Enhanced room-temperature catalytic decomposition of formaldehyde on magnesium-aluminum hydrotalcite/boehmite supported platinum nanoparticles catalyst

A new samarium complex of 1,3-bis(pyridin-3-ylmethyl)thiourea on boehmite nanoparticles as a practical and recyclable nanocatalyst for the selective synthesis of tetrazoles

Boehmite is a natural and environmentally friendly compound. Herein boehmite nanoparticles were primarily synthesized and, then, their surface were modified via 3-choloropropyltrimtoxysilane (CPTMS). Afterwards, a new samarium complex was stabilized on the surface of the modified boehmite nanoparticles (Sm-bis(PYT)@boehmite). The obtained nanoparticles were characterized using thermogravimetric analysis (TGA), energy dispersive X-ray spectroscopy (EDS), Brunauer-Emmett-Teller (BET), wavelength dispersive X-ray spectroscopy (WDX), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), Inductively coupled plasma mass spectrometry (ICP-MS), dynamic light scattering (DLS), and X-ray diffraction (XRD) pattern. Sm-bis(PYT)@boehmite was used as an environmentally friendly, efficient, and organic-inorganic hybrid nanocatalyst in the homoselective synthesis of tetrazoles in polyethylene glycol 400 (PEG-400) as a green solvent. Notably, Sm-bis(PYT)@boehmite is stable and has a heterogeneous nature. Thus, it can be reused for several runs without any re-activation.

Platinum-Catalysed Selective Aerobic Oxidation of Methane to Formaldehyde in the Presence of Liquid Water

The aerobic, selective oxidation of methane to C1 -oxygenates remains a challenge, due to the more facile, consecutive oxidation of formed products to CO2 . Here, we report on the aerobic selective oxidation of methane under continuous flow conditions, over platinum-based catalysts yielding formaldehyde with a high selectivity (reaching 90 % for Pt/TiO2 and 65 % over Pt/Al2 O3 ) upon co-feeding water. The presence of liquid water under reaction conditions increases the activity strongly attaining a methane conversion of 1-3 % over Pt/TiO2 . Density-functional theory (DFT) calculations show that the preferential formation of formaldehyde is linked to the stability of the di-σ-hydroxy-methoxy species on platinum, the preferred carbon-containing species on Pt(111) at a high chemical potential of water. Our findings provide novel insights into the reaction pathway for the Pt-catalysed, aerobic selective oxidation of CH4 .

Improved oxygen activation over metal-organic-frameworks derived and zinc-modulated Co@NC catalyst for boosting indoor gaseous formaldehyde oxidation at room temperature

The indoor low-concentration formaldehyde (HCHO) removal in cobalt-based catalysts is still a "hot potato". In this work, metal-organic-frameworks (MOF)-derived and Zinc (Zn)-modulated new cobalt nanoparticles catalyst (CZ-Co@NC-800) was designed and prepared. The CZ-Co@NC-800 performed outstanding elimination activities for ~1 ppm HCHO at 25 °C. In the static test condition, it achieves complete HCHO removal in 3 h at a relative humidity (RH) of ~55%. Moreover, 90.18% HCHO removal ratio is held after five recycle tests. In the dynamic test condition, it remains the characteristic to eliminate around 95.89% of HCHO within 8 h under an RH of ~55% and a gas hourly space velocity (GHSV) of ~150,000 mL·h^-1g^-1. Such advanced results should be ascribed to large specific surface area bringing about more cobalt active sites; and it is also because residual Zn metal affects the electronic structure of CZ-Co@NC-800 and enhance the surface charge transfer rate, thus the activation and dissociation ability of oxygen is promoted. Besides, a short HCHO reaction path over CZ-Co@NC-800 which was clarified by the In situ DRIFTs is also a reason for excellent catalytic performance. This work represents a crucial addition to expand the family of cobalt-based catalysts for indoor HCHO elimination.

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Boosting carbonyl sulfide catalytic hydrolysis performance over N-doped Mg-Al oxide derived from MgAl-layered double hydroxide

Carbonyl sulfide (COS), the organic sulfur generated in the chemical industry, has been receiving more attention due to its environmental and economic influence. In this study N-doped MgAl-LDO catalyst was successfully prepared and tested for the COS hydrolysis reaction at low temperature, it was observed that the N species can be formed both in surface and bulk. Moreover, the basicity property and the H₂O adsorption-desorption property were remarkably improved due to the N-doping. Besides, the hydroxyl group can be formed more easily and more abundantly on N modified catalyst surface, which was beneficial to the COS adsorption and the remarkable improvement of catalytic performance. The catalytic hydrolysis performance can proceed for almost 1440 min without any deactivation at 70 °C. However, further increase of temperature was not beneficial to improve the catalytic performance due to the occurrence of H₂S oxidation side reaction. Furthermore, it was revealed that the surface hydroxyl groups were responsible for the adsorption of COS and then the formed surface transitional species reacted with the H₂O molecules. Hydrogen thiocarbonate and bicarbonate were the main reaction intermediate. The rate-determining step was IM6→IM7 i.e., a type transformation of bicarbonate.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

Hierarchical nanostructures self-assembled from δ-MnO2 ultrathin nanosheets and Mn3O4 octahedrons for efficient room-temperature HCHO oxidation

Self-assembling ultrathin active δ-MnO₂ nanosheets and Mn₃O₄ octahedrons into hierarchical texture enhances room-temperature formaldehyde oxidation at a low-level of Pt.

Utilization of metal-organic frameworks for the adsorptive removal of an aliphatic aldehyde mixture in the gas phase

Considerable efforts have been undertaken in the domain of air quality management for the removal of hazardous volatile organic compounds, particularly carbonyl compounds (CCs). In this study, the competitive sorptive removal of six CCs (namely, formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde, isovaleraldehyde, and valeraldehyde) was assessed using selected metal-organic frameworks (MOFs: MOF-5, MOF-199, UiO-66, and UiO-66-NH₂) and inexpensive commercial activated carbon as a reference sorbent. The sorption experiments were conducted using a mixture of the six CCs (formaldehyde and acetaldehyde at ∼1 Pa and propionaldehyde, butyraldehyde, isovaleraldehyde, and valeraldehyde at ∼0.2 Pa) together with 15 Pa water and 2.6 Pa methanol in 1 bar nitrogen. For all of the carbonyl compounds other than formaldehyde, MOF-199 showed the best 10% breakthrough performance ranging from 34 L g^-1 and 0.14 mol kg^-1 Pa^-1 for acetaldehyde to 1870 L g^-1 and 7.6 mol kg^-1 Pa^-1 for isovaleraldehyde. Among all the sorbents tested, UiO-66-NH₂ exhibited the best 10% breakthrough performance metrics towards the lightest formaldehyde which remains to be one of the most difficult targets for sorptive removal (breakthrough volume: 285 L g^-1 and partition coefficient: 1.1 mol kg^-1 Pa^-1). Theoretical density functional theory (DFT)-based computations were also conducted to provide better insights into the adsorbate-adsorbent interactions. Accordingly, the magnitude of adsorption energy increased with an increase in the CC molar mass due to an enhancement in the synergetic interaction between C[double bond, length as m-dash]O groups (in adsorbate molecules) and the MOF active centers (open metallic centers and/or NH₂ functionality) as the adsorbent. Such interactions were observed to result in strong distortion of MOF structures. In contrast, weak van der Waals attraction between the hydrocarbon "tail" of CC molecules and MOF linkers were seen to play a stabilizing role for the sorbent structure. The presence of the NH₂ group in the MOF structure was suspected to play a key role in capturing lighter CCs, while such an effect was less prominent for heavier CCs. Overall, the results of this study provided a basis for the establishment of an effective strategy to enhance the sorption capacity of MOFs against diverse carbonyl species.

Preparation of Lignocellulose-Based Activated Carbon Paper as a Manganese Dioxide Carrier for Adsorption and in-situ Catalytic Degradation of Formaldehyde

Formaldehyde is a colorless, highly toxic, and flammable gas that is harmful to human health. Recently, many efforts have been devoted to the application of activated carbon to absorb formaldehyde. In this work, lignocellulose-based activated carbon fiber paper (LACFP) loaded with manganese dioxide (MnO₂) was fabricated for the adsorption and in-situ catalytic degradation of formaldehyde. LACFP was prepared by two-stage carbonization and activation of sisal hemp pulp-formed paper and was then impregnated with manganese sulfate (MnSO₄) and potassium permanganate (KMnO₄) solutions; MnO₂ then formed by in situ growth on the LACFP base by calcination. The catalytic performance of MnO₂-loaded LACFP for formaldehyde was then investigated. It was found that the suitable carbonization conditions were elevating the temperature first by raising it at 10°C/min from room temperature to 280°C, then at 2°C/min from 280 to 400°C, maintaining the temperature at 400°C for 1 h, and then increasing it quickly from 400 to 700°C at 15°C/min. The conditions used for activation were similar to those for carbonization, with the temperature additionally being held at 700°C for 2 h. The conditions mentioned above were optimized to maintain the fiber structure and shape integrity of the paper, being conducive to loading with catalytically active substances. Regarding the catalytic activity of MnO₂-loaded LACFP, the concentration of formaldehyde decreased by 59 ± 6 ppm and the concentration of ΔCO₂ increased by 75 ± 3 ppm when the reaction proceeded at room temperature for 10 h. The results indicated that MnO₂-loaded LACFP could catalyze formaldehyde into non-toxic substances.

0D/2D CeO2 quantum dot/NiO nanoplate supported an ultralow-content Pt catalyst for the efficient oxidation of formaldehyde at room temperature

The 0D/2D CeO₂ quantum dot/NiO nanoplate supporting ultralow content of the Pt catalyst shows enhanced catalytic decomposition of formaldehyde at room temperature.

Bimetallic nickel molybdate supported Pt catalyst for efficient removal of formaldehyde at low temperature

Efficient removal of formaldehyde from indoor environments is of significance for human health. In this work, a typical binary transition metal oxide that could provide various oxidation states, β-NiMoO₄, was employed as a support to immobilize the active Pt component (Pt/NiMoO₄) for catalytic formaldehyde elimination at low ambient temperature (15°C). The results showed that the hydrothermal preparation temperature and time had a noticeable impact on the morphology and catalytic activity of the samples. The catalyst prepared with hydrothermal temperature of 150°C for 4 hr (Pt-150-4) exhibited superior catalytic activity and stability mainly due to its distinctly porous structure, relative abundance of adsorbed surface hydroxyls/water, and high oxidation ability, which resulted from the interaction of Pt with Ni and Mo of the bimetallic NiMoO₄ support. Our results might shed light on the rational design of multifunctional catalysts for removal of indoor air pollutants at low ambient temperature.

Hydroxyapatite-Supported Low-Content Pt Catalysts for Efficient Removal of Formaldehyde at Room Temperature

Indoor environmental quality directly affects the life quality and health of human beings, and therefore, it is highly vital to eliminate the volatile organic compounds especially formaldehyde (HCHO), which is regarded as one of the most common harmful pollutants in indoor air. Hydroxyapatite (HAP)-supported Pt (Pt/HAP) catalysts with a low content of Pt (0.2 wt %) obtained via hydrothermal and chemical reduction processes could effectively remove gaseous HCHO from the indoor environment at room temperature. The influence of modifier in the preparation on the catalyst activity was investigated. The HAP and HAP modified by sodium citrate and hexamethylenetetramine-supported 0.2 wt % Pt could completely decompose HCHO into CO2 and water, while HAP modified by sodium dodecyl-sulfate-supported Pt removed HCHO primarily via adsorption. The HAP modified by the sodium citrate catalyst exhibited superior catalytic performance of HCHO compared to the HAP and HAP modified by hexamethylenetetramine and sodium dodecyl-sulfate-supported Pt catalysts, which was mainly because of its higher surface Ca/P ratio providing more Lewis acidic sites (Ca2+) for co-operational capture of HCHO molecules and a larger amount of active oxygen species. Our results indicate that an optimized combination of functional supports and low-content noble metal nanoparticles could be a route to fabricate effective room-temperature catalysts for potential application in indoor air purification.

Ag Loading Enhanced Photocatalytic Activity of g-C3N4 Porous Nanosheets for Decomposition of Organic Pollutants

The g-C3N4 porous nanosheets with different loading amount of Ag nanoparticles (NPs) are successfully prepared by a simple liquid-phase reduction method. These Ag/g-C3N4 composites have an improved photocatalytic performance for decomposing organic pollutants compared with that of pure g-C3N4 nanosheets. Many measurements have been used for characterizing the samples, such as XRD, FTIR, UV-Vis DRS, PL, XPS, EDS, SEM, and TEM. In Ag/g-C3N4, the Ag NPs are uniformly coated on the g-C3N4 surface, the diameter is mainly in the range of 8~18 nanometers. Loading of Ag NPs expand the response to the visible light for g-C3N4 and increasing the producing rate of photogenerated e--h+ pairs. The loading of silver NPs obviously enhances the photocatalytic activity of C3N4 nanosheets toward the Rhodamine B (RhB) decomposition under the simulated sunlight irradiation. With different loading amounts of Ag NPs, Ag/g-C3N4 (3 wt% of Ag) showed the highest photocatalytic activity for RhB decomposition among these as-prepared samples, which is 10 times of the rate of pure C3N4. Based on the experimental results, a possible photocatalytic mechanism for Ag/g-C3N4 is proposed.