Nitrogen doped carbon quantum dots mediated silver phosphate/bismuth vanadate Z-scheme photocatalyst for enhanced antibiotic degradation

Photocatalytic degradation of organic pollutants by carbon quantum dots functionalized g-C3N4: A review

Graphitic carbon nitride (g-C₃N₄) has received much attention due to its unique characteristics of stable physicochemical features, facile preparation, and inexpensive cost. However, the bulk g-C₃N₄ has a weak capacity for pollutant degradation and needs to be modified for real application. Therefore, extensive research has been done on g-C₃N₄, and the discovery of the novel zero-dimensional nanomaterials known as carbon quantum dots (CQDs) provided it with a unique modification option. In this review, the development for the removal of organic pollutants by g-C₃N₄/CQDs was discussed. Firstly, the preparation of g-C₃N₄/CQDs were introduced. Then, the application and the degradation mechanism of g-C₃N₄/CQDs were briefly described. And the discussion of the influencing factors on g-C₃N₄/CQDs' ability to degrade organic pollutants came in third. Finally, the conclusions of photocatalytic degradation of organic pollutants by g-C₃N₄/CQDs and future perspectives followed. This review will strengthen the understanding of the photocatalytic degradation of real organic wastewater by g-C₃N₄/CQDs, including their preparation, application, mechanism, and influencing factors.

Potential of novel dual Z-scheme carbon quantum dots decorated MnIn2S4/CdS/Bi2S3 heterojunction for environmental applications

In this work, CQDs decorated MnIn₂S₄/CdS/Bi₂S₃ heterojunction was prepared successfully by hydrothermal technique for photocatalytic disinfection of Escherichia coli (E. coli) and mineralization of methyl orange (MO) dye. The charge transferal route and mineralization process in CQDs-MnIn₂S₄/CdS/Bi₂S₃ heterojunction were comprehensively investigated by advanced spectroscopic techniques. The improved visible-light activity and enhanced photo-generated charge transferal efficacy caused dual Z-scheme CQDs-MnIn₂S₄/CdS/Bi₂S₃ heterojunction to achieve boosted photodegradation ability. The catalytic degradation trend was followed as CQDs-MnIn₂S₄/CdS/Bi₂S₃ > MnIn₂S₄ > CdS > Bi₂S₃. The dye was mineralized within 180 min under visible light irradiation. The effect of reaction parameters, pH effect, catalyst dosage, and H₂O₂ addition on MO degradation was also investigated. The degradation rate was maximal at pH 4 with a pseudo-first-order rate constant, 0.0438 min^-1. The assessment of antibacterial properties revealed that CQDs-MnIn₂S₄/CdS/Bi₂S₃ composite effectively inactivated E. coli under visible light. Scavenging experiments, transient photocurrent response, and electron spin resonance spectroscopy suggested that ^•[Formula: see text] and holes were the dominant reactive species. The Z-scheme heterojunction is recyclable up to ten photocatalytic cycles according to recycling experiments. This research indicates the importance of dual Z-scheme CQDs decorated MnIn₂S₄/CdS/Bi₂S₃ heterojunction in wastewater remediation.

Effective photodegradation of antibiotics by guest-host synergy between photosensitizer and bismuth vanadate: Underlying mechanism and toxicity assessment

The removal of antibiotics in wastewater has attracted increasing attention. Herein, a superior photosensitized photocatalytic system was developed with acetophenone (ACP) as the guest photosensitizer, bismuth vanadate (BiVO₄) as the host catalyst and poly dimethyl diallyl ammonium chloride (PDDA) as the bridging complex, and used for the removal of sulfamerazine (SMR), sulfadiazine (SDZ) and sulfamethazine (SMZ) in water under simulated visible light (λ > 420 nm). The obtained ACP-PDDA-BiVO₄ nanoplates attained a removal efficiency of 88.9%-98.2% for SMR, SDZ and SMZ after 60 min reaction and achieved kinetic rate constant approximately 10, 4.7 and 13 times of BiVO₄, PDDA-BiVO₄ and ACP-BiVO₄, respectively, for SMZ degradation. In the guest-host photocatalytic system, ACP photosensitizer was found to have a great superiority in enhancing the light absorption, promoting the surface charge separation-transfer and efficient generation of holes (h⁺) and superoxide radical (·O₂^-), greatly contributing to the photoactivity. The SMZ degradation pathways were proposed based on the identified degradation intermediates, involving three main pathways of rearrangement, desulfonation and oxidation. The toxicity of intermediates was evaluated and the results demonstrated that the overall toxicity was reduced compared with parent SMZ. This catalyst maintained 92% photocatalytic oxidation performance after five cyclic experiments and displayed a co-photodegradation ability to others antibiotics (e.g., roxithromycin, ciprofloxacin et al.) in effluent water. Therefore, this work provides a facile photosensitized strategy for developing guest-host photocatalysts, which enabling the simultaneous antibiotics removal and effectively reduce the ecological risks in wastewater.

Carbon Dots Based Photoinduced Reactions: Advances and Perspective

Seeking clean energy as an alternative to traditional fossil fuels is the inevitable choice to realize the sustainable development of the society. Photocatalytic technique is considered a promising energy conversion approach to store the abundant solar energy into other wieldy energy carriers like chemical energy. Carbon dots, as a class of fascinating carbon nanomaterials, have already become the hotspots in numerous photoelectric researching fields and particularly drawn keen interests as metal-free photocatalysts owing to strong UV-vis optical absorption, tunable energy-level configuration, superior charge transfer ability, excellent physicochemical stability, facile fabrication, low toxicity, and high solubility. In this review, the classification, microstructures, general synthetic methods, optical and photoelectrical properties of carbon dots are systematically summarized. In addition, recent advances of carbon dots based photoinduced reactions including photodegradation, photocatalytic hydrogen generation, CO2 conversion, N2 fixation, and photochemical synthesis are highlighted in detail, deep insights into the roles of carbon dots in various systems combining with the photocatalytic mechanisms are provided. Finally, several critical issues remaining in photocatalysis field are also proposed.

Fabrication of Z-scheme Bi7O9I3/g-C3N4 heterojunction modified by carbon quantum dots for synchronous photocatalytic removal of Cr (Ⅵ) and organic pollutants

Chromium(VI) (Cr(VI)), a highly toxic metal ion, generally co-exists with organic pollutants in industrial effluents. The clean and effective technology for water purification is an imperative issue but still a challenging task. A series of Bi₇O₉I₃/g-C₃N₄ (BOI/CN) composites modified by lignin-derived carbon quantum dots (CQDs) were fabricated by hydrothermal method and applied for synchronous photocatalytic removal of Cr (Ⅵ) and levofloxacin (LEV). With the modification of CQDs in BOI/CN heterojunction, the 0.5-CQD/BOI/CN photocatalyst (0.5% content of CQDs) exhibited stronger light-harvesting capacity, more efficient charge separation, and faster electron transfer. Compared to those of BOI (51.2%), CN (36.8%), and BOI/CN (74.4%), the photoreduction efficiency of Cr(VI) reached up to 100% by 0.5-CQD/BOI/CN under 60 min of light irradiation, together with 94.8% degradation efficiency of LEV. The degradation of LEV was dominantly controlled by active species (•OH and •O₂^-) identified by electron paramagnetic resonance analysis and free radical trapping experiments. The intermediates of LEV were determined by LC-MS and the possible degradation pathway was speculated in combination with density functional theory calculation, involving defluorination, decarboxylation, quinolone rings opening, and piperazine moieties oxidation reactions. This work provides an advanced strategy for the fabrication of high-efficiency CQDs-based Z-scheme photocatalysts for environmental remediation.

Plasmonic Bi promotes the construction of Z-scheme heterojunction for efficient oxygen molecule activation

Reactive oxygen species (ROS) are essential to photocatalytic degradation of antibiotics in water. In this work, we prepared Ag₃PO₄/Bi@Bi₄Ti₃O₁₂ by simple in-situ reduction method and precipitation method, which improves the ability to capture visible light and increases the activity of photoinduced molecular oxygen activation, resulting in reactive oxygen species (ROS) such as superoxide radicals (•O₂^-), hydroxyl radicals (•OH), and H₂O₂. The excellent TC degradation efficiency derive from the SPR effect of the metal Bi on the surface enhances the light absorption intensity, and development of a Z-scheme heterojunction between Ag₃PO₄ and Bi₄Ti₃O₁₂ promotes the activation of molecular oxygen. A possible photodegradation mechanism of the as-prepared photocatalyst was proposed. This work provides an insight perspective to the synthesis photocatalysts with molecular oxygen activation for environmental remediation.

Decontamination of emerging pharmaceutical pollutants using carbon-dots as robust materials

Environmental pollution is a critical issue that requires proper measures to maintain environmental health in a sustainable and effective manner. The growing persistence of several active pharmaceutical residues, such as antibiotics like tetracycline, and anti-inflammatory drugs like diclofenac in water matrices is considered an issue of global concern. Numerous sewage/drain waste lines from the domestic and pharmaceutical sector contain an array of toxic compounds, so-called "emerging pollutants" and possess adverse effects on entire living ecosystem and damage its biodiversity. Therefore, effective solution and preventive measures are urgently required to sustainably mitigate and/or remediate pharmaceutically active emerging pollutants from environmental matrices. In this context, herein, the entry pathways of the pharmaceutical waste into the environment are presented, through the entire lifecycle of a pharmaceutical product. There is no detailed review available on carbon-dots (CDs) as robust materials with multifunctional features that support sustainable mitigation of emerging pollutants from water matrices. Thus, CDs-based photocatalysts are emerging as an efficient alternative for decontamination by pharmaceutical pollutants. The addition of CDs on photocatalytic systems has an important role in their performance, mainly because of their up-conversion property, transfer photoinduced electron capacities, and efficient separation of electrons and holes. In this review, we analyze the strategies followed by different researchers to optimize the photodegradation of various pharmaceutical pollutants. In this manner, the effect of different parameters such as pH, the dosage of photocatalyst, amount of carbon dots, and initial pollutant concentration, among others are discussed. Finally, current challenges are presented from a pollution prevention perspective and from CDs-based photocatalytic remediation perspective, with the aim to suggest possible research directions.

N,P-codoped carbon quantum dots-decorated TiO2 nanowires as nanosized heterojunction photocatalyst with improved photocatalytic performance for methyl blue degradation

N,P-doped carbon quantum dots (N,P-CQDs) are deemed as a promising candidate to environmentally friendly materials owing to the inexpensive, biocompatible nature. TiO₂ nanowire is a prospective photocatalyst because of its efficient migration of photoexcited carriers in wastewater treatment. However, the N,P-CQDs-decorated TiO₂ nanowire (N,P-CQDs/NW-TiO₂) photocatalysts have been rarely reported. In this study, we build N,P-CQDs on the surface of TiO₂ nanowires via a simple deposition process. Our investigations demonstrate that N,P-CQDs/NW-TiO₂ has a great photocatalytic degradation for methyl blue (MB) under irradiation. The degradation rate of can reach 93.6% within 120 min under proper conditions. The excellent degradation performance of N,P-CQDs/NW-TiO₂ is ascribed to the mesoporous structure and high separation rate of photoexcited carriers. In addition, the N,P-CQDs/NW-TiO₂ have outstanding recycled photocatalytic capability. After being recycled four times, the N,P-CQDs/NW-TiO₂ still maintain 59.9% photocatalytic activity. The fabricated nanosized photocatalyst can be widely utilized in the field of photocatalysis for wastewater treatment.

Graphene oxide modified screen-printed electrode for highly sensitive and selective electrochemical detection of ciprofloxacin residues in milk

The monitoring of antibiotic residues in foodstuffs by using rapid detection method is essential for food safety. In this work, the electrochemical sensor was developed by modification of screen-printed carbon electrode with graphene oxide, and then the ciprofloxacin (CIP) was detected based on the complexation of CIP with Mn2+. On modified electrode, the anodic stripping peak current response of Mn2+ was prohibited in the presence of CIP, and a peak current response of the complex was occurred. Thus, the peak current response of the complexation peak was employed as the indicating signal for CIP determination, which was more sensitive than the direct electrochemical oxidation response of CIP. Parameters that affect the signal response have been investigated in method. Under the optimum conditions, the peak current of the complexation peak was linearly correlated with the CIP content in the milk sample solution at 1.0 to 8.0 μM, and the linear correlation coefficients (R2) was 0.994. The limits of detection (LOD) was 0.30 μM. Recoveries of CIP in milk sample were ranged from 81.0 to 95.4% with relative standard deviations (RSDs) below 4.6%. The method showed high selectivity and sensitive, good reproducibility, indicated that this method has potential to be applied in CIP residue analysis.

BiVO4 prepared by the sol-gel doped on graphite felt cathode for ciprofloxacin degradation and mechanism in solar-photo-electro-Fenton

In this research, bismuth vanadate-doped graphite felt (GF-BiVO₄) was successfully prepared by sol-gel method, in which BiVO₄ owned superior electro-Fenton (EF) and solar-photo-electro-Fenton (SPEF) performance. Combined with the analysis by X-ray diffractometer (XRD), field emission transmission electron microscopy (FE-TEM), nitrogen adsorption-desorption isotherms and cyclic voltammetry (CV), the changes of electrodes were reflected in structure and physicochemical properties. The doping of monoclinic BiVO₄ endued GF with a higher surface area and more electro-active sites and better electrode activity in comparison to Raw-GF. Then, the GFs were used as cathodes to detect •OH concentration with coumarin (COU) as probe molecule and to evaluate photoelectric performance with ciprofloxacin (CIP) in photocatalysis, EF and SPEF processes. The results demonstrated that the concentration of •OH followed an order of SPEF> EF> photocatalysis, which was consistent with the removal rate of CIP (99.8%, 99.4% and 21.2%, respectively) on GF-BiVO₄ at 5 min. Further, five degradation pathways of CIP in SPEF system were proposed including the attack on piperazine ring, oxidation on cyclopropyl group, decarboxylation and hydroxyl radical addition, oxidation on benzene group and defluorination. The study provides insights into the enhancement of EF and SPEF performance and the degradation pathway of CIP in SPEF.

One-step synthesis of a carbon dot-based fluorescent probe for colorimetric and ratiometric sensing of tetracycline

Carbon dots (CDs) with blue fluorescence were synthesized using indole-3-butyric acid and l-tryptophan using a one-step hydrothermal method. The CDs were further employed as a fluorescent sensor with high selectivity for colorimetric and ratiometric detection of tetracycline (TC) in water. The limit of detection (LOD) was found to be 0.33 μM for TC with R² = 0.98387. Besides, the CDs could be applied in practical water samples and showed good recovery.

Hyper oxygen incorporation in CeF3: a new intermediate-band photocatalyst for antibiotic degradation under visible/NIR light

Intermediate-band semiconductors perform functions similar to natural photosynthesis by combining two photons to achieve a higher electron excitation. In this study, a strategy was developed to prepare a high oxygen-doped CeF₃ (CeF₃-O) nanomaterial that exhibits photocatalytic activity under visible/NIR light for the first time. The homogeneous doping oxygen atoms were verified to efficiently modify the band structure of CeF₃. DFT calculation predicted the formation of an intermediate band within CeF₃ upon homogeneous doping of O at interstitial sites. The interaction between F and O atoms generates an intermediate band, which divides the total bandgap of CeF₃-O into two sub-bandgaps at about 1.7 eV and 2.9 eV, enabling CeF₃-O photocatalysis under visible light and NIR light. Reflectance spectra evidenced that the same bandgaps exist. The photocatalytic activities of CeF₃-O were tested by wavelength-controlled light. The rate constants of TC-HCl photodegrading under visible/NIR light are 12.85 × 10⁻³ min⁻¹ and 1.28 × 10⁻³ min⁻¹, respectively. The two-step electron transfer was also obviously confirmed in visible-light photocatalysis. In conclusion, the high oxygen doping builds a more applicable band structure of CeF₃-O for photocatalytic performance, charge transfer and special light response for visible/NIR light.

Hyper doping O acts as a nonradiative center and generates an intermediate band with F atoms, exhibiting efficient photocatalysis activities under visible/NIR light.

Core-shell structured cadmium sulfide nanocomposites for solar energy utilization

Solar energy utilization technologies have been widely explored to solve the global energy crisis because the inexhaustible solar energy can be converted into chemical fuel and electricity. Various semiconductors that are crucial for solar energy utilization have been extensively developed. Among them, cadmium sulfide (CdS) has attracted extensive attention due to its suitable band-gap and excellent electrical/optical properties. However, CdS is still limited by rapid charge recombination, instability and low quantum efficiency. Core-shell structures can provide great opportunities for constructing advanced structures with superior properties to overcome the remaining challenges. This review focuses on the significant advances in core-shell structured CdS nanocomposites for solar energy utilization. Initially, the synthetic methods to construct core-shell structured CdS nanocomposites are reviewed. Then the applications in solar energy utilization are discussed, including photocatalytic\photoelectrochemical water splitting, photocatalytic CO₂ reduction and solar cells. Finally, the perspectives of core-shell structured CdS nanocomposites for solar energy utilization are proposed.

Facile Synthesis of Amorphous C3N4ZnxOy (x, y = 0.32–1.10) with High Photocatalytic Efficiency for Antibiotic Degradation

The development of novel, noble metal-free semiconductor catalysts with high efficiency is of great importance for the degradation of organic compounds. Among them, amorphous materials have been extensively studied for their unique and commercially useful properties. Here, a completely amorphous, noble metal-free photocatalyst C3N4ZnxOy (x, y = 0.32–1.10) was successfully synthesized from urea and ZnO by a simple high-temperature polymerization method. As the Zn content increased, the short-range ordered structures of the amorphous samples were still retained, as revealed by XPS, FTIR, and ssNMR. Meanwhile, the -CN3 structures were observed to be gradually destroyed, which may make the amorphous state more favorable for photocatalytic reactions. Compared with g-C3N4, the amorphous samples showed significantly reduced intensities in the photoluminescence spectra, indicating that the recombination rate of the photo-generated charge carriers was greatly reduced. It was confirmed that the optimized sample (C3N4Zn0.61O0.61) achieved a photocatalytic efficiency of 86.1% in the degradation of tetracycline hydrochloride under visible light irradiation within 1 h. This is about 2 times higher than that of both g-C3N4 and ZnO. This study emphasizes the importance of the amorphous structure in photocatalytic reactions, and this synthetic strategy may provide an effective model for designing other novel catalysts.

Surfactants-assisted preparation of BiVO4 with novel morphologies via microwave method and CdS decoration for enhanced photocatalytic properties

The development of a highly efficient and rapid method for the accurate preparation of photocatalysts with novel morphologies is a hot research topic. The different morphologies of BiVO₄ was prepared using surfactants-assisted microwave method, and demonstrated irregular (no surfactant), octahedral (sodium dodecyl benzene sulfonate), olive-like (polyvinylpyrrolidone) and hollow structures (ethylenediaminetetraacetic acid), respectively. The BiVO₄-CdS were synthesized using the chemical-bath-deposition method with different morphologies of BiVO₄ as the substrates. The hollow structure of BiVO₄ displayed the highest photocatalytic performance. Moreover, the photodegradation rates of the hollow structure BiVO₄-CdS on tetracycline hydrochloride and ciprofloxacin were about 1.8 and 1.5 times higher than the corresponding BiVO₄, indicating that the Z-scheme heterojunction can improve the photogenerated electron pairs separation efficiency. Furthermore, the regulation mechanism of morphology and energy-band position, as produced using the surfactants, has also been thoroughly investigated in this work, which provides a novel insight into the efficient and rapid preparation of photocatalysts with special morphology and high performance.

A procalcitonin photoelectrochemical immunosensor: NCQDs and Sb2S3 co-sensitized hydrangea-shaped WO3 as a matrix through a layer-by-layer assembly

Electron-transfer mechanism of a PEC immunosensor based on WO₃/NCQDs/Sb₂S₃ composites in PBS electrolytes containing AA.

Recent Advances in Functionalized Carbon Dots toward the Design of Efficient Materials for Sensing and Catalysis Applications

Since the past decade, enormous research efforts have been devoted to the detection/degradation and quantification of environmental toxic pollutants and biologically important molecules due to their ubiquitous necessity in the fields of environmental protection and human health. These fields of sensor and catalysis are advanced to a new era after emerging of nanomaterials, especially, carbon nanomaterials including graphene, carbon nanotube, carbon dots (C-dots), etc. Among them, the C-dots in the carbon family are rapidly boosted in the aspect of synthesis and application due to their superior properties of chemical and photostability, highly fluorescent with tunable, non/low-toxicity, and biocompatibility. The C-dot-based functional materials have shown great potential in sensor and catalysis fields for the detection/degradation of environmental pollutants. The major advantage of C-dots is that they can be easily prepared from numerous biomass/waste materials which are inexpensive and environment-friendly and are suitable for a developing trend of sustainable materials. This review is devoted to the recent development (since 2017) in the synthesis of biomass- and chemical-derived C-dots as well as diverse functionalization of C-dots. Their capability as a sensor and catalyst and respective mechanism are summarized. The future perspectives of C-dots are also discussed.

Recent Progress of Carbon Dot Precursors and Photocatalysis Applications

Carbon dots (CDs), a class of carbon-based sub-ten-nanometer nanoparticles, have attracted great attention since their discovery fifteen years ago. Because of the outstanding photoluminescence properties, photostability, low toxicity, and low cost, CDs have potential to replace traditional semiconductor quantum dots which have serious drawbacks of toxicity and high cost. This review covers the common top-down and bottom-up methods for the synthesis of CDs, different categories of CD precursors (small molecules, natural polymers, and synthetic polymers), one-pot and multi-step methods to produce CDs/photocatalyst composites, and recent advances of CDs on photocatalysis applications mostly in pollutant degradation and energy areas. A broad range of precursors forming fluorescent CDs are discussed, including small molecule sole or dual precursors, natural polymers such as pure polysaccharides and proteins and crude bio-resources from plants or animals, and various synthetic polymer precursors with positive, negative, neutral and hydrophilic, hydrophobic, or zwitterionic feature. Because of the wide light absorbance, excellent photoluminescence properties and electron transfer ability, CDs have emerged as a new type of photocatalyst. Recent work of CDs as sole photocatalyst or in combination with other materials (e.g., metal, metal sulfide, metal oxide, bismuth-based semiconductor, or other traditional photocatalysts) to form composite catalyst for various photocatalytic applications are reviewed. Possible future directions are proposed at the end of the article on mechanistic studies, production of CDs with better controlled properties, expansion of polymer precursor pool, and systematic studies of CDs for photocatalysis applications.

Performance of various catalysts on treatment of refractory pollutants in industrial wastewater by catalytic wet air oxidation: A review

The tremendous increase of industrialization and urbanization worldwide causes the depletion of natural resources such as water and air which urges the necessity to follow the environmental sustainability across the globe. This requires eco-friendly and economical technologies for depollution of wastewater and gases or zero emission approach. Therefore, in this context the treatment and reuse of wastewater is an environmental friendly approach due to shortage of fresh water. Catalytic wet air oxidation (CWAO) is a promising technology for the treatment of toxic and non-biodegradable organic pollutants in the wastewater generated from various industries. Various heterogeneous catalysts have been extensively used for treatment of various model pollutants such as phenols, carboxylic acids, nitrogenous compounds and different types of industrial effluents. The present review focuses on the literature published on the performances of various noble and non-noble metal catalysts for the treatment of various pollutants by CWAO. Reports on biodegradability enhancement of industrial wastewater containing toxic contaminants by CWAO are reviewed. Detailed discussion is made on catalyst deactivation and their mitigation study and also on the various factors which affects the CWAO reaction.