CO2-responsive aqueous foams stabilized by pseudogemini surfactants

Switchable deep eutectic solvent as green and efficient media for liquid-phase microextraction of phenoxyacetic acid herbicides in water and food matrices

In this work, a switchable deep eutectic solvent (SDES) based on fatty acid and polyetheramine ion pair was prepared for liquid-phase microextraction (LPME) of phenoxyacetic acid herbicides in drinking water, beverage and honey matrices. The as-synthesized SDES equipped with an interesting characteristic of fast and reversible polarity switching, achieving homogeneous extraction and rapid bi-phase separation simultaneously. Several key parameters affecting the extraction performance were investigated comprehensively by Box-Behnken design. Under the optimal conditions, the method exhibited excellent linearity (15-4000 μg L-1), low detection limits (3-5 μg L-1), desirable precision (RSD < 8.1 %), and satisfactory recovery (72.6-98.7 %). More importantly, the introduction of SDES can simplify the pre-treatment procedure, shorten extraction time (4 min), and avoid the usage of traditional organic solvent during the whole extraction process. In addition, the switching mechanism of SDES was characterized by FT-IR and 1H NMR, and the forming mechanism of SDES was investigated using density-functional theory. The green of the method was estimated using the analytical ecological scale, the analytical green calculator, and the green analytical procedure index. The cytotoxicity of SDES was investigated and the result displayed that toxicity of the SDES was very low with the EC50 > 500 mg/L. Therefore, the proposed method was green and efficient and revealed considerable application prospects for the extraction of trace analytes from complex materials.

Switchable Pickering Emulsions Stabilized via Synergistic Nanoparticles-Superamphiphiles Effects and Rapid Response to CO2/N2

A CO2/N2-responsive emulsion provides milder reaction conditions, nontoxicity, and economic feasibility compared to other switchable surfactants. In this study, CO2/N2-responsive pickering emulsions were fabricated by using a compounded dispersion containing SiO2 nanoparticles (NPs) and superamphiphiles as the emulsifying agents. The synergistic effects of the SiO2 NPs and superamphiphiles significantly stabilized the emulsion at all of the tested concentrations and prevented complete phase separation of oil and water. The electrostatic interaction between the SiO2 NPs and superamphiphiles was disrupted after bubbling with CO2 for 30 s, resulting in the breaking of the emulsion. However, the dispersion recovered its interfacial activity after the introduction of N2 and again emulsified the emulsion. This reversible switching behavior was validated through three consecutive cycles of bubbling CO2/N2. The protonation and deprotonation of the SiO2 NPs and superamphiphiles in response to CO2/N2 facilitated reversible assembly and disassembly, which enabled the switching of the emulsions between inactive and active forms. The novel highly stable Pickering emulsions demonstrated rapid demulsification and emulsification in response to CO2/N2 and are promising for a wide range of applications.

Aqueous Binary Mixtures of Stearic Acid and Its Hydroxylated Counterpart 12-Hydroxystearic Acid: Fine Tuning of the Lamellar/Micelle Threshold Temperature Transition and of the Micelle Shape

This study examines the structures of soft surfactant-based biomaterials which can be tuned by temperature. More precisely, investigated here is the behavior of stearic acid (SA) and 12-hydroxystearic acid (12-HSA) aqueous mixtures as a function of temperature and the 12-HSA/SA molar ratio (R). Whatever R is, the system exhibits a morphological transition at a given threshold temperature, from multilamellar self-assemblies at low temperature to small micelles at high temperature, as shown by a combination of transmittance measurements, Wide Angle X-ray diffraction (WAXS), small angle neutron scattering (SANS), and differential scanning calorimetry (DSC) experiments. The precise determination of the threshold temperature, which ranges between 20 °C and 50 °C depending on R, allows for the construction of the whole phase diagram of the system as a function of R. At high temperature, the micelles that are formed are oblate for pure SA solutions (R = 0) and prolate for pure 12-HSA solutions (R = 1). In the case of mixtures, there is a progressive continuous transition from oblate to prolate shapes when increasing R, with micelles that are almost purely spherical for R = 0.33.

Advances in CO2-switchable surfactants towards the fabrication and application of responsive colloids

CO₂-switchable surfactants have selective surface-activity, which can be activated or deactivated either by adding or removing CO₂ from the solution. This feature enables us to use them in the fabrication of responsive colloids, a group of dispersed systems that can be controlled by changing the environmental conditions. In chemical processes, including extraction, reaction, or heterogeneous catalysis, colloids are required in some specific steps of the processes, in which maximum contact area between immiscible phases or reactants is desired. Afterward, the colloids must be broken for the postprocessing of products, solvents, and agents, which can be facilitated by using CO₂-switchable surfactants in surfactant-stabilized colloids. These surfactants are mainly cationic and can be activated by the protonation of a nitrogen-containing group upon sparging CO₂ gas. Also, CO₂-switchable superamphiphiles can be formed by non-covalent bonding between components at least one of which is CO₂-switchable. So far, CO₂-switchable surfactants have been used in CO₂-switchable spherical and wormlike micelles, vesicles, emulsions, foams, and Pickering emulsions. Here, we review the fabrication procedure, chemical structure, switching scheme, stability, environmental conditions, and design philosophy of such responsive colloids. Their fields of application are wide, including emulsion polymerization, catalysis, soil washing, drug delivery, extraction, viscosity control, and oil transportation. We also emphasize their application for the CO₂-assisted enhanced oil recovery (EOR) process as a promising approach for carbon capture, utilization, and storage to combat climate change.

Molecular structure-tuned stability and switchability of CO2-responsive oil-in-water emulsions

HYPOTHESIS

Pseudo-Gemini surfactants (PGS) possessing switchable and recyclable features have drawn increasing attention on generating high-performance CO₂-responsive emulsions for wide range and versatile applications. However, there is a lack of fundamental understanding on how the molecular structure of PGS affects the stability and switchability of emulsions. We hypothesize that the length and type of the spacer in PGS play a decisive role in controlling interfacial and switching properties.

EXPERIMENTS

Two series of PGS with different spacers were prepared through electrostatic association between amines and oleic acid. The interfacial activity and CO₂-responsive properties of corresponding emulsions were systematically investigated by well-designed experiments and molecular dynamics simulations.

FINDINGS

Increasing the spacer length to allow the bent configuration leads to more tight arrangement of oleic molecules, consequently improving the interfacial activity. In addition, the introduction of amino group into the spacer dramatically promotes CO₂ response of resulting PGS due to ehanced migration of the spacer from the interface to the aqueous phase after CO₂ addition. These results are inspiring in designing controllable CO₂-responsive emulsions for a wide range of industrial applications (e.g., enhanced oil recovery and oil-contaminated soil remediation).

A Dual pH‐ and Light‐Responsive Spiropyran‐Based Surfactant: Investigations on Its Switching Behavior and Remote Control over Emulsion Stability

A cationic surfactant containing a spiropyran unit is prepared exhibiting a dual‐responsive adjustability of its surface‐active characteristics. The switching mechanism of the system relies on the reversible conversion of the non‐ionic spiropyran (SP) to a zwitterionic merocyanine (MC) and can be controlled by adjusting the pH value and via light, resulting in a pH‐dependent photoactivity: While the compound possesses a pronounced difference in surface activity between both forms under acidic conditions, this behavior is suppressed at a neutral pH level. The underlying switching processes are investigated in detail, and a thermodynamic explanation based on a combination of theoretical and experimental results is provided. This complex stimuli‐responsive behavior enables remote‐control of colloidal systems. To demonstrate its applicability, the surfactant is utilized for the pH‐dependent manipulation of oil‐in‐water emulsions.

Smart ultra-stable foams stabilized using cellulose nanocrystal (CNC) gels via noncovalent bonding

Smart ultra-stable foams stabilized by cellulose nanocrystal (CNC)-based gels were fabricated. The stabilization is ascribed to the dense films and three-dimensional networks at the interface and in the bulk induced by the charge shielding effect and electrostatic attraction between protonated bis(2-hydroxyethyl)oleylamine (BOA-H⁺) micelles and negatively charged CNC colloids. The as-prepared foam could maintain its morphology without breaking or drainage for two months, showing high stability. Outstanding CO₂/N₂ reversibility endows the system with on-demand control of foaming/defoaming, which is necessary in many aspects. The functionalized foam is expected to open up an opportunity for the design of intelligent oilfield chemicals and extinguishant systems.

Pickering foams and parameters influencing their characteristics

Pickering foams are available in many applications and have been continually gaining interest in the last two decades. Pickering foams are multifaceted, and their characteristics are highly dependent on many factors, such as particle size, charge, hydrophobicity and concentration as well as the charge and concentration of surfactants and salts available in the system. A literature review of these individual studies at first might seem confusing and somewhat contradictory, particularly in multi-component systems with particles and surfactants with different charges in the presence of salts. This paper provides a comprehensive overview of particle-stabilized foams, also known as Pickering foams and froths. Underlying mechanisms of foam stabilization by particles with different morphology, surface chemistry, size and type are reviewed and clarified. This paper also outlines the role of salts and different factors such as pH, temperature and gas type on Pickering foams. Further, we highlight recent developments in Pickering foams in different applications such as food, mining, oil and gas, and wastewater treatment industries, where Pickering foams are abundant. We conclude this overview by presenting important research avenues based on the gaps identified here. The focus of this review is limited to Pickering foams of surfactants with added salts and does not include studies on polymers, proteins, or other macromolecules.

Advanced Switchable Molecules and Materials for Oil Recovery and Oily Waste Cleanup

Advanced switchable molecules and materials have shown great potential in numerous applications. These novel materials can express different states of physicochemical properties as controlled by a designated stimulus, such that the processing condition can always be maintained in an optimized manner for improved efficiency and sustainability throughout the whole process. Herein, the recent advances in switchable molecules/materials in oil recovery and oily waste cleanup are reviewed. Oil recovery and oily waste cleanup are of critical importance to the industry and environment. Switchable materials can be designed with various types of switchable properties, including i) switchable interfacial activity, ii) switchable viscosity, iii) switchable solvent, and iv) switchable wettability. The materials can then be deployed into the most suitable applications according to the process requirements. An in-depth discussion about the fundamental basis of the design considerations is provided for each type of switchable material, followed by details about their performances and challenges in the applications. Finally, an outlook for the development of next-generation switchable molecules/materials is discussed.

Soybean-Oil-Based CO2-Switchable Surfactants with Multiple Heads

Oligomeric surfactants display the novel properties of low surface activity, low critical micellar concentration and enhanced viscosity, but no CO2 switchable oligomeric surfactants have been developed so far. The introduction of CO2 can convert tertiary amine reversibly to quaternary ammonium salt, which causes switchable surface activity. In this study, epoxidized soybean oil was selected as a raw material to synthesize a CO2-responsive oligomeric surfactant. After addition and removal of CO2, the conductivity analyzing proves that the oligomeric surfactant had a good response to CO2 stimulation. The viscosity of the oligomeric surfactant solution increased obviously after sparging CO2, but returned to its initial low viscosity in the absence of CO2. This work is expected to open a new window for the study of bio-based CO2-stimulated oligomeric surfactants.

Role of Surfactants Based on Fatty Acids in the Wetting Behavior of Solid-Oil-Aqueous Solution Systems

Surfactants based on fatty acids have attracted extensive attention thanks to their eco-friendly and pH-responsive features. Here, we studied two fatty acid-based surfactants that were paired with the same organic counterion but distinguished by their aliphatic chain lengths (monoethanolamine-oleic acid (MEA-OA) and monoethanolamine-lauric acid (MEA-LA)). Both surfactants exhibited the ability to lower the oil-water interfacial tension but lost their interfacial activity in a low-pH environment. We experimentally investigated their influence on the receding and spreading of oil droplets on solid surfaces. It was found that the interfacial tension reduction could decrease the static contact angle of the aqueous phase and hindered displacement dynamics during the oil droplet receding. Meanwhile, the interfacial activity was more likely to suppress the initiation of the oil droplet spreading due to the more stable thin-film forming prior to the spreading process. Nevertheless, the experimental results also exhibited that MEA-OA was more effective than MEA-LA in suppressing the receding dynamics and the spreading initiation even when they were characterized by similar interfacial tension values. Such an interesting observation could be attributed to the more considerable Marangoni flow in the solution of MEA-OA whose molecules have longer aliphatic chains. The insight from this study is expected to improve the knowledge on the molecular design for more efficient applications of fatty acid-based surfactants.

pH-responsive pickering foam created from self-aggregate polymer using dynamic covalent bond

HYPOTHESIS

Responsive surfactant systems based on dynamic covalent bond exhibit an unsatisfactory foamability and foam stability, despite their documented functionality in emulsions. As such we anticipate that the foaming performance should be improved by introducing Pickering effect, which is possible when the responsiveness of the dynamic covenant bonds controls not only the hydrophobicity of polymers but also their aggregation behavior (to form nanoparticles).

EXPERIMENTS

Here we created surface active nanoparticles made from self-aggregated polymers consisting of PAH (polyallylamine hydrochloride)-BA (benzaldehyde). The covalent imine bonds between originally hydrophilic PAH and hydrophobic BA are dynamic in that their formation and breakage is a function of solution pH, confirmed by ¹H NMR and dynamic interfacial tension measurement.

FINDINGS

At pH 7.4, a stable foam is achieved in the PAH-BA (amino to aldehyde ratio at 1:0.2) solution; while at pH 2.5, it defoams due to breakage of dynamic bonds corresponding to the measured diminishing surface activity. The reversibility of foaming-defoaming has been demonstrated by alternatively changing pH for multiple cycles, with the foaming performance persistent. The foam stability can be improved by more hydrophobic compounds e.g. at a lower amino to aldehyde ratio or using PAH-cinnamaldehyde (CA). The reversible and responsive foaming demonstrated in a Pickering system provides a new method to create novel foaming systems with properties desirable to many applications.

N2-foam-assisted CO2 huff-n-puff process for enhanced oil recovery in a heterogeneous edge-water reservoir: experiments and pilot tests

The CO2 huff-n-puff process is an effective method to enhance oil recovery; however, its utilization is limited in heterogenous edge-water reservoirs due to the severe water channeling. Accordingly, herein, a stable N2 foam is proposed to assist CO2 huff-n-puff process for enhanced oil recovery. Sodium dodecyl sulfate (SDS) and polyacrylamide (HPAM) were used as the surfactant and stabilizer, respectively, and 0.3 wt% of SDS + 0.3 wt% of HPAM were screened in the laboratory to generate a foam with good foamability and long foam stability. Subsequently, dynamic foam tests using 1D sand packs were conducted at 65 °C and 15 MPa, and a gas/liquid ratio (GLR) of 1 : 1 was optimized to form a strong barrier in high permeable porous media to treat water and gas channeling. 3D heterogeneous models were established in the laboratory, and N2-foam-assisted CO2 huff-n-puff experiments were conducted after edge-water driving. The results showed that an oil recovery of 13.69% was obtained with four cycles of N2-foam-assisted CO2 injection, which is twice that obtained by the CO2 huff-n-puff process. The stable N2 foam could temporarily delay the water and gas channeling, and subsequently, CO2 fully extracted the remaining oil in the low permeable zones around the production well. Pilot tests were conducted in 8 horizontal wells, and a total oil production of 1784 tons with a net price value (NPV) of $240 416.26 was obtained using the N2-foam-assisted CO2 huff-n-puff process, which is a profitable method for enhanced oil recovery in heterogenous reservoirs with edge water.

Highly stable and thermo-responsive gel foams by synergistically combining glycyrrhizic acid nanofibrils and cellulose nanocrystals

HYPOTHESIS

Natural saponin glycyrrhizic acid (GA) and GA nanofibrils (GNFs) are effective foaming agents for formulation of aqueous food-grade foams. Through the synergistic combination of soft semiflexible GNFs with rigid nanofiller cellulose nanocrystals (CNCs), it should be possible to create advanced composite foams with a more complex structure and diverse properties including high stability and stimuli responsiveness.

EXPERIMENTS

Foams containing mixtures of GNFs and CNCs were prepared, and their formation and stability were investigated. A range of microscopy techniques and small deformation oscillatory shear were adopted to examine the microstructure and viscoelasticity of foams, and a stabilization mechanism for highly stable foams was then established. Further, the temperature-responsive destabilization of foams was evaluated.

FINDINGS

CNCs are homogeneously distributed in the architecture and mechanically reinforce the GNF fibrillar network, leading to a highly viscoelastic composite network in the continuous phase of foams, which is the key factor responsible for their high stability. Such ultra-stable gel foams display tunable thermo-responsive behavior and a rapid on-demand destabilization upon heating by inducing a phase transition of the bulk composite network. Our work opens up new scenarios on the use of a novel combination of all-natural, sustainable nanoscale building blocks to develop aqueous "superfoams" which are highly stable, stimulable and processable.

Physicochemical Properties of Acylglutamic Acid-Alkylamine Complexes in Aqueous Media

We studied the physicochemical properties of 1:1 stoichiometric complexes of acylglutamic acids (CnGlu) with tertiary alkylamines (CnDMA) in water at their low and high concentrations. Static surface tensiometry suggested that the critical micelle concentration (cmc) decreased with increasing hydrophobic chain length of the complexes. In addition, CnGlu-CnDMA yielded lower cmc than the C12Glu single system. In the region of high concentrations, several phase states including isotropic liquid (L₁) phase, hexagonal liquid crystal (H₁) phase, bicontinuous cubic liquid crystal (V₁) phase, and lamellar liquid crystal (L_α) phase were observed. Assemblies with lesser positive curvature tend to be formed with increasing complex concentration, increasing temperature, and increasing hydrophobic chain length. Additionally, the complex formation resulted in the molecular assemblies with lesser positive curvature.

CO2/N2-responsive oil-in-water emulsions using a novel switchable surfactant

HYPOTHESIS

Recently, switchable or stimuli-responsive emulsions have attracted much research interest in many industrial fields. In this work, a novel CO₂/N₂-responsive surfactant was designed and developed to facilitate the formation of switchable oil-in-water (O/W) emulsions with fast switching characteristics between a stable emulsion and separate phases upon alternatively bubbling CO₂ and N₂.

EXPERIMENTS

The novel CO₂/N₂-responsive surfactant was facilely prepared by mixing an anionic fatty acid (oleic acid) and a cationic amine (1,3-Bis (aminopropyl) tetramethyldisiloxane) at a 1:1 molecular ratio, which was assembled based on electrostatic interactions. The structure and properties of the novel CO₂/N₂-responsive switchable surfactant were investigated by Fourier-transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR) spectroscopy, and interfacial tensions.

FINDINGS

The developed surfactant shows an excellent interfacial activity at the oil/water interface, which can significantly reduce the dosage of the switchable surfactant compared with previous CO₂/N₂-responsive surfactants. The dynamic interfacial tension of n-decane and aqueous phase decreased from 45 mN m^-1 to 5 mN m^-1 within 100 s with the addition of 0.2 mM surfactant. In this work, a low concentration of the novel switchable surfactant (e.g., 20.0 mM) can realize reversible emulsification and demulsification in an emulsion system as compared with the high dosage (e.g., ~150 mM) in previous reports, which will bring huge economic benefits in industrial applications in the future. Moreover, this work expands the family of ion-pair surfactants to small amino-functionalized molecules beyond Jeffamine D-230, which promotes the development of simple and switchable ion-pair surfactant. It is found that the O/W emulsions stabilized by the switchable surfactant show excellent stability, which can be stored for over 60 days at room temperature without any obvious change. Interestingly, the stable O/W emulsion is completely demulsified upon bubbling CO₂ for 30 s and can be easily re-emulsified to the initial state after purging N₂ at 60 °C within 10 min, which demonstrates a rapid and highly efficient switching behavior. The reversible emulsification and demulsification process is ascribed to the reversible assembly and disassembly of the switchable surfactant, which is induced by the removal and purge of CO₂.

Recent advances in soft functional materials: preparation, functions and applications

Synthetic materials and biomaterials with elastic moduli lower than 10 MPa are generally considered as soft materials. Research studies on soft materials have been boosted due to their intriguing features such as light-weight, low modulus, stretchability, and a diverse range of functions including sensing, actuating, insulating and transporting. They are ideal materials for applications in smart textiles, flexible devices and wearable electronics. On the other hand, benefiting from the advances in materials science and chemistry, novel soft materials with tailored properties and functions could be prepared to fulfil the specific requirements. In this review, the current progress of soft materials, ranging from materials design, preparation and application are critically summarized based on three categories, namely gels, foams and elastomers. The chemical, physical and electrical properties and the applications are elaborated. This review aims to provide a comprehensive overview of soft materials to researchers in different disciplines.

Hydrophobic mesoporous silicon dioxide for improving foam stability

In this study, mesoporous SiO₂ nanoparticles (MSNs) were synthesized via a sol–gel method and modified with (3-chloropropyl) trimethoxysilane to make them hydrophobic (MMSNs). The material was characterized via SEM, TEM, FT-IR, DLS, BET and contact angle measurements. The MMSNs have good foam stability, so that the foam properties of the added particles have been increased by 38.4% in an oil/SDS solution. Simultaneously, it becomes a promising material for foam stabilization in order to enhance the oil recovery because it is bio-compatibile and environment friendly. Also, it provides a novel application-stable foam for mesoporous materials.

In this study, mesoporous SiO₂ nanoparticles (MSNs) were synthesized via a sol–gel method and modified with (3-chloropropyl) trimethoxysilane to make them hydrophobic (MMSNs).

pH-Switchable IFT variations and emulsions based on the dynamic noncovalent surfactant/salt assembly at the water/oil interface

Additional HCl can facilely control the dynamic noncovalent interaction between anionic surfactant sodium dodecyl benzene sulfonate (SDBS) and additional organic matter, 4,4'-oxydianiline (ODA), at the water/oil interface. At low HCl concentration (ODA/HCl molar ratio (r) = 1 : 1.5, [ODA] = 250 mg L-1), the ODA+ ions effectively enhanced the SDBS ability to reduce the water/oil interfacial tension (IFT) by about two orders of magnitude, while the (SDBS)2/ODA2+ gemini-like surfactants could be constructed at a relatively high HCl concentration (r = 1 : 4, [ODA] = 250 mg L-1), which could largely reduce the IFT to 1.19 × 10-3 mN m-1. Molecular simulation was employed to explore the interfacial activity of ODAn+ (ODA+/ODA2+) ions and the SDBS/ODAn+ interaction. The control experiments used another three surfactants to verify the proposed model. The pH-switchable gradual protonation of amino groups in ODA molecules determined the SDBS/ODA interfacial assembly, which was responsible for the reversal of IFT variations and the related emulsion behaviors.