Monolayer grafting of aminosilane on magnetic nanoparticles: An efficient approach for targeted drug delivery system

Development and therapeutic evaluation of 5D3(CC-MLN8237)3.2 antibody-theranostic conjugates for PSMA-positive prostate cancer therapy

Prostate cancer (PC) is an aggressive cancer that can progress rapidly and eventually become castrate-resistant prostate cancer (CRPC). Stage IV metastatic castrate-resistant prostate cancer (mCRPC) is an incurable late-stage cancer type with a low 5-year overall survival rate. Targeted therapeutics such as antibody-drug conjugates (ADCs) based on high-affinity monoclonal antibodies and potent drugs conjugated via smart linkers are being developed for PC management. Conjugating further with in vitro or in vivo imaging agents, ADCs can be used as antibody-theranostic conjugates (ATCs) for diagnostic and image-guided drug delivery. In this study, we have developed a novel ATC for PSMA (+) PC therapy utilizing (a) anti-PSMA 5D3 mAb, (b) Aurora A kinase inhibitor, MLN8237, and (c) for the first time using tetrazine (Tz) and trans-cyclooctene (TCO) click chemistry-based conjugation linker (CC linker) in ADC development. The resulting 5D3(CC-MLN8237)3.2 was labeled with suitable fluorophores for in vitro and in vivo imaging. The products were characterized by SDS-PAGE, MALDI-TOF, and DLS and evaluated in vitro by optical imaging, flow cytometry, and WST-8 assay for cytotoxicity in PSMA (+/-) cells. Therapeutic efficacy was determined in human PC xenograft mouse models following a designed treatment schedule. After the treatment study animals were euthanized, and toxicological studies, complete blood count (CBC), blood clinical chemistry analysis, and H&E staining of vital organs were conducted to determine side effects and systemic toxicities. The IC50 values of 5D3(CC-MLN8237)3.2-AF488 in PSMA (+) PC3-PIP and PMSA (-) PC3-Flu cells are 8.17 nM and 161.9 nM, respectively. Pure MLN8237 shows 736.9 nM and 873.4 nM IC50 values for PC3-PIP and PC3-Flu cells, respectively. In vivo study in human xenograft mouse models confirmed high therapeutic efficacy of 5D3(CC-MLN8237)3.2-CF750 with significant control of PSMA (+) tumor growth with minimal systemic toxicity in the treated group compared to PSMA (-) treated and untreated groups. Approximately 70% of PSMA (+) PC3-PIP tumors did not exceed the threshold of the tumor size in the surrogate Kaplan-Meyer analysis. The novel ATC successfully controlled the growth of PSMA (+) tumors in preclinical settings with minimal systemic toxicities. The therapeutic efficacy and favorable safety profile of novel 5D3(CC-MLN8237)3.2 ATC demonstrates their potential use as a theranostic against aggressive PC.

Long-term pulmonary iron oxide nanoparticles exposure disrupts hepatic iron-lipid homeostasis and increases plaque vulnerability in ApoE-/- mice

Iron oxide nanoparticles (Fe3O4 NPs) have attracted great attention due to their extensive applications, which warranted their environmental concerns. Although recent advances have proposed the relevance of Fe3O4 NPs to cardiovascular disease, the intrinsic mechanisms underlying the effects of NPs remain indistinct. ApoE-/- mice were chosen as a long-term exposure model to explore the immanent association between respiratory exposure to Fe3O4 NPs and the development of cardiovascular diseases. Pulmonary exposure to 20 nm and 200 nm Fe3O4 NPS resulted in significant lung injury, and pulmonary histopathological examination displayed inflammatory cell infiltration, septal thickening and alveolar congestion. Intriguingly, liver iron deposition and variations in the hepatic lipid homeostasis were found in Fe3O4 NPs-exposed mice, eventually leading to dyslipidemia, hinting the potential cardiovascular toxicity of Fe3O4 NPs. In addition, we not only found that Fe3O4 NPs exposure increased aortic plaque area, but also increased M1 macrophages in the plaque, which yielding plaque vulnerability in ApoE-/- mice Of note, 20 nm Fe3O4 NPs showed enhanced capability on the progression of atherosclerosis than 200 nm Fe3O4 NPs. This study may propose the potential mechanism for adverse cardiovascular disease induced by Fe3O4 NPs and provide convincing evidence for the safety evaluation of Fe3O4 NPs.

Nanocarriers based novel and effective drug delivery system

Nanotechnology has ultimately come into the domain of drug delivery. Nanosystems for delivery of drugs are promptly emerging science utilizing different nanoparticles as carriers. Biocompatible and stable nanocarriers are novel diagnosis tools or therapy agents for explicitly targeting locates with controllable way. Nanocarriers propose numerous advantages to treat diseases via site-specific as well as targeted delivery of particular therapeutics. In recent times, there are number of outstanding nanocarriers use to deliver bio-, chemo-, or immuno- therapeutic agents to obtain effectual therapeutic reactions and to minimalize unwanted adverse-effects. Nanoparticles possess remarkable potential for active drug delivery. Moreover, conjugation of drugs with nanocarriers protects drugs from metabolic or chemical modifications, through their way to targeted cells and hence increased their bioavailability. In this review, various systems integrated with different types of nanocarriers (inorganic. organic, quantum dots, and carbon nanotubes) having different compositions, physical and chemical properties have been discussed for drug delivery applications.

Surface Biofunctionalization of Gadolinium Phosphate Nanobunches for Boosting Osteogenesis/Chondrogenesis Differentiation

In order to achieve smart biomedical micro/nanomaterials, promote interaction with biomolecules, improve osteogenic/chondrogenic differentiation, exhibit better dispersion in bone implants and ultimately maximize functionality, we innovatively and successfully designed and synthesized polymer PBLG-modified GdPO₄·H₂O nanobunches by hydroxylation, silylation and glutamylation processes. The effects of different feeding ratios on the surface coating of GdPO₄·H₂O with Si-OH, the grafting γ-aminopropyltriethoxysilane (APS) and the in situ ring-opening polymerization reaction of poly(g-benzyl-L-glutamate) (PBLG) were investigated, and the physical and chemical properties were characterized in detail. When GdPO₄·H₂O@SiO₂-APS:NCA = 4:1, the PBLG-g-GdPO₄·H₂O grafting rate was 5.93%, with good stability and dispersion in degradable polymeric materials. However, the MRI imaging signal was sequentially weakened as the modification process proceeded. Despite this, the biological effects had surprising findings. All the modifiers at appropriate concentrations were biocompatible and biologically active and the biomacromolecules of COL I and COL II in particular were expressed at least 3 times higher in GdPO₄·H₂O@SiO₂ compared to the PLGA. This indicates that the appropriate surface modification and functionalization of gadolinium-containing micro/nanomaterials can promote interaction with cells and encourage bone regeneration by regulating biomacromolecules and can be used in the field of biomedical materials.

Current progress of nanomedicine for prostate cancer diagnosis and treatment

Prostate cancer (PCa) is the most common new cancer case and the second most fatal malignancy in men. Surgery, endocrine therapy, radiotherapy and chemotherapy are the main clinical treatment options for PCa. However, most prostate cancers can develop into castration-resistant prostate cancer (CRPC), and due to the invasiveness of prostate cancer cells, they become resistant to different treatments and activate tumor-promoting signaling pathways, thereby inducing chemoresistance, radioresistance, ADT resistance, and immune resistance. Nanotechnology, which can combine treatment with diagnostic imaging tools, is emerging as a promising treatment modality in prostate cancer therapy. Nanoparticles can not only promote their accumulation at the pathological site through passive targeting techniques for enhanced permeability and retention (EPR), but also provide additional advantages for active targeting using different ligands. This property results in a reduced drug dose to achieve the desired effect, a longer duration of action within the tumor and fewer side effects on healthy tissues. In addition, nanotechnology can create good synergy with radiotherapy, chemotherapy, thermotherapy, photodynamic therapy and gene therapy to enhance their therapeutic effects with greater scope, and reduce the resistance of prostate cancer. In this article, we intend to review and discuss the latest technologies regarding the use of nanomaterials as therapeutic and diagnostic tools for prostate cancer.

Magnetic cross-linked enzyme aggregate based on ionic liquid modification as a novel immobilized biocatalyst for phytosterol esterification

Novel immobilized enzyme CRL-FIL-CLEAs@Fe3O4 with enhanced activities and stabilities was successfully prepared by a cross-linked lipase aggregate method for phytosterol esterification.

Colloidal Stability of Silica-Modified Magnetite Nanoparticles: Comparison of Various Dispersion Techniques

The production of stable and homogeneous batches during nanoparticle fabrication is challenging. Surface charging, as a stability determinant, was estimated for 3-aminopropyltriethoxysilane (APTES) coated pre-formed magnetite nanoparticles (MNPs). An important consideration for preparing stable and homogenous MNPs colloidal systems is the dispersion stage of pre-formed samples, which makes it feasible to increase the MNP reactive binding sites, to enhance functionality. The results gave evidence that the samples that had undergone stirring had a higher loading capacity towards polyanions, in terms of filler content, compared to the sonicated ones. These later results were likely due to the harsh effects of sonication (extremely high temperature and pressure in the cavities formed at the interfaces), which induced the destruction of the MNPs.

Antibody conjugated magnetic nanoparticle based colorimetric assay for the detection and quantification of aflatoxin B1 in wheat grains

Aflatoxin B1 (AFB1) is a most potent carcinogenic secondary metabolite produced by Aspergillus flavus. As a food safety concern, development of a rapid, cost effective, sensitive and easy to use method for the detection of aflatoxin is of prime requirement. In this study, AFB1 was conjugated with bovine serum albumin (BSA), and AFB1-BSA conjugate was purified by HPLC. Purification was confirmed by UV-Vis spectroscopy, FTIR and MALDI-TOF mass spectrometry. The polyclonal antibody was raised against AFB1-BSA conjugate in rabbit and purified by protein A sepharose and BSA sepharose affinity columns. Iron oxide nanoparticles (MNPs) were synthesised by co-precipitation method and their surface was functionalised with (3-aminopropyl) triethoxysilane (APTES). Size of APTES conjugated MNPs was determined by electron microscopy, and characterised by several biophysical techniques. The purified anti-AFB1 antibody was conjugated with surface functionalised MNPs and the conjugation was confirmed by determining the sizes of free and antibody conjugated MNPs by field emission scanning electron microscope where increase of particle sizes from 10-20 to 40-50 nm was observed due to antibody conjugation. Anti-AFB1 antibody conjugated MNPs were used for capturing AFB1 from the aflatoxin spiked wheat grains with a recovery percentage of more than 80% and used effectively five times. The captured AFB1 was then quantified by a sensitive colorimetric assay where colourless AFB1 was first converted into coumaric acid by NaOH. Subsequently, coumaric acid reacted with 2,6-dibromoquinone-4-chloroimide (DBQC) to a green-coloured indophenol product which was quantified spectrophotometrically. AFB1 contamination as low as 2 μg/kg in wheat grains was detected by the developed technique suggesting its potential application for both qualitative and quantitative analysis of aflatoxins present in feed and food materials.

Fabrication, Microstructure and Colloidal Stability of Humic Acids Loaded Fe3O4/APTES Nanosorbents for Environmental Applications

Nowadays, numerous researches are being performed to formulate nontoxic multifunctional magnetic materials possessing both high colloidal stability and magnetization, but there is a demand in the prediction of chemical and colloidal stability in water solutions. Herein, a series of silica-coated magnetite nanoparticles (MNPs) has been synthesized via the sol-gel method with and without establishing an inert atmosphere, and then it was tested in terms of humic acids (HA) loading applied as a multifunctional coating agent. The influence of ambient conditions on the microstructure, colloidal stability and HA loading of different silica-coated MNPs has been established. The XRD patterns show that the content of stoichiometric Fe₃O₄ decreases from 78.8% to 42.4% at inert and ambient atmosphere synthesis, respectively. The most striking observation was the shift of the MNPs isoelectric point from pH ~7 to 3, with an increasing HA reaching up to the reversal of the zeta potential sign as it was covered completely by HA molecules. The zeta potential data of MNPs can be used to predict the loading capacity for HA polyanions. The data help to understand the way for materials’ development with the complexation ability of humic acids and with the insolubility of silica gel to pave the way to develop a novel, efficient and magnetically separable adsorbent for contaminant removal.

Biocompatible Magnetic Colloidal Suspension Used as a Tool for Localized Hyperthermia in Human Breast Adenocarcinoma Cells: Physicochemical Analysis and Complex In Vitro Biological Profile

Magnetic iron oxide nanoparticles are the most desired nanomaterials for biomedical applications due to their unique physiochemical properties. A facile single-step process for the preparation of a highly stable and biocompatible magnetic colloidal suspension based on citric-acid-coated magnetic iron oxide nanoparticles used as an effective heating source for the hyperthermia treatment of cancer cells is presented. The physicochemical analysis revealed that the magnetic colloidal suspension had a z-average diameter of 72.7 nm at 25 °C with a polydispersity index of 0.179 and a zeta potential of −45.0 mV, superparamagnetic features, and a heating capacity that was quantified by an intrinsic loss power analysis. Raman spectroscopy showed the presence of magnetite and confirmed the presence of citric acid on the surfaces of the magnetic iron oxide nanoparticles. The biological results showed that breast adenocarcinoma cells (MDA-MB-231) were significantly affected after exposure to the magnetic colloidal suspension with a concentration of 30 µg/mL 24 h post-treatment under hyperthermic conditions, while the nontumorigenic (MCF-10A) cells exhibited a viability above 90% under the same thermal setup. Thus, the biological data obtained in the present study clearly endorse the need for further investigations to establish the clinical biological potential of synthesized magnetic colloidal suspension for magnetically triggered hyperthermia.

Magnetic nanoparticles applied in targeted therapy and magnetic resonance imaging: crucial preparation parameters, indispensable pre-treatments, updated research advancements and future perspectives

Magnetic nanoparticles (MNPs) have attracted much attention in cancer treatment as carriers for drug delivery and imaging contrast agents due to their distinctive performances based on their magnetic properties and nanoscale structure. In this review, we aim to comprehensively dissect how the applications of MNPs in targeted therapy and magnetic resonance imaging are achieved and their specificities by focusing on the following aspects: (1) several important preparation parameters (pH, temperature, ratio of the reactive substances, etc.) that have crucial effects on the properties of MNPs, (2) indispensable treatments to improve the biocompatibility, stability, and targeting ability of MNPs and prolong their circulation time for biomedical applications, (3) the mechanism for MNPs to deliver and release medicine to the desired sites and be applied in magnetic hyperthermia as well as related updated research advancements, (4) comparatively promising research directions of MNPs in magnetic resonance imaging, and (5) perspectives in the further optimization of their preparations, pre-treatments and applications in cancer diagnosis and therapy.

APTES monolayer coverage on self-assembled magnetic nanospheres for controlled release of anticancer drug Nintedanib

The use of an appropriate delivery system capable of protecting, translocating, and selectively releasing therapeutic moieties to desired sites can promote the efficacy of an active compound. In this work, we have developed a nanoformulation which preserves its magnetization to load a model anticancerous drug and to explore the controlled release of the drug in a cancerous environment. For the preparation of the nanoformulation, self-assembled magnetic nanospheres (MNS) made of superparamagnetic iron oxide nanoparticles were grafted with a monolayer of (3-aminopropyl)triethoxysilane (APTES). A direct functionalization strategy was used to avoid the loss of the MNS magnetization. The successful preparation of the nanoformulation was validated by structural, microstructural, and magnetic investigations. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) were used to establish the presence of APTES on the MNS surface. The amine content quantified by a ninhydrin assay revealed the monolayer coverage of APTES over MNS. The monolayer coverage of APTES reduced only negligibly the saturation magnetization from 77 emu/g (for MNS) to 74 emu/g (for MNS-APTES). Detailed investigations of the thermoremanent magnetization were carried out to assess the superparamagnetism in the MNS. To make the nanoformulation pH-responsive, the anticancerous drug Nintedanib (NTD) was conjugated with MNS-APTES through the acid liable imine bond. At pH 5.5, which mimics a cancerous environment, a controlled release of 85% in 48 h was observed. On the other hand, prolonged release of NTD was found at physiological conditions (i.e., pH 7.4). In vitro cytotoxicity study showed dose-dependent activity of MNS-APTES-NTD for human lung cancer cells L-132. About 75% reduction in cellular viability for a 100 μg/mL concentration of nanoformulation was observed. The nanoformulation designed using MNS and monolayer coverage of APTES has potential in cancer therapy as well as in other nanobiological applications.

Localization and Actuation for MNPs Based on Magnetic Field-Free Point: Feasibility of Movable Electromagnetic Actuations

Targeted drug delivery (TDD) based on magnetic nanoparticles (MNPs) and external magnetic actuation is a promising drug delivery technology compared to conventional treatments usually utilized in cancer therapy. However, the implementation of a TDD system at a clinical site based on considerations for the actual size of the human body requires a simplified structure capable of both external actuation and localization. To address these requirements, we propose a novel approach to localize drug carriers containing MNPs by manipulating the field-free point (FFP) mechanism in the principal magnetic field. To this end, we devise a versatile electromagnetic actuation (EMA) system for FFP generation based on four coils affixed to a movable frame. By the Biot-Savart law, the FFP can be manipulated by appropriately controlling the gradient field strength at the target area using the EMA system. Further, weighted-norm solutions are utilized to correct the positions of FFP to improve the accuracy of FFP displacement in the region of interest (ROI). As MNPs, ferrofluid is used to experiment with 2D and 3D localizations in a blocked phantom placed in the designed ROI. The resultant root mean square error of the localizations is observed to be approximately 1.4 mm in the 2D case and 1.6 mm in the 3D case. Further, the proposed movable EMA is verified to be capable of simultaneously scanning multiple points as well as the actuation and imaging of MNPs. Based on the success of the experiments in this study, further research is intended to be conducted in scale-up system development to design precise TDD systems at clinical sites.

Optimization of sonochemical method of functionalizing Amino-Silane on superparamagnetic iron oxide nanoparticles using Central Composite Design

Optimization of sonochemical method of functionalizing a Silane coupling agent, Amino-Silane on Superparamagnetic Iron Oxide Nanoparticles (SPION) using Central Composite Design is reported. The Amino-Silane is grafted on the SPION in an iced bath environment using a Vibra-Cell 20 kHz ultrasonic irradiator with 13 mm diameter horn. Throughout the experiment amplitude of the ultrasonic device is maintained at 47%. The percentage atomic compositions of various APTES elements which bind to the SPION due to the ultrasonic irradiation were determined using X-ray photoelectron spectrometer (XPS). The influence of ultrasonic irradiation time and amount of APTES required for facile, rapid and effective functionalization of Organo-metallic compound on SPION are optimized. The optimized sonication time and amount of APTES are 8.49 min and 3.40 ml, respectively. The predicted results were validated with experimental data. Using the optimized values APTES were functionalized on the SPION experimentally and the results were compared. The experimental results validate the predicted data. Results show that very minimum sonication time is required for effective grafting of APTES on SPION.

Magnetic solid-phase extraction based on nano-zeolite imidazolate framework-8-functionalized magnetic graphene oxide for the quantification of residual fungicides in water, honey and fruit juices

In this work, zeolite imidazolate framework-8 (ZIF-8) functionalized magnetic graphene oxide (Fe3O4@APTES-GO/ZIF-8) was successfully synthesized and used as a novel adsorbent in magnetic solid-phase extraction (MSPE) for the determination of four triazole fungicides in water, honey and fruit juices. The main parameters such as extraction time, amount of adsorbent, the pH value of the sample, ionic strength, and desorption solvent which could affect the experiment results were optimization. Under the optimum condition, the obtained linearity of this method ranged from 1 to 1000 µg L-1 for all analytes, with correlation coefficients (R2) ≥ 0.9914. Limit of detections (LODs) and limit of qualifications (LOQs) of four triazole fungicides were ranged from 0.014 to 0.109 µg L-1 and from 0.047 to 0.365 µg L-1, respectively. Based on comparison with outcomes from other studies, Fe3O4@APTES-GO/ZIF-8-MSPE could provide high performance and achieve satisfied results for the analysis of trace triazole fungicides in complicated matrices.

Preparation of ternary amino-functionalized magnetic nano-sized illite-smectite clay for adsorption of Pb(II) ions in aqueous solution

Ternary amino-functionalized magnetic illite-smectite (AMNI/S) nanocomposites were prepared via integrating two-dimensional illite-smectite nanoflakes (NI/S), magnetite nanoparticles (Fe₃O₄), and 3-aminopropyltriethoxysilane (APTES). The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM). The results show that Fe₃O₄ nanoparticles can be well dispersed on NI/S flakes and the hydrolyzed APTES molecules can simultaneously bond to the hydroxyl groups of Fe₃O₄ and NI/S. Due to the synergetic effect, magnetic NI/S composite can graft more amount of APTES molecules rather than Fe₃O₄ nanoparticles or NI/S alone. When the mass ratio of NI/S:Fe₃O₄ is 1:1, the saturation magnetization of AMNI/S-1 is 17.4 emu/g, facilitating the efficient magnetic separation in aqueous solution. Also, AMNI/S-1 shows a maximal adsorption amount of Pb(II) ions of 227.8 mg/g calculated by the Langmuir model. The effects of initial concentration of Pb(II) ions, pH value, adsorption time, and temperature on the adsorption amount of Pb(II) ions were investigated. The adsorption kinetic models and isotherm models were applied to analyze the adsorption of Pb(II) ions, respectively. The thermodynamic analysis reveals that the adsorption of Pb(II) onto AMNI/S-1 is spontaneous and endothermic in nature. The mechanism for the adsorption of Pb(II) ions onto AMNI/S-1 is due to the surface complexation of Fe₃O₄ and NI/S, and the chelation of amine groups (-NH₂). AMNI/S-1 can be efficiently reused and the regenerated AMNI/S-1 remains 82.91% of initial adsorption capacity after 6-cycle adsorption/desorption process. Thus, ternary AMNI/S-1 could be used as a prospective effective adsorbent.

Amphiphilic p-sulfonatocalix[6]arene based self-assembled nanostructures for enhanced clarithromycin activity against resistant Streptococcus Pneumoniae

Amphiphilic calixarenes are preferred to generate nano-cargos for drugs due to their stability, possibilities for modification and intrinsic host cavities. Here we are reporting the synthesis of amphiphilic calixarene and its evaluation as drug delivery system. Water soluble amphiphilic p-sulfonatocalix[6]arene was synthesized through sulfonation and lipophilic conjugation on its upper and lower rims respectively. The synthesized amphiphile self-assembled into nanostructures in the presence of Clarithromycin and FITC as model hydrophobic drugs followed by a wide range of characterization. Clarithromycin loaded self-assembled nanostructures was screened for its bactericidal potential in resistant S. pneumonia through various in-vitro assays. The amphiphilic calixarene self-assembled into polydispersed nanostructures with 136.45 ± 2.41 nm mean diameter and -49.93 ± 0.35 mV surface charges. The amphiphile was capable to load Clarithromycin (57.54 ± 1.88 %) and fluorescent dye and was highly stable. Clarithromycin loaded nanostructures revealed significant biofilm and bacterial growth inhibition and cell destruction properties. Results authenticate calixarene amphiphile as an efficient nano-carrier for improving Clarithromycin efficacy.

An integrated targeting drug delivery system based on the hybridization of graphdiyne and MOFs for visualized cancer therapy

Multimodal therapies have been regarded as promising strategies for cancer treatment as compared to conventional drug delivery systems that have various drawbacks in either low loading content, uncontrolled release, non-targeting or biotoxicity. We have developed a multifunctional three-dimensional tumor-targeting drug delivery system, Fe3O4@UIO-66-NH2/graphdiyne (FUGY), based on the hybridization of a novel two-dimensional material, graphdiyne (GDY), with a metal organic framework (MOFs) structure, Fe3O4@UIO-66-NH2 (FU). The FU MOF structure has superior ability for magnetic targeting, and was constructed by an in situ growth method in which it was surface-installed with GDY via amide bonds, as a carrier of anticancer drugs. The anticancer drug doxorubicin (DOX) was loaded onto FUGY and served as both an anticancer drug to treat the tumor and a fluorescence probe to ascertain the location of FUGY. The results show that FUGY exhibits a high drug loading content of 43.8% and an effective drug release around the tumor cells at pH 5.0. In particular, fluorescence imaging demonstrates that FUGY can deliver more anticancer drugs to tumor tissue than conventional drug delivery systems. Furthermore, FUGY exhibits superior therapeutic efficiencies with negligible side effects as compared to the direct administration of free DOX, both in vitro and in vivo. The obtained FUGY drug delivery system possesses ideal biocompatibility, sustained drug release, effective chemotherapeutic efficacy, and specific targeting abilities. Such a multimodal therapeutic system can facilitate new possibilities for multifunctional drug delivery systems.

Diosgenin-conjugated PCL–MPEG polymeric nanoparticles for the co-delivery of anticancer drugs: design, optimization, in vitro drug release and evaluation of anticancer activity

In this study, a polymeric nanoparticle-mediated dual anti-cancer drug delivery system was designed and developed.