparticles sit at the forefront of numerous promising drug delivery designs, due to their unmatched control over physiochemical properties such as size, shape, architecture, charge, and surface functionality. Furthermore, polymeric nanoparticles have the ability to navigate various biological barriers to precisely target specific sites within the body, encapsulate a diverse range of therapeutic cargo and efficiently release this cargo in response to internal and external stimuli. However, despite these remarkable advantages, the presence of polymeric nanoparticles in wider clinical application is minimal. This review will provide a comprehensive understanding of polymeric nanoparticles as drug delivery vehicles. The biological barriers affecting drug delivery will be outlined first, followed by a comprehensive description of the various nanoparticle designs and preparation methods, beginning with the polymers on which they are based. The review will meticulously explore the current performance of polymeric nanoparticles against a myriad of diseases including cancer, viral and bacterial infections, before finally evaluating the advantages and crucial challenges that will determine their wider clinical potential in the decades to come.

Physico-chemical properties of the association of cetyltrimethylammonium bromide and bovine serum albumin mixture in aqueous-organic mixed solvents

Herein, we have investigated the association behavior of bovine serum albumin (BSA) and cetyltrimethylammonium bromide (CTAB) using the conductivity method in H₂O and H₂O + organic mixed solvents at different temperatures. The association phenomenon was detected from the deviation of the conductivity changes with enhancing the surfactant concentration and changes of numerous physico-chemical properties, such as CMC, α, β and thermodynamic variables (∆G⁰_m, ∆H⁰_m and ∆S⁰_m). The values of CMC for the CTAB + BSA system in 10 % (v/v) solvents follow the trend: CMC_water < CMC_water+DMSO < CMC_water+AN < CMC_water+DX < CMC_water+DMF. The interaction of BSA with CTAB is notably influenced due to a change of temperature and extent of hydration of BSA and surfactant. The obtained values of -∆G⁰_m manifest that the association of BSA and CTAB mixture is a spontaneous process, while the values of -∆G⁰_m in presence of 10 % (v/v) aq. organic solvents come out in the given sequence: -∆G_m^o (H₂O + DMSO) > ∆G_m^o (H₂O + DMF) > -∆G_m^o (H₂O + DX) > -∆G_m^o (H₂O + AN). The H-bonding, ion-dipole, along with the hydrophobic interactions, are believed to be the binding interactions between BSA and CTAB in the study media.

Carbon-based nanostructures for cancer therapy and drug delivery applications

Synthesis, design, characterization, and application of carbon-based nanostructures (CBNSs) as drug carriers have attracted a great deal of interest over the past half of the century because of their promising chemical, thermal, physical, optical, mechanical, and electrical properties and their structural diversity. CBNSs are well-known in drug delivery applications due to their unique features such as easy cellular uptake, high drug loading ability, and thermal ablation. CBNSs, including carbon nanotubes, fullerenes, nanodiamond, graphene, and carbon quantum dots have been quite broadly examined for drug delivery systems. This review not only summarizes the most recent studies on developing carbon-based nanostructures for drug delivery (e.g. delivery carrier, cancer therapy and bioimaging), but also tries to deal with the challenges and opportunities resulting from the expansion in use of these materials in the realm of drug delivery. This class of nanomaterials requires advanced techniques for synthesis and surface modifications, yet a lot of critical questions such as their toxicity, biodistribution, pharmacokinetics, and fate of CBNSs in biological systems must be answered.

Nanoparticles-mediated CRISPR-Cas9 gene therapy in inherited retinal diseases: applications, challenges, and emerging opportunities

Inherited Retinal Diseases (IRDs) are considered one of the leading causes of blindness worldwide. However, the majority of them still lack a safe and effective treatment due to their complexity and genetic heterogeneity. Recently, gene therapy is gaining importance as an efficient strategy to address IRDs which were previously considered incurable. The development of the clustered regularly-interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein 9 (Cas9) system has strongly empowered the field of gene therapy. However, successful gene modifications rely on the efficient delivery of CRISPR-Cas9 components into the complex three-dimensional (3D) architecture of the human retinal tissue. Intriguing findings in the field of nanoparticles (NPs) meet all the criteria required for CRISPR-Cas9 delivery and have made a great contribution toward its therapeutic applications. In addition, exploiting induced pluripotent stem cell (iPSC) technology and in vitro 3D retinal organoids paved the way for prospective clinical trials of the CRISPR-Cas9 system in treating IRDs. This review highlights important advances in NP-based gene therapy, the CRISPR-Cas9 system, and iPSC-derived retinal organoids with a focus on IRDs. Collectively, these studies establish a multidisciplinary approach by integrating nanomedicine and stem cell technologies and demonstrate the utility of retina organoids in developing effective therapies for IRDs.

A resonance Rayleigh scattering method for sensitive detection of chitosan based on supramolecular complex and mechanism study

A convenient and sensitive resonance Rayleigh scattering (RRS) method for the detection of chitosan (CTS) has been developed via forming Cu-Zn supramolecular complex by complexation reaction, hydrophobic force and electrostatic attraction. The microstructure of the complex was characterized by FT-IR, zeta potential, scanning electron microscope (SEM), UV-vis and RRS. Furthermore, the interaction mechanism among Cu(II), Zn(II), CTS and sodium dodecyl benzene sulfonate (SDBS) was studied. The results revealed that CTS and Cu(II) or Zn(II) formed a supramolecular complex with RRS enhancement in weak acid condition. In the presence of SDBS, the RRS intensity of CTS-Cu(II)-SDBS or CTS-Zn(II)-SDBS was significantly higher than that of the binary system without SDBS at the same CTS concentration. The RRS intensity of CTS-Cu(II)-Zn(II)-SDBS was higher than that of CTS-Cu(II)-SDBS and CTS-Zn(II)-SDBS. The RRS intensity increased linearly with the increase of CTS concentration made it possible to determine CTS quantitatively. In the range extending from 0.10 to 5.00 μg/mL, the equation of linear regression was ΔI=1848.8c-138.3 with a correlation coefficient 0.9996, and the detection limit was estimated to be 37.96 ng/mL. The study was successfully applied for the determination of CTS in health food samples, suggesting its great potential toward CTS analysis.

Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics

Polymeric hydrogels are fascinating platforms as 3D scaffolds for tissue repair and delivery systems of therapeutic molecules and cells. Among others, methacrylated gelatin (GelMA) has become a representative hydrogel formulation, finding various biomedical applications. Recent efforts on GelMA-based hydrogels have been devoted to combining them with bioactive and functional nanomaterials, aiming to provide enhanced physicochemical and biological properties to GelMA. The benefits of this approach are multiple: i) reinforcing mechanical properties, ii) modulating viscoelastic property to allow 3D printability of bio-inks, iii) rendering electrical/magnetic property to produce electro-/magneto-active hydrogels for the repair of specific tissues (e.g., muscle, nerve), iv) providing stimuli-responsiveness to actively deliver therapeutic molecules, and v) endowing therapeutic capacity in tissue repair process (e.g., antioxidant effects). The nanomaterial-combined GelMA systems have shown significantly enhanced and extraordinary behaviors in various tissues (bone, skin, cardiac, and nerve) that are rarely observable with GelMA. Here we systematically review these recent efforts in nanomaterials-combined GelMA hydrogels that are considered as next-generation multifunctional platforms for tissue therapeutics. The approaches used in GelMA can also apply to other existing polymeric hydrogel systems.

Modification of carbon-based nanomaterials by polyglycerol: recent advances and applications

Hyperbranched polymers, a subclass of dendritic polymers, mimic nature's components such as trees and nerves. Hyperbranched polyglycerol (HPG) is a hyperbranched polyether with outstanding physicochemical properties, including high water-solubility and functionality, biocompatibility, and an antifouling feature. HPG has attracted great interest in the modification of different objects, in particular carbon-based nanomaterials. In this review, recent advances in the synthesis and application of HPG to modify carbon-based nanomaterials, including graphene, carbon nanotubes, fullerene, nanodiamonds, carbon dots, and carbon fibers, are reviewed.

A supramolecular hybrid sensor based on cucurbit[8]uril, 2D-molibdenum disulphide and diamond nanoparticles towards methyl viologen analysis

We develop an electrochemical sensor by using 2D-transition metal dichalcogenides (TMD), specifically MoS₂, and nanoparticles stabilized with cucurbit[8]uril (CB[8]) incorporated together with them. Two different nanoparticles are assayed: diamond nanoparticles (DNPs) and gold nanoparticles (AuNp). 0D materials, together with TMD, provide increased conductivity and active surface while the macrocycle CB[8] affords selectivity towards the guest methyl viologen (MV²⁺), also named paraquat. Glassy Carbon (GC) electrodes are modified by drop-casting of suspensions of MoS₂, followed by either a CB[8]-DNPs hybrid dispersion or a CB[8]-AuNp suspension. Atomic force microscopy is employed for the morphological characterization of the electrochemical sensor surface while cyclic voltammetry and electrochemical impedance spectroscopy techniques allow the electrochemical characterization of the sensor. The well-stablished signals of CB[8]-encapsulated MV²⁺ arise in voltammetric measurements when the macrocycle modifies the 0D-materials. Once the sensor construction and differential pulse voltammetry parameters have been optimized for quantification purposes, calibration procedures are performed with the platform GC/MoS₂/CB[8]-DNPs. This sensing platform shows linear relations between peak intensity and the MV²⁺ concentration in the linear concentration range of (0.73-8.0) · 10^-6 M with a limit of detection of 2.2 · 10^-7 M. Analyses of river water samples fortified with MV²⁺ at the μM level shows recoveries of 100% with RSD values of 6.4% (n = 3).

Fluorescent nanorods based on 9,10-distyrylanthracene (DSA) derivatives for efficient and long-term bioimaging

Fluorescent nanoparticles based on 9,10-distyrylanthracene (DSA) derivatives (4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))bis(N,N-dimethylaniline) (NDSA) and 4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))dibenzonitrile (CNDSA)) were prepared using an ultrasound aided nanoprecipitation method. The morphologies of the fluorescent nanoparticles could be controlled by adjusting the external ultrasonication time. NDSA or CNDSA could form spherical nanodots (NDSA NDs, CNDSA NDs) in a THF-H2O mixture with an 80% or 70% water fraction when the ultrasonication time was 30 s. When the ultrasonication time was prolonged to 10 min, NDSA and CNDSA could assemble into nanorods (NDSA NRs, CNDSA NRs). Meanwhile, the sizes of NDSA NRs and CNDSA NRs could be controlled by adjusting the water content in the mixture. As the water fraction was increased from 60% to 80%, the sizes of NDSA and CNDSA nanorods or nanodots reduced from 238.4 nm to 140.3 nm, and 482 nm to 198.4 nm, respectively. When the water fraction was up to 90%, irregular morphologies of NDSA and CNDSA could be observed. The nanoparticles exhibited intense fluorescence emission, good anti-photobleaching properties, as well as excellent stability and biocompatibility. In vitro cell imaging experiments indicated that the nanorods prepared by this simple method had the potential to be used for efficient and noninvasive long-term bioimaging.

Nanodiamonds Inhibit Cancer Cell Migration by Strengthening Cell Adhesion: Implications for Cancer Treatment

Nanodiamonds (NDs) are a type of biocompatible nanomaterial with easily modified surfaces and are considered as promising candidates in biomedicine. In this work, the inhibition of tumor cell migration by carboxylated nanodiamonds (cNDs) was investigated. AFM-based single cell adhesion and F-actin staining experiments demonstrated that cNDs treatment could enhance cell adhesion and impair assembly of the cytoskeleton. The mechanism analysis of the regulatory protein expression level also proved that cNDs could inhibit the migration of Hela cells by preventing the epithelial-mesenchymal transition (EMT) process through the transforming growth factor β (TGF-β) signaling pathway. The in vivo pulmonary metastasis model also showed that cNDs effectively reduced the metastasis of murine B16 melanoma cells. In summary, cNDs have been demonstrated to inhibit cancer cell migration in vitro and decrease tumor metastasis in vivo. Therefore, cNDs might have potential utility for specific cancer treatment.

Graphene oxide and its derivatives as promising In-vitro bio-imaging platforms

Intrinsic fluorescence and versatile optical properties of Graphene Oxide (GO) in visible and near-infrared range introduce this nanomaterial as a promising candidate for numerous clinical applications for early-diagnose of diseases. Despite recent progresses in the impact of major features of GO on the photoluminescence properties of GO, their modifications have not yet systematically understood. Here, to study the modification effects on the fluorescence behavior, poly ethylene glycol (PEG) polymer, metal nanoparticles (Au and Fe3O4) and folic acid (FA) molecules were used to functionalize the GO surface. The fluorescence performances in different environments (water, DMEM cell media and phosphate buffer with two different pH values) were assessed through fluorescence spectroscopy and fluorescent microscopy, while Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) and Scanning electron microscopy (SEM) were utilized to evaluate the modifications of chemical structures. The modification of GO with desired molecules improved the photoluminescence property. The synthesized platforms of GO-PEG, GO-PEG-Au, GO-PEG-Fe3O4 and GO-PEG-FA illustrated emissions in three main fluorescence regions (blue, green and red), suitable for tracing and bio-imaging purposes. Considering MTT results, these platforms potentially positioned themselves as non-invasive optical sensors for the diagnosis alternatives of traditional imaging agents.

Supramolecular self-assembled drug delivery system (SADDs) of vancomycin and tocopherol succinate as an antibacterial agent: in vitro, in silico and in vivo evaluations

In this study self-assembled drug delivery system (SADDs) composed of a hydrophobic d-α-tocopherol succinate (TS) and a hydrophilic vancomycin (VCM) were formulated, and its potential for enhancing the antibacterial activity of VCM against Staphylococcus aureus (SA) and Methicillin-resistant Staphylococcus aureus (MRSA) were explored. The SADDs were synthesized via supramolecular complexation, then characterized for in silico, in vitro and in vivo studies. In silico studies confirmed the self-assembly of VCM/TS into NPs. The size, surface charge and drug loading of the SADDs was ˂100 nm, -27 mV and 68%, respectively. The SADDs were non-hemolytic and biosafe. A sustained release of VCM from SADDs was noted, with 52.2% release after 48 hr. The in vitro antibacterial test showed a twofold decrease in Minimum inhibitory concentration (MIC) against SA and MRSA, and a significantly higher reduction in MRSA biofilms compared to bare VCM. Further, in silico studies confirmed strong and stable binding of TS to MRSA efflux pumps. The in vivo study using mice skin infection models showed a 9.5-fold reduction in bacterial load after treatment with SADDs, in comparison with bare VCM. These findings affirmed that VCM/TS NPs as a promising novel nano-delivery for treating bacterial infections.

Effects of temperature and polyols on the ciprofloxacin hydrochloride-mediated micellization of sodium dodecyl sulfate

Herein, a conductivity method was engaged to explore the effects of a fluoroquinolone drug, namely ciprofloxacin hydrochloride (CFH)/CFH + polyols (organic compounds with multiple hydroxyl groups (glucose and fructose)), on the aggregation phenomenon of sodium dodecyl sulfate (SDS) at different temperatures (298.15–318.15 K) while maintaining a gap of 5 K. In this study, the critical micelle concentration (cmc) of the SDS/SDS + CFH mixture in water and polyols media was determined from plots of the specific conductivity versus the concentration of SDS to gain knowledge of the effects of CFH/CFH + polyols on the micelle formation behavior of SDS. The cmc value of the surfactant decreases in the presence of CFH in an aqueous medium; thus, CFH favors the micellization of SDS. The cmc values of SDS and the SDS + CFH mixture were enhanced in polyols media. The cmc values of SDS/SDS + CFH show a U-shaped behavior with temperature. The counterion dissociation (α) of the pure surfactant is higher in the presence of the drug and is further enhanced through an increase in the CFH concentration in water/polyols media. Different thermodynamic parameters, such as the Gibbs free energy of micellization , standard enthalpy , entropy , different transfer energies and enthalpy–entropy compensation parameters of micellization were determined and illustrated in detail to compare these parameters between the pure SDS and SDS + CFH mixture in polyols media. The negative values of for the SDS/SDS + CFH mixture in all cases indicate spontaneous micelle formation. The and values indicate the presence of both hydrophobic and electrostatic interactions amongst the studied components.

A conductivity method was used to see effects of a ciprofloxacin hydrochloride (CFH)/CFH + polyols (organic compounds with multiple hydroxyl groups (glucose and fructose)) on aggregation phenomenon of sodium dodecyl sulfate (SDS) at 298.15–318.15 K.

Fluorescence biosensor based on silicon quantum dots and 5,5'-dithiobis-(2-nitrobenzoic acid) for thiols in living cells

An efficient and stable fluorescent sensor is described for the detection and imaging of thiols. It is making use of silicon quantum dots (SiQDs) which can be rapidly prepared. They were characterized by transmission electron microscopy, X-ray power diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectrometry. The SiQDs have an absorption maximum at 300 nm and displayed blue-green fluorescence with excitation/emission maxima at 410/480 nm. A mixture of SiQDs and 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) exhibits strong fluorescence emission which however is quenched within 30 s of incubation with thiols. This is assumed to be due to an inner filter effect caused by the reaction of DTNB and thiols. The following thiols were tested: cysteine, homocysteine, and glutathione. The sensor has a linear response in the 3-100 μM thiol concentration range, and the LODs are between 0.80 and 0.96 μM. The sensor displays low cytotoxicity and was applied to fluorescence imaging of MCF-7 cells and Hela cells where it demonstrated excellent biocompatibility.

Double-detecting fluorescent sensor for ATP based on Cu2+ and Zn2+ response of hydrazono-bis-tetraphenylethylene

Although all kinds of sensors with unique detecting ability for one guest were reported, the fluorescence sensor with multiple detecting abilities was seldom presented. This work designed and synthesized a novel AIE fluorescence probe bearing double detecting for ATP based on Cu²⁺ and Zn²⁺ response of hydrazono-bis-tetraphenylethylene (Bis-TPE). Bis-TPE was prepared in 82% yield with simple procedure. It exhibited strong red AIE fluorescence based on the large conjugated electron effect in aqueous media. It showed outstanding selective sensing abilities for Cu²⁺ by strong fluorescence quenching and for Zn²⁺ by red-orange fluorescence change. The sensing mechanism of 1:1 stoichiometric ratios was confirmed by ¹H NMR and MS study. The strong red fluorescence of Bis-TPE + Cu²⁺ system could be recovered by adding ATP. The orange fluorescence of Bis-TPE + Zn²⁺ system could be quenched by adding Cu²⁺ and then was recovered by adding ATP. These double detecting abilities for ATP with the "off-on" red fluorescence in Bis-TPE + Cu²⁺ system and "allochroic-off-on" orange fluorescence in Bis-TPE + Zn²⁺+Cu²⁺ system were successfully applied to test Cu²⁺, Zn²⁺ and ATP in test paper and living cell imaging, displaying the good application prospects for sensing Cu²⁺, Zn²⁺ and double detecting ATP in the complicated environment.

Amphiphilic hyperbranched polymers: synthesis, characterization and self-assembly performance

Abstract

A series of amphiphilic hyperbranched polymers (AHP-s, the “s” refers to the algebra of AHP) were synthesized by the reaction between hydroxyl-terminated hyperbranched polymers (HBP-s, the “s” refers to the algebra of HBP) and palmitoyl chloride. FTIR, NMR and GPC were used to determine the structure of AHP-s, the results showed that AHP-s exhibits core-shell structure. The thermal properties of polymers were investigated by DSC and TGA. It was found that AHP-2, AHP-3 and AHP-4 display higher thermal stability than AHP-1 (AHP-1, AHP-2, AHP-3 and AHP-4 represent the first, second, third and fourth generation AHP, respectively). Furthermore, the self-assembly performance of AHP-s in THF solvent was investigated by TEM and SEM. Finally, the encapsulation capacity of the AHP-s for methyl orange (MO) was explored at different concentrations of AHP-s and pH conditions. It was found that AHP-s is capable of accommodating hydrophilic guest MO. Moreover, the higher generation of AHP-s, the stronger encapsulation capacity obtained. And the encapsulation capacity closely associated with the pH of encapsulation system.

Graphical abstract

Biomimetic carbon nanotubes for neurological disease therapeutics as inherent medication

Nowadays, nanotechnology is revolutionizing the approaches to different fields from manufacture to health. Carbon nanotubes (CNTs) as promising candidates in nanomedicine have great potentials in developing novel entities for central nervous system pathologies, due to their excellent physicochemical properties and ability to interface with neurons and neuronal circuits. However, most of the studies mainly focused on the drug delivery and bioimaging applications of CNTs, while neglect their application prospects as therapeutic drugs themselves. At present, the relevant reviews are not available yet. Herein we summarized the latest advances on the biomedical and therapeutic applications of CNTs in vitro and in vivo for neurological diseases treatments as inherent therapeutic drugs. The biological mechanisms of CNTs-mediated bio-medical effects and potential toxicity of CNTs were also intensely discussed. It is expected that CNTs will exploit further neurological applications on disease therapy in the near future.

Advances of Nano-Structured Extended-Release Local Anesthetics

Extended-release local anesthetics (LAs) have drawn increasing attention with their promising role in improving analgesia and reducing adverse events of LAs. Nano-structured carriers such as liposomes and polymersomes optimally meet the demands of/for extended-release, and have been utilized in drug delivery over decades and showed satisfactory results with extended-release. Based on mature technology of liposomes, EXPAREL, the first approved liposomal LA loaded with bupivacaine, has seen its success in an extended-release form. At the same time, polymersomes has advances over liposomes with complementary profiles, which inspires the emergence of hybrid carriers. This article summarized the recent research successes on nano-structured extended-release LAs, of which liposomal and polymeric are mainstream systems. Furthermore, with continual optimization, drug delivery systems carry properties beyond simple transportation, such as specificity and responsiveness. In the near future, we may achieve targeted delivery and controlled-release properties to satisfy various analgesic requirements.

Complexation and fluorescence behavior of proflavin with chemically engineered amine capped carbon nanodots and its subsequent release into DNA environments

Amine capped carbon dots are prepared by pyrolysis of citric acid. Probable excited-state interactions between PF and CNDs have been studied. A controlled release of PF into ctDNA by CNDs shows their utility as an efficient drug delivery agent.

"Two in one": Simultaneous functionalization and DOX loading for fabrication of nanodiamond-based pH responsive drug delivery system

Nanodiamond (ND) has been widely studied as a new type of carbon nanomaterials that is expected to be used as a promising candidate in various fields especially in the field of biomedicine. However, its poor water dispersibility and insufficient controlled release limit its practical applications. In this paper, ND-based composites with pH-responsive hydrazone bonds were successfully prepared by a simple chemical reaction between ester groups and hydrazine hydrate, in which ester groups were conjugated on the surface of ND via thiol-ene click reaction. On the other hand, CHO-PEG and doxorubicin hydrochloride (DOX) were linked on the carriers through formation of hydrazone bonds, resulting in improving water dispersibility and high drug loading capacity. The structure, thermal stability, surface morphology and particle size of ND carriers were characterized by different equipment. Results demonstrated that we have successfully prepared these functionalized ND. The release rate of DOX in acidic environment was significantly greater than that in normal physiological environment. More importantly, cell viability and optical imaging results showed that ND-based composites possess good biocompatibility, therapeutic effect, and could successfully transport DOX to HepG2 cells. Considering the above results, we believe that our new ND carriers will become promising candidates for intracellular controlled drug delivery and cancer treatment.

Polymer Microfibers Incorporated with Silver Nanoparticles: a New Platform for Optical Sensing

The enhanced sensitivity of up-conversion luminescence is imperative for the application of up-conversion nanoparticles (UCNPs). In this study, microfibers were fabricated after co-doping UCNPs with polymethylmethacrylate (PMMA) and silver (Ag) solutions. Transmission losses and sensitivities of UCNPs (tetrogonal-LiYF4:Yb3+/Er3+) in the presence and absence of Ag were investigated. Sensitivity of up-conversion luminescence with Ag (LiYF4:Yb3+/Er3+/Ag) is 0.0095 K-1 and reduced to (LiYF4:Yb3+/Er3+) 0.0065 K-1 without Ag at 303 K under laser source (980 nm). The UCNP microfibers with Ag showed lower transmission losses and higher sensitivity than without Ag and could serve as promising candidate for optical applications. This is the first observation of Ag-doped microfiber via facile method.

A novel nucleic acid based bio-assay toward recognition of Haemophilus influenza using bioconjugation and DNA hybridization method

Haemophilus influenza (H. influenza) is a gram negative coccobacillus pathogenic microorganism. H. influenza produces beta-lactamases, and it is also able to modify its penicillin-binding proteins, so it has gained resistance to the penicillin family of antibiotics. In this work, a novel sensitive approach was established for the monitoring of H. influenza using DNA based bio-assay. For the first time, specific sequence of thiolated probe of Haemophilus influenza (SH-5'-AAT TTT CCA ACT TTT TCA CCT GCA T-3') was immobilized on the surface of gold (Au) electrode. Square wave voltammetry (SWV) was carried out in toluidine blue (TB) solution for DNA hybridization and targeting of cDNA sequence of Haemophilus influenza. Field scanning electron microscope (FE-SEM) was applied to investigation of the electrode morphology and estimate of particle size. In the optimal conditions, the planned strategy could detect target DNA (5'-ATG CAG GTG AAA AAG TTG GAA AAT T-3') down to 1 ZM with a linear range from 1 μM to 1 ZM. Moreover, engineered geno-assay selectively differentiates the complementary sequence from target sequences with one, double and three base mismatch sequences.

Paper based immunosensing of ovarian cancer tumor protein CA 125 using novel nano-ink: A new platform for efficient diagnosis of cancer and biomedical analysis using microfluidic paper-based analytical devices (μPAD)

Ovarian cancer is the first and most important cause of malignancy death in women. Mucin 16 or MUC16 protein also known as carcinoma antigen 125 (CA 125) is the most commonly used glycoprotein for early stage diagnosis of ovarian cancer. In this work, a novel paper-based bio-device through hand writing of Ag/RGO (silver nanoparticles/reduced graphene oxide) nano-ink on the flexible paper substrate using pen-on-paper technology was developed. The prepared interface was used to the recognition of CA 125 protein in human biofluid. For this purpose, Ag/rGO nano-ink was synthesized by deposition of Ag nanoparticles onto graphene oxide sheets and the reduction of graphene oxide to rGO simultaneously. Conductivity and resistance of conductive lines were studied after drawing on photographic paper. Subsequently, to prepare a new and unique immuno-device, paper electrode modified by cysteamine caped gold nanoparticles (CysA/Au NPs) using electrochemical techniques. CysA is bonded by sulfur atoms with Au (CysA/Au NPs), and from the amine group with hydroxyl and carboxyl groups of Ag/RGO nano-ink deposited on the surface of paper-based electrodes (CysA/Au NPs/Ag-rGO). Then, anti-CA 125 antibody was immobilized on the electrode surface through Au NPs and CA 125 positively charged amine groups interaction. Atomic force microscopy, Transmission electron microscopy, Field emission scanning electron microscopy, and dynamic light scattering, were performed to identify the engineered immunosensor. Using chronoamperometry technique and under the optimized conditions, the low limit of quantitation (LLOQ) for the proposed immunoassay was recorded as 0.78 U/ml, which this evaluation was performed at highly linear range of 0.78-400 U/ml. The high sensitivity of the electrochemical immunosensor device is indicative of the ability of this immuno-device to detect early stages ovarian cancer.

Polymer/nanodiamond composites - a comprehensive review from synthesis and fabrication to properties and applications

Nanodiamond (ND) is an allotrope of carbon nanomaterials which exhibits many outstanding physical, mechanical, thermal, optical and biocompatibility characteristics. Meanwhile, ND particles possess unique spherical shape containing diamond-like structure at the core with graphitic carbon outer shell which intuitively contains many oxygen-containing functional groups at the outer surface. Such superior properties and unique structural morphology of NDs are essentially attractive to develop polymer composites with multifunctional properties. However, despite a long history from the discovery of NDs, which is dated back to the1960s, this nanoparticle has been less explored in the field of polymer (nano)composites compared with other carbon nanomaterials, e.g. carbon nanotube (CNT) and graphene. However, open literature indicates that research works in the field of polymer/ND (PND) composites have gained great momentum in the past half a decade. The present article provides a comprehensive review on recent achievements in ND based polymer composites. This review covers a very broad aspect from the synthesis, purification and functionalization of NDs to dispersion, preparation and fabrication of polymer/ND (PND) composites with a look in their recent applications for both structural and functional basis. Therefore, the review would be useful to pave the way for researchers to take some advancing steps in this respect.

Physicochemical data of oleic acid-poloxamer organogel for intravaginal voriconazole delivery

Functional polymeric nanoparticles have attracted attention for different biomedical applications, including drug delivery. Poloxamers (PL), a synthetic copolymers of poly(ethyleneoxide)-b-poly(propylene oxide)-b-poly(ethylene oxide), that exhibit thermoreversible behavior in aqueous solutions. Physicochemical properties of Oleic Acid-Poloxamer (OA-PL) organogel for intravaginal controlled Voriconazole (VRC) delivery were assessed using three different oils (isopropyl myristate - IPM, isopropyl palmitate - IPP, and oleic acid – OA, in order to select the most suitable oil phase for increasing the solubility of the drug and its dispersion in the final aqueous phase. Organogel structural organization was assessed by VRC partition coefficient, differential scanning calorimetry (DSC), rheological analysis, and drug release assay. These data are complementary to the research article entitled “Sodium alginate in oil-poloxamer organogels for intravaginal drug delivery: influence on structural parameters, drug release mechanisms, cytotoxicity and in vitro antifungal activity” - Materials Science and Engineering: C, 2019. 99: p. 1350–1361.